2AUYFRMX3890Mobile Phone with GSM, WCDMA, LTE, Bluetooth, WIFI and NFC

RMX3890 Greetings from realme mobile This guide briey show you how to use the phone and its important functions. For more and detailed information of the phone and user guidance, please visit: www.realme.com/eu/support. Warning Do not place the phone or battery near or inside heating equipment, cooking equipments, high pressure vessels (such as microwave ovens, induction cooker, electric oven, heater, pressure cooker, water heater, gas stove, etc.) to prevent the battery overheating which may lead to an explosion. Back cover can’t be removed. The original charger, data cable and battery shall be used. Unapproved chargers, data cables, or batteries that are not certied by the manufacturer may result in electric shock, re, explosion, or other hazards. Основная 8 108+2 RMX3890 164,65×75,4×7,69(мм) 17,06 см (6,72”) 4880мАч/18,98Втч(Min) 5000мАч/19,45Втч(Typ) realme Благодарим за выбор смартфона realme В данном руководстве пользователя описаны наиболее важные функции смартфона. Это может привести к перегреву и взрыву аккумулятора. Динамик Кнопка регулировки громкости Фронтальная камера Датчик приближения & световой датчик Кнопка питания / Сканер отпечатков пальцев, интегрированный в кнопку питания Radio Waves SpecificationsSpecification CE SARSAR Values 0°C-35°C RMX3890 164.65×75.4×7.69(mm) 4880mAh/18.98Wh(Min) 5000mAh/19.45Wh(Typ) 17.06cm(6.72'') 108Megapixels+2Megapixels Rear 8Megapixels Front Product Main screen parameter Dimension Battery Camera Operating temperature 2.0W/kg(Head) 2.0 W/kg(Body) Receiver Volume Key Front Camera Power Key / Fingerprint Scanner Proximity sensor & light sensor Как перенести информацию из памяти старого телефона на новый телефон? Для переноса изображений, видео, музыки, контактов, сообщений, приложений и других данных со старого телефона на новый Вы можете воспользоваться функцией realme «Создать копию телефона». 1. Если на Вашем старом телефоне установлена операционная система Android, отсканируйте этим телефоном QR-код, приведённый ниже, и установите приложение «Копия телефона». Затем откройте приложение «Копия телефона» на старом и новом телефонах и следуйте подсказкам на экране. 2. Для переноса данных с iPhone откройте «Копия телефона» на новом телефоне и следуйте подсказкам на экране для входа в свой аккаунт iCloud и синхронизации файлов. https://i.clonephone.coloros.com/download Одновременно зажмите и удерживайте кнопки питания и увеличения громкости (+) до появления загрузочного окна realme. Комплектация В комплект входят: телефон–1 шт., зарядное устройство–1 шт., USB-кабель–1 шт., Руководство по безопасности–1 шт., Краткое руководство пользователя–1 шт., инструмент для извлечения SIM-карты–1 шт., защитный чехол–1 шт. How to Transfer Old Mobile Content to a New Mobile You can use realme Clone Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one. 1. If you have an old Android phone, rst scan the QR code below, then download and install Clone Phone, next open Clone Phone on both the new and old phones, and follow the on-screen instructions to complete the operation. 2. If you have an old iPhone, open Clone Phone on the new phone directly, and follow on-screen instructions to sign in to iCloud account and sync the les. https://i.clonephone.coloros.com/download realme Radio Frequency Max. Output Power 850MHz33.5dBm 900MHz33.7dBm 1800MHz30.5dBm 1900MHz30.5dBm Bands 1/5/824.5dBm Bands 2/424dBm Bands 124.2dBm Bands 3/6624dBm Band 2/4/723.5dBm Bands 5 24.5dBm Bands 8/13/2024.5dBm Bands 2824.8dBm LTE TDD Bands 38/40/4124dBm Bluetooth2.4-2.4835GHz11.15dBm(EIRP) 2.4G Wi-Fi2.4-2.4835GHz17.15dBm(EIRP) 5.15-5.25GHz18.7dBm(EIRP) 5.25~5.35GHz19dBm(EIRP) 5.47-5.725GHz19dBm(EIRP) 5.725-5.85GHz14dBm(EIRP) NFC13.56MHz42dBuA/m @10m 5G Wi-Fi GSM WCDMA LTE FDD 850MHz33.5dBm 900MHz33.7dBm 1800MHz30.5dBm 1900MHz30.5dBm Bands 1/5/824.5dBm Bands 2/424dBm Bands 124.2dBm Bands 3/6624dBm Band 2/4/723.5dBm Bands 5 24.5dBm Bands 8/13/2024.5dBm Bands 2824.8dBm LTE TDD Bands 38/40/4124dBm Bluetooth2.4-2.4835GHz11.15dBm(EIRP) 2.4G Wi-Fi 2.4-2.4835GHz17.15dBm(EIRP) 5.15-5.25GHz18.7dBm(EIRP) 5.25~5.35GHz19dBm(EIRP) 5.47-5.725GHz19dBm(EIRP) 5.725-5.85GHz14dBm(EIRP) NFC13.56MHz42dBuA/m @10m 5G Wi-Fi GSM WCDMA LTE FDD This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o‡ and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit di‡erent from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Regulations: FCC Note: Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. RF Exposure Information (SAR) This phone is designed and manufacture d not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Realme Chongqing Mobile Telecommunications Corp., Ltd. No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10-11-2023 Ref: Attestation Statements Par t 2.911(d)(5)(i) Filing FCC ID: 2AUYFRMX3890 Realme Chongqing Mobile Telecommunications Corp., Ltd.certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Contact Person: Yang LiangPing Rev 1/26/2023 Realme Chongqing Mobile Telecommunications Corp., Ltd. No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10-11-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AUYFRMX3890 Realme Chongqing Mobile Telecommunications Corp., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Contact Person: Yang LiangPing

