2AV4OZENLETCOIL4000ZENLET COIL

ZENLET Coil Series ZENLET Coil ZENLET CoilA USB-C Charging Cable C Aroma Stones D Magnetic Gel Pad B ZENLET Coil 1 PRODUCT OVERVIEW 2 STATUS INDICATOR •The power indicator lights when the power button is turned on. Power Capacity Indicator (Standby / Wired Output) 0~20% Red LED 21~80% Yellow LED 81~100% Green LED Power Capacity Indicator (Wireless Output) 0~20% Purple LED 21~80% White LED 81~100% Green LED 3 INSTRUCTIONS •Self Charging Connect ZENLET Coil with the power by the included USB-C cable to start charging. •Wireless Charging When connected to power via USB-C cable, there is no need to push any buttons to turn on the power as ZENLET Coil will self-start and will charge your device wirelessly if placed on top of ZENLET Coil. When ZENLET Coil is not connected to power via USB-C cable, it is necessary to turn on the power and press the power button to start charging your device wirelessly. 3 INSTRUCTIONS •Wired Charging Connect ZENLET Coil and your device with a suitable Type-C cable (Type-C to Lightning / Type-C to Type-C / Type-C to micro USB). After that, turn on the power to start the wired charging. •Synchronized Charging ZENLET Coil is capable of wired & wireless charging synchronously. Your device No.1, placed on ZENLET Coil, is charged wirelessly with the output from the battery of ZENLET Coil while your device No.2 is charged with a suitable Type-C cable (Type-C to Lightening / Type-C to Type-C / Type-C to micro USB). 12 3 INSTRUCTIONS •Installation and Removal of Aroma Stones Installation of Aroma Stones 1 Swivel clockwise to turn open the top cover of ZENLET Coil. 2 Place the Aroma Stones onto two hollows on the middle plate. The Aroma Stones will then be stabilized by the magnetic attraction. 21 3 INSTRUCTIONS •Installation and Removal of Aoma Stones Removal of Aroma Stones 1 Swivel clockwise to turn open the top cover of ZENLET Coil. 2 Pick up the Aroma Stone with a regular magnet or the Magnetic Bar included in the Aroma Tool Kit. 3 INSTRUCTIONS •Refill and Change of the Essential Oil Refill of essential oil 1 Swivel clockwise to turn open the top cover of ZENLET Coil. 2 Pour 1 drop of essential oil to each of the aroma stones. Wait until the oil is fully absorbed before you put the cover back to Coil. 2 1 ＊ If the essential oil cannot be fully absorbed by the Aroma Stone, it is probably because the essential oil on the stone is not fully evaporated. If that is the case, wait and refill the essential oil until it is evaporated completely. 12 3 INSTRUCTIONS •Refill and Change of the Essential Oil Change of essential oil on the Aroma Stone 1 Remove the Aroma Stones from two hollows of the middle plate of ZENLET Coil. 2 Soak them in the clean water for 2 to 3 hours. After the stones are being cleaned and laid dry completely, pour 1 drop of the new essential oil onto each of the Aroma Stones. 3 INSTRUCTIONS •How to clean the middle plate? The top cover and middle plate are connected by the magnetic attraction. Simply pull out the top cover and dab the middle plate with the cotton pad and alcohol. Please dont clean the middle plate with water. 4 SPECIFICATIONS Battery : Rechargeable lithium ion battery Battery Capacity : 4000mAh Input : 5V / 3A, 9V / 2A (USB-C. Adapter agreeable with QC or PD.) Output : 1 Wireless Output ． 5W (Qi Standard 5W compatible) ． 7.5W (iPhone. Adapter agreeable with QC or PD.) ． 10W (Android. Adapter agreeable with QC or PD.) 2 Wired Output (USB-C) ． Used alone : 5V / 2A device ． Used when charging wirelessly : 5V / 1A / device 3 Sleep Mode / Power Re-starting ． ZENLET Coil will be power off and go into sleep mode after stop charging either wireless or with wire for 30 seconds. ． 2 ways to re-start the power : (a) Provide power to ZENLET Coil via USB cable. USB input : 5V / 3A , 9V / 2A (Adapter agreeable with QC or PD.) (b) Turn on ZENLET Coil again. Recommended Transmission Distance : ≦ 5 mm Working Temperature Range : 20°C ~ 45°C Protection Mechanism : Foreign object detection (FOD) and monitoring of temperature, voltage, current, power, and short circuit. Dimensions : W63.5 × H100 × D9.5 mm Weight : 85g Materials : Aircraft grade aluminum alloy 6061 and PC Colors : Silver / Rose Gold / Space Grey Origin : Designed and manufactured in Taiwan ．Before using ZENLET Coil, make sure if your device is Qi wireless charging enabled. If your device is not Qi wireless charging enabled, please use ZENLET Coil with the USB included. ．ZENLET Coil contains one lithium battery and must be carried in carry-on baggage only, according to the international aviation safety regulation. ．Be sure to center your device on ZENLET Coil to achieve the most effective wireless charging as the performance will be affected if your device is not placed in the middle of ZENLET Coil. ．Remove all sorts of IC cards from your device before it is placed in the middle of ZENLET Coil to prevent the cards from getting demagnetized. 5 NOTES ．Before using ZENLET Coil, make sure if your device is Qi wireless charging enabled. If your device is not Qi wireless charging enabled, please use ZENLET Coil with the USB included. ．ZENLET Coil contains one lithium battery and must be carried in carry-on baggage only, according to the international aviation safety regulation. ．Be sure to center your device on ZENLET Coil to achieve the most effective wireless charging as the performance will be affected if your device is not placed in the middle of ZENLET Coil. ．Remove all sorts of IC cards from your device before it is placed in the middle of ZENLET Coil to prevent the cards from getting demagnetized. ．Use ZENLET Coil with caution to prevent it from falling or colliding with other objects to avoid the possible damages. ．It is normal the battery inside ZENLET Coil will self-discharge when sitting unused. If necessary, re-charge the battery before you use ZENLET Coil. ．Keep ZENLET Coil away from water, fire, and constantly keep it dry to prevent the possible damage or product malfunction. ．Keep ZE…

