2AUIVTTCVISION312Vision 312

Vision 312 User Manual Product Version 00.09 Original Instructions Document type:User Manual Document number:D-156-G-02-001 Document revision:0.7.1 Document date:2020-03-16 Security:Corporate confidential Status:Released TTControl GmbH Schoenbrunner Str. 7, A-1040 Vienna, Austria,Tel. +43 1 585 34 34 – 0, Fax +43 1 585 34 34 – 90,[email protected] No part of the document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the written permission of TTControl GmbH. Company or product names mentioned in this document may be trademarks or registered trademarks of their respective holders. TTControl GmbH undertakes no further obligation or relation to this document. © TTControl GmbH 2020. All rights reserved. Confidential and Proprietary Information Subject to changes and corrections. TABLE OF CONTENTS Table of Contents Table of Contents1 Disclaimer4 1 General description5 1.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2 Notation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.3 Advanced programming possibilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.4 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.4.1 System components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.4.2 Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.4.3 Physical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.4.4 Block diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.4.4.1 Vision 312. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.4.4.2 Vision 312Plus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2 Instructions for safe operation9 2.1 General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.2 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.3 Improper use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.4 Checks to be done before commissioning the device. . . . . . . . . . . . . . . . . . . . . . . 10 2.5 Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3 Standards and guidelines11 4 Standard compliance12 4.1 Regulatory information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5 Connectors and pins13 5.1 Available connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 5.2 Main Connector (C1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5.3 100BASE-T1 and 100BASE-TX connector (A). . . . . . . . . . . . . . . . . . . . . . . . . . . 15 5.4 USB OTG connector (B) and USB HOST connector (D). . . . . . . . . . . . . . . . . . . . . 16 5.5 Connector (C). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6 Specification of inputs and outputs17 6.1 Positive power supply (BAT+). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6.1.1 Pinout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6.1.2 Functional description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6.1.2.1 Undervoltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6.1.3 Maximum ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6.1.4 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 6.1.4.1 Vision 312. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 6.1.4.2 Vision 312Plus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 6.2 Negative power supply (BAT-). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6.2.1 Pinout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6.2.2 Functional description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6.2.3 Maximum ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6.3 Ignition on switch input (Terminal 15). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6.3.1 Pinout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6.3.2 Functional description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6.3.3 Power on/off sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6.3.4 Maximum ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 © TTControl GmbH 2020. All rights reserved. Confidential and Proprietary Information 1 Document Number: D-156-G-02-001 TABLE OF CONTENTS 6.3.5 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 6.4 External Wake-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 6.4.1 Pinout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 6.4.2 Functional description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 6.4.3 Maximum ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 6.4.4 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 6.5 Service Enable. . . . . . . . . . . . . . . . . . . . . . . . . . . . …

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 2020-03-16 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b) (4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2AUIVTTCVISION312 Vision 312 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual 20 Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name / Title: Michael Voglhuber Company: TTControl GmbH Address: Schoenbrunner Strasse 7, 1040 Vienna, Austria Phone: +43 1 585 3434 5051 Fax: +43 1 585 3434 90 E-Mail: [email protected]