realme U .S. Agent Designation for Service of Process TO:Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Innopeak Technology, Inc. FRN ： 0033456872 Contact Name: Richard Wahng Physical U.S. address: 2479 E Bayshore Rd #120, Palo Alto, CA 94303 Email: [email protected] This letter is to confirm that weInnopeak Technology, Inc.have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of theApplicantnoted below. U.S. Agent Signature: Date:February 15, 2023 Signed by (Printed Name/Title):Richard Wahng /General Counsel The applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Realme Chongqing Mobile Telecommunications Corp., Ltd. Grantee Code: 2AUYF Contact Name: Yang Liangping Address: No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing, P.R. China. Email: [email protected] Applicant Signature: Date:February 15, 2023 Signed by (Printed Name/Title):Yang Liangping / Compliance Manager

Realme Chongqing Mobile Telecommunications Corp., Ltd. No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing, China Date: November 13, 2023 Power of Attorney To whom i t may concern, Please be notified that I, Yang Liangping, have designated Samuel Peng in Shenzhen Balun Technology Co., Ltd. as the person being responsible for this project and to sign the form 731 and other documentation. Any and a ll acts carried out by Samuel Peng in Shenzhen Balun Technology Co., Ltd. on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C 862. This authorization is limited to the product of as following: FCC ID: 2AUYFRMX3890 If you have any acknowledgement and response, please send it to Shenzhen Balun Technology Co., Ltd. directly. Should you have any questions or comments regarding this matter, please have my best attention. Since rely yours, ____ Contact Person: Yang LiangPing

Re alme Chongqing Mobile Telecommunications Corp., Ltd. No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing, China To : Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 RE: Rea lme Chongqing Mobile Telecommunications Corp., Ltd. FCC ID: 2 AU YFRMX3890 FCC Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. Rea lme Chongqing Mobile Telecommunications Corp., Ltd. requests that the following documents regarding this submission for FCC ID: 2AU YFRMX3890 be kept Long-Te r m confidential: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operational Description Operational Description.pdf Part list BOM.pdf Tune-Up-Procedure Tune up procedure.pdf And below exhibit kept short-term confidential (180 days): Exhibit Type File Name E x ternal Photos External Photos .p df In ternal Photos Internal Photos .p df Te st Setup Photos Test Setup Photos .pdf U se rs Manuals Users Manual .pdf Tho se documents contain detailed system and equipment description and related information about the product which R e alme Chongqing Mobile Telecommunications Corp., Ltd. considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Real me Chongqing Mobile Telecommunications Corp., Ltd. considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Tha nk you for your attention to this matter. Yours Sincerely,Name of the Manager: Name: Yang Liangping Date: 2023/10/30 Signature:

Realme Chongqing Mobile Telecommunications Corp., Ltd. No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing, China Statement We, Realme Chongqing Mobile Telecommunications Corp., Ltd., states that our device: FCC ID: 2AUYFRMX3890 The hardware supports LTE band40 but it will be disabled by software and are not available in US market. Contact Person: Yang LiangPing

Realme Chongqing Mobile Telecommunications Corp., Ltd. UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: 2AUYFRMX3890, (1) DFS Device --Master, Client with Radar detection capability , Client without radar detection capability, N/A (2) Act ive / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412 – 2462 MHz Yes, No Yes, No Yes, No Yes, No 5150 – 5250 MHz Yes, No Yes, No Yes, No Yes, No 5250 – 5350 MHz Yes, No Yes, No Yes, No Yes, No 5470 – 5725 MHz Yes, No Yes, No Yes, No Yes, No 5725 – 5850 MHz Yes, No Yes, No Yes, No Yes, No (3) Country code selection ability - Yes , No If no, pls explain how was implemented : use Microsoft network utility (4) Meet 15.202 requirement -Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For c lient devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The active or passive mode was controlled by software. For non-DFS frequency used active scanning, for DFS frequency was switched to passive scanning by software Mechanism If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Sig natory Contact Person: Yang Liangping

Report No.: BL-SZ23A0041-AW 1 / 8 ANNEX C EUT EXTERNAL PHOTOS FRONT VIEW OF EUT REAR VIEW OF EUT Report No.: BL-SZ23A0041-AW 2 / 8 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: BL-SZ23A0041-AW 3 / 8 TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: BL-SZ23A0041-AW 4 / 8 Accessory- Power Supply Unit 1(VCB3HDUH Golden Lake) CLOSE-UP Report No.: BL-SZ23A0041-AW 5 / 8 Accessory-Power Supply Unit 2 (VCB3JFUH Golden Lake) CLOSE-UP Report No.: BL-SZ23A0041-AW 6 / 8 Accessory-Power Supply Unit 3 (VCB3HDUH Huntkey) CLOSE-UP Report No.: BL-SZ23A0041-AW 7 / 8 Accessory-Power Supply Unit 4 (VCB3JFUH Chenyang) CLOSE-UP Report No.: BL-SZ23A0041-AW 8 / 8 Accessory- USB Cable --BLANK BELOW--

Realme Chongqing Mobile Telecommunications Corp., Ltd. ADDRESS: No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing, China Date: 2023/11/9 Product Equality Declaration We, Realme Chongqing Mobile Telecommunications Corp., Ltd.. declare on our sole responsibility for the product of FCC ID：2AUYFRMX3890, as below: We hav e Physical label and e-label on the product, we have the certain step: Settings-About Phone - Regulatory, and this step instruct in the user manual too. And we declared that we have programmed the e-label in the device and it is not able to be modified by any third party, the user will be able to access this information without a SIM card, special accessories or supplemental plug-ins. Sincerely yours Contact Person:Yang LiangPing COMPANY: Realme Chongqing Mobile Telecommunications Corp., Ltd.

Report No.: BL-SZ23A0041-AI 1 / 7 ANNEX D EUT INTERNAL PHOTOS EUT UNCOVER VIEW 1 EUT UNCOVER VIEW 2 Antenna 1 GSM850/1900, WCDMA 2/4/5 LTE Band 2/4/5/7/13/38/41/66 Antenna 3 Bluetooth, WIFI 2.4G/5G Antenna 0 GSM850/1900 WCDMA 2/4/5 LTE Band 2/4/517/13/38/41/66 Report No.: BL-SZ23A0041-AI 2 / 7 EUT UNCOVER VIEW 3 EUT UNCOVER VIEW 4 Report No.: BL-SZ23A0041-AI 3 / 7 EUT UNCOVER VIEW 5 EUT UNCOVER VIEW 6 Report No.: BL-SZ23A0041-AI 4 / 7 MAIN BOARD TOP VIEW (WITH SHIELDING) MAIN BOARD TOP VIEW (WITHOUT SHIELDING) Report No.: BL-SZ23A0041-AI 5 / 7 MAIN BOARD REAR VIEW (WITH SHIELDING) MAIN BOARD REAR VIEW (WITHOUT SHIELDING) Report No.: BL-SZ23A0041-AI 6 / 7 SECONDARY BOARD 1 TOP VIEW SECONDARY BOARD 1 REAR VIEW Report No.: BL-SZ23A0041-AI 7 / 7 BATTERY TOP VIEW BATTERY REAR VIEW --BLANK BELOW--

