2AUYFRMX2063Mobile Phone

1 English This guide will show you how to use the phone and its important functions. You may also visit realme ocial website to get more information about the phone. Greetings from realme mobile Warning Do not place the phone or battery near or inside heating equipment, cooking equipments, high pressure vessels (such as microwave ovens, induction cooker, electric oven, heater, pressure cooker, water heater, gas stove, etc.) to prevent the battery overheating which may lead to an explosion. Back cover can’t be removed. The original charger, data cable and battery shall be used. Unapproved chargers, data cables, or batteries that are not certied by the manufacturer may result in electric shock, re, explosion, or other hazards. Standard accessories 1 Phone, 1 Charger, 1 USB data cable, 1 Safety Guide, 1 Quick Guide, 1 SIM Ejector Tool, 1 Protective Case . When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with temperature ranging from 5°C~35°C. How to reboot the phone Press and hold the Power Button and Volume Up Button at the same time until the realme boot animation is displayed to reboot the phone. How to Transfer Old Mobile Content to a New Mobile You can use realme Clone Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one. 1. If you have an old Android phone, rst scan the QR code below, then download and install Clone Phone, next open Clone Phone on both the new and old phones, and follow the on-screen instructions to complete the operation. 2. If you have an old iPhone, open Clone Phone on the new phone directly, and follow on-screen instructions to sign in to iCloud account and sync the les. https://i.clonephone.coloros.com/download / Fingerprint Scanner 2 RMX2063 16.7cm(6.6’’) 163.9×75.8×9.4 4210 mAh/16.29Wh(Min) 4300mAh/16.64Wh(Typ) Radio Waves Specications WCDMA LTE TDD Bluetooth 2.4G Wi-Fi LTE FDD GSM 5G Wi-Fi Radio Max. Output PowerFrequency Bands 5/8/20/28 Band 7 Bands 1/2/4 Bands 5/8 Bands 1/2/3/4 Bands 38/40/41 850MHz/900MHz 1800MHz 1900MHz 2.4-2.4835GHz NFC ≤42dBuA/m @10m13.56MHz 2.4-2.4835GHz xxxxW/kg(Head) xxxxW/kg(Body) 5.15-5.35GHz5.47-5.725GHz 5.725-5.85GHz RCM SAR xxxxW/kg(Head) xxxxW/kg(Body) 32.5±1dBm 30.0±1dBm 23.0±1dBm 29.5±1dBm 23.3±1dBm 23.0±1dBm 23.0±1dBm 23.3±1dBm 22.5±1dBm 8±2dBm(EIRP) 15.5±1.5dBm(EIRP) 15±1.5dBm(EIRP) 11.5±1.5dBm(EIRP) 64Megapixels+13Megapixels +8Megapixels+2Megapixels Rear 16Megapixels+8Megapixels Front Accesorios incluidos 1 Teléfono, 1 Cargador, 1 Cable USB, 1 Guía de seguridad, 1 Guía rápida, 1 Herramienta de extracción de tarjeta SIM, 1 Funda protectora. 