2AUYFRMA2006realme Watch 2 Pro

! ! ! ! ! ! ! ! ! ! ! ! ! ! AUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS: ! Do not disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. ! Do not leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. ! Do not expose the battery to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Realme Chongqing Mobile Telecommunications Corp., Ltd. Date: 12/17/2020 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AUYFRMA2006 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Realme Chongqing Mobile Telecommunications Corp., Ltd.. This authorization is valid until further written notice from the applicant. Name (Printed): LiangPing Yang Title: Manager Signature: On behalf of Company: Realme Chongqing Mobile Telecommunications Corp., Ltd.

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Realme Chongqing Mobile Telecommunications Corp., Ltd. Address No.178 Yulong Avenue, Yufengshan Yubei District, Chongqing, China Grantee Code 2AUYF FCC ID 2AUYFRMA2006 Authorized Contact Name LiangPing Yang Contact Email [email protected] Contact Phone 86 76986076999 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:12/17/2020 Print Name: LiangPing Yang Title: Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

RealmeChongqingMobileTelecommunicationsCorp.,Ltd. To:SGSNorthAmericaInc. 620OldPeachtreeRoad SUITE100 Suwanee,Georgia UnitedStates From:RealmeChongqingMobileTelecommunicationsCorp.,Ltd. No.178YulongAvenue,YufengshanYubeiDistrict Chongqing,China Regarding:ConfidentialityRequestregardingapplicationforFCCID:2AUYFRMA2006 LONGTERMCONFIDENTIALITY Pursuantto47CFRSection0.459and0.457ofthecommission’srules,theapplicantherebyrequest confidentialtreatmentofthedocumentslistedbelow,associatedwiththecertificationapplication referencedabove. Schematic(s) BlockDiagrams OperationalDescriptions Thedocumentsabovecontainproprietaryinformationnotreleasedtothepublic.Publicdisclosureofthis informationmayproveharmfultothebusinessoftheapplicant. SHORTTERMCONFIDENTIALITY Additionally,theapplicantrequeststhefollowingdocumentsbeheldconfidentialuntilthedeviceis marketedor180daysfromthegrantdate,whicheverisless.Ifthedeviceismarketedwithin180daysof theGrantDate,theapplicantwillnotifytheTCBperFCCKDB726920D01ConfidentialityRequest Procedures. ExternalPhotos InternalPhotos TestSetupPhotos Usermanual(s) Sincerely, Name(Printed):LiangPingYangTitle:Manager Signature: OnbehalfofCompany:RealmeChongqingMobileTelecommunicationsCorp.,Ltd.

