2AUKJ-POWERNommi-Power

TECHNICAL SPECIFICATIONS DIMENSIONS WEIGHT BATTERY CAPACITY BATTERY LIFE Qi WIRELESS CHARGER COMMUNICATION SYSTEM TD - LTE frequencies FDD LTE frequencies WCDMA frequencies GSM frequencies TD - LTE LTE FDD Wi-Fi PROTOCOL SIM CARD USB input USB output 85x115x17mm 137g (4,8 ounces) 5600 mAh 2 4 hours NO Support TD - LTE/LTE FDD/WCDMA/GSM B41 B2/B4/B5/B7 /B12/B17 B2/B5 850/1900Mhz Cat4, up to 112Mb/s DL and 17Mb/ s UL Cat4, up to 150Mb/s DL and 50Mb/s UL Support IE EE 802.11 b/g/n/ac (* ac for receiving only), repeater up to 150 Mb/s 1 Soft-SIM (Embedded) 1 Standard SIM slot ( Build-in) USB type-C, Maximum current 5V 1.65A USB output port (Power Bank) max current 5V 1.5A 85x126x26mm 235g (8,28 ounces) 1 0000 mAh 48 hours YES (Compatible with iPhone 8/X and most Android phones) Output 5V 1A Support TD - LTE/LTE FDD/WCDMA/GSM B41 B2/ B4/B5/B7 /B12/B17 B2/B5 850/1900Mhz Cat4, up to 112Mb/s DL and 17Mb/s UL Cat4, up to 150Mb/s DL and 50Mb/s UL Support I EEE 802.11 b/g/n/ac (* ac for receiving only), repeater up to 150 Mb/s 1 Soft-SIM (Embedded) 1 Standard SIM slot ( Build-in) USB type-C, Maximum current 5V 1.65A USB output port (Power Bank) max current 5V 1.5A FCCSTATEMENT: ThisdevicecomplieswithPart15oftheFCCRules.Operationissubject tothefollowingtwoconditions: (1)Thisdevicemaynotcauseharmfulinterference,and (2)Thisdevicemustacceptanyinterferencereceived,including interferencethatmaycauseundesiredoperation. Warning:Changesormodificationsnotexpresslyapprovedbytheparty responsibleforcompliancecouldvoidtheuser'sauthoritytooperatethe equipment. NOTE:Thisequipmenthasbeentestedandfoundtocomplywiththe limitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules. Theselimitsaredesignedtoprovidereasonableprotectionagainst harmfulinterferenceinaresidentialinstallation.Thisequipment generatesusesandcanradiateradiofrequencyenergyand,ifnot installedandusedinaccordancewiththeinstructions,maycauseharmful interferencetoradiocommunications.However,thereisnoguarantee thatinterferencewillnotoccurinaparticularinstallation.Ifthisequipment doescauseharmfulinterferencetoradioortelevisionreception,which canbedeterminedbyturningtheequipmentoffandon,theuseris encouragedtotrytocorrecttheinterferencebyoneormoreofthe followingmeasures: Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthatto whichthereceiverisconnected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. RFwarningstatement: ThedevicehasbeenevaluatedtomeetgeneralRFexposure requirement.Thedevicecanbeusedinportableexposurecondition withoutrestriction. SARInformationStatement Theproductisdesignedandmanufacturednottoexceedtheemissionlimitsforexposureto