3 Bienvenido a realme mobile Esta guía le mostrará el uso del teléfono además de sus funciones más importantes. También, puede visitar nuestra página web ocial de realme donde obtendrá mayor información sobre el mismo. Cómo forzar el reinicio del teléfono Mantenga presionados los botones de Encendido y Vol (+) hasta que aparezca la animación de inicio de realme para forzar el renicio del teléfono. Puede utilizar la función de realme "Clonar Teléfono" para transferir rápidamente sus fotos, vídeos, música, contactos y aplicaciones a su nuevo teléfono desde el antiguo. Para ello, siga estos pasos: 1. Si tiene un teléfono Android, primero escanee el código QR que aparece a continuación, seguidamente descargue e instale “Clonar Teléfono”, abra la aplicación en ambos teléfonos y siga las instrucciones que aparecen en pantalla para completar la operación. 2. Si tiene un iPhone antiguo, abra “Clonar Teléfono” directamente en el nuevo teléfono y siga las instrucciones que aparecen en pantalla para iniciar sesión en la cuenta de iCloud y sincronizar los archivos. Advertencia No coloque el teléfono o la batería cerca o dentro de equipos de calefacción, electrodomésticos (microondas, cocinas de cualquier tipo, hornos de cualquier tipo o calefactores etc.), menaje de cocina (ollas a presión etc.), para evitar que la batería se sobrecaliente y/o provoque daños en su dispositivo. Debe utilizar el cargador, cable y batería originales. Los cargadores, cables o baterías que no cuenten con la autorización y la certicación del fabricante pueden derivar en diversos problemas como; descargas elétricas, incendios, explosiones, daños en la batería u otros peligros. La carcasa trasera no es extraible. Al cargar el dispositivo, colóquelo en un entorno que tenga una temperatura ambiente y ventilación normales. Es recomendable que el dispositivo sea cargado en un entorno con una temperatura que oscile entre 5 °C y 35 °C. Botón de encendido / Fingerprint Scanner Botones de volumen Cámara frontal https://i.clonephone.coloros.com/download 163,9×75,8×9,4 (mm) 4 Especicaciones técnicas Batería Cámara Producto Dimensiones valores SAR Tamaño de la pantalla 6,6 Pulgadas Cuádruple cámara trasera de 64 Mpx + 13 Mpx + 8 Mpx + 2 Mpx Cámara delantera de 16 Mpx + 8 Mpx Temperatura para el correcto funcionamiento RMX2063 4210mAh/16,29Wh(Min) 4300mAh/16,64Wh(Typ) XXXXW/kgCabeza) XXXXW/kg(Cuerpo) Especicaciones de ondas de radio FrecuenciaPotencia máx. de salidaRadio 15,5±1,5dBm(EIRP) 15±1,5dBm(EIRP) 11,5±1,5dBm(EIRP) WCDMA LTE TDD Bluetooth 2,4 G Wi-Fi LTE FDD GSM 5G Wi-Fi Bands 5/8/20/28 Band 7 Bands 1/2/4 Bands 5/8 Bands 1/2/3/4 Bands 38/40/41 850MHz/900MHz 1800MHz 1900MHz 2,4-2,4835GHz NFC ≤42dBuA/m @10m13,56MHz 2,4-2,4835GHz 5,15-5,35GHz5,47-5,725GHz 5,725-5,85GHz 32,5±1dBm 30,0±1dBm 23,0±1dBm 29,5±1dBm 23,3±1dBm 23,0±1dBm 23,0±1dBm 23,3±1dBm 22,5±1dBm 8±2dBm(EIRP) 5 In dieser Anleitung nden Sie Erläuterungen zur Benutzung des Mobiltelefons und seinen wichtigsten Funktionen. Weitere Informationen stehen Ihnen auch auf der oziellen Website von realme zur Verfügung. Das Telefon und den Akku nicht in der Nähe von Heizgeräten, Kochgeräten oder Hochdruckbehältern (wie Mikrowellengeräte, Induktionskochfelder, Elektroherde, Heizkörper, Schnellko…

