2AUYFRMX3630Mobile Phone with GSM, WCDMA, LTE, NFC, WiFi and Bluetooth

This user manual provides the product safety information. Before using the phone, please read the Safety Guide carefully. Statement 'The Safety Guide' contains information regarding safety, operation and customer service. Before using the realme smartphone, please read all the instructions and the security information below, and keep it for backup. More detailed instructions are kept in this product as an electronic le. Please read the built-in instructions on the realme smartphone. For the latest information, please visit https://www.realme.com. Safety & security information Read all information before using the device to ensure safe and proper use. This mobile phone is suitable for working in an environment of 0°C to 35°C. Temperature for storage should be between -20°C and 45°C. Excessively high or low temperatures may damage the mobile phone or reduce the battery's lifespan. When charging, please keep the device in a well-ventilated area. Please charge this mobile phone in an environment between 5°C and 35°C. If the phone has a ash charging function, it may not be able to enter the ash charging mode when the temperature is below 15°C or over 35°C. Do not charge the battery over 12 hours. Do not replace, disassemble, modify, mechanically crush or cut the battery, as it may cause battery leakage, overheating, explosion or e. The adapter, as the disconnect device from the mains, shall be installed near the device and easily accessible. Use manufacturer-approved chargers, data cables, batteries and other accessories to prevent potential electric shock, re, explosion or other hazards. Back cover can't be removed. To prevent damage to your device's parts or internal circuits, do not use it in dusty, smoky, damp or dirty environments or near magnetic elds. Do not place the phone or battery directly in sunlight, near/inside sources of heat or in a low air pressure location, which may lead to an explosion or battery leakage. If any part of the product is cracked or damaged, discontinue use immediately and contact the realme Service Center. Power o your device in any area with a potentially explosive atmosphere, and comply with all signs and instructions. The battery can be charged and discharged hundreds of times at least, but it will eventually wear out. Precautions for using the device: Observe all safety instructions for any places, especially in hospital/health care facilities, service stations, schools, professional garages and in an aircraft. Do not use your device and adhere to all safety warnings/regulations regarding mobile device usage while driving. Persons with electronic implants (pacemakers, insulin pumps, neurostimulators, etc.) are recommended to place the mobile telephone 15 cm away from the implant or on the opposite side of the implant. To prevent hearing damage by high sound pressure, do not listen at high volume levels for long periods. Listening to a portable device at high volume may damage the user's ears and cause auditory disorders (temporary or permanent deafness, buzzing in the ears, tinnitus or hyperacusis). It is therefore strongly recommended not to use the portable device at full volume or more than one hour a day at medium volume. Recommendations for use: 1. No danger relating to the use of a mobile telephone has been observed and this is purely a preventive measure. The operating system of this product supports ocial system updates. If the user rooted the ROM system of any third party or modied the system le by cracking, it may lead to security risks of the system. realme will not provide any support nor take any responsibility for the nal use in these cases. To better understand how we protect your personal information, please see the privacy policy at realme ocial website. For more information, please check the User Guide on your device. All personal information may be removed during or after the product software upgrade. Please back up your personal information before upgrading. 2. To reduce the level of exposure to radiation, you should use the mobile telephone: A. In good reception conditions: when the signal indicator displays a full signal on the signal reception bar. B. With a hands-free kit or speaker. C. Giving priority to the use of data, SMS and MMS messages rather than calls. 3. Pregnant women should keep the mobile phone away from their abdomen and teenagers should keep the mobile phone away from their lower abdomen. 4. It is recommended to make reasonable use of the mobile phone by children and adolescents, for example by limiting the number of calls and their durations or by limiting the night use of the device. Do not leave your phone and its accessories within the reach of small children or allow them to play with it. They could hurt themselves or others, or may accidentally damage the phone. Your phone contains small parts with sharp edges that may cause an injury or which could become detached and create a choking hazard. Waste Electrical and Electronic Equipment (WEEE) realme Mobiles will seek shared responsibility and cooperation from customers in reducing the environmental impact of their products. realme Mobiles will comply with all the applicable laws related to WEEE management. This symbol (with or without a solid bar) means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, user has the choice to give his product to a competent recycling organization. Proper recycling of your product will protect human health and the environment. FCC Regulatory Conformance FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limi…

Text truncated - open the document above for the full version.