radiofrequency(RF)energysetbytheFederalCommunicationsCommissionoftheU.S. Government.Theselimitsarepartofcomprehensiveguidelinesandestablishpermittedlevelsof RFenergyforthegeneralpopulation.Theguidelinesarebasedonstandardsthatwere developedbyindependentscientificorganizationsthroughperiodicandthoroughevaluationof scientificstudies.Thestandardsincludeasubstantialsafetymargindesignedtoassurethesafety ofallpersons,regardlessofageandhealth.Theexposurestandardforwirelessmobilephones employsaunitofmeasurementknownastheSpecificAbsorptionRate,orSAR.TheSARlimitset bytheFCCis1.6W/kg.TestsforSARareconductedwiththeproducttransmittingatitshighest certifiedpowerlevelinalltestedfrequencybands.AlthoughtheSARisdeterminedatthehighest certifiedpowerlevel,theactualSARleveloftheproductwhileoperatingcanbewellbelowthe maximumvalue.Thisisbecausetheproductisdesignedtooperateatmultiplepowerlevelssoas touseonlythepowerrequiredtoreachthenetwork.Ingeneral,thecloseryouaretoawireless basestationantenna,thelowerthepoweroutput.Beforeaproductmodelisavailableforsaleto thepublic,itmustbetestedandcertifiedtotheFCCthatitdoesnotexceedthelimitestablished bythegovernmentadoptedrequirementforsafeexposure.Thetestsareperformedinpositionsand locations(e.g.,attheearandwornonthebody)asrequiredbytheFCCforeachmodel.Thehighest SARvalueforthismodelproductwhentestedforusewornonthebody,asdescribedinthisuser guide,whenproperlywornonthebodyis1.140W/kg. (Body-wornmeasurementsdifferamongphonemodels,dependinguponavailableaccessoriesand FCCrequirements).WhiletheremaybedifferencesbetweentheSARlevelsofvariousproductandat variouspositions,theyallmeetthegovernmentrequirementforsafeexposure.TheFCChasgranted anEquipmentAuthorizationforthismodelproductwithallreportedSARlevelsevaluatedasin compliancewiththeFCCRFexposureguidelines.SARinformationonthismodelproductisonfile withtheFCCandcanbefoundundertheDisplayGrantsectionofhttp://www.fcc.gov/oet/fccidafter searchingon. FCCID:2AUKJ-POWERAdditionalinformationonSpecificAbsorptionRates(SAR)canbefound ontheCellularTelecommunicationsIndustryAsso-ciation(CTIA)web-siteathttps://www.ctia.org/In theUnitedStatesandCanada,theSARlimitis1.6watts/kg(W/kg)averagedoveronegramoftissue. Thestandardincorporatesasub-stantialmarginofsafetytogiveadditionalprotectionforthepublic andtoaccountforanyvariationsinmeasurements. Body-wornOperation Thisdevicewastestedfortypicalbody-wornoperations.TocomplywithRFexposurerequirements, aminimumseparationdistanceof0mmisusedbetweentheuser’sbodyandthehandset,including theantenna.Third-partybelt-clips,holsters,andsimilaraccessoriesusedbythisdeviceshouldnot containanymetalliccomponents.Body-wornaccessoriesthatdonotmeettheserequirementsmay notcomplywithRFexposurerequirementsandshouldbeavoided.Useonlythesuppliedoran approvedantenna.