Text truncated - open the document above for the full version.

Realme Chongqing Mobile Telecommunications Corp., Ltd. Agent Authorization Company: Realme Chongqing Mobile Telecommunications Corp., Ltd. Address: No.178 Yulong Avenue, Yufengshan Yubei District, Chongqing, China. Product Name: Mobile Phone Model Number(s): RMX2063 Product Description: Mobile Phone We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jan. 10, 2020 Name: Yang Liangping Title: Manager Company: Realme Chongqing Mobile Telecommunications Corp., Ltd.

RealMe重庆移动通信有限公司Realme Chongqing Mobile Telecommunications Corp., Ltd. 重庆市渝北区回兴街道霓裳大道24号2幢 No.2 Building, No.24 Nichang Boulevard, Huixing Block, Yubei District, Chongqing, China Date: Jan. 10, 2020 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The Realme Chongqing Mobile Telecommunications Corp., Ltd., the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen BALUN Technology Co., Ltd., to act on the behalf of the Realme Chongqing Mobile Telecommunications Corp., Ltd. solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AUYFRMX2063 including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of the Realme Chongqing Mobile Telecommunications Corp., Ltd.. The Realme Chongqing Mobile Telecommunications Corp., Ltd. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely, Name of the Manager: Yang Liangping Position: Manager Date: Jan. 10, 2020 Signature:

RealMe重庆移动通信有限公司Realme Chongqing Mobile Telecommunications Corp., Ltd. 重庆市渝北区回兴街道霓裳大道24号2幢 No.2 Building, No.24 Nichang Boulevard, Huixing Block, Yubei District, Chongqing, China To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 RE: Realme Chongqing Mobile Telecommunications Corp., Ltd FCC ID: 2AUYFRMX2001 FCC Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. Realme Chongqing Mobile Telecommunications Corp., Ltd requests that the following documents regarding this submission for FCC ID: 2AUYFRMX2063 be kept Long-Term confidential: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operational Description Operational Description.pdf Operational Description software security information pdf Part list BOM.pdf Tune-Up-Procedure Tune up procedure.pdf And below exhibit kept short-term confidential(180 days): Exhibit Type File Name External Photos External Photos.pdf Internal Photos Internal Photos.pdf Test Setup Photos Test Setup Photos.pdf Users Manuals Users Manual.pdf Those documents contain detailed system and equipment description and related information about the product which Realme Chongqing Mobile Telecommunications Corp., Ltd considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Realme Chongqing Mobile Telecommunications Corp., Ltd considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Thank you for your attention to this matter. Yours Sincerely, Name of the Manager: Yang Liangping Position: Manager Date: Jan. 10, 2020 Signature:

Annex No.: BL-SZ19C0366-AW 1 / 7 EUT EXTERNAL PHOTOS FRONT VIEW OF EUT REAR VIEW OF EUT Annex No.: BL-SZ19C0366-AW 2 / 7 LEFT SIDE VIEW OF EUT RIGHT SIDE OF EUT Annex No.: BL-SZ19C0366-AW 3 / 7 TOP VIEW OF EUT c BOTTOM VIEW OF EUT Annex No.: BL-SZ19C0366-AW 4 / 7 Accessory-Power Adapter (VC56HAUH US Plug) CLOSE-UP Annex No.: BL-SZ19C0366-AW 5 / 7 Accessory-Power Adapter (VC56JAUH US Plug) CLOSE-UP Annex No.: BL-SZ19C0366-AW 6 / 7 Accessory-Power Adapter (VC56GAUH US Plug) CLOSE-UP Annex No.: BL-SZ19C0366-AW 7 / 7 Accessory-USB Cable

35x25mm Label Label location(device back side) IMEI2: IMEI1: S/N: Mobile Phone Designed by realmeAssembled in China Realme Chongqing Mobile Telecommunications Corp., Ltd. FCC ID: 2AUYFRMX2063 Model:RMX2063

