2AUQF-EKOPOS SYSTEM

AURES TECHNOLOGIES S.A. Attestation Statement Letter I Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024.07.08 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC Application for FCC ID: 2AUQF-EKO AURES TECHNOLOGIES S.A. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited for receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Applicant’s Signature: Applicant’s Name: Christophe GUNTZ

AURES TECHNOLOGIES S.A. Attestation Statement Letter II Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024.07.08 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC Application for FCC ID: 2AUQF-EKO AURES TECHNOLOGIES S.A. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Applicant’s Signature: Applicant’s Name: Christophe GUNTZ

AURES TECHNOLOGIES S.A. 24 bis rue Léonard de Vinci, 91090 Lisses FRANCE Date: 2024.07.08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AUQF-EKO US Agent – Attestation Statement / Part 2.911(d)(7) AURES TECHNOLOGIES S.A. certifies, that as of 2024.07.08, we have designated PBUS TECH INC to accept service of process on our behalf for FCC ID: 2AUQF-EKO AURES TECHNOLOGIES S.A. accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. PBUS TECH INC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of AURES TECHNOLOGIES S.A. for FCC ID: 2AUQF-EKO. Designated Agent Information: Company Name: PBUS TECH INC FRN: 0033641440 Address: 75 Fairchild Ave. Plainview, NY 11803 Contact Person: YONG WOOK CHOI Phone: 631-714-2868 Email: [email protected] Sincerely, Company: AURES TECHNOLOGIES S.A. Designated Agent: PBUS TECH INC Company Representative: Christophe GUNTZ Designated Agent YONG WOOK CHOI Signature: Signature:

Date: 04/17/2018 VCB_F-01: Operating Procedures Form – FCC Authorization v02 Page 1 of 1 AURES TECHNOLOGIES S.A. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024.07.08 SUBJECT: FCC Application for (FCC ID: 2AUQF-EKO) To Whom It May Concern: We, the undersigned, hereby authorize Eun-Hye, Kwak in ICR Co., Ltd on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by ICR Co., Ltd on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, (Must be signed by the person that is listed on the FCC Website) Client’s signature: Client’s name & title: Christophe GUNTZ / Technical Manager Contact information / address: AURES TECHNOLOGIES S.A. /24 bis rue Léonard de Vinci, 91090 Lisses FRANCE

Date: 04/17/2018 VCB_F-01: Operating Procedures Form – FCC Confidentiality v03 Page 1 of 1 AURES TECHNOLOGIES S.A. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AUQF-EKO Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Type of Confidentiality Requested Exhibit Type ☐Short Term ☒Permanent Block Diagrams ☒Short Term External Photos ☒Short Term ☐Permanent* Internal Photos ☐Short Term ☒Permanent Operation Description ☐Short Term ☒Permanent Parts List/BOM ☐Short Term ☒Permanent Schematics ☒Short Term Test Setup Photos ☒Short Term ☐Permanent* User manual *Requires further justification before permanent confidentiality will be allowed. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of 180(ie- “45”, “90” or “180”) days. Sincerely, Client’s signature: Client’s name & title: Christophe GUNTZ / Technical Manager Contact information / address: AURES TECHNOLOGIES S.A. /24 bis rue Léonard de Vinci, 91090 Lisses FRANCE