How to Transfer Old Mobile Content to a New Mobile You can use realme Clone Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one. 1. If you have an old Android phone, rst scan the QR code below, then download and install Clone Phone, next open Clone Phone on both the new and old phones, and follow the on-screen instructions to complete the operation. 2. If you have an old iPhone, open Clone Phone on the new phone directly, and follow on-screen instructions to sign in to iCloud account and sync the les. https://i.clonephone.coloros.com/download realme realme RMX3630 This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Regulations: Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. FCC Note: RF Exposure Information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 1.5 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone wi th all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AUYFRMX3630 For this device, the highest reported SAR value for usage against the head is 1.00 W/kg, for usage near the body is 0.83W/kg. While there may be dierences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of XX mm between the unit and the human body. Carry this device at least XX mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of XX mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and use such body-worn accessory should be avoided. Regulatory Steps to search E-label : Go to Settings -About Phone - Certicate Information. Accesorios incluidos 1 Teléfono, 1 Cargador, 1 Cable USB, 1 Guía de seguridad, 1 Guía rápida, 1 Herramienta de extracción Receptor de tarjeta SIM, 1 Funda protectora. Cómo forzar el reinicio del teléfono Mantenga presionados los botones de Encendido y Vol (+) hasta que aparezca la animación de inicio de realme para forzar el renicio del teléfono. Cómo transferir contenido antiguo a su nuevo teléfono Puede utilizar la función de realme "Clonar Teléfono" para transferir rápidamente sus fotos, vídeos, música, contactos y aplicaciones a su nuevo teléfono desde el antiguo. Para ello, siga estos pasos: 1. Si tiene un teléfono Android, primero escanee el código QR que aparece a continuación, seguidamente descargue e instale “Clonar Teléfono”, abra la aplicación en ambos teléfonos y siga las instrucciones que aparecen en pantalla para completar la operación. 2. Si tiene un iPhone antiguo, abra “Clonar Teléfono” directamente en el nuevo teléfono y siga las instrucciones que aparecen en pantalla para iniciar sesión en la cuenta de iCloud y sincronizar los archivos. https://i.clonephone.coloros.com/download Advertencia No coloque el teléfono o la batería cerca o dentro de equipos de calefacción, electrodomésticos (microondas, cocinas de cualquier tipo, hornos de cualquier tipo o calefactores etc.), menaje de coc…

Text truncated - open the document above for the full version.

RealmeChongqingMobileTelecommunicationsCorp.,Ltd. Long/Short-termConfidentialityRequest PHOENIXTESTLABGmbHDate:16September 2022 ProductCertification Königswinkel10 D32825Blomberg FCCID:2AUYFRMX3630 ToWhomItMayConcerns, Pursuanttosections0.457(d)and0.459ofCFR47andtoavoidprematurereleaseof sensitiveinformationpriortomarketingorreleaseoftheproducttothepublic,wehereby requestlong-termconfidentialtreatmentofinformationaccompanyingthisapplicationas outlinedbelow: ☒Schematics☒PartsList ☒BlockDiagram☒Tune-UpInfo ☒OperationalDescription Inadditionweherebyrequestthefollowingexhibitscontainedinthisapplicationtobe temporarily(short-termconfidentiality)withheldfromthepublicdisclosure ☒ foraninitialperiodof180days ☐ until: ☐ not applicable ☒ExternalPhotos☒TestSetupPhotos ☒InternalPhotos☒UsersManual Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesemattersmightbeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. Theapplicantunderstandsthatpursuanttorule0.457(d),disclosureofthisapplicationand allaccompanyingdocumentationwillnotbemadebeforethedateoftheGRANTforthis application. Ifyouhaveanyquestions,pleasefeelfreetocontactme. Yourssincerely, Signatory PrintedName:YangLiangping Position:ComplianceManager

RealmeChongqingMobileTelecommunicationsCorp.,Ltd. PHOENIXTESTLABGmbHDate:19September2022 ProductCertification Königswinkel10 D32825Blomberg RE:LETTEROFAGENCYAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeZhouFangaiatShenzhenAcademyofMetrologyand QualityInspectiontoactonourbehalfinallmattersrelatingtoapplicationforequipment authorization,includingthesigningofalldocumentsrelatingtothesematters. Wecertifythatwearenotsubjecttodenialoffederalbenefits,thatincludesFCCbenefits, pursuanttoSection5301oftheAnti-DrugAbuseACTof1988,U.S.C.862.Further,noparty, asdefinedin47CFR1.2002(b),totheapplicationissubjecttodenialoffederalbenefits,that includesFCCbenefits. Thisagreementisvalidforoneyear–until09-2023–untilfurthernotice. Ifyouhaveanyquestions,pleasefeelfreetocontactme Yourssincerely, Signatory PrintedName:YangLiangping Position:ComplianceManager