Annex No.: BL-SZ19C0366-AI 1 / 11 EUT INTERNAL PHOTOS EUT UNCOVER VIEW EUT UNCOVER VIEW BT/WIFI+GPS Antenna 2/3/4G Antenna GPS-L5 Antenna 2/3/4G Antenna NFC Antenna Annex No.: BL-SZ19C0366-AI 2 / 11 EUT UNCOVER VIEW EUT UNCOVER VIEW Annex No.: BL-SZ19C0366-AI 3 / 11 MAIN BOARD TOP VIEW (WITH SHIELDING) MAIN BOARD REAR VIEW (WITH SHIELDING) Annex No.: BL-SZ19C0366-AI 4 / 11 MAIN BOARD TOP VIEW (WITHOUT SHIELDING) MAIN BOARD REAR VIEW (WITHOUT SHIELDING) RF Chip Annex No.: BL-SZ19C0366-AI 5 / 11 SUB BOARD TOP VIEW SUB BOARD REAR VIEW Annex No.: BL-SZ19C0366-AI 6 / 11 Battery Photo (Sunwoda Electronic Co., Ltd.) (FRONT) Battery Photo (Sunwoda Electronic Co., Ltd.) (REAR) Annex No.: BL-SZ19C0366-AI 7 / 11 Battery Photo (Dongguan NVT Technology Co., Ltd.) (FRONT) Battery Photo (Dongguan NVT Technology Co., Ltd.) (REAR) Annex No.: BL-SZ19C0366-AI 8 / 11 Battery Photo (TWS TECHNOLOGY (GUANGZHOU) LIMITED) (FRONT) Battery Photo (TWS TECHNOLOGY (GUANGZHOU) LIMITED) (REAR) Annex No.: BL-SZ19C0366-AI 9 / 11 Battery Photo (SUNWODA ELECTRONIC INDIA PRIVATE LIMITED) (FRONT) Battery Photo (SUNWODA ELECTRONIC INDIA PRIVATE LIMITED) (REAR) Annex No.: BL-SZ19C0366-AI 10 / 11 Battery Photo (Navitasys India Private Limited) (FRONT) Battery Photo (Navitasys India Private Limited) (REAR) Annex No.: BL-SZ19C0366-AI 11 / 11 Battery Photo (PT.BATTERY TECHNOLOGY INDONESIA) (FRONT) Battery Photo (PT.BATTERY TECHNOLOGY INDONESIA) (REAR)

Report No.: BL-SZ19C0366-701 2 / 182 Revision History Version Issue Date Revisions Content Rev. 01 Jan. 21, 2020 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION .................................................................................................................... 5 1.1 Identification of the Testing Laboratory ..................................................................................... 5 1.2 Identification of the Responsible Testing Location .................................................................... 5 1.3 Test Environment Condition ..................................................................................................... 5 1.4 Announce ................................................................................................................................. 6 2 PRODUCT INFORMATION ................................................................................................................... 7 2.1 Applicant Information ................................................................................................................ 7 2.2 Manufacturer Information .......................................................................................................... 7 2.3 Factory Information ................................................................................................................... 7 2.4 General Description for Equipment under Test (EUT) ............................................................... 7 2.5 Ancillary Equipment .................................................................................................................. 8 2.6 Technical Information ............................................................................................................. 10 2.7 Power Reduction Description.................................................................................................. 12 3 SUMMARY OF TEST RESULT ........................................................................................................... 14 3.1 Test Standards ....................................................................................................................... 14 3.2 Device Category and SAR Limit ............................................................................................. 15 3.3 Test Result Summary ............................................................................................................. 16 3.4 Test Uncertainty ..................................................................................................................... 18 4 MEASUREMENT SYSTEM ................................................................................................................. 19 4.1 Specific Absorption Rate (SAR) Definition .............................................................................. 19 4.2 DASY SAR System ................................................................................................................ 20 5 SYSTEM VERIFICATION .................................................................................................................... 27 5.1 Purpose of System Check ...................................................................................................... 27 5.2 System Check Setup .............................................................................................................. 27 6 TEST POSITION CONFIGURATIONS ................................................................................................ 28 6.1 Head Exposure Conditions ..................................................................................................... 28 Report No.: BL-SZ19C0366-701 3 / 182 6.2 Body-worn Position Conditions ............................................................................................... 30 6.3 Hotspot Mode Exposure Position Conditions .......................................................................... 31 7 MEASUREMENT PROCEDURE ......................................................................................................... 32 7.1 Measurement Process Diagram ............................................................................................. 32 7.2 SAR Scan General Requirement ............................................................................................ 33 7.3 Measurement Procedure ........................................................................................................ 34 7.4 Area & Zoom Scan Procedure ................................................................................................ 34 8 CONDUCTED RF OUPUT POWER .................................................................................................... 35 8.1 GSM ....................................................................................................................................... 35 8.2 WCDMA ................................................................................................................................. 36 8.3 LTE......................................................................................................................................... 37 8.4 WIFI ........................................................................................................................................ 45 8.5 Bluetooth ................................................................................................................................ 47 8.6 Power Reduction List .............................................................................................................. 48 9 TEST EXCLUSION CONSIDERATION ............................................................................................... 72 9.1 SAR Test Exclusion Consideration Table ............................................................................... 73 10 TEST RESULT ........................................................................................…

Text truncated - open the document above for the full version.

