2AUYFRMX3203Mobile Phone with GSM, WCDMA, LTE, Bluetooth and WiFi

RMX3203 This user manual provides the product safety information. Before using the phone, please read the Important Information Guide (IIG) carefully. You are provided with the following standard accessories: 1 Phone, 1 Charger, 1 USB data cable, 1 Safety Guide, 1 Quick Guide, 1 SIM Ejector Tool. Standard accessories RMX320 3 16.5cm(6.5'') SAR ValuesFCC SAR 0°C-35°C 4880mAh/18.88Wh(Min) 5000mAh/19.35Wh(Typ) 165.2×76.4×8.9mm 13 Megapixels +2 Megapixels +2 Megapixels Rear 5 Megapixels Front x.xxxW/kg(Head) x.xxxW/kg(Body) This guide will show you how to use the phone and its important functions. You may also visit realme ocial website to get more information about the phone. Greetings from realme mobile Do not place the phone or battery near or inside the heating equipments, cooking equipments, high pressure vessels (such as microwave ovens, induction cooker, electric oven, heater, pressure cooker, water heater, gas stove, etc.) to prevent the battery overheating which may lead to an explosion. The original charger, data cable and battery shall be used. Unapproved chargers, data cables, or batteries that are not certied by the manufacturer may result in electric shock, re, explosion, or other hazards. Back cover can’t be removed. When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with temperature ranging from 5°C~35°C. How to Transfer Old Mobile Content to a New Mobile You can use realme Clone Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one. 1. If you have an old Android phone, rst scan the QR code below, then download and install Clone Phone, next open Clone Phone on both the new and old phones, and follow the on-screen instructions to complete the operation. 2. If you have an old iPhone, open Clone Phone on the new phone directly, and follow on-screen instructions to sign in to iCloud account and sync the les. https://i.clonephone.coloros.com/download How to reboot the phone Press and hold the Power Button and Volume Up Button at the same time until the realme boot animation is displayed to reboot the phone. Bluetooth2.4-2.4835GHz7±2dBm(EIRP) 2.4G Wi-Fi2.4-2.4835GHz15±2dBm(EIRP) Radio Frequenc y Max . Output Pow er Radio Waves Specications 850MHz/900MHz32.5±0.8dBm 1800MHz/1900MHz29.5±0.8dBm GSM WCDMA LTE FDD Bands 38/41 23±0.8dBmLTE TDD Bands 1/2/423±0.8dBm Bands 5/823.2±0.8dBm Bands 1/2/3/4/6623±0.8dBm Bands 5/8/12/17/26/28 23.5±0.8dBm Band 722.7±0.8dBm Ambient Light Sensor Volume Key Front Camera Power Key Receiver 5212xxxV0.1 Accesorios incluidos 1 Teléfono, 1 Cargador, 1 Cable USB, 1 Guía de seguridad, 1 Guía rápida, 1 Herramienta de extracción de tarjeta SIM. Especificaciones técnicas Advertencia No coloque el teléfono o la batería cerca o dentro de equipos de calefacción, electrodomésticos (microondas, cocinas de cualquier tipo, hornos de cualquier tipo o calefactores etc.), menaje de cocina (ollas a presión etc.), para evitar que la batería se sobrecaliente y/o provoque daños en su dispositivo. Debe utilizar el cargador, cable y batería originales. Los cargadores, cables o baterías que no cuenten con la autorización y la certicación del fabricante pueden derivar en diversos problemas como; descargas elétricas, incendios, explosiones, daños en la batería u otros peligros. Al cargar el dispositivo, colóquelo en un entorno que tenga una temperatura ambiente y ventilación normales. Es recomendable que el dispositivo sea cargado en un entorno con una temperatura que oscile entre 5 °C y 35 °C. Cómo forzar el reinicio del teléfono Mantenga presionados los botones de Encendido y Vol (+) hasta que aparezca la animación de inicio de realme para forzar el renicio del teléfono. Cómo transferir contenido antiguo a su nuevo teléfono Puede utilizar la función de realme "Clonar Teléfono" para transferir rápidamente sus fotos, vídeos, música, contactos y aplicaciones a su nuevo teléfono desde el antiguo. Para ello, siga estos pasos: 1. Si tiene un teléfono Android, primero escanee el código QR que aparece a continuación, seguidamente descargue e instale “Clonar Teléfono”, abra la aplicación en ambos teléfonos y siga las instrucciones que aparecen en pantalla para completar la operación. 2. Si tiene un iPhone antiguo, abra “Clonar Teléfono” directamente en el nuevo teléfono y siga las instrucciones que aparecen en pantalla para iniciar sesión en la cuenta de iCloud y sincronizar los archivos. https://i.clonephone.coloros.com/download Bienvenido a realme mobile Esta guía le mostrará el uso del teléfono además de sus funciones más importantes. También, puede visitar nuestra página web ocial de realme donde obtendrá mayor información sobre el mismo. NOTA: La carcasa trasera no es extraible. 4880mAh/18,88Wh(Min) 5000mAh/19 ,35Wh(Typ) x,xxxW/kg(Cabeza) x,xxxW/kg(Cuerpo) FCC SAR RMX3203 165,2×76,4×8,9(mm) Batería Producto Dimensiones Valores SAR Tamaño de la pantalla 0°C-35°C Temperatura para el correcto funcionamiento 16,5cm(6,5 Pulgadas) Características Eléctricas Entrada 100-240Vca 50/60Hz 0,4A 5Vcc 2A Salida Especicación Eléctrica del terminal móvil 3 ,87 Vcc Cámara Cámara trasera de 13 Mpx + 2 Mpx + 2 Mpx Cámara delantera de 5 Mpx Regulación Pasos para buscar la Regulación FCC : Diríjase a Ajustes – Información del teléfono – Regulador. Para realizar la conguración inicial (al adquirir el dispositivo o realizar un reseteo de fábrica) es necesario conectarse a una red de datos (WiFi / Datos móviles). Si no se tiene disponible la red de datos, realice la conguración sin tarjeta SIM insertada. Bluetooth2,4-2,4835GHz7±2dBm(EIRP) 2,4G Wi-Fi2,4-2,4835GHz15±2dBm(EIRP) Radio FrecuenciaPotencia máx. de salida Especicaciones de ondas de radio 850MHz/900MHz32,5±0,8dBm 1800MHz/1900MHz29,5±0,8dBm GSM WCDMA LTE FDD Bands 38/41 23±0,8dBmLTE TDD Bands 1/2/423±0,8dBm Bands 5/823,2±0,8dBm Bands 1/2/3/4/6623±0,8dBm Bands 5/8…