RealmeChongqingMobileTelecommunicationsCorp.,Ltd. UNIIDeclarationLetter WehavedeclaredbelowfeaturedforFCCequipmentauthorization,deviceFCCID:2AUYFRMX3630 (1)DFSDevice--Master,ClientwithRadardetectioncapability, Clientwithoutradardetectioncapability,N/A (2)Active/PassiveScanning,adhocmodeaccesspointcapability FrequencyBand (MHz) ActiveScanning (thedevicecan transmitaprobe (beacon)) passivescanning (wherethedevice is canlistenonly withno probes) AdHocMode capability Accesspoint capability 2412–2462MHzYes,NoYes,NoYes,NoYes,No 2422–2452MHzYes,NoYes,NoYes,NoYes,No 5745–5825MHzYes,NoYes,NoYes,NoYes,No 5755–5795MHzYes,NoYes,NoYes,NoYes,No 5180–5240MHzYes,NoYes,NoYes,NoYes,No 5190–5230MHzYes,NoYes,NoYes,NoYes,No 5260–5320MHzYes,NoYes,NoYes,NoYes,No 5270–5310MHzYes,NoYes,NoYes,NoYes,No 5500–5700MHzYes,NoYes,NoYes,NoYes,No 5510–5670MHzYes,NoYes,NoYes,NoYes,No (3)Countrycodeselectionability-Yes,No Ifno,plsexplainhowwasimplemented: Writethecountrycodeofthecorrespondingsalesregiondirectlythroughthesoftware (4)Meet15.202requirement-Yes,No, plscheckbelow: Amasterdeviceisdefinedasadeviceoperatinginamodeinwhichithasthecapabilityto transmitwithoutreceivinganenablingsignal.Inthismodeitisabletoselectachannelandinitiatea networkbysendingenablingsignalstootherdevices Aclientdeviceisdefinedasadeviceoperatinginamodeinwhichthetransmissionsofthedevice areundercontrolofthemaster.Adeviceinclientmodeisnotabletoinitiateanetwork. (5)Forclientdevicesthathavesoftwareconfigurationcontroltooperateindifferentmodes(active scanninginsomeandpassivescanninginothers)indifferentbands(deviceswithmultipleequipment classesorthosethatoperateonnon-DFSfrequencies)ormodulardeviceswhichconfigurethemodes ofoperationsthroughsoftware,theapplicationmustprovidesoftwareandoperationsdescriptionon howthesoftwareand/orhardwareisimplementedtoensurethatproperoperationsmodescannot bemodifiedbyenduseroraninstaller. Apply,NoApply, (Ifapply,plshelptoprovideexplanationonhowitwasimplement(Byhardwareorsoftware,andhowsoftwarewascontrolled) Ifyouhaveanyquestions,pleasefeelfreetocontactmeattheaddressshownbelow. Yourssincerely, Signatory PrintedName:YangLiangping Position:ComplianceManager

Photo 1 Appearance of EUT Photo 2 Appearance of EUT Photo 3 Appearance of EUT Photo 4 Appearance of EUT Photo 5 Appearance of EUT Photo 6 Appearance of EUT Photo 7 Appearance of Adapter (1#: VCB3HDUH) Photo 8 Appearance of Adapter (1#: VCB3HDUH) Photo 9 Appearance of Adapter (2#: VCB3HDUH) Photo 10 Appearance of Adapter (2#: VCB3HDUH) Photo 11 Appearance of Adapter (3#: VCB3HAUH) Photo 12 Appearance of Adapter (3#: VCB3HAUH) Photo 13 Appearance of Adapter (4#: VCB3HDUH) Photo 14 Appearance of Adapter (4#: VCB3HDUH) Photo 15 Appearance of USB Cable (DL150) Photo 16 Appearance of USB Cable (DL143) Photo 17 Appearance of Earphone