TTControl GmbH Schoenbrunner Str. 7, A-1040 Vienna, Austria, Tel. + 43 1 585 34 34-0, Fax +43 1 585 34 34-90, [email protected] No part of the document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the written permission of TTControl GmbH. Company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies. TTControl GmbH undertakes no further obligation in relation to this document. © 2020 TTControl GmbH. All rights reserved. Subject to change and corrections . Vision 312 Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Declaration of Model Differences Letter Reference: Vision 312 Security: Public Document number: D-156-TR-02-007 Version: 1.0.0 Date: 2020-03-11 Status: Released Review: Sindrak 3 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Declaration of Model Differences Letter Version: 1.0.0 Page Last Change: 2020-03-11 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-007 TTControl GmbH Public Information. History of Changes Version Date Person Modification 0.0.1 2019 MVO Creation of TTControl template 1.0.0 2020-03-11 MVO Initial Version 4 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Declaration of Model Differences Letter Version: 1.0.0 Page Last Change: 2020-03-11 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-007 TTControl GmbH Public Information. Table of Contents 1 Overview ................................................................................................................................ 5 2 Objective ................................................................................................................................ 5 3 47 CFR $ 2.1033 (b) ............................................................................................................... 5 3.1 Declaration of Model Differences ..................................................................................... 5 List of Figures Figure 1: Product Vision 312 ........................................................................................................... 5 List of Tables Table 1: System Component Difference .......................................................................................... 6 Table 2: Interface Difference ........................................................................................................... 6 5 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Declaration of Model Differences Letter Version: 1.0.0 Page Last Change: 2020-03-11 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-007 TTControl GmbH Public Information. 1 Overview The purpose of this document is to provide the required data and information as required per FCC Title 47, Chapter I, Subchapter A, Part 2, Subpart J, §2.1033 – “Application for Certification” – Declaration of Model Differences Letter for the product “Vision 312”, that shall be FCC certified. 2 Objective The device that shall be certified is identified as follows: Device Description: Vision 312 Hardware Identification: H-156-P-02-003 Serial Number: V3xxxxxxxxxxxx FCC-ID: 2AUIVTTCVISION312 Date of Manufactory: xx/20xx Device that the certification is applied for: Figure 1: Product Vision 312 3 47 CFR $ 2.1033 (b) 3.1 Declaration of Model Differences There are two different variants of the product. The following two tables show the most different components and interfaces of the Vision 312 product. 6 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Declaration of Model Differences Letter Version: 1.0.0 Page Last Change: 2020-03-11 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-007 TTControl GmbH Public Information. 3.1.1 System Components Vision 312 Vision 312Plus CPU i.MX 6Solo Processor 800 MHz – ARM Cortex-A9 (single core) i.MX 6QuadPlus Processor 1 GHz – ARM Cortex-A9 (quad core) DDR3 RAM 512 MB 2 GB eMMC Flash 4 GB 8 GB Display 12.1”, 1280x800, 500 cd/m2 luminance, 1000:1 contrast ratio 12.1”, 1280x800, 1000 cd/m2 luminance, 1000:1 contrast ratio Touchscreen Yes Yes Bonding Fully bonded Fully bonded Speaker Integrated Integrated Real-time clock 1 1 Non-volatile memory 32 kByte EEPROM 32 kByte EEPROM Table 1: System Component Difference 3.1.2 Interfaces Vision 312 Vision 312Plus CAN 2 4 (1 ISOBUS compliant) Analog video input 2 (PAL / NTSC) 4 (PAL / NTSC) USB 1 (OTG) 2 (1 OTG / 1 HOST) Ethernet 1 (100BASE-T1) 1 (100BASE-TX) RS-232 1 1 Terminal 15 1 1 Wake-up 1 1 Temperature sensor 2 2 Status LED 1 (RGB) 1 (RGB) Ambient light sensor 1 1 Table 2: Interface Difference 7 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Declaration of Model Differences Letter Version: 1.0.0 Page Last Change: 2020-03-11 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-007 TTControl GmbH Public Information. Abbreviations and Acronyms Abbr. / Term Meaning 100BASE-T1 BroadR-Reach 100BASE-TX Ethernet eMMC Embedded MultiMediaCard CAN Controller Area Network CPU Central Processing Unit DDR3 Double Data Rate 3 EEPROM Electrically Erasable Programmable Read-Only Memory FCC Federal Communications Commission NTSC National Television System Committee OTG On-The-Go PAL Phase Alternting Line USB Universal Serial Bus Glossary Abbr. / Term Meaning 8 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Declaration of Model Differences Letter Version: 1.0.0 Page Last Change: 2020-03-11 © 2020 TTControl GmbH. All rights reserved. Doc…

Text truncated - open the document above for the full version.