Text truncated - open the document above for the full version.

Realme Chongqing Mobile Telecommunications Corp., Ltd. D ate: 2021-01-18 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 T o Whom It May Concern: The Realme Chongqing Mobile Telecommunications Corp., Ltd., the undersigned, hereby authorizes Miss. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Realme Chongqing Mobile Telecommunications Corp., Ltd. solely in matters relating to the application for an FCC equipment authorization for FCC ID:2AUYFRMX3203 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Realme Chongqing Mobile Telecommunications Corp., Ltd. in connection with the Application shall have the same effect as acts of the Realme Chongqing Mobile Telecommunications Corp., Ltd.. Realme Chongqing Mobile Telecommunications Corp., Ltd. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory: C ontact name: Yang LiangPing Title: Certification Manager Tel: 86 76986076999 Email: [email protected] Company name: Realme Chongqing Mobile Telecommunications Corp., Ltd.

Realme Chongqing Mobile Telecommunications Corp., Ltd. Date:2021-01-18 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: 2AUYFRMX3203 To Whom it may concern: Pursuant to sections 0.457 and 0.459 of Commission’s Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Realme Chongqing Mobile Telecommunications Corp., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA04-1705. This provision will give Realme Chongqing Mobile Telecommunications Corp., Ltd. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics 4 BOM 5 Tune up procedure SHORT-TERM 6 External Photos 7 Internal Photos 8 Te s t-Setup Photos 9 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory: Name:Yang LiangPing Company name:Realme Chongqing Mobile Telecommunications Corp., Ltd. Address:No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing,China Te l : 86 76986076999 Email: [email protected]

Declaration To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID: 2AUYFRMX3203 D on't operate on Channels 12 and 13. US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable S hould you have any questions, please feel free to contact me. Date:2021/01/18 Signature : (Yang LiangPing ) Title: Certification Manager Company name: Realme Chongqing Mobile Telecommunications Corp., Ltd.