Powerwifi, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2019/11/19 Subject; Request for Confidentiality FCC ID: 2AUKJ-POWER To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name:Tamara Datsko Title: COO

Powerwifi, Inc. Letter of Authorization Company: Powerwifi, Inc. Address: Delaware, 2035 Sunset Lake road, Suite B-2, City of Newark, Zip Code 19702, county New Castle, USA Product Name: Nommi-Power Model Number(s): Power Product Description: Nommi-Power We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 26/12/2019 Name:Tamara Datsko Title:COO Company: Powerwifi, Inc.

ModelNumber:2AUKJ-POWER

Label Location:

Product Name: Nommi-Power Model No.: Power FCC ID: 2AUKJ-POWER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

ModelNumber:2AUKJ‐POWER Inductive loop coilAntenna WiFi Antenna B 2G\3G\4G AntennaWiFi Antenna A 4Gsecondary antenna

Report No.: SZAWW190909003-04FCC ID: 2AUKJ-POWERPage 1 of 13 Code:AB-RF-05-a FCC TEST REPORT Client Name: Powerwifi, Inc. Address: Delaware, 2035 Sunset Lake road, Suite B-2, City of Newark, Zip Code 19702, county New Castle, USA Product Name: Nommi-Power Date: Dec. 25, 2019 Shenzhen Anbotek Compliance Laboratory Limited Report No.: SZAWW190909003-04FCC ID: 2AUKJ-POWERPage 2 of 13 Code:AB-RF-05-a Contents 1. General Information ............................................................................................................................................... 4 1.1. Client Information ....................................................................................................................................... 4 1.2. Description of Device (EUT) ..................................................................................................................... 4 1.3. Auxiliary Equipment Used During Test ................................................................................................... 4 1.4. Test Equipment List .................................................................................................................................... 4 1.5. Description of Test Facility ........................................................................................................................ 5 2. Measurement and Result ..................................................................................................................................... 6 2.1. Requirements .............................................................................................................................................. 6 2.2. Test Setup .................................................................................................................................................... 7 2.3. Test Procedure ............................................................................................................................................ 7 2.4. Test Result ................................................................................................................................................... 7 2.4.1. Equipment Approval Considerations item 5.b of KDB 680106 D01 v03. ...................................... 7 2.4.2. Environmental evaluation and exposure limit according to FCC CFR 47 part 1, 1.1307(b), 1.1310 .................................................................................................................................................................. 9 APPENDIX I -- TEST SETUP PHOTOGRAPH ................................................................................................... 11 Report No.: SZAWW190909003-04FCC ID: 2AUKJ-POWERPage 3 of 13 Code:AB-RF-05-a TEST REPORT Applicant: Powerwifi, Inc. Manufacturer: Powerwifi, Inc. Product Name: Nommi-Power Model No.: Power Trade Mark: N/A Rating(s): Input: DC 5V, 1.5A(With DC 3.8V, 10000mAh Battery inside) Test Standard(s) : FCC Part 1.1310, 1.1307(b) Test Method(s): KDB680106 D01 RF Exposure Wireless Charging Apps v03 The device described above is tested by Shenzhen Anbotek Compliance Laboratory Limited to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Shenzhen Anbotek Compliance Laboratory Limited is assumed full of responsibility for the accuracy and completeness of these measurements. Also,this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC Part 1.1307 & KDB680106 D01 requirements. This report applies to above tested sample only and shall not be reproduced in part without written approval of Shenzhen Anbotek Compliance Laboratory Limited. Date of Receipt: Sept. 09, 2019 Date of TestSept. 09~ Oct. 28, 2019 Prepared By (Engineer / Dolly Mo) Reviewer (Supervisor / Bibo Zhang) Approved & Authorized Signer (Manager / Sally Zhang) Report No.: SZAWW190909003-04FCC ID: 2AUKJ-POWERPage 4 of 13 Code:AB-RF-05-a 1. General Information 1.1. Client Information 1.2. Description of Device (EUT) Product Name : Nommi-Power Model No.: Power Trade Mark: N/A Test Power Supply: AC 120V, 60Hz/ DC 3.8V Battery inside Test Sample No.: 1-2-1(Normal Sample), 1-2-2(Engineering Sample) Product Description : Operation Frequency:110.1~205KHz Modulation Type:MSK Antenna Type:Inductive loop coil Antenna Antenna Gain(Peak):0 dBi Remark:1) For a more detailed features description, please refer to the manufacturer’s specifications or the User’s Manual. 1.3. Auxiliary Equipment Used During Test Adapter: Manufacturer: Shenzhen Jihongda Power Co., Ltd. M/N: JHD-AP013U-050200BB-B Input: 100-240V~ 50/60Hz, 0.35A Output: DC 5V, 2000mA 1.4. Test Equipment List Applicant: Powerwifi, Inc. Address: Delaware, 2035 Sunset Lake road, Suite B-2, City of Newark, Zip Code 19702, county New Castle, USA Manufacturer: Powerwifi, Inc. Address : Delaware, 2035 Sunset Lake road, Suite B-2, City of Newark, Zip Code 19702, county New Castle, USA Factory: Shenzhen Sanwokoy Technology Co., Ltd. Address : Room 310, 3th Floor East, Building 1, Xintianxia Industrial City, No. 2 Beier R oad, Bantian, Longgang District, Shenzhen, China. Report No.: SZAWW190909003-04FCC ID: 2AUKJ-POWERPage 5 of 13 Code:AB-RF-05-a ItemEquipmentManufacturerModel No.Serial No.Last Cal.Cal. Interval 1 Magnetic field meter NARDAELT-400423623 Dec. 24, 2018 1 Year 2E-Field ProbeNardaEF0391Q15221 Nov.17, 2017 3 Year 3H-Field ProbeNardaHF3061Q15835 Nov.17, 2017 3 Year 1.5. Description of Test Facility The test facility is recognized, certified, oraccredited by the following organizations: FCC-Registration No.: 184111 Shenzhen Anbotek Compliance Laboratory Limited, EMC Laboratory has been registed and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration No. 184111, Sept…

Text truncated - open the document above for the full version.

