2AUS4-NFJ1Touch interface device

[email protected] www.neat.no Date: 2025-12-16 FCC ID: 2AUS4-NFJ1 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing Neatframe Limited certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing Neatframe Limited certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, ----------------------------------------------- Name: Guangmin Ouyang Designation: Compliance Manager Department: Hardware & Electronics Tel: +47 96685014 Email: [email protected]

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. Cannon Green, 27 Bush Lane, London, EC4R 0AA, United Kingdom www.neat.no U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Signed by (Printed Name/Title): Nathan Grinager / Co-President *This letter is valid indefinitely for all applications submitted within the period of 4/19/2023– 4/19/2028. The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Neatframe Limited Grantee Code: 2AUS4 Contact Name: Guangmin Ouyang Address: 24 Cornhill, London EC3V 3ND, United Kingdom Telephone No: +47 96685014 Email: [email protected] Applicant Signature: Date: 4/21/2023 Signed by (Printed Name/Title): Guangmin Ouyang April 24, 2023 12/17/2025

[email protected] www.neat.no Date: 2025-12-17 FCC ID: 2AUS4-NFJ1 FCC E-Label Information: 1. According to FCC rule part 2.925 (d) justification of using the alternative method of e-labeling for the product The device is equipped with an integrated electronic display; therefore, e-labeling is used in accordance with FCC rules.. 2. According to KDB 784748 D02 e labeling v02 section 4, for devices with an integrated electronic display, or those devices that only operate in conjunction with another associated product that has an electronic display, below info has been stated in e-label and/or user manual. A. User Steps to Access Informa tion From the Teams Interface: 1. Tap More on the Home Screen. 2. Select Settings. 3. Select Device settings. 4. Tap Regulatory certification to view compliance details. From the Zoom Interface: 1. Tap Settings on the Home Screen. 2. Select System Settings. 3. Tap Regulatory certification to view compliance details. B. Products must not require specia l a ccessories or supplementa l plug-ins (e.g., the insta lla tion of a SIM/USIM ca rd) to a ccess the informa tion. The product does not include any structure or design that allows the end user to insert a SIM/USIM card or other plug-in accessories to access regulatory information. All required regulatory information is accessible via the built-in display through the on-screen menu, and no additional hardware or user-installed components are required. [email protected] www.neat.no Rea da bility of Regula tory Informa tion Information on E-label In Manual FCC ID number V FCC logo V 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) V Class A / B Digital Device user manual statements V Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment V Above info which displayed electronically is clearly legible no need to aid of magnification, please see below e-label screen. C. Regula tory Informa tion must be Secure The regulatory information and dedicated exclusive application(s) or script(s) will be secured and implemented in a factory-set-unalterable format. The regulatory information will be capable of being retrieved and displayed locally and access by the end user. The info is no way to modify by end user. D. Physica l a nd Tempora ry la bel for Purcha sing a nd Importa tion Although the e-label has been used, below info will also on the packaging, at the time of importation, marketing, and sales. 1. FCC ID 2. Product name 3. Model E. Additiona l Considera tions(Modula r tra nsmitters) Device is not a modular device. [email protected] www.neat.no ----------------------------------- Name: Guangmin Ouyang Designation: Compliance Manager Department: Hardware & Electronics Tel: +47 96685014 Email: [email protected] [email protected] www.neat.no [email protected] www.neat.no

[email protected] www.neat.no Date: 2025-12-16 FCC ID: 2AUS4-NFJ1 To the attention of: Federal Communications Commission Authorization and Evaluation Division Declaration Letter for Low Power Indoor Client Devices (6XD) We, Neatframe Limited, attest that this device under FCC ID: 2AUS4-NFJ1 complies with device protocol requirements and operational restrictions for Indoor Client Devices (6XD). a) This device will only associate and connect with a low-power indoor access point or subordinate device and never directly connects to other client devices. b) This device will always initiate transmission under the control of a low power indoor AP or subordinate except for brief transmissions before joining a network. These short messages will only occur if this client has detected an indoor AP or subordinate operating on a channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request. c) All transmissions will be lower or equal to the power advertised by the indoor low-power access point or subordinate and never above the maximum output power allowed by the FCC grant for equipment class 6XD. d) This device employs a Contention-Based Protocol as demonstrated in the test report. e) We understand and acknowledge that this device is subject to the following restrictions, which are also documented within the user manual: • This device is prohibited for control of or communications with unmanned aircraft systems, including drones. If you should have any questions regarding this declaration, please do not hesitate to contact us, thank you! Sincerely yours, ----------------------------------- Name: Guangmin Ouyang Designation: Compliance Manager Department: Hardware & Electronics Tel: +47 96685014 Email: [email protected]