page : (2) / Total (9) 2. Equipment under Test(EUT) Information Contents 5 6 7 3. Test Summary 4. Result 1. Applicant & Manufacturer & Test Laboratory Information 4 ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241968-0A page : (3) / Total (9) ICRT-TR-E241968-0A2024. 07. 22 Revision History Issued Report No.Issued DateRevisionsEffect Section Initial IssueAll ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241968-0A page : (4) / Total (9) Uncertainty for ICRLimit Laboratory 1. Applicant & Manufacturer & Test Laboratory Information 1.4 Measurement Uncertainty 1.3 Test Laboratory Information ±6 ㏈ 0.58% 1.1 Applicant information 1.2 Manufacturer Information 0.19%±5 % ±5 % All emissions, radiated (Under the 1 ㎓)3.22 ㏈ Parameter Applicant 0.90 ㏈±1.5 ㏈ 1.51 ㏈±3 ㏈ 1.36 ㏈±3 ㏈ 0.02%±3 % 3.67 ㏈±6 ㏈ Supply voltages Time All emissions, radiated (Above the 1 ㎓) Address Address Telephone No. Fax No. KOLAS No. KC & FCC ICR Co., Ltd. 112, Hwanggeum 3-ro 7beon-gil, Hagun-ri, Yangchon-eup, Gimpo-si, Gyeonggi-do, Korea +82-2-6351-9002 +82-2-6351-9007 KT652 KR0165 Occupied Channel Bandwidth RF output power, conducted Power Spectral Density, conducted Unwanted Emissions, conducted AURES TECHNOLOGIES S.A. 24 bis rue Léonard de Vinci, 91090 Lisses FRANCE AURES TECHNOLOGIES S.A. 24 bis rue Léonard de Vinci, 91090 Lisses FRANCE Applicant Address Contact PersonChristophe GUNTZ Telephone No.- Fax No.- E-mail [email protected] ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241968-0A page : (5) / Total (9) Bluetooth LE 1M40 Bluetooth LE 1M 2 402 ㎒ ~ 2 480 ㎒ Operating Frequency 2 422 ㎒ ~ 2 452 ㎒ 7 9802.11n(20 MHz BW)_NII 802.11n(20 MHz BW)_DTS11 802.11n(40 MHz BW)_NII4 2. Equipment under Test(EUT) Information - None 2.3 Modifications of EUT - DC 12.0 V Additional Model Name 2.2 Additional Information POS SYSTEM EKO Product Name Model Name 2.1 General Information Power Supply DTS - Digital Transmission System Device TypeStand-alone Equipment Class NII - National Information Infrastructure 2.4 Reason of Additional Model Name - None 2 412 ㎒ ~ 2 462 ㎒ RF Output Power 802.11n(20 MHz BW) 17.02 ㏈m 802.11n(40 MHz BW) 15.94 ㏈m Bluetooth LE 1M 4.23 ㏈m Number of Channel Antenna Gain 2.63 ㏈i / 0.60 ㏈i 5 180 ㎒ ~ 5 240 ㎒ 5 190 ㎒ ~ 5 230 ㎒ 5 745 ㎒ ~ 5 825 ㎒ 5 755 ㎒ ~ 5 795 ㎒ 802.11n(20 MHz BW) 802.11n(40 MHz BW) 802.11n(40 MHz BW)_DTS Modulation TypeOFDM / GFSK Antenna TypeFPCB Antenna ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241968-0A page : (6) / Total (9) FCC rule part 1.1310 3.1 Test standards and results 3. Test Summary PASS ■ Radiofrequency radiation exposure.FCC rule part 