TTControl GmbH Schoenbrunner Str. 7, A-1040 Vienna, Austria, Tel. + 43 1 585 34 34-0, Fax +43 1 585 34 34-90, [email protected] No part of the document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the written permission of TTControl GmbH. Company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies. TTControl GmbH undertakes no further obligation in relation to this document. © 2020 TTControl GmbH. All rights reserved. Subject to change and corrections . Vision 312 Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Exterior Photographs Reference: Vision 312 Security: Public Document number: D-156-TR-02-004 Version: 1.0.0 Date: 2020-03-10 Status: Released Review: Sindrak 3 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Exterior Photographs Version: 1.0.0 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-004 TTControl GmbH Public Information. History of Changes Version Date Person Modification 0.0.1 2019 MVO Creation of TTControl template 1.0.0 2020-03-10 MVO Initial version 4 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Exterior Photographs Version: 1.0.0 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-004 TTControl GmbH Public Information. Table of Contents 1 Overview ................................................................................................................................ 5 2 Objective ................................................................................................................................ 5 3 47 CFR $ 2.1033 (b) ............................................................................................................... 5 3.1 (7): Exterior Photographs ................................................................................................. 5 3.1.1 Front View ................................................................................................................... 6 3.1.2 Top View ..................................................................................................................... 6 3.1.3 Bottom View ................................................................................................................ 6 3.1.4 Right View ................................................................................................................... 7 3.1.5 Left View ...................................................................................................................... 7 3.1.6 Rear View .................................................................................................................... 8 List of Figures Figure 1: Product Vision 312 ........................................................................................................... 5 Figure 2: Front view ........................................................................................................................ 6 Figure 3: Top view .......................................................................................................................... 6 Figure 4: Bottom view ..................................................................................................................... 6 Figure 5: Right view ........................................................................................................................ 7 Figure 6: Left view ........................................................................................................................... 7 Figure 7: Rear view ......................................................................................................................... 8 List of Tables No table of figures entries found. 5 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Exterior Photographs Version: 1.0.0 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-004 TTControl GmbH Public Information. 1 Overview The purpose of this document is to provide the required data and information as required per FCC Title 47, Chapter I, Subchapter A, Part 2, Subpart J, §2.1033 – “Application for Certification” – Exterior Photographs for the product “Vision 312”, that shall be FCC certified. 2 Objective The device that shall be certified is identified as follows: Device Description: Vision 312 Hardware Identification: H-156-P-02-003 Serial Number: V3xxxxxxxxxxxx FCC-ID: 2AUIVTTCVISION312 Date of Manufactory: xx/20xx Device that the certification is applied for: Figure 1: Product Vision 312 3 47 CFR $ 2.1033 (b) 3.1 (7): Exterior Photographs The pictures are not delivered as A4 printouts as the provided pictures are sharp and clear enough for the product identification. 6 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Exterior Photographs Version: 1.0.0 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-004 TTControl GmbH Public Information. 3.1.1 Front View Figure 2: Front view 3.1.2 Top View Figure 3: Top view 3.1.3 Bottom View Figure 4: Bottom view 7 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Exterior Photographs Version: 1.0.0 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-004 TTControl GmbH Public Information. 3.1.4 Right View Figure 5: Right view 3.1.5 Left View Figure 6: Left view 8 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - App…

Text truncated - open the document above for the full version.

TTControl GmbH Schoenbrunner Str. 7, A-1040 Vienna, Austria, Tel. + 43 1 585 34 34-0, Fax +43 1 585 34 34-90, [email protected] No part of the document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the written permission of TTControl GmbH. Company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies. TTControl GmbH undertakes no further obligation in relation to this document. © 2020 TTControl GmbH. All rights reserved. Subject to change and corrections . Vision 312 Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Label and Location Info Reference: Vision 312 Security: Public Document number: D-156-TR-02-001 Version: 1.0.0 Date: 2020-03-10 Status: Released Review: Sindrak 3 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Label and Location Info Version: 1.0.0 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-001 TTControl GmbH Public Information. History of Changes Version Date Person Modification 0.0.1 2019 MVO Creation of TTControl template 1.0.0 2020-03-10 MVO Initial version 4 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Label and Location Info Version: 1.0.0 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-001 TTControl GmbH Public Information. Table of Contents 1 Overview ................................................................................................................................ 5 2 Objective ................................................................................................................................ 5 3 47 CFR $ 2.1033 (b) ............................................................................................................... 5 3.1 Label Design ................................................................................................................... 5 3.2 Label Location ................................................................................................................. 6 List of Figures Figure 1: Product Vision 312 ........................................................................................................... 5 Figure 2: Label Design .................................................................................................................... 6 Figure 3: Label Location.................................................................................................................. 6 List of Tables No table of figures entries found. 5 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Label and Location Info Version: 1.0.0 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-001 TTControl GmbH Public Information. 1 Overview The purpose of this document is to provide the required data and information as required per FCC Title 47, Chapter I, Subchapter A, Part 2, Subpart J, §2.1033 – “Application for Certification” – Label and Location Info for the product “Vision 312”, that shall be FCC certified. 2 Objective The device that shall be certified is identified as follows: Device Description: Vision 312 Hardware Identification: H-156-P-02-003 Serial Number: V3xxxxxxxxxxxx FCC-ID: 2AUIVTTCVISION312 Date of Manufactory: xx/20xx Device that the certification is applied for: Figure 1: Product Vision 312 3 47 CFR $ 2.1033 (b) 3.1 Label Design The following design artwork is used for the product label (not to scale): 6 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Label and Location Info Version: 1.0.0 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-001 TTControl GmbH Public Information. Figure 2: Label Design The size of the product label is 50.8 x 25.4 mm. 3.2 Label Location The product label is fitted on the back side of the device, see the following reference picture: Figure 3: Label Location 7 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Label and Location Info Version: 1.0.0 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-001 TTControl GmbH Public Information. Abbreviations and Acronyms Abbr. / Term Meaning FCC Federal Communications Commission Glossary Abbr. / Term Meaning 8 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Label and Location Info Version: 1.0.0 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-001 TTControl GmbH Public Information. References [1] FCC Title 47 – Part 2 J CFR § 2.1033, Application for certification [2] FCC Title 47 - Part 15 B, 47 CFR Ch. I (10–1–10 Edition), Unintentional Radiators