Text truncated - open the document above for the full version.

Date: June 4, 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: declaration of composite/rated equipment for FCC ID: 2AV4OZENLETCOIL4000 To Whom it may concern, We, the undersigned, would like to declare that the composite portion catagorized as All other devices has been authorized under the Supplier's Declaration of Conformity (SDoC) procedures. Sincerely, Applicant : ZENLET CO.,LTD. Address : 2F., No.45, Ln. 150,Sec. 1, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) Signature : _________________________________ Name and Job Title. : YUEH YIN HSIEH, Company Owner E-mail : [email protected] Tel. : 886-2-8791-6946

Letter of Authorization Date: June 4, 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: 2AV4OZENLETCOIL4000 Product Name: ZENLET COIL To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization to the FCC Rules and Regulations. Sporton International Inc. Address : No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Name : Leo Huang Job Title : Manager e-mail : [email protected] We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant : ZENLET CO.,LTD. Address : 2F., No.45, Ln. 150,Sec. 1, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) Signature : _________________________________ Name and Job Title. : YUEH YIN HSIEH, Company Owner E-mail : [email protected] Tel. : 886-2-8791-6946

Confidentiality Request Letter Date: June 4, 2020 Federal Communications Commission Authorization and Evaluation Division Subject: Request for confidentiality FCC ID: 2AV4OZENLETCOIL4000 To whom it may concern: Short-term Confidentiality pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. §2.803 and the importation rules in 47 C.F.R. §2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we are request the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 45 days after the grant date. 1. Internal Photographs 2. External Photographs 3. User’s manual 4. Test Set up photos Permanent Confidentiality Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. 1. Block Diagram 2. Schematics 3. Operational Description It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely, Applicant : ZENLET CO.,LTD. Address : 2F., No.45, Ln. 150,Sec. 1, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) Signature : _________________________________ Name and Job Title. : YUEH YIN HSIEH, Company Owner E-mail : [email protected] Tel. : 886-2-8791-6946

Photographs of EUT Report No. : EP050802 SPORTON International Inc. Page No. : 1 of 12 TEL : 886-3-327-3456 EP Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Photographs of EUT Report No. : EP050802 SPORTON International Inc. Page No. : 2 of 12 TEL : 886-3-327-3456 EP Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Photographs of EUT Report No. : EP050802 SPORTON International Inc. Page No. : 3 of 12 TEL : 886-3-327-3456 EP Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Photographs of EUT Report No. : EP050802 SPORTON International Inc. Page No. : 12 of 12 TEL : 886-3-327-3456 EP Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 ─────THE END────

Photographs of EUT Report No. : EP050802 SPORTON International Inc. Page No. : 4 of 12 TEL : 886-3-327-3456 EP Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Photographs of EUT Report No. : EP050802 SPORTON International Inc. Page No. : 5 of 12 TEL : 886-3-327-3456 EP Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