1.1310 ClauseTest itemsAppliedResults ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241968-0A page : (7) / Total (9) 4. Result 4.1.1 Regulation 4.1 RF Exposure FCC rule part 1.1310(d) 4.1.2 Evaluation Method OET Bulletin 65 Section 2: PREDICTION METHODS_Equations for Predicting RF Fields (1) Evaluation with respect to the SAR limits in this section must demonstrate compliance with both the whole-body and peak spatial-average limits using technically supported measurement or computational methods and exposure conditions in advance of authorization (licensing or equipment certification) and in a manner that facilitates independent assessment and, if appropriate, enforcement. Numerical computation of SAR must be supported by adequate documentation showing that the numerical method as implemented in the computational software has been fully validated; in addition, the equipment under test and exposure conditions must be modeled according to protocols established by FCC-accepted numerical computation standards or available FCC procedures for the specific computational method. (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in § 1.1307(b) of this part, except for portable devices as defined in § 2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in § 2.1093. S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) EIRP = equivalent (or effective) isotropically radiated power ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241968-0A page : (8) / Total (9) 4.1.3 Limit Table 1 to § 1.1310(e)(1)—Limits for Maximum Permissible Exposure (MPE) ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241968-0A page : (9) / Total (9) 802.11n (20 MHz BW) Frequency [㎒] 2 462 2 452 2 480 802.11n (40 MHz BW) Bluetooth LE 1M 802.11n (20 MHz BW) 5 825 802.11n (40 MHz BW) 5 795 0.001 221.00 15.94 ± 1.016.942.630.018 02 14.68 ± 1.015.680.600.008 451.00 14.57 ± 1.015.570.600.008 241.00 S(power density [mW/cm 2 ]) = 10^{(Max Tune-up Power [㏈m]+Ant Gain [㏈i])/10} / (4 x π x R 2 ) Power density at 20 ㎝ [㎽/㎠] Limit [㎽/㎠] 17.02 ± 1.018.022.630.023 111.00 Max Power / tolerance [㏈m] Max Tune-up Power [㏈m] Ant Gain [㏈i] Mode 1.00 4.23 ± 1.05.232.63 4.1.4 Result 4.1.5 Conclusion of Simultaneous Transmitter Mode Frequency [㎒] Max Power / tolerance [㏈m] Max Tune-up Power [㏈m] 802.11n (20 MHz BW) 2 46217.02 ± 1.018.02 802.11n (20 MHz BW) 5 82514.68 ± 1.015.680.60 END OF REPORT. Conclusion MPE Limit [㎽/㎠] 1.000.032 0.023 0.001 Ant Gain [㏈i] 2.63 2.63 Power density at 20 ㎝ [㎽/㎠] Bluetooth LE 1M 2 4804.23 ± 1.05.23 0.008 ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241968-0A