[email protected] www.neat.no Date: 2025-12-16 FCC ID: 2AUS4-NFJ1 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ---------------------------------- Name: Guangmin Ouyang Designation: Compliance Manager Department: Hardware & Electronics Tel: +47 96685014 Email: [email protected]

[email protected] www.neat.no Date: 2025-12-16 FCC ID: 2AUS4-NFJ1 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------- Name: Guangmin Ouyang Designation: Compliance Manager Department: Hardware & Electronics Tel: +47 96685014 Email: [email protected]

[email protected] www.neat.no Date: 2025-12-16 FCC ID: 2AUS4-NFJ1 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: Neatframe Limited hereby authorizes Jenny NIEN / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Jenny NIEN / Specialist of BV CPS Taoyuan on Neatframe Limited’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Name: Guangmin Ouyang Designation: Compliance Manager Department: Hardware & Electronics Tel: +47 96685014 Email: [email protected]

FCC ID:2AUS4-NFJ1 EUT EUT Screen From the Teams Interface: 1.Tap More on the Home Screen. 2.Select Settings. 3.Select Device settings. 4.Tap Regulatory certification to view compliance details. From the Zoom Interface: 1.Tap Settings on the Home Screen. 2.Select System Settings. 3.Tap Regulatory certification to view compliance details.

Report No.: MFBDKX-WTW-P25090552 Page No. 1 / 8 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P25090552 RF EXPOSURE REPORT CERTIFICATE OF CONFORMITY FCC Rule Part: FCC Part 2 (Section 2.1091) Report No.: MFBDKX-WTW-P25090552 FCC ID: 2AUS4-NFJ1 Product: Touch interface device Trademark/ Brand: NEAT/ neat. Model No.: NF-J1 Received Date: 2025/9/22 Test Date: 2025/12/3 Issued Date: 2025/12/15 Applicant: Neatframe Limited Address: 24 Cornhill, London EC3V 3ND, United Kingdom Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 Approved by: , Date: 2025/12/15 Jeremy Lin / Project Engineer This test report consists of 8 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Annie Chang / Senior Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBDKX-WTW-P25090552 Page No. 2 / 8 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P25090552 Table of Contents Release Control Record ....................................................................................................................................................... 3 1 Certificate .................................................................................................................................................................... 4 2 Applicable RF Exposure Limit .................................................................................................................................. 5 3 Test Results ................................................................................................................................................................ 7 4 Conclusion .................................................................................................................................................................. 7 5 Information of the Testing Laboratories .................................................................................................................. 8 Report No.: MFBDKX-WTW-P25090552 Page No. 3 / 8 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P25090552 Release Control Record Issue No. Description Date Issued MFBDKX-WTW-P25090552 Original release. 2025/12/15 Report No.: MFBDKX-WTW-P25090552 Page No. 4 / 8 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P25090552 1 Certificate Product: Touch interface device Trademark/ Brand: NEAT/ neat. Test Model: NF-J1 Sample Status: Engineering sample Applicant: Neatframe Limited Test Date: 2025/12/3 FCC Rule Part: FCC Part 2 (Section 2.1091) Standard: KDB 447498 D04 Interim General RF Exposure Guidance v01 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Report No.: MFBDKX-WTW-P25090552 Page No. 5 / 8 Report Format Version: 7.1.0 Reference No.: BDKX-WTW-P25090552 2 Applicable RF Exposure Limit § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part within the frequency range of 100 kHz to 6 GHz (inclusive). (b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit for occupational/controlled exposure is 20 W/kg, averaged over any 10 grams of tissu…

Text truncated - open the document above for the full version.

