2AUOUC65RSmartphone

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S04 Page 251 of 379 ANSI/TIA 5050-2018 \ 2N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\5GNR n48 ANSI/TIA 5050-2018 \ 2N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\5GNR n66 ANSI/TIA 5050-2018 \ 2N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\5GNR n71 ANSI/TIA 5050-2018 \ 2N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\5GNR n77 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S04 Page 252 of 379 5.2Receive path - distortion and noise 500Hz 8N&2N NB ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\WCDMA Band II ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\WCDMA Band IV ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\WCDMA Band V ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\LTE Band 7 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S04 Page 253 of 379 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\LTE Band 12 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\LTE Band 13 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\LTE Band 14 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\LTE Band 25 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S04 Page 254 of 379 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\ LTE Band 26 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\LTE Band 30 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\LTE Band 41 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\LTE Band 48 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S04 Page 255 of 379 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\LTE Band 66 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\LTE Band 71 ANSI/TIA 5050-2018 \ 2N HAC OFF \ WB 23.85kbps\ 5.2 Receive path – distortion and noise\5GNR n7 ANSI/TIA 5050-2018 \ 2N HAC OFF \ WB 23.85kbps\ 5.2 Receive path – distortion and noise\5GNR n25 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S04 Page 256 of 379 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\5GNR n26 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\5GNR n30 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\5GNR n41 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\5GNR n48 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S04 Page 257 of 379 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\5GNR n66 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\5GNR n71 ANSI/TIA 5050-2018 \ 8N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\5GNR n77 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S04 Page 258 of 379 ANSI/TIA 5050-2018 \ 2N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\WCDMA Band II ANSI/TIA 5050-2018 \ 2N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\WCDMA Band IV ANSI/TIA 5050-2018 \ 2N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\WCDMA Band V ANSI/TIA 5050-2018 \ 2N HAC OFF \ NB 12.2kbps\ 5.2 Receive path – distortion and noise\LTE Band 7 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S04 Page 259 of 379 ANSI/TIA 5050-2018 \ 2N HA…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S01 Annex F DASY Calibration Certificate

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S01 Annex E Conducted Power Note: Conducted power unit: dBm The target power was recorded in the manufacturer's document. Full Power 926294009538131214131513413241824233 966298009938153716381738435744074458 1852.418801907.61712.41732.61752.6826.4836.4846.6 3GPP Rel 99RMC 12.2Kbps24.2524.3724.2825.0024.1524.1824.0725.0024.0224.1324.1125.00 3GPP Rel 5HSDPA Subtest-123.3823.6623.6824.5023.3223.3623.3324.0023.4023.5123.4424.50 3GPP Rel 5HSDPA Subtest-223.4223.7723.7324.5023.3623.4223.3424.0023.3223.5423.3124.50 3GPP Rel 5HSDPA Subtest-323.0323.2123.2024.0022.8922.9422.8623.5022.8723.0622.9624.00 3GPP Rel 5HSDPA Subtest-423.0423.1723.2124.0022.9222.9622.8823.5022.8823.0823.0724.00 3GPP Rel 8DC-HSDPA Subtest-123.4523.4123.4624.5023.1223.2523.1324.0023.4923.5623.4624.50 3GPP Rel 8DC-HSDPA Subtest-223.3323.5223.4824.5023.2023.2423.1224.0023.4423.5523.4224.50 3GPP Rel 8DC-HSDPA Subtest-322.7822.9322.9924.0022.6122.7222.7123.5023.0122.9522.9224.00 3GPP Rel 8DC-HSDPA Subtest-422.7622.8922.9524.0022.6722.7122.5023.5022.9723.0122.9124.00 3GPP Rel 6HSUPA Subtest-123.2223.3623.3724.5023.2323.3523.2624.0023.4223.5323.4124.50 3GPP Rel 6HSUPA Subtest-222.9022.8922.9724.0022.6822.9122.7524.0022.9323.0222.9424.50 3GPP Rel 6HSUPA Subtest-323.3023.4523.4623.5023.1923.4223.2124.0023.4023.5323.4924.50 3GPP Rel 6HSUPA Subtest-423.2623.2923.4424.5023.2323.2223.2024.0023.4323.4323.4124.50 3GPP Rel 6HSUPA Subtest-523.2923.3523.4824.5023.1623.3923.3024.0023.4023.5323.3824.50 3GPP Rel 7 HSPA+ (16QAM) Subtest-123.4523.6023.5224.5023.3723.3523.2424.0023.3423.5223.4424.50 Cable Loss0.8Cable Loss0.8Cable Loss0.6 Max.24.37Max.24.18Max.24.13 Mode Date2026.1.62026.1.62026.1.6 Attenuator Tune-up Limit (dBm) Tune-up Limit (dBm) Tune-up Limit (dBm) BandWCDMA Band II (dBm)WCDMA Band IV (dBm)WCDMA Band V (dBm) TX Channel Rx Channel Frequency (MHz) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S01 BW [MHz]Modulation RB Size RB Offset Low Channel Middle Channel High Channel BW [MHz] Modulation