IMEI2: xxxxxxxxxxxxxxxx IMEI1: xxxxxxxxxxxxxxxx S/N: xxxxxxxx Model: RMX3630Mobile Phone Designed by realmeAssembled in China Realme Chongqing Mobile Telecommunications Corp., Ltd. FCC ID: 2AUYFRMX3630

Photo 1 Inside of EUT GSM/WCDMA/LTE Ant2 BT/WiFi Antenna GSM/WCDMA/LTE Ant3 NFC Antenna GPS Antenna Photo 2 Inside of EUT Photo 3 Inside of EUT Photo 4 Inside of EUT Photo 5 Inside of EUT Photo 6 Inside of EUT Photo 7 Inside of EUT Photo 8 Inside of EUT Photo 9 Inside of EUT Photo 10 Inside of EUT Photo 11 Inside of EUT Photo 12 Inside of EUT Photo 13 Inside of EUT

ReportNo.:WT228002146Page1of10 APPENDIXA:SYSTEMCHECKINGSCANS ReportNo.:WT228002146Page2of10 Date/Time:2022/09/05 Dipole750V2 CommunicationSystem:UID0,GenericGSM;CommunicationSystemBand:GSM750(747.0-763.0 MHz);Frequency:755MHz;CommunicationSystemPAR:9.191dB;PMF:2.88104 Mediumparametersused(interpolated):f=755MHz;σ=0.91S/m;ε r =41.99;ρ=1000kg/m 3 Phantomsection:FlatSection MeasurementStandard:DASY5(IEEE/IEC/ANSIC63.19-2007) DASYConfiguration: Probe:EX3DV4-SN7623;ConvF(10.28,10.28,10.28)@755MHz;Calibrated:2022-01-24 Sensor-Surface:4mm(MechanicalSurfaceDetection),z=1.0,31.0 Electronics:DAE4Sn1636;Calibrated:2021-12-30 Phantom:SAM3;Type:QD000P41AA; DASY5252.10.4(1527);SEMCADX14.6.14(7483) Configuration/Dipole750MHz2/AreaScan(61x131x1):Interpolatedgrid:dx=1.500mm,dy=1.500mm ReferenceValue=58.27V/m;PowerDrift=0.01dB FastSAR:SAR(1g)=2.30W/kg;SAR(10g)=1.52W/kg MaximumvalueofSAR(interpolated)=2.98W/kg Configuration/Dipole750MHz2/ZoomScan(5x5x7)/Cube0:Measurementgrid:dx=8mm,dy=8mm, dz=5mm ReferenceValue=58.27V/m;PowerDrift=0.01dB PeakSAR(extrapolated)=3.21W/kg SAR(1g)=2.20W/kg;SAR(10g)=1.45W/kg Smallestdistancefrompeakstoallpoints3dBbelow=23.0mm RatioofSARatM2toSARatM1=62.2% MaximumvalueofSAR(measured)=2.82W/kg 0dB=2.98W/kg=4.50dBW/kg ReportNo.:WT228002146Page3of10 Date/Time:2022/09/06 Dipole835V2 CommunicationSystem:UID0,CW;CommunicationSystemBand:D835(835.0MHz);Frequency:835 MHz;CommunicationSystemPAR:0dB;PMF:1 Mediumparametersused:f=835MHz;σ=0.90S/m;εr=41.28;ρ=1000kg/m3 Phantomsection:FlatSection MeasurementStandard:DASY5(IEEE/IEC/ANSIC63.19-2007) DASYConfiguration: Probe:EX3DV4–SN7623;ConvF(9.90,9.90,9.90)@835MHz;Calibrated:2022-01-24 Sensor-Surface:4mm(MechanicalSurfaceDetection),z=1.0,31.0 Electronics:DAE4Sn1636;Calibrated:2021-12-30 Phantom:SAM3;Type:QD000P41AA; DASY5252.10.4(1527);SEMCADX14.6.14(7483) Head/Dipole835/AreaScan(61x131x1):Interpolatedgrid:dx=1.500mm,dy=1.500mm ReferenceValue=58.74V/m;PowerDrift=-0.16dB FastSAR:SAR(1g)=2.37W/kg;SAR(10g)=1.52W/kg MaximumvalueofSAR(interpolated)=3.09W/kg Head/Dipole835/ZoomScan(5x5x7)/Cube0:Measurementgrid:dx=8mm,dy=8mm,dz=5mm ReferenceValue=58.74V/m;PowerDrift=-0.16dB PeakSAR(extrapolated)=3.54W/kg SAR(1g)=2.26W/kg;SAR(10g)=1.50W/kg Smallestdistancefrompeakstoallpoints3dBbelow=17.5mm RatioofSARatM2toSARatM1=65.0% MaximumvalueofSAR(measured)=2.88W/kg 0dB=3.09W/kg=4.52dBW/kg ReportNo.:WT228002146Page4of10 Date/Time:2022/09/08 Dipole1750V2 CommunicationSystem:CW;CommunicationSystemBand:D1750(1750.0MHz);Frequency:1750 MHz;DutyCycle:1:1 Mediumparametersused:f=1750MHz;σ=1.39S/m;εr=40.69;ρ=1000kg/m3 Phantomsection:FlatSection MeasurementStandard:DASY5(IEEE/IEC/ANSIC63.19-2007) DASYConfiguration: Probe:EX3DV4-SN7623;ConvF(8.50,8.50,8.50)@1750MHz;Calibrated:2022-01-24 Sensor-Surface:4mm(MechanicalSurfaceDetection),z=1.0,31.0 Electronics:DAE4Sn1636;Calibrated:2021-12-30 Phantom:SAM3;Type:QD000P41AA; DASY5252.10.4(1527);SEMCADX14.6.14(7483) Head/Dipole1800/AreaScan(61x131x1):Interpolatedgrid:dx=1.500mm,dy=1.500mm ReferenceValue=100.25V/m;PowerDrift=-0.17dB FastSAR:SAR(1g)=9.16W/g;SAR(10g)=4.83W/g MaximumvalueofSAR(interpolated)=11.4W/kg Head/Dipole1800/ZoomScan(5x5x7)/Cube0:Measurementgrid:dx=8mm,dy=8mm,dz=5mm ReferenceValue=100.25V/m;PowerDrift=-0.17dB PeakSAR(extrapolated)=17.0W/g SAR(1g)=9.05W/g;SAR(10g)=4.79W/g Smallestdistancefrompeakstoallpoints3dBbelow=9.9mm RatioofSARatM2toSARatM1=52.8% MaximumvalueofSAR(measured)=11.2W/kg 0dB=11.4W/kg=9.21dBW/kg ReportNo.:WT228002146Page5of10 Date/Time:2022/09/10 Dipole1900V2 CommunicationSystem:UID0,CW;CommunicationSystemBand:D1900(1900.0MHz);Frequency: 1900MHz;CommunicationSystemPAR:0dB;PMF:1 Mediumparametersused:f=1900MHz;σ=1.35S/m;ε r =40.25;ρ=1000kg/m 3 Phantomsection:FlatSection MeasurementStandard:DASY5(IEEE/IEC/ANSIC63.19-2007) DASYConfiguration: Probe:EX3DV4-SN7623;ConvF(8.28,8.28,8.28)@1900MHz;Calibrated:2022-01-24 Sensor-Surface:4mm(MechanicalSurfaceDetection),z=1.0,31.0 Electronics:DAE4Sn1636;Calibrated:2021-12-30 Phantom:SAM3;Type:QD000P41AA; DASY5252.10.4(1527);SEMCADX14.6.14(7483) Head/Dipole1900/AreaScan(61x61x1):Interpolatedgrid:dx=1.500mm,dy=1.500mm ReferenceValue=103.6V/m;PowerDrift=0.12dB FastSAR:SAR(1g)=9.88W/kg;SAR(10g)=5.04W/kg MaximumvalueofSAR(interpolated)=12.5W/kg Head/Dipole1900/ZoomScan(5x5x7)/Cube0:Measurementgrid:dx=8mm,dy=8mm,dz=5mm ReferenceValue=103.6V/m;PowerDrift=0.12dB PeakSAR(extrapolated)=19.1W/kg SAR(1g)=9.82W/kg;SAR(10g)=5.02W/kg Smallestdistancefrompeakstoallpoints3dBbelow=10.1mm RatioofSARatM2toSARatM1=50.2% MaximumvalueofSAR(measured)=12.5W/kg 0dB=12.5W/kg=9.48dBW/kg ReportNo.:WT228002146Page6of10 Date/Time:2022/09/12 Dipole2450V2 CommunicationSystem:UID0,CW;CommunicationSystemBand:D2450(2450.0MHz);Frequency: 2450MHz;CommunicationSystemPAR:0dB;PMF:1 Mediumparametersused:f=2450MHz;σ=1.85S/m;ε r =39.94;ρ=1000kg/m 3 Phantomsection:FlatSection MeasurementStandard:DASY5(IEEE/IEC/ANSIC63.19-2007) DASYConfiguration: Probe:EX3DV4-SN7623;ConvF(7.75,7.75,7.75)@2450MHz;Calibrated:2022-01-24 Sensor-Surface:4mm(MechanicalSurfaceDetection),z=1.0,31.0 Electronics:DAE4Sn1636;Calibrated:2021-12-30 Phantom:SAM3;Type:QD000P41AA; DASY5252.10.4(1527);SEMCADX14.6.14(7483) Head/Dipole2450/AreaScan(61x61x1):Interpolatedgrid:dx=1.500mm,dy=1.500mm ReferenceValue=107.9V/m;PowerDrift=0.01dB FastSAR:SAR(1g)=13.0W/kg;SAR(10g)=5.91W/kg MaximumvalueofSAR(interpolated)=16.2W/kg Head/Dipole2450/ZoomScan(5x5x7)/Cube0:Measurementgrid:dx=8mm,dy=8mm,dz=5mm ReferenceValue=107.9V/m;PowerDrift=0.01dB PeakSAR(extrapolated)=27.3W/kg SAR(1g)=12.8W/kg;SAR(10g)=5.91W/kg Smallestdistancefrompeakstoallpoints3dBbelow=9.0mm RatioofSARatM2toSARatM1=45.3% MaximumvalueofSAR(measured)=16.2W/kg 0dB=16.2W/kg=9.91dBW/kg ReportNo.:WT228002146Page7of10 Date/Time:2022/09/13 Dipole2600V2 CommunicationSystem:UID0,CW;CommunicationSystemBand:D2600(2600.0MHz);Frequency: 2600MHz;CommunicationSystemPAR:0dB;PMF:1 Mediumparametersused:f=2600MHz;σ=1.94S/m;ε r =39.54;ρ=1000kg/m 3 Phantomsection:FlatSection Measuremen…