FCC ID:2AUYFRMX3203 External Photos 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view 7. Accessories

label location

FCC ID:2AUYFRMX3203 Internal Photos 1. EUT uncover view 2. Antenna view MAIN Antenna Bluetooth/Wi-Fi/GPS Antenna LTE Diversity Antenna

NOTE: This document is issued by MORLAB, the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 127 REPORT No.：SZ20120363S01 TEST REPORT APPLICANT : Realme Chongqing Mobile Telecommunications Corp., Ltd. PRODUCT NAME : Mobile Phone MODEL NAME : RMX3203 BRAND NAME : realme FCC ID : 2AUYFRMX3203 STANDARD(S) : 47 CFR Part 2(2.1093) IEEE 1528-2013 RECEIPT DATE : 2021-01-04 TEST DATE : 2021-01-15 to 2021-01-25 ISSUE DATE : 2021-02-22 Edited by : Liang Yumei (Rapporteur) Approved by: Peng Huarui (Supervisor) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 127 REPORT No.：SZ20120363S01 DIRECTORY 1. SAR Results Summary ······································································································ 5 2. Technical Information ········································································································ 6 2.1. Applicant and Manufacturer Information ····································································· 6 2.2. Equipment under Test (EUT) Description ···································································· 6 2.3. Accessories Information ································································································ 7 2.4. Environment of Test Site/Conditions ············································································ 8 3. Specific Absorption Rate (SAR) ······················································································· 9 3.1. Introduction ······················································································································ 9 3.2. SAR Definition ·················································································································· 9 4. RF Exposure Limits·········································································································· 10 4.1. Uncontrolled Environment ··························································································· 10 4.2. Controlled Environment ······························································································· 10 5. Applied Reference Documents ······················································································· 11 6. SAR Measurement System ····························································································· 12 6.1. E-Field Probe ·················································································································· 13 6.2. Data Acquisition Electronics (DAE) ············································································ 14 6.3. Robot ······························································································································· 14 6.4. Measurement Server ····································································································· 15 6.5. Light Beam Unit ············································································································· 15 6.6. Phantom ·························································································································· 15 6.7. Device Holder ················································································································· 16 6.8. Data Storage and Evaluation ······················································································· 17 6.9. Test Equipment List ······································································································ 19 7. Tissue Simulating Liquids ······························································································ 21 8. SAR System Verification ································································································· 23 9. EUT Testing Position ······································································································· 26 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 127 REPORT No.：SZ20120363S01 10. Measurement Procedures ······························································································· 30 10.1. Spatial Peak SAR Evaluation ······················································································· 30 10.2 . Power Reference Measurement··················································································· 31 10.3. Area Scan Procedures ·································································································· 31 10.4. Zoom Scan Procedures ································································································ 31 10.5. SAR Averaged Methods ································································································ 32 10.6. Power Drift Monitoring ·································································································· 32 11. SAR Test Procedure ·····································································…

Text truncated - open the document above for the full version.

MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Te l : 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ20120363S01 Annex C Plots of System Performance Check Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2021.01.15 System Check_750MHz_Head Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 750 MHz; σ = 0.923 S/m; ε r = 42.15; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7515; ConvF(10.09, 10.09, 10.09); Calibrated: 2020.11.30; - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW 750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.19 W/kg CW 750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 49.15 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 2.98 W/kg SAR(1 g) = 2.03 W/kg; SAR(10 g) = 1.38 W/kg Maximum value of SAR (measured) = 2.20 W/kg 0 dB = 2.20 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2021.01.23 System Check_835MHz_Head Communication System: UID 0, CW (0); Frequency: 835 MHz;Duty Cycle: 1:1 Medium: HSL_835 Medium parameters used: f = 835 MHz; σ = 0.942 S/m; ε r = 42.87; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7515; ConvF(9.74, 9.74, 9.74); Calibrated: 2020.11.30; - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW835/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.63 W/kg CW835/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 48.58 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 3.04 W/kg SAR(1 g) = 2.42 W/kg; SAR(10 g) = 1.55 W/kg Maximum value of SAR (measured) = 2.62 W/kg 0 dB = 2.62 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2021.01.20 System Check_1750MHz_Head Communication System: UID 0, CW (0); Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: HSL_1750 Medium parameters used: f = 1750 MHz; σ = 1.378 S/m; ε r = 39.551; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN7515; ConvF(8.53, 8.53, 8.53); Calibrated: 2020.11.30; - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW1750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 9.85 W/kg CW1750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 80.49 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 15.2 W/kg SAR(1 g) = 9.46 W/kg; SAR(10 g) = 4.99 W/kg Maximum value of SAR (measured) = 9.89 W/kg 0 dB = 9.89 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2021.01.18 System Check_1900MHz_Head Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: HSL_1900 Medium parameters used: f = 1900 MHz; σ = 1.355 S/m; ε r = 39.743; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7515; ConvF(8.13, 8.13, 8.13); Calibrated: 2020.11.30; - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW1900/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 10.08 W/kg CW1900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 84.66 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 15.6 W/kg SAR(1 g) = 9.91 W/kg; SAR(10 g) = 5.12 W/kg Maximum value of SAR (measured) = 10.04 W/kg 0 dB = 10.04 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2021.01.25 System Check_2450MHz_Head Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450 Medium parameters used: f = 2450 MHz; σ = 1.819 S/m; ε r = 38.811; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.4 °C DASY5 Configuration: - Probe: EX3DV4 - SN3823; ConvF(7.3, 7.3, 7.3); Calibrated: 2020.01.03; - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW2450/Area Scan (101x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 16.3 W/kg CW2450/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 92.97 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 29.6 W/kg SAR(1 g) = 13.22 W/kg; SAR(10 g) = 6.06 W/kg Maximum value of SAR (measured) = 15.9 W/kg 0 dB = 15.9 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2021.01.22 System Check_2600MHz_Head Communication System: UID 0, CW (0); Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: HSL_2600 Medium parameters used: f = 2600 MHz; σ = 1.987 S/m; ε r = 38.296; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: EX3DV4 - SN7515;…

Text truncated - open the document above for the full version.

MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Te l : 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ20120363S01 Annex D Plots of Maximum SAR Test Results Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2021.01.23 GSM850_GPRS(4 TX slots)_Right Cheek _Ch189 Communication System: UID 0, GSM850(class 12) (0); Frequency: 836.4 MHz;Duty Cycle: 1:2.08 Medium: HSL_835 Medium parameters used: f = 836.4 MHz; σ = 0.943 S/m; ε r = 42.978; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7515; ConvF(9.74, 9.74, 9.74); Calibrated: 2020.11.30; - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch189/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.244 W/kg Ch189/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.755 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 0.292 W/kg SAR(1 g) = 0.234 W/kg; SAR(10 g) = 0.182 W/kg Maximum value of SAR (measured) = 0.244 W/kg 0 dB = 0.244 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2021.01.18 GSM1900_GPRS(4 TX slots)_Left Cheek _Ch661 Communication System: UID 0, PCS1900(class 12) (0); Frequency: 1880 MHz;Duty Cycle: 1:2.08 Medium: HSL_1900 Medium parameters used: f = 1880 MHz; σ = 1.321 S/m; ε r = 39.882; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7515; ConvF(8.13, 8.13, 8.13); Calibrated: 2020.11.30; - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch661/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0999 W/kg Ch661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.960 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.136 W/kg SAR(1 g) = 0.090 W/kg; SAR(10 g) = 0.059 W/kg Maximum value of SAR (measured) = 0.0946 W/kg 0 dB = 0.0946 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2021.01.18 WCDMA Band II_RMC 12.2Kbps_Right Cheek_Ch9538 Communication System: UID 0, UMTS-FDD (0); Frequency: 1907.6 MHz;Duty Cycle: 1:1 Medium: HSL_1900 Medium parameters used: f = 1908 MHz; σ = 1.32 S/m; ε r = 39.631; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7515; ConvF(8.13, 8.13, 8.13); Calibrated: 2020.11.30; - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch9538/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.103 W/kg Ch9538/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.561 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 0.125 W/kg SAR(1 g) = 0.086 W/kg; SAR(10 g) = 0.055 W/kg Maximum value of SAR (measured) = 0.0922 W/kg 0 dB = 0.0922 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2021.01.20 WCDMA Band IV_RMC 12.2Kbps_Right Cheek_Ch1513 Communication System: UID 0, UMTS-FDD (0); Frequency: 1752.6 MHz;Duty Cycle: 1:1 Medium: HSL_1750 Medium parameters used: f = 1753 MHz; σ = 1.454 S/m; ε r = 39.5; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN7515; ConvF(8.53, 8.53, 8.53); Calibrated: 2020.11.30; - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch1513/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.108 W/kg Ch1513/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.314 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.133 W/kg SAR(1 g) = 0.092 W/kg; SAR(10 g) = 0.059 W/kg Maximum value of SAR (measured) = 0.0987 W/kg 0 dB = 0.0987 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2021.01.23 WCDMA Band V_RMC 12.2Kbps_Right Cheek_Ch4233 Communication System: UID 0, UMTS-FDD (0); Frequency: 846.6 MHz;Duty Cycle: 1:1 Medium: HSL_835 Medium parameters used: f = 847 MHz; σ = 0.959 S/m; ε r = 43.168; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7515; ConvF(9.74, 9.74, 9.74); Calibrated: 2020.11.30; - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2020.06.02 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch4233/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.261 W/kg Ch4233/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.600 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.302 W/kg SAR(1 g) = 0.243 W/kg; SAR(10 g) = 0.189 W/kg Maximum value of SAR (measured) = 0.253 W/kg 0 dB = 0.253 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2021.01.18 LTE Band 2_20MHz_QPSK_1RB_49Offset_Right Cheek_Ch19100 Communication System: UID 0, LTE (0); Frequency: 1900 MHz;Duty…

Text truncated - open the document above for the full version.

MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Te l : 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ20120363S01 Annex E DASY Calibration Certificate

Add: No.5 1 Xueyuan Road, HaTel: +86-10-62304633-2079 dichna N CALIBRATION1In1` N411114 11191V CNAS L0570d' Fax '+86110-b23046002 04 China E-mail: cttlachinattl com http://www.chinattl.en C lient KEHU Certificate No: Z1860194 CAL-1Li1N CERTIFICATE Object D750V3-SN: 1173 Calibration Procedure(s) FF-Z11-003-01 Calibration Procedures for dipole validation kits Calibration date: June 21, 2018 This calibration Certificate documents the traceab ility to national standards, which real ize the physical un its of measurements(S I). The measurements and the uncertainties with confidence probabi-ity are g iven on the fo llowing pages and are part of the certificate. A ll cal ibrations have been conducted in the c losed laboratory facility: environment temperature(223)C and hum idity<70%. Cal ibration Equipment used (M&TE critica-for calibration) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Schedu ed Calibration Power Meter NRVD Power sensor NRV-Z5 Reference Probe EX3DV4 DAE4 Secondary Standards 102083 01-Nov-17 (CTTL, No.J17X08756) Oct-18 100542 01-Nov-17 (CTTL, No.J17X08756) Oct-18 SN 7464 12-Sep1 7(S PEAG, No. EX3-7464-Sep17) Sep-18 SN 1525 02ct-17(SPEAG,No.DAE4-1525ctl7) Oct-18 ID # Ca Date(Ca librated by, Certificate No.) Schedu ed Ca libration S igna l Generator E4438C NetworkAnalyzer E5071 C MY49071430 23-Jan-18 (CTTL, No.JI8X00560) Jan-19 MY46110673 24-Jan-18 (CTTL, No.J18X00561) Jan-19 Name Function . Signature Calibrated by Reviewed by Approved by Issued: June 26, 2018 Th is calibration certificate sha l l not be reproduced except in full without written appro…

Text truncated - open the document above for the full version.