INPAQ TECHNOLOGY CO., LTD 2025/12/16 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：黃建棠 CHECKED BY：鄭榮謀 DESIGNED BY：劉昌治 APPROVED BY：謝立庭 TITLE：Embedded Multi-Band Antenna for WA-F-LE-01-018 DOCUMENT ENS000212940 SPEC REV. NO. P2 PAGE 1 OF 4 Embedded Multi-Band Antenna for WA-F-LE-01-018 1. Explanation of part number： WA _ F _ LE _ 01 _ 018 (1) (2) (3) (4) (5) (1) Product Type：Wireless Antenna (2) Material：FPCB (3) Frequency：2400~2500/5150~5850/5925~7125 MHz (4) Coaxial Cable Type：Black (5) Suffix：018 2. Electrical Specification： Those specifications were specially defined for Jura Aux Antenna model Multi-Band Antenna, and all characteristics were measured under the model’s handset testing jig. 2-1. Frequency Band： Frequency Band MHz WIFI 6E 2400~2500、5150~5850、5925~7125 MHz 2-2. Impedance： 50 ohm nominal 2-3. Matching circuit： None INPAQ TECHNOLOGY CO., LTD 2025/12/16 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：黃建棠 CHECKED BY：鄭榮謀 DESIGNED BY：劉昌治 APPROVED BY：謝立庭 TITLE：Embedded Multi-Band Antenna for WA-F-LE-01-018 DOCUMENT ENS000212940 SPEC REV. NO. P2 PAGE 2 OF 4 2-4. VSWR： 2-5. Efficiency & Peak gain： INPAQ TECHNOLOGY CO., LTD 2025/12/16 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：黃建棠 CHECKED BY：鄭榮謀 DESIGNED BY：劉昌治 APPROVED BY：謝立庭 TITLE：Embedded Multi-Band Antenna for WA-F-LE-01-018 DOCUMENT ENS000212940 SPEC REV. NO. P2 PAGE 3 OF 4 2-6. 2D radiation pattern： INPAQ TECHNOLOGY CO., LTD 2025/12/16 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：黃建棠 CHECKED BY：鄭榮謀 DESIGNED BY：劉昌治 APPROVED BY：謝立庭 TITLE：Embedded Multi-Band Antenna for WA-F-LE-01-018 DOCUMENT ENS000212940 SPEC REV. NO. P2 PAGE 4 OF 4 3. Antenna Drawing： The appearance of the antenna is according to drawing Figure . 3-1-1 TOP BOTTOM R E531078 3M467 Side 0.2 ±0.03 FPCB+DY958 * *# *# * 4 2 1 White text DY958:0.05T Conductive Adhesive FPCB+3M467 Include Solder Point (Exclude liner paper thickness) (Exclude liner paper thickness) 3 2 NOTE: 1. 外觀標準 :依INPAQ檢驗標準出貨。 Appearance standard be mainly with inpaq. 2. 工程圖上"*"號為重點尺寸標註指示 Mark "*" are the key dimensions. 3.工程圖上"#"號為Cpk量測尺寸標註指示 Mark "#" are CPK dimensions. 4. IQC & OQC & FQC只需量測重點尺寸 CPK & KEY dimensions for IQC & OQC & FQC. 5. 洋紅色:導通孔 Pink:Via hole 6. 黃色:裸銅區，表面處理:osp Yellow::Bare copper, surface treatment:osp Drawing Rev.P8 Figure 3-1-1. ITEM DESCRIPTION MATERIAL SPECIFICATION QUANTITY UNIT 1 Fpcb with adhesive(3M467) L48.5xW31.44x0.16Tmm 1 PCS 2 Cable OD1.13mm, LLS, White 1 PCS 3 Connector I-PEX MHF I 1 PCS 4 Tube/transparent OD2.5x8mm 1 PCS