TTControl GmbH Schoenbrunner Str. 7, A-1040 Vienna, Austria, Tel. + 43 1 585 34 34-0, Fax +43 1 585 34 34-90, [email protected] No part of the document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the written permission of TTControl GmbH. Company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies. TTControl GmbH undertakes no further obligation in relation to this document. © 2020 TTControl GmbH. All rights reserved. Subject to change and corrections . Vision 312 Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Interior Photographs Reference: Vision 312 Security: Confidential Document number: D-156-TR-02-005 Version: 1.0.1 Date: 2020-03-10 Status: Released Review: Sindrak 3 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Interior Photographs Version: 1.0.1 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-005 TTControl GmbH Confidential and Proprietary Information. History of Changes Version Date Person Modification 0.0.1 2019 MVO Creation of TTControl template 1.0.0 2020-03-10 MVO Initial version 1.0.1 2020-03-10 MVO Added two pictures of the PCBs 4 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Interior Photographs Version: 1.0.1 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-005 TTControl GmbH Confidential and Proprietary Information. Table of Contents 1 Overview ................................................................................................................................ 5 2 Objective ................................................................................................................................ 5 3 47 CFR $ 2.1033 (b) ............................................................................................................... 5 3.1 (7): Interior Photographs .................................................................................................. 5 3.1.1 Top View Internal I ....................................................................................................... 6 3.1.2 Top View PBA Main ..................................................................................................... 7 3.1.3 Bottom View PBA Main ................................................................................................ 8 3.1.4 Top View Internal II ...................................................................................................... 9 3.1.5 Top View PBA Touch ................................................................................................... 9 3.1.6 Bottom View PBA Touch............................................................................................ 10 List of Figures Figure 1: Product Vision 312 ........................................................................................................... 5 Figure 2: Top view internal I ............................................................................................................ 6 Figure 3: Top view PBA Main .......................................................................................................... 7 Figure 4: Bottom view PBA Main ..................................................................................................... 8 Figure 5: Top view internal II ........................................................................................................... 9 Figure 6: Top view PBA Touch ........................................................................................................ 9 Figure 7: Bottom view PBA Touch ................................................................................................ 10 List of Tables No table of figures entries found. 5 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Interior Photographs Version: 1.0.1 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. Document number: D-156-TR-02-005 TTControl GmbH Confidential and Proprietary Information. 1 Overview The purpose of this document is to provide the required data and information as required per FCC Title 47, Chapter I, Subchapter A, Part 2, Subpart J, §2.1033 – “Application for Certification” – Interior Photographs for the product “Vision 312”, that shall be FCC certified. 2 Objective The device that shall be certified is identified as follows: Device Description: Vision 312 Hardware Identification: H-156-P-02-003 Serial Number: V3xxxxxxxxxxxx FCC-ID: 2AUIVTTCVISION312 Date of Manufactory: xx/20xx Device that the certification is applied for: Figure 1: Product Vision 312 3 47 CFR $ 2.1033 (b) 3.1 (7): Interior Photographs The pictures are not delivered as A4 printouts as the provided pictures are sharp and clear enough for the product identification. 6 Project Name: Vision 312 Document Title: Technical Report according to 47 CFR § 2.1033 - Application for certification (b) - Interior Photographs Version: 1.0.1 Page Last Change: 2020-03-10 © 2020 TTControl GmbH. All rights reserved. …

Text truncated - open the document above for the full version.