Text truncated - open the document above for the full version.

ReportNo.:WT228002146Page 1 of 109 AppendixB.MEASUREMENTSCANS ReportNo.:WT228002146Page 2 of 109 Date/Time:2022-09-06 GSM850HeadRightTiltedMid CommunicationSystem:UID10001,GenericGSM;CommunicationSystemBand:GSM850(824.0- 849.0MHz);Frequency:836.6MHz;CommunicationSystemPAR:9.191dB;PMF:2.88104 Mediumparametersused(interpolated):f=836.6MHz;σ=0.899S/m;ε r =41.325;ρ=1000kg/m 3 Phantomsection:RightSection MeasurementStandard:DASY5(IEEE/IEC/ANSIC63.19-2007) DASYConfiguration:  Probe:EX3DV4-SN7623;ConvF(9.52,9.52,9.52)@836.6MHz;Calibrated:2022-01-24  Sensor-Surface:4mm(MechanicalSurfaceDetection),z=1.0,31.0 Electronics:DAE4Sn1636;Calibrated:2021-12-30 Phantom:SAM3;Type:QD000P41AA; DASY5252.10.4(1527);SEMCADX14.6.14(7483) GSM850_RightTilt/Mid/AreaScan(61x61x1):Interpolatedgrid:dx=1.500mm,dy=1.500mm ReferenceValue=1.56V/m;PowerDrift=-0.03dB FastSAR:SAR(1g)=0.226W/kg;SAR(10g)=0.115W/kg MaximumvalueofSAR(interpolated)=0.272W/kg GSM850_RightTilt/Mid/ZoomScan(5x5x7)/Cube0:Measurementgrid:dx=8mm,dy=8mm, dz=5mm ReferenceValue=1.56V/m;PowerDrift=-0.03dB PeakSAR(extrapolated)=0.467W/kg SAR(1g)=0.190W/kg;SAR(10g)=0.094W/kg Smallestdistancefrompeakstoallpoints3dBbelow=8.9mm RatioofSARatM2toSARatM1=66.8% MaximumvalueofSAR(measured)=0.246W/kg 0dB=0.272W/kg=-16.84dBW/kg ReportNo.:WT228002146Page 3 of 109 Date/Time:2022-09-06 GSM850BodyTopMid10mm CommunicationSystem:UID10001,GenericGSM;CommunicationSystemBand:GSM850(824.0- 849.0MHz);Frequency:836.6MHz;CommunicationSystemPAR:9.191dB;PMF:2.88104 Mediumparametersused(interpolated):f=836.6MHz;σ=0.899S/m;ε r =41.325;ρ=1000kg/m 3 Phantomsection:FlatSection MeasurementStandard:DASY5(IEEE/IEC/ANSIC63.19-2007) DASYConfiguration:  Probe:EX3DV4-SN7623;ConvF(9.52,9.52,9.52)@836.6MHz;Calibrated:2022-01-24  Sensor-Surface:4mm(MechanicalSurfaceDetection),z=1.0,31.0 Electronics:DAE4Sn1636;Calibrated:2021-12-30 Phantom:SAM3;Type:QD000P41AA; DASY5252.10.4(1527);SEMCADX14.6.14(7483) GSM850_Front/TopMid/AreaScan(61x61x1):Interpolatedgrid:dx=1.500mm,dy=1.500mm ReferenceValue=1.19V/m;PowerDrift=-0.02dB FastSAR:SAR(1g)=0.127W/kg;SAR(10g)=0.068W/kg MaximumvalueofSAR(interpolated)=0.159W/kg GSM850_Front/TopMid/ZoomScan(5x5x7)/Cube0:Measurementgrid:dx=8mm,dy=8mm, dz=5mm ReferenceValue=1.19V/m;PowerDrift=-0.02dB PeakSAR(extrapolated)=0.268W/kg SAR(1g)=0.094W/kg;SAR(10g)=0.048W/kg Smallestdistancefrompeakstoallpoints3dBbelow=7.5mm RatioofSARatM2toSARatM1=47.8% MaximumvalueofSAR(measured)=0.135W/kg 0dB=0.159W/kg=-18.29dBW/kg ReportNo.:WT228002146Page 4 of 109 Date/Time:2022-09-06 GSM850BodyFacedownLow15mm CommunicationSystem:UID10001,GenericGSM;CommunicationSystemBand:GSM850(824.0- 849.0MHz);Frequency:824.2MHz;CommunicationSystemPAR:9.191dB;PMF:2.88104 Mediumparametersused(interpolated):f=824.2MHz;σ=0.899S/m;ε r =41.325;ρ=1000kg/m 3 Phantomsection:FlatSection MeasurementStandard:DASY5(IEEE/IEC/ANSIC63.19-2007) DASYConfiguration:  Probe:EX3DV4-SN7623;ConvF(9.52,9.52,9.52)@824.2MHz;Calibrated:2022-01-24  Sensor-Surface:4mm(MechanicalSurfaceDetection),z=1.0,31.0 Electronics:DAE4Sn1636;Calibrated:2021-12-30 Phantom:SAM3;Type:QD000P41AA; DASY5252.10.4(1527);SEMCADX14.6.14(7483) GSM850_Front/FacedownLow/AreaScan(61x61x1):Interpolatedgrid:dx=1.500mm,dy=1.500 mm ReferenceValue=1.39V/m;PowerDrift=-0.09dB