INPAQ TECHNOLOGY CO., LTD 2025/12/15 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：黃建棠 CHECKED BY：鄭榮謀 DESIGNED BY：劉昌治 APPROVED BY：謝立庭 TITLE：Embedded Multi-Band Antenna for WA-F-LE-02-068 DOCUMENT ENS000212930 SPEC REV. NO. P2 PAGE 1 OF 4 Embedded Multi-Band Antenna for WA-F-LE-02-068 1. Explanation of part number： WA _ F _ LE _ 02 _ 068 (1) (2) (3) (4) (5) (1) Product Type：Wireless Antenna (2) Material：FPCB (3) Frequency：2400~2500/5150~5850/5925~7125 MHz (4) Coaxial Cable Type：Black (5) Suffix：068 2. Electrical Specification： Those specifications were specially defined for Jura Main Antenna model Multi-Band Antenna, and all characteristics were measured under the model’s handset testing jig. 2-1. Frequency Band： Frequency Band MHz WIFI 6E 2400~2500、5150~5850、5925~7125 MHz 2-2. Impedance： 50 ohm nominal 2-3. Matching circuit： None INPAQ TECHNOLOGY CO., LTD 2025/12/15 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：黃建棠 CHECKED BY：鄭榮謀 DESIGNED BY：劉昌治 APPROVED BY：謝立庭 TITLE：Embedded Multi-Band Antenna for WA-F-LE-02-068 DOCUMENT ENS000212930 SPEC REV. NO. P2 PAGE 2 OF 4 2-4. VSWR： 2-5. Efficiency & Peak gain： INPAQ TECHNOLOGY CO., LTD 2025/12/15 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：黃建棠 CHECKED BY：鄭榮謀 DESIGNED BY：劉昌治 APPROVED BY：謝立庭 TITLE：Embedded Multi-Band Antenna for WA-F-LE-02-068 DOCUMENT ENS000212930 SPEC REV. NO. P2 PAGE 3 OF 4 2-6. 2D radiation pattern： INPAQ TECHNOLOGY CO., LTD 2025/12/15 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：黃建棠 CHECKED BY：鄭榮謀 DESIGNED BY：劉昌治 APPROVED BY：謝立庭 TITLE：Embedded Multi-Band Antenna for WA-F-LE-02-068 DOCUMENT ENS000212930 SPEC REV. NO. P2 PAGE 4 OF 4 3. Antenna Drawing： The appearance of the antenna is according to drawing Figure . 3-1-1 TOP BOTTOM 3M467 Side R E531078 White text 3M467 * O 3 . 5 *# * *# 2 4 3 3 * Include Solder Point (Exclude liner paper thickness) NOTE: 1. 外觀標準 : 依 INPAQ 檢驗標準出貨。 Appearance standard be mainly with inpaq. 2. 工程圖上 "*" 號為重點尺寸標註指示 Mark "*" are the key dimensions. 3. 工程圖上 "#" 號為 Cpk 量測尺寸標註指示 Mark "#" are CPK dimensions. 4. IQC & OQC & FQC 只需量測重點尺寸 CPK & KEY dimensions for IQC & OQC & FQC. 5. 洋紅色 : 導通孔 Pink: Via hole 6. 黃色 : 裸銅區，表面處理 :osp Yellow ::Bare copper, surface treatment:osp Drawing Rev.P8 Figure 3-1-1. ITEM DESCRIPTION MATERIAL SPECIFICATION QUANTITY UNIT 1 Fpcb with adhesive(3M467) L30xW31.78x0.16Tmm 1 PCS 2 Cable OD1.13mm, LLS, Black 1 PCS 3 Connector I-PEX MHF I 1 PCS 4 Tube/transparent OD2.5x8mm 1 PCS

Report No.: RFBDKX-WTW-P25090552-4 Page No. 1 / 147 Report Format Version: 7.2.0 Reference No.: BDKX-WTW-P25090552 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart E (Section 15.407) Report No.: RFBDKX-WTW-P25090552-4 FCC ID: 2AUS4-NFJ1 Product: Touch interface device Trademark/ Brand: NEAT/ neat. Model No.: NF-J1 Received Date: 2025/9/22 Test Date: 2025/10/31 ~ 2025/12/4 Issued Date: 2025/12/15 Applicant: Neatframe Limited Address: 24 Cornhill, London EC3V 3ND, United Kingdom Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location(1): No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location(2): No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: Test Location: 198487 / TW2021 for Test Location(1) 788550 / TW0003 for Test Location(2) Approved by: , Date: 2025/12/15 Jeremy Lin / Project Engineer This test report consists of 147 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Annie Chang / Senior Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBDKX-WTW-P25090552-4 Page No. 2 / 147 Report Format Version: 7.2.0 Reference No.: BDKX-WTW-P25090552 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results ......................................................................…

Text truncated - open the document above for the full version.