RB Size RB Offset Low Channel Middle Channel High Channel 187001890019100200502017520300 18601880190017201732.51745 20QPSK1023.6123.7123.5520QPSK1023.5523.6123.58 20QPSK14923.5923.6323.5620QPSK14923.2923.3023.40 20QPSK19923.5323.6023.5720QPSK19923.2123.2323.35 20QPSK50022.8022.8222.7620QPSK50022.7922.8322.81 20QPSK502422.7522.6922.6720QPSK502422.7322.7622.71 20QPSK505022.7222.7522.6820QPSK505022.7022.7322.69 20QPSK100022.7522.7622.6520QPSK100022.6722.7622.66 2016QAM1022.7822.6922.522016QAM1022.4022.6522.60 2016QAM14922.6622.7522.702016QAM14922.6522.7122.65 2016QAM19922.7622.5322.802016QAM19922.7222.7122.63 2016QAM50021.2621.2121.252016QAM50021.7621.7221.86 2016QAM502421.4721.3221.312016QAM502421.7921.6821.81 2016QAM505021.3421.3721.392016QAM505021.8421.7021.80 2016QAM100021.3221.3421.302016QAM100021.7621.7521.82 2064QAM1021.4221.5621.512064QAM1021.8821.8221.95 2064QAM14921.4521.7121.392064QAM14921.6821.7021.95 2064QAM19921.5521.4321.392064QAM19921.7821.7921.99 2064QAM50021.0120.9020.902064QAM50020.9220.8920.99 2064QAM502420.8420.8520.922064QAM502420.9120.9321.15 2064QAM505020.9720.9020.952064QAM505020.9520.9221.19 2064QAM100020.8920.9220.912064QAM100020.9320.9021.10 18675 1890019125200252017520325 1857.518801902.51717.51732.5 1747.5 15QPSK1023.5723.6723.5115QPSK1023.5123.5723.54 15QPSK13723.5523.5923.5215QPSK13723.2523.2623.36 15QPSK17423.4923.5623.5315QPSK17423.1723.1923.31 15QPSK36022.7622.7822.7215QPSK36022.7322.7622.77 15QPSK362022.7122.6522.6315QPSK362022.6922.7222.80 15QPSK363922.6822.7122.6415QPSK363922.6622.6922.84 15QPSK75022.7122.7222.6115QPSK75022.6322.7222.76 1516QAM1022.7422.6522.481516QAM1022.3622.6122.56 1516QAM13722.6222.7122.661516QAM13722.6122.6722.61 1516QAM17422.7222.4922.761516QAM17422.6822.6722.59 1516QAM36021.2221.1721.211516QAM36021.7221.6821.82 1516QAM362021.4321.2821.271516QAM362021.7521.6421.77 1516QAM363921.3021.3321.351516QAM363921.8021.6621.76 1516QAM75021.2821.3021.261516QAM75021.7221.7121.78 1564QAM1021.3821.5221.471564QAM1021.8421.7821.91 1564QAM13721.4121.6721.351564QAM13721.6421.6621.91 1564QAM17421.5121.3921.351564QAM17421.7421.7521.95 1564QAM36020.9720.8620.861564QAM36020.8820.8520.95 1564QAM362020.8020.8120.881564QAM362020.8720.8921.11 1564QAM363920.9320.8620.911564QAM363920.9120.8821.15 1564QAM75020.8520.8820.871564QAM75020.8920.8621.06 186501890019150200002017520350 18551880190517151732.51750 10QPSK1023.5423.6423.48 10QPSK1023.4523.5123.48 10 QPSK12523.5223.5623.4910QPSK12523.1923.2023.30 10QPSK14923.4623.5323.5010 QPSK14923.1123.1323.25 10QPSK25022.7322.7522.6910QPSK25022.6722.7022.71 10QPSK251222.6822.6222.6010QPSK251222.6322.6622.74 10QPSK252522.6522.6822.6110QPSK252522.6022.6322.78 10QPSK50022.6822.6922.5810QPSK50022.5722.6622.70 1016QAM1022.7122.6222.451016QAM1022.3022.5522.50 1016QAM12522.5922.6822.631016QAM12522.5522.6122.55 1016QAM14922.6922.4622.731016QAM14922.6222.6122.53 1016QAM25021.1921.1421.181016QAM25021.6621.6221.76 1016QAM251221.4021.2521.241016QAM251221.6921.5821.71 1016QAM252521.2721.3021.321016QAM252521.7421.6021.70 1016QAM50021.2521.2721.231016QAM50021.6621.6521.72 1064QAM1021.3521.4921.441064QAM1021.7821.7221.85 1064QAM12521.3821.6421.321064QAM12521.5821.6021.85 1064QAM14921.4821.3621.321064QAM14921.6821.6921.89 1064QAM25020.9420.8320.831064QAM25020.8220.7920.89 1064QAM251220.7720.7820.851064QAM251220.8120.8321.05 1064QAM252520.9020.8320.881064QAM252520.8520.8221.09 1064QAM50020.8220.8520.841064QAM50020.8320.8021.00 1862518900191751997520…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S01 Annex D Plots of Maximum SAR Test Results Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2026/5/7 WCDMA Band II_RMC 12.2Kbps_Right Cheek_Ch9262_Ant4 Communication System: UID 0, UMTS-FDD (0); Frequency: 1852.4 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1852.4 MHz; σ = 1.442 S/m; ε r = 40.135; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.96, 7.96, 7.96) @ 1852.4 MHz; Calibrated: 2026/1/7 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2026/1/7 - Phantom: SAM 1; Type: QD000P40CD; Serial: 1811 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch9262/Area Scan (81x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.49 W/kg Ch9262/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.65 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 1.61 W/kg SAR(1 g) = 0.923 W/kg; SAR(10 g) = 0.515 W/kg Smallest distance from peaks to all points 3 dB below = 10.8 mm Ratio of SAR at M2 to SAR at M1 = 63.2% Maximum value of SAR (measured) = 1.18 W/kg 0 dB = 1.18 W/kg = 0.72 dBW/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2026/5/7 WCDMA Band IV_RMC 12.2Kbps_Right Cheek_Ch1413_Ant4 Communication System: UID 0, UMTS-FDD (0); Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1733 MHz; σ = 1.323 S/m; ε r = 40.599; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.96, 7.96, 7.96) @ 1732.6 MHz; Calibrated: 2026/1/7 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2026/1/7 - Phantom: SAM 1; Type: QD000P40CD; Serial: 1811 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch1413/Area Scan (81x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.38 W/kg Ch1413/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.92 