Report No.: BL-SZ19C0366-701 CALIBRATION REPORT F.1 E-Field Probe Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 F.2 Data Acquisition Electronics Report No.: BL-SZ19C0366-701 s Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 F.3 835 MHz Dipole Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 F.4 1750 MHz Dipole Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 F.5 1900 MHz Dipole Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 F.6 2450 MHz Dipole Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 F.7 2600 MHz Dipole Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701 Report No.: BL-SZ19C0366-701

2 / 21 1 GENERAL INFORMATION 1.1 Introduction This document contains a summary of the requirements set forth by the IEEE 1528, FCC KDB 865664 D01 for reference dipoles used for SAR measurement system validations. Instead of the typical annual calibration recommended by measurement standards, the reference dipoles were demonstrated that the SAR target, impedance and return loss have remain stable, so the longer calibration interval is acceptable. 1.2 General Description for Equipment under Test (EUT) EUT Type DASY 5 Reference Dipoles Manufacturer Speag Parameter EUT 1 EUT 2 EUT 3 EUT 4 EUT 5 EUT 6 EUT 7 Model D750V3 D835V2 D1750V2 D1900V2 D2450V2 D2600V2 D5GHzV2 Frequency 750 MHz 835 MHz 1750 MHz 1900 MHz 2450MHz 2600 MHz 5GHz-6GHz Serial Number SN 1055 SN 4d187 SN 1130 SN 5d193 SN 952 SN 1095 SN 1200 Product Condition (New/ Used) Used Used Used Used Used Used Used Last Cal. Date 2017/6/26 2017/6/26 2017/7/01 2017/6/30 2017/3/21 2017/7/10 2017/6/29 Current meas. Date 2019/6/11 2019/6/11 2019/6/12 2019/6/12 2019/3/12 2019/6/12 2019/6/13 3 / 21 1.3 EUT Photos D750V3 D835V2 D1750V2 D1900V2 4 / 21 D2600V2 D2450V2 D5GHzV2 5 / 21 2 DIPOLE IMPEDANCE AND RETURN LOSS The dipoles are designed to have low return loss when presented against a flat phantom at the specified distance. A Vector Network Analyser was used to perform a return loss measurement on the specific dipole when in the measurement location against the phantom and the distance was specified by the manufacturer with a special, low loss and low relative permittivity spacer. The impedance was measured at the SMA-connector with the network analyser. The measurement of verification with return loss should not deviate by more than 20% and minimum of 20 dB of the return loss, and the impedance (real or imaginary parts) should not deviate by more than 5 Ohms from the previous measurement using network analyzer. Note: The “Previous Meas.” in the following table refer to dipoles or other equivalent RF sources calibration reports. 6 / 21 2.1 D750V3 RETURN LOSS AND IMPEDANCE IN HEAD LIQUID Meas. Results Current Meas. Previous Meas. Max. Deviation Return Loss(dB) -31.226 -30.728 1.6% Impedance 53.093 Ω - 3.069 jΩ 52.793 Ω - 3.016 jΩ 0.3Ω (Real part) Return Loss Impedance 7 / 21 RETURN LOSS AND IMPEDANCE IN BODY LIQUID Meas. Results Current Meas. Previous Meas. Max. Deviation Return Loss(dB) -31.108 -30.881 0.7% Impedance 51.346 Ω - 3.056 jΩ 51.921 Ω - 3.131 jΩ -0.575Ω (Real part) Return Loss Impedance 8 / 21 2.2 D835V2 RETURN LOSS AND IMPEDANCE IN HEAD LIQUID Meas. Results Current Meas. Previous Meas. Max. Deviation Return Loss(dB) 28.299 -29.391 -3.715% Impedance 47.275Ω – 1.665 jΩ 48.614 Ω - 