Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 1 | 24E | 1.86 GHz - 1.90 GHz | 82.00 mW | 18M1G7D | 0.0177ppm |
| 2 | 24E | 1.86 GHz - 1.90 GHz | 71.80 mW | 5M56W7D | 0.0254ppm |
| 3 | 24E | 1.85 GHz - 1.91 GHz | 94.00 mW | 1M11G7D | 0.0023ppm |
| 4 | 24E | 1.85 GHz - 1.91 GHz | 76.90 mW | 1M12W7D | 0.0018ppm |
| 5 | 27 | 1.72 GHz - 1.75 GHz | 64.60 mW | 18M0G7D | 0.0192ppm |
| 6 | 27 | 1.72 GHz - 1.75 GHz | 55.10 mW | 5M54W7D | 0.002ppm |
| 7 | 27 | 704 MHz - 711 MHz | 37.50 mW | 9M05G7D | 0.0025ppm |
| 8 | 27 | 704 MHz - 711 MHz | 32.40 mW | 5M08W7D | 0.0046ppm |
| 9 | 27 | 700.5 MHz - 714.5 MHz | 47.80 mW | 2M75G7D | 0.0026ppm |
| 1 | 27 | 700.5 MHz - 714.5 MHz | 36.50 mW | 2M74W7D | 0.0034ppm |
| 11 | 27 | 1.71 GHz - 1.75 GHz | 49.50 mW | 4M15F9W | 0.011ppm |
Grant NotesPower output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz.
It supports WCDMA B4 and LTE (QPSK, 16QAM) B2, B4 and B12.
Channel Bandwidth (1.4/3/5/10 MHz) for LTE B12.
Channel Bandwidth (1.4/3/5/10/15/20 MHz) for LTE B2 and B4.
The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures.
End-users must be informed of the Head (Next-to-mouth 10mm) and Limb Worn (Wrist-worn 0mm) operating requirements for satisfying RF exposure compliance.
The highest reported standalone 1g SAR for Next-to-mouth (separation 10 mm) exposure condition is 1.24 W/kg.
The highest reported simultaneous SAR for Next-to-mouth (separation 10 mm) exposure condition is 1.33 W/kg.
The highest reported standalone 10g SAR for Wrist-worn (separation 0 mm) exposure condition is 1.84 W/kg.
The highest reported simultaneous SAR for Wrist-worn (separation 0 mm) exposure condition is 1.89 W/kg.