FastSAR:SAR(1g)=0.149W/kg;SAR(10g)=0.076W/kg MaximumvalueofSAR(interpolated)=0.173W/kg GSM850_Front/FacedownLow/ZoomScan(5x5x7)/Cube0:Measurementgrid:dx=8mm, dy=8mm,dz=5mm ReferenceValue=1.39V/m;PowerDrift=-0.09dB PeakSAR(extrapolated)=0.318W/kg SAR(1g)=0.126W/kg;SAR(10g)=0.058W/kg Smallestdistancefrompeakstoallpoints3dBbelow=7.3mm RatioofSARatM2toSARatM1=45.3% MaximumvalueofSAR(measured)=0.151W/kg 0dB=0.173W/kg=-14.29dBW/kg ReportNo.:WT228002146Page 5 of 109 Date/Time:2022-09-10 GSM1900HeadRightTiltedMid CommunicationSystem:UID10001,GenericGSM;CommunicationSystemBand:PCS1900(1850.0 -1910.0MHz);Frequency:1880MHz;CommunicationSystemPAR:9.191dB;PMF:2.88104 Mediumparametersused:f=1909.8MHz;σ=1.42S/m;ε r =39.87;ρ=1000kg/m 3 Phantomsection:RightSection MeasurementStandard:DASY5(IEEE/IEC/ANSIC63.19-2007) DASYConfiguration:  Probe:EX3DV4-SN7623;ConvF(7.99,7.99,7.99)@1880MHz;Calibrated:2022-01-24  Sensor-Surface:4mm(MechanicalSurfaceDetection),z=1.0,31.0 Electronics:DAE4Sn1636;Calibrated:2021-12-30 Phantom:SAM4;Type:QD000P40CC; DASY5252.10.4(1527);SEMCADX14.6.14(7483) 1900_RightGSMHead/1900GSMTilted-Mid/AreaScan(61x61x1):Interpolatedgrid:dx=1.500 mm,dy=1.500mm ReferenceValue=2.59V/m;PowerDrift=-0.05dB FastSAR:SAR(1g)=0.243W/kg;SAR(10g)=0.124W/kg MaximumvalueofSAR(interpolated)=0.296W/kg 1900_RightGSMHead/1900GSMTilted-Mid/ZoomScan(5x5x7)/Cube0:Measurementgrid: dx=8mm,dy=8mm,dz=5mm ReferenceValue=2.59V/m;PowerDrift=-0.05dB PeakSAR(extrapolated)=0.519W/kg SAR(1g)=0.208W/kg;SAR(10g)=0.101W/kg Smallestdistancefrompeakstoallpoints3dBbelow=6.6mm RatioofSARatM2toSARatM1=52.2% MaximumvalueofSAR(measured)=0.238W/kg 0dB=0.296W/kg=-9.29dBW/kg ReportNo.:WT228002146Page 6 of 109 Date/Time:2022-09-10 GSM1900BodyFacedownMid10mm CommunicationSystem:UID10001,GenericGSM;CommunicationSystemBand:PCS1900(1850.0 -1910.0MHz);Frequency:1880MHz;CommunicationSystemPAR:9.191dB;PMF:2.88104 Mediumparametersused:f=1909.8MHz;σ=1.42S/m;ε r =39.87;ρ=1000kg/m 3 Phantomsection:FlatSection MeasurementStandard:DASY5(IEEE/IEC/ANSIC63.19-2007) DASYConfiguration:  Probe:EX3DV4-SN7623;ConvF(7.99,7.99,7.99)@1880MHz;Calibrated:2022-01-24  Sensor-Surface:4mm(MechanicalSurfaceDetection),z=1.0,31.0 Electronics:DAE4Sn1636;Calibrated:2021-12-30 Phantom:SAM4;Type:QD000P40CC; DASY5252.10.4(1527);SEMCADX14.6.14(7483) 1900_GSM1900/GSM1900TopMid5mm/AreaScan(61x61x1):Interpolatedgrid:dx=1.500mm, dy=1.500mm ReferenceValue=2.19V/m;PowerDrift=-0.07dB FastSAR:SAR(1g)=0.147W/kg;SAR(10g)=0.083W/kg MaximumvalueofSAR(interpolated)=0.188W/kg 1900_GSM1900/GSM1900TopMid5mm/ZoomScan(5x5x7)/Cube0:Measurementgrid: dx=8mm,dy=8mm,dz=5mm ReferenceValue=2.19V/m;PowerDrift=-0.07dB PeakSAR(extrapolated)=0.315W/kg SAR(1g)=0.106W/kg;SAR(10g)=0.059W/kg Smal…

Text truncated - open the document above for the full version.

ReportNo.:WT228002146Page1of27 APPENDIXC:RELEVANTPAGESFROMPROBE CALIBRATIONREPORT(S) ReportNo.:WT228002146Page2of27 ReportNo.:WT228002146Page3of27 ReportNo.:WT228002146Page4of27 ReportNo.:WT228002146Page5of27 ReportNo.:WT228002146Page6of27 ReportNo.:WT228002146Page7of27 ReportNo.:WT228002146Page8of27 ReportNo.:WT228002146Page9of27 ReportNo.:WT228002146Page10of27 ReportNo.:WT228002146Page11of27 ReportNo.:WT228002146Page12of27 ReportNo.:WT228002146Page13of27 ReportNo.:WT228002146Pa…

Text truncated - open the document above for the full version.