External Photo

FCC ID : 2AUYFRMA2006

Internal Photo BT antenna

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201201739303 Page: 1 of 9 FCC ID: 2AUYFRMA2006 Kobe Jian EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: GZEM2012017393CR Applicant: Realme Chongqing Mobile Telecommunications Corp., Ltd. Address of Applicant: No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing, China. Equipment Under Test (EUT): FCC ID: 2AUYFRMA2006 EUT Name: realme Watch 2 Pro Model No.: RMA2006 Trade Mark: realme Standard(s): 47 CFR Part 1.1307, Part 2.1093, KDB 447498 Date of Receipt: 2020-12-18 Date of Evaluation: 2020-12-19 to 2020-12-23 Date of Issue: 2020-12-30 Evaluation Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201201739303 Page: 2 of 9 Revision Record Version Chapter Date Modifier Remark 01 2020-12-30 Original Authorized for issue by: Evaluated By 2020-12-19 to 2020-12-23 Kevin_Zhang /Project Engineer Date Checked By 2020-12-30 Ricky_Liu /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201201739303 Page: 3 of 9 2 Evaluation Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result RF Exposure 47 CFR Part 1.1307, Part 2.1093, KDB 447498 CFR 47 Part 2.1093 CFR 47 Part 2.1093 Pass SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201201739303 Page: 4 of 9 3 Contents Page 1 Cover Page .............................................................................................................................................. 1 2 Evaluation Summary .............................................................................................................................. 3 3 Contents ................................................................................................................................................. 4 4 General Information ............................................................................................................................... 5 4.1 Details of E.U.T................................................................................................................................ 5 4.2 Description of Support Units............................................................................................................. 5 4.3 Test Location ................................................................................................................................... 5 4.4 Test Facility ..................................................................................................................................... 6 4.5 Deviation from Standards ................................................................................................................. 7 4.6 Abnormalities from Standard Conditions .......................................................................................... 7 5 Radio Spectrum Technical Requirement .............................................................................................. 8 5.1 RF Exposure.................................................................................................................................... 8 5.1.1 Test Requirement: ....................................................................................................................... 8 5.1.2 Conclusion .................................................................................................................................. 8 6 Photographs ........................................................................................................................................... 9 6.1 EUT Constructional Details .............................................................................................................. 9 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201201739303 Page: 5 of 9 4 General Information 4.1 Details of E.U.T. Power Supply: DC 5V for charging DC 3.85 V for normal working powered by built-in battery as below: Model: XE205 Rated: DC 3.85 V, 390 mAh, 1.502 Wh Cable: For main unit: DC charging ports For charger: USB input cables DC output ports Function: Watch with BLE function Antenna Gain: 0 dBi declared by applicant Antenna Type: Integral Antenna Channel Spacing: 2MHz Modulation Type: GFSK Number of Channels: 40 Operation Frequency: 2402MHz to 2480MHz Hardware: LS450-R-V3 Software: SV01 S/N: GZ_SP_20210102327 Test Software sscom32.exe Power Setting -0.81 dBm can not be changed by user 4.2 Description of Support Units The EUT has been tested as an independent unit. 4.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201201739303 Page: 6 of 9 4.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations:  NVLAP (Lab Code: 200611-0) SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP/NIST). NVLAP Code: 200611-0. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.  ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian C-Tick mark as a result of our NVLAP accreditation.  SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES.  CNAS (Lab Cod…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201201739302 Page: 1 of 54 FCC ID: 2AUYFRMA2006 Kobe Jian EMC Laboratory Manager TEST REPORT Application No.: GZEM2012017393CR Applicant: Realme Chongqing Mobile Telecommunications Corp., Ltd. Address of Applicant: No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing, China. Equipment Under Test (EUT): FCC ID: 2AUYFRMA2006 EUT Name: realme Watch 2 Pro Model No.: RMA2006 Trade Mark: realme Standard(s): 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2020-12-18 Date of Test: 2020-12-19 to 2020-12-23 Date of Issue: 2020-12-30 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201201739302 Page: 2 of 54 Revision Record Version Chapter Date Modifier Remark 01 2020-12-30 Original Authorized for issue by: Tested By 2020-12-19 to 2020-12-23 Kevin_Zhang /Project Engineer Date Checked By 2020-12-30 Ricky_Liu /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201201739302 Page: 3 of 54 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(c) Pass N/A: Not applicable Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM201201739302 Page: 4 of 54 3 Contents Page 1 Cover Page .............................................................................................................................................. 1 2 Test Summary ........................................................................................................................................ 3 3 Contents ................................................................................................................................................. 4 4 General Information ............................................................................................................................... 6 4.1 Details of E.U.T................................................................................................................................ 6 4.2 Description of Support Units............................................................................................................. 6 4.3 Measurement Uncertainty ................................................................................................................ 7 4.4 Test Location ................................................................................................................................... 7 4.5 Test Facility ..................................................................................................................................... 8 4.6 Deviation from Standards ................................................................................................................. 9 4.7 Abnormalities from Standard Conditions .......................................................................................... 9 4.8 Duty cycle of the EUT ...................................................................................................................... 9 5 Equipment List ..................................................................................................................................... 10 6 Radio Spectrum Technical Requirement ............................................................................................ 13 6.1 Antenna Requirement .................................................................................................................... 13 6.1.1 Test Requirement: ..................................................................................................................... 13 6.1.2 Conclusion ................................................................................................................................ 13 7 Radio Spectrum Matter Test Results................................................................................................... 14 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) ............................................................. 14 7.1.1 E.U.T. Operation........................................................................................................................ 14 7.1.2 Test Setup Diagram ................................................................................................................... 14 7.1.3 Measurement Procedure and Data ........................................................................................... 15 7.2 Minimum 6dB Bandwidth .....................................................…

Text truncated - open the document above for the full version.

Test Setup Photo 1.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup 1.2 RF Conducted Test Setup 1.3 Radiated Emissions which fall in the restricted bands & Radiated Spurious Emissions Test Setup