Report No.: SZAWW190909003-03FCC ID: 2AUKJ-POWERPage 1 of 22 Code:AB-RF-05-a FCC TEST REPORT Client Name: Powerwifi, Inc. Address: Delaware, 2035 Sunset Lake road, Suite B-2, City of Newark, Zip Code 19702, county New Castle, USA Product Name: Nommi-Power Date: Dec. 25, 2019 Shenzhen Anbotek Compliance Laboratory Limited Report No.: SZAWW190909003-03FCC ID: 2AUKJ-POWERPage 2 of 22 Code:AB-RF-05-a Contents 1. General Information ............................................................................................................................................... 4 1.1. Client Information ....................................................................................................................................... 4 1.2. Description of Device (EUT) ..................................................................................................................... 4 1.3. Auxiliary Equipment Used During Test ................................................................................................... 5 1.4. Description of Test Modes ........................................................................................................................ 5 1.5. Description Of Test Setup ......................................................................................................................... 6 1.6. Test Equipment List .................................................................................................................................... 7 1.7. Description of Test Facility ........................................................................................................................ 8 2. Summary of Test Results ..................................................................................................................................... 9 3. Conducted Emission Test ................................................................................................................................... 10 3.1. Test Standard and Limit .......................................................................................................................... 10 3.2. Test Setup .................................................................................................................................................. 10 3.3. Test Procedure .......................................................................................................................................... 10 3.4. Test Data .................................................................................................................................................... 10 4. Radiation Spurious Emission and Band Edge ................................................................................................ 13 4.1. Test Standard and Limit .......................................................................................................................... 13 4.2. Test Setup .................................................................................................................................................. 13 4.3. Test Procedure .......................................................................................................................................... 14 4.4. Test Data .................................................................................................................................................... 15 5. Antenna Requirement ......................................................................................................................................... 19 5.1. Test Standard and Requirement ............................................................................................................ 19 5.2. Antenna Connected Construction .......................................................................................................... 19 APPENDIX I -- TEST SETUP PHOTOGRAPH ................................................................................................... 20 APPENDIX II -- PHOTOGRAPH ........................................................................................................................... 22 Report No.: SZAWW190909003-03FCC ID: 2AUKJ-POWERPage 3 of 22 Code:AB-RF-05-a TEST REPORT Applicant: Powerwifi, Inc. Manufacturer: Powerwifi, Inc. Product Name: Nommi-Power Model No.: Power Trade Mark: N/A Rating(s): Input: DC 5V, 1.5A(With DC 3.8V, 10000mAh Battery inside) Test Standard(s) : FCC Part15 Subpart C, Paragraph 15.209 Test Method(s): ANSI C63.10: 2013 The device described above is tested by Shenzhen Anbotek Compliance Laboratory Limited to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Shenzhen Anbotek Compliance Laboratory Limited is assumed full of responsibility for the accuracy and completeness of these measurements. Also,this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC Part 15 Subpart C requirements. This report applies to above tested sample only and shall not be reproduced in part without written approval of Shenzhen Anbotek Compliance Laboratory Limited. Date of Receipt Sept. 09, 2019 Date of TestSept. 09~ Oct. 28, 2019 Prepared By (Engineer / Dolly Mo) Reviewer (Supervisor / Bibo Zhang) Approved & Authorized Signer (Manager / Sally Zhang) Report No.: SZAWW190909003-03FCC ID: 2AUKJ-POWERPage 4 of 22 Code:AB-RF-05-a 1. General Information 1.1. Client Information Applicant: Powerwifi, Inc. Address: Delaware, 2035 Sunset Lake road, Suite B-2, City of Newark, Zip Code 19702, county New Castle, USA Manufacturer: Powerwifi, Inc. Address : Delaware, 2035 Sunset Lake road, Suite B-2, City of Newark, Zip Code 19702, county New Castle, USA Factory: Shenzhen Sanwokoy Technology Co., Ltd. Address : Room 310, 3th Floor East, Building 1, Xintianxia Industrial City, No. 2 Beier R oad, B…

Text truncated - open the document above for the full version.

PHOTOSOFTESTSETUP ModelNumber:Power Photo of Conducted Emission Measurement Photo of Radiation Emission Test Photo of Radiation Emission Test Photo of Conducted Emission Measurement Photo of Radiation Emission Test Photo of MPE Measurement