Product Specification (TF-WDP-423 2.4G/5G 500mm) FPCB Cable Antenna Confidential Head Office R&D Center : 1010-ho Shinil IT UTO 13 LS-ro , Gunpo-si, Gyeonggi-do, 435-831, Korea Description 2.4G/5G FPCB Cable Antenna Product Specification Specification No. TF-WDP-423 500mm Customer. 포스뱅크 Rev. 1.0 Date JUN 22. 2023 Page 2 / 23 안 테 나 승 인 원 품 명 FPCB CABLE Antenna 모델명 / 대역 2.4GHz / 5GHz 품 번 TF-WDP-423 500mm 고 객 코 드 고 객 명 포스뱅크 공 급 처 TELLESTAR 이 문서는 텔레스타 보안으로 발행 되었으며, 텔레스타의 사전 서면 허가가 없이 이 서류의 일부분 또는 전체를 재 발행 하지 않는다. 공급처 Classification DIRECTOR EXAMINATION APPROVAL RF APPROVAL MECHANICAL 고객명 Classification DIRECTOR EXAMINATION APPROVAL RF APPROVAL MECHANICAL Description 2.4G/5G FPCB Cable Antenna Product Specification Specification No. TF-WDP-423 500mm Customer. 포스뱅크 Rev. 1.0 Date JUN 22. 2023 Page 3 / 23 목 차 1 개정 이력 ....................................................................................................................................................................................... 4 2 기술적 사항................................................................................................................................................................................... 5 2.1 전기적 사양 – 단품 측정 조건 .................................................................................................................. 5 2.2 기구적 사양 ................................................................................................................................................... 5 3 시험조건 ......................................................................................................................................................................................... 7 3.1 시험 환경 조건 ............................................................................................................................................. 7 3.2 시험장비 ......................................................................................................................................................... 7 4 전기적 요구사항 ......................................................................................................................................................................... 8 4.1 정재파비 – 단품 측정 조건...................................................................................................................... 8 4.3 복사 패턴 ....................................................................................................................................................... 9 4.4 안테나 이득 – 단품 측정 조건 .................................................................................................................. 9 5 기타 구비 문서 .......................................................................................................................................................................... 10 5.1 전기적특성 데이터 – 단품 측정 조건 .................................................................................................... 10 5.1-4 방사 패턴 – 단품 측정 조건 ................................................................................................................ 12 6 검사 성적서................................................................................................................................................................................. 14 6.1 검사 성적서 – 단품 측정 조건 ................................................................................................................ 14 7 기구적 요구사항 ....................................................................................................................................................................... 15 7.1 외관 및 구조 ............................................................................................................................................... 15 7.2 외관치수 ....................................................................................................................................................... 15 7.3 낙하시험 ....................................................................................................................................................... 15 8 환경 요구사항 ............................................................................................................................................................................ 16 8.1 고온고습시험 ............................................................................................................................................... 16 8.2 염수분무시험 ............................................................................................................................................... 16 9 FPCB 제조 공정도.................................................................................................................................................................. 17 10 TAPE 사양서............................................................................................................................................................................. 18 11 한화 FPCB 원판 사양서 ................................................................................................................................................... 19 12승인도 .......................................................................................................................................................................................... 21 13 포장사양 ..................................................................................................................................................................................... 22 Description 2.4G/5G FPCB Cable Antenna Product Specification Specification No. TF-WDP-423 500mm Customer. 포스뱅크 Rev. 1.0 Date JUN 22. 2023 Page 4 / 23 1 개정 이력 NO 일 자 변경전 변경후 개정사유 Rev. 1 2023.06.22 신규 1.0 Description 2.4G/5G FPCB Cable Antenna Product Specification Specification No. TF-WDP-423 500mm Customer. 포스뱅크 Rev. 1.0 Date JUN 22. 2023 Page 5 / 23 2 기술적 사항 2.1 전기적 사양 – 단품 측정 조건 주파수 대역 ( Frequency Range) 2400~2485MHz 5150~5875MHz 단말기 정재파비 (V.S.W.R) 5.0 : 1 3.5:1 이득 (Gain) Peak …