Report No.: BL-SZ23A0041-401 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 33 Web: www.titcgroup.com Template No.: TRP-FCC 15B (2023-07-01) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Realme Chongqing Mobile Telecommunications Corp., Ltd. Address: No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing, China Equipment Type: Mobile Phone Model Name: RMX3890 Brand Name: realme FCC ID: 2AUYFRMX3890 Test Standard: 47 CFR Part 15 Subpart B ANSI C63.4-2014 Sample Arrival Date: Oct. 07, 2023 Test Date: Oct. 12, 2023 - Oct. 20, 2023 Date of Issue: Nov. 09, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Xin Liao Checked by: Xia Long Approved by: Liao Jianming (Technical Director) _______________ _______________ _______________ Report No.: BL-SZ23A0041-401 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 33 Web: www.titcgroup.com Template No.: TRP-FCC 15B (2023-07-01) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Nov. 09, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ............................................................................................................ 3 1.1 Test Laboratory ....................................................................................................................... 3 1.2 Test Location ........................................................................................................................... 3 2 PRODUCT INFORMATION ........................................................................................................... 4 2.1 Applicant Information ............................................................................................................... 4 2.2 Manufacturer Information ........................................................................................................ 4 2.3 General Description for Equipment under Test (EUT).............................................................. 4 2.4 Ancillary Equipment ................................................................................................................. 4 2.5 Technical Information .............................................................................................................. 5 3 SUMMARY OF TEST RESULTS ................................................................................................... 6 3.1 Test Standards ........................................................................................................................ 6 3.2 Verdict ..................................................................................................................................... 6 3.3 Test Uncertainty ...................................................................................................................... 6 4 GENERAL TEST CONFIGURATIONS ........................................................................................... 7 4.1 Test Enclosure List .................................................................................................................. 7 4.2 Test Configurations ................................................................................................................. 7 4.3 Test Setups ............................................................................................................................. 8 5 TEST ITEMS ................................................................................................................................ 10 5.1 Emission Tests ...................................................................................................................... 10 ANNEX A TEST RESULTS ............................................................................................................. 14 A.1 Radiated Emission ................................................................................................................ 14 A.2 Conducted Emission, AC Ports ............................................................................................. 25 ANNEX B TEST SETUP PHOTOS ................................................................................................. 32 ANNEX C EUT EXTERNAL PHOTOS ............................................................................................ 32 ANNEX D EUT INTERNAL PHOTOS ............................................................................................. 32 Report No.: BL-SZ23A0041-401 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 33 Web: www.titcgroup.com Template No.: TRP-FCC 15B (2023-07-01) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Accreditation Certificate The laboratory is a testing organization accredited by FCC as a accredited testing laboratory. The designation number is CN1196. Report No.: BL-SZ23A0041-401 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 33 Web: www.titcgroup.com Template No.: TRP-FCC 15B (2023-07-01) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. Ch…

Text truncated - open the document above for the full version.

Report No.: BL-SZ23A0041-AE-1 1 / 5 ANNEX B TEST SETUP PHOTOS 1 Radiated Emission Test Mode 1 Below 1 GHz Close-up Photo Report No.: BL-SZ23A0041-AE-1 2 / 5 Above 1 GHz Test Mode 4 Below 1 GHz Report No.: BL-SZ23A0041-AE-1 3 / 5 Close-up Photo Above 1 GHz Report No.: BL-SZ23A0041-AE-1 4 / 5 2 Conducted Emission, AC Ports Test Mode 1 Report No.: BL-SZ23A0041-AE-1 5 / 5 Test Mode 4 --BLANK BELOW--

Report No.: BL-SZ23A0041-AE-2 1 / 3 ANNEX B TEST SETUP PHOTOS 1 Radiated Test 9 kHz-30 MHz Close-up Photo Report No.: BL-SZ23A0041-AE-2 2 / 3 Below 1 GHz 2 Conducted Emission Report No.: BL-SZ23A0041-AE-2 3 / 3 --BLANK BELOW--