2.557 jΩ -1.339Ω (Real part) Return Loss Impedance -80 -70 -60 -50 -40 -30 -20 -10 0 0 1 Pwr -10 dBm Ch1Start635 MHzStop1.035 GHz Trc1S11dB Mag10 dB /Ref 0 dB Cal •1835.00000 MHz-28.299 dB S11 1 9 / 21 RETURN LOSS AND IMPEDANCE IN BODY LIQUID Meas. Results Current Meas. Previous Meas. Max. Deviation Return Loss(dB) -24.368 -25.430 -4.2% Impedance 47.851 Ω - 3.128 jΩ 46.544 Ω - 3.507 jΩ 1.307Ω (Real part) Return Loss Impedance -80 -70 -60 -50 -40 -30 -20 -10 0 0 1 Pwr -10 dBm Ch1Start635 MHzStop1.035 GHz Trc1S11dB Mag10 dB /Ref 0 dB Cal •1835.00000 MHz-24.368 dB S11 1 10 / 21 2.3 3.3 D1750V2 RETURN LOSS AND IMPEDANCE IN HEAD LIQUID Meas. Results Current Meas. Previous Meas. Max. Deviation Return Loss(dB) -35.282 -34.478 2.3% Impedance 46.850 Ω +0.273 jΩ 48.643 Ω - 1.407 jΩ -1.793Ω (Imaginary part) Return Loss Impedance -80 -70 -60 -50 -40 -30 -20 -10 0 0 1 Pwr -10 dBm Ch1Start1.55 GHzStop1.95 GHz Trc1S11dB Mag10 dB /Ref 0 dB Cal •11.750000 GHz-35.282 dB S11 1 11 / 21 RETURN LOSS AND IMPEDANCE IN BODY LIQUID Meas. Results Current Meas. Previous Meas. Max. Deviation Return Loss(dB) -28.005 -27.872 0.5% Impedance 48.868 Ω - 1.505 jΩ 46.763 Ω + 0.612 jΩ -2.117Ω (Real part) Return Loss Impedance 12 / 21 2.4 D1900V2 RETURN LOSS AND IMPEDANCE IN HEAD LIQUID Meas. Results Current Meas. Previous Meas. Max. Deviation Return Loss(dB) -26.058 -25.822 0.9% Impedance 46.629 Ω + 4.040 jΩ 48.893 Ω + 5.253 jΩ -2.264Ω (Real part) Return Loss Impedance -80 -70 -60 -50 -40 -30 -20 -10 0 0 1 Pwr -10 dBm Ch1Center1.9 GHzSpan400 MHz Trc1S11dB Mag10 dB /Ref 0 dB Cal •11.900000 GHz-26.058 dB S11 1 13 / 21 RETURN LOSS AND IMPEDANCE IN BODY LIQUID Meas. Results Current Meas. Previous Meas. Max. Deviation Return Loss(dB) -25.807 -24.513 5.3% Impedance 45.326 Ω + 4.648 jΩ 46.749 Ω + 4.221 jΩ -1.423Ω (Real part) Return Loss Impedance -80 -70 -60 -50 -40 -30 -20 -10 0 0 1 Pwr -10 dBm Ch1Center1.9 GHzSpan400 MHz Trc1S11dB Mag10 dB /Ref 0 dB Cal •11.900000 GHz-25.807 dB S11 1 14 / 21 2.5 D2450V2 RETURN LOSS AND IMPEDANCE IN HEAD LIQUID Meas. Results Current Meas. Previous Meas. Max. Deviation Return Loss(dB) -26.350 -28.271 -6.8% Impedance 46.7 Ω + 1.584 jΩ 49.7 Ω + 1.669 jΩ 3.011Ω (Real part) Return Loss Impedance 15 / 21 RETURN LOSS AND IMPEDANCE IN BODY LIQUID Meas. Results Current Meas. Previous Meas. Max. Deviation Return Loss (dB) -27.330 -27.205 -0.5% Impedance 46.3 Ω + 0.422 jΩ 46.8 Ω + 1.658 jΩ 1.236Ω (Imaginary part) Return Loss +Impedance -80 -70 -60 -50 -40 -30 -20 -10 0 0 1 Pwr -10 dBm Ch1Start2.25 GHzStop2.65 GHz Trc1S11dB Mag10 dB /Ref 0 dB Cal •12.450000 GHz-27.330 dB S11 1 16 / 21 2.6 D2600V2 RETURN LOSS AND IMPEDANCE IN HEAD LIQUID Meas. Results Current Meas. Previous Meas. Max. Deviation Return Loss(dB) -22.296 -22.192 0.5% Impedance 43.186 Ω -4.727 jΩ 46.754 Ω -7.288 jΩ -3.568Ω (Real part) Return Loss Impedance 17 / 21 RETURN LOSS AND IMPEDANCE IN BODY LIQUID Meas. Results Current Meas. Previous Meas. Max. Deviation Return Loss(dB) -22.987 -21.794 5.5% Impedance 41.679 Ω -4.509 jΩ 46.334 Ω -5.883 jΩ -4.655Ω (Real part) Return Loss Impedance -80 -70 -60 -50 -40 -30 -20 -10 0 0 1 Pwr -10 dBm Ch1Start2.4 GHzStop2.8 GHz Trc1S11dB Mag10 dB /Ref 0 dB Cal •12.600000 GHz-22.987 dB S11 1 18 / 21 2.7 D5GHzV2 RETURN LOSS AND IMPEDANCE IN HEAD LIQUID Meas. Results Current Meas. Prev…