Text truncated - open the document above for the full version.

page : (2) / Total (67) Contents 5 6 8 3. Test Summary 4. Test Result 1. Applicant & Manufacturer & Test Laboratory Information 4 2. Equipment under Test(EUT) Information 67 5. Used equipment ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241967-0A page : (3) / Total (67) Initial IssueAllICRT-TR-E241967-0A2024. 07. 22 Revision History Issued Report No.Issued DateRevisionsEffect Section ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241967-0A page : (4) / Total (67) 1. Applicant & Manufacturer & Test Laboratory Information 1.1 Applicant information 1.2 Manufacturer Information 1.3 Test Laboratory Information Applicant Address Laboratory ParameterUncertaintyLimit 2.75%±5 % 1.39 ㏈±1.5 ㏈ 1.65 ㏈±3 ㏈ 1.82 ㏈±3 ㏈ 0.06%±3 %Supply voltages Power Spectral Density, conducted Unwanted Emissions, conducted ±5 % All emissions, radiated (Under the 1 ㎓)±6 ㏈3.22 ㏈ 3.67 ㏈ Applicant Address AURES TECHNOLOGIES S.A. 24 bis rue Léonard de Vinci, 91090 Lisses FRANCE AURES TECHNOLOGIES S.A. 24 bis rue Léonard de Vinci, 91090 Lisses FRANCE Address 112, Hwanggeum 3-ro 7beon-gil, Hagun-ri, Yangchon-eup, Gimpo-si, Gyeonggi-do, Korea +82-2-6351-9002Telephone No. Fax No. 1.4 Measurement Uncertainty ±6 ㏈ Time All emissions, radiated (Above the 1 ㎓) 1.17% ICR Co., Ltd. +82-2-6351-9007 KT652 KR0165 KOLAS No. KC & FCC Occupied Channel Bandwidth RF output power, conducted ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241967-0A page : (5) / Total (67) 2. Equipment under Test(EUT) Information 2.1 General Information 0.60 ㏈i FPCB Antenna 2.2 Additional Information 802.11n(40 MHz BW) 802.11n(20 MHz BW)9 4 Product Name Model Name Additional Model Name FCC ID Power SupplyDC 12.0 V 2AUQF-EKO - EKO POS SYSTEM 2.3 Operating frequency and channel UNII - 1 Stand-alone NII - National Information Infrastructure 5 180 ㎒ ~ 5 240 ㎒ 5 745 ㎒ ~ 5 825 ㎒ 5 755 ㎒ ~ 5 795 ㎒ 14.68 ㏈m Operating Frequency RF Output Power 802.11n(40 MHz BW) 802.11n(20 MHz BW) 14.57 ㏈m Equipment Class Device Type 5 190 ㎒ ~ 5 230 ㎒ 802.11n(20 MHz BW) 802.11n(40 MHz BW) Number of Channel Modulation Type Antenna Type Antenna Gain OFDM 5 755 ㎒5 795 ㎒ - 802.11n(20 MHz BW) ch 36ch 44ch 48 5 180 ㎒5 220 ㎒5 240 ㎒ ※The EUT is continuous transmission mode during the test with set to each of the Low Channel, Middle Channel, and High Channel at the worst case data rate. The worst case data rate for each modulation is determined MCS0 for HT20, HT40. 802.11n(40 MHz BW) ch 38ch 46- 5 190 ㎒5 230 ㎒ - UNII - 3 802.11n(20 MHz BW) ch 149ch 157ch 165 5 745 ㎒5 785 ㎒5 825 ㎒ 802.11n(40 MHz BW) ch 151ch 159- ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241967-0A page : (6) / Total (67) 3.3 Test Methodology - Both conducted and radiated testing was performed according to the procedures in ANSI C63.10: 2013. Radiated testing was performed at a distance of 3 m from EUT to the antenna. 3.4 Configuration of Test System - Both conducted and radiated testing was performed according to the procedures in ANSI C63.10: 2013. Radiated testing was performed at a distance of 3 m from EUT to the antenna. 3.4.1 Radiated emission test §15.407(b), 15.205(a),15.209(a) Radiated Spurious Emission ■ PASS PASS ■ Power Line Conducted Emission§15.207 3. Test Summary - Preliminary radiated emissions test were conducted using the procedure in ANSI C63.10: 2013 to determine the worse operating conditions. Final radiated emission tests were conducted at 3 m Semi Anechoic Chamber. The turntable was rotated through 360 degrees and the EUT was tested by positioned three orthogonal planes to obtain the highest reading on the field strength meter. Once maximum reading was determined, the search antenna was raised and lowered in both vertical and horizontal polarization. ■ - To determine whether the equipment under test fulfills the requirements of the standards stated in section 3.1 and the provision of Article 3.2 of Directive 2014/53/EU 3.2 Purpose of the test ■ PASS ClauseTest itemsAppliedResults FCC Part 15 Subpart E 3.1 Test standards and results PASS ■ PASS ■ PASS§15.407(a) §15.407(a) §15.407(a) §15.407(e) 6 ㏈ Bandwidth Power Spectral Density Maximum Conducted Output Power 26 ㏈ Bandwidth §15.203Antenna Requiremen ■ PASS ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241967-0A page : (7) / Total (67) - According to §15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. And according to §15.247(b)(4), the conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1), (b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. Result: Pass The transmitter has a FPCB Antenna. The directional gain of the antenna is 0.60 ㏈i. 3.5 Antenna requirement ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241967-0A page : (8) / Total (67) 4. Test Result 4.1.3 Test data 4.1 Duty cycle 4.1.1 Test procedure ANSI C63.10-2013 Clause 12.2 4.1.2 Limit - Result : - Mode Low ch_Duty Cycle UNII - 1 802.11n(20 MHz BW) Frequency (MHz) 5 180 5 220 5 240 On Time (ms)Period (ms) Duyu Cycle (%) 1.308 1.307 1.308 1.350 1.350 1.350 96.89 96.81 96.89 ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241967-0A page : (9) / Total (67) Mid ch_Duty Cycle High ch_Duty Cycle ICRT-QPA-17-03 Rev.2 Report No. ICRT-TR-E241967-0A page : (10) / Total (67) M…

Text truncated - open the document above for the full version.