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 1.53 W/kg SAR(1 g) = 0.865 W/kg; SAR(10 g) = 0.478 W/kg Smallest distance from peaks to all points 3 dB below = 11.3 mm Ratio of SAR at M2 to SAR at M1 = 63% Maximum value of SAR (measured) = 1.09 W/kg 0 dB = 1.09 W/kg = 0.37 dBW/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2026/5/4 WCDMA Band V_RMC 12.2Kbps_Right Cheek_Ch4182_Ant1 Communication System: UID 0, UMTS-FDD (0); Frequency: 836.4 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 836.4 MHz; σ = 0.944 S/m; ε r = 41.336; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(9.01, 9.01, 9.01) @ 836.4 MHz; Calibrated: 2026/1/7 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2026/1/7 - Phantom: SAM 1; Type: QD000P40CD; Serial: 1811 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch4182/Area Scan (81x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.713 W/kg Ch4182/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.119 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.895 W/kg SAR(1 g) = 0.563 W/kg; SAR(10 g) = 0.358 W/kg Smallest distance from peaks to all points 3 dB below = 15.1 mm Ratio of SAR at M2 to SAR at M1 = 64% Maximum value of SAR (measured) = 0.741 W/kg 0 dB = 0.741 W/kg = -1.30 dBW/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2026/5/7 LTE Band 2_20MHz_QPSK_1RB_0Offset_Left Cheek_Ch18900_Ant3 Communication System: UID 0, LTE (0); Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1880 MHz; σ = 1.267 S/m; ε r = 40.567; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.96, 7.96, 7.96) @ 1880 MHz; Calibrated: 2026/1/7 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2026/1/7 - Phantom: SAM 1; Type: QD000P40CD; Serial: 1811 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch18900/Area Scan (81x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.236 W/kg Ch18900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.642 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.264 W/kg SAR(1 g) = 0.172 W/kg; SAR(10 g) = 0.107 W/kg Smallest distance from peaks to all points 3 dB below = 12.9 mm Ratio of SAR…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S01 Annex C Plots of System Performance Check Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2026/5/1 System Check_750MHz Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 750 MHz; σ = 0.901 S/m; ε r = 41.325; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(9.43, 9.43, 9.43) @ 750 MHz; Calibrated: 2026/1/7 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2026/1/7 - Phantom: SAM 1; Type: QD000P40CD; Serial: 1811 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) CW750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.15 W/kg CW750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 43.36 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 3.86 W/kg SAR(1 g) = 2.17 W/kg; SAR(10 g) = 1.41 W/kg Smallest distance from peaks to all points 3 dB below = 22.6 mm Ratio of SAR at M2 to SAR at M1 = 65.9% Maximum value of SAR (measured) = 2.06 W/kg 0 dB = 2.06 W/kg = 3.05 dBW/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2026/5/2 System Check_750MHz Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 750 MHz; σ = 0.911 S/m; ε r = 41.282; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(9.43, 9.43, 9.43) @ 750 MHz; Calibrated: 2026/1/7 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2026/1/7 - Phantom: SAM 1; Type: QD000P40CD; Serial: 1811 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) CW750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.12 W/kg CW750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 42.85 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 2.96 W/kg SAR(1 g) = 2.13 W/kg; SAR(10 g) = 1.39 W/kg Smallest distance from peaks to all points 3 dB below = 22.6 mm Ratio of SAR at M2 to SAR at M1 = 65.9% Maximum value of SAR (measured) = 2.13 W/kg 0 dB = 2.13 W/kg = 3.06 dBW/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2026/5/3 System Check_750MHz Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 750 MHz; σ = 0.894 S/m; ε r = 41.236; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: ES3DV3 - SN3295; ConvF(6.54, 6.54, 6.54) @ 750 MHz; Calibrated: 2025/8/15 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1324; Calibrated: 2025/8/15 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) CW750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.52 W/kg CW750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 38.67 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 1.61 W/kg SAR(1 g) = 1.98 W/kg; SAR(10 g) = 1.35 W/kg Smallest distance from peaks to all points 3 dB below = 16.3 mm Ratio of SAR at M2 to SAR at M1 = 78.1% Maximum value of SAR (measured) = 1.51 W/kg 0 dB = 1.51 W/kg = 1.79 dBW/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2026/5/4 System Check_900MHz Communication System: UID 0, CW (0); Frequency: 900 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 900 MHz; σ = 0.967 S/m; ε r = 40.846; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(9.01, 9.01, 9.01) @ 900 MHz; Calibrated: 2026/1/7 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2026/1/7 - Phantom: SAM 1; Type: QD000P40CD; Serial: 1811 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) CW900/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 4.09 W/kg CW900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 55.14 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 4.58 W/kg SAR(1 g) = 2.63 W/kg; SAR(10 g) = 1.67 W/kg Smallest distance from peaks to all points 3 dB below = 16 mm Ratio of SAR at M2 to SAR at M1 = 65.1% Maximum value of SAR (measured) = 4.47 W/kg 0 dB = 4.47 W/kg = 6.29 dBW/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Sc…