Text truncated - open the document above for the full version.

Report No.: BL-SZ19C0366-602 2 / 66 Revision History Version Issue Date Revisions Content Rev. 01 Jan. 16, 2020 Initial Issue TABLE OF CONTENTS 1 ADMINISTRATIVE DATA (GENERAL INFORMATION) .......................................................................... 5 1.1 Identification of the Testing Laboratory ....................................................................................... 5 1.2 Identification of the Responsible Testing Location ...................................................................... 5 1.3 Laboratory Condition ................................................................................................................... 5 1.4 Announce .................................................................................................................................... 5 2 PRODUCT INFORMATION ...................................................................................................................... 6 2.1 Applicant Information ................................................................................................................... 6 2.2 Manufacturer Information ............................................................................................................ 6 2.3 Factory Information ..................................................................................................................... 6 2.4 General Description for Equipment under Test (EUT) ................................................................ 6 2.5 Technical Information .................................................................................................................. 7 2.6 Additional Instructions ................................................................................................................. 8 3 SUMMARY OF TEST RESULTS .............................................................................................................. 9 3.1 Test Standards ............................................................................................................................ 9 3.2 Verdict ......................................................................................................................................... 9 4 GENERAL TEST CONFIGURATIONS ................................................................................................... 10 4.1 Test Environments .................................................................................................................... 10 4.2 Test Equipment List ................................................................................................................... 10 4.3 Measurement Uncertainty ......................................................................................................... 11 4.4 Description of Test Setup .......................................................................................................... 12 4.4.1 For Antenna Port Test ............................................................................................................... 12 4.4.2 For AC Power Supply Port Test ................................................................................................ 1 2 4.4.3 For Radiated Test (Below 30 MHz) ........................................................................................... 13 4.4.4 For Radiated Test (30 MHz-1 GHz) .......................................................................................... 13 4.4.5 For Radiated Test (Above 1 GHz) ............................................................................................. 14 4.5 Measurement Results Explanation Example ............................................................................. 15 4.5.1 For conducted test items: .......................................................................................................... 15 Report No.: BL-SZ19C0366-602 3 / 66 4.5.2 For radiated band edges and spurious emission test: .............................................................…

Text truncated - open the document above for the full version.