Text truncated - open the document above for the full version.

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S03 Page 1 of 33 Hearing Aid Compatibility (HAC) T-Coil Test Report APPLICANT : Rhino Mobility LLC PRODUCT NAME : Smartphone MODEL NAME : C65R BRAND NAME : RHINO FCC ID : 2AUOUC65R STANDARD(S) : FCC 47 CFR Part 20 (20.19) ANSI C63.19-2019 RECEIPT DATE : 2026-04-13 TEST DATE : 2026-05-07 to 2026-05-09 ISSUE DATE : 2026-06-18 Edited by: Pang Siyu (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S03 Page 2 of 33 DIRECTORY 1. Statement of T-Coil Measurement ···················································································· 4 2. Technical Information ········································································································ 5 2.1. Applicant and Manufacturer Information ····································································· 5 2.2. Equipment under Test (EUT) Description····································································· 5 2.3. Photographs of the EUT ································································································· 7 2.4. Applied Reference Documents ······················································································ 7 3. Air Interface and Operating Mode ···················································································· 8 4. T-Coil Test Requirements and Restrictions ·································································· 10 4.1. T-Coil Coupling Qualifying Field Strengths ······························································· 10 4.2. Desired ABM signal and Undesired ABM Field Qualification Requirements ········ 10 4.3. Frequency Response ···································································································· 11 5. HAC (T-Coil) Measurement System ················································································ 12 5.1. T-Coil Measurement Setup ··························································································· 12 5.2. Base Station Gain Factor ······························································································ 13 5.3. T-Coil Measurement Reference Plane ········································································· 14 5.4. System Validation ·········································································································· 15 6. T-Coil Test Procedure······································································································· 16 6.1. General Description ······································································································ 16 6.2. T-Coil Test Flow ·············································································································· 18 7. Test Equipment List ········································································································· 20 8. Test Results for CMRS Voice ·························································································· 21 8.1. Test Guidance ················································································································ 21 8.2. Test Results ···················································································································· 22 9. Test Results for OTT VoIP Application ·········································································· 26 9.1. T-Coil Measurement Setup for OTT VoIP ···································································· 26 9.2. Test Guidance ················································································································ 27 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25100429S03 Page 3 of 33 9.3. VoIP Test Results ··········································································································· 28 10. Uncertainty Assessment ································································································· 30 Annex A General Information ································································································ 31 Annex B Test Setup Photos ·································································································· 32 Annex C Plots of T-Coil Test Results ··················································································· 32 Annex D DASY Calibration Certificate ···········································…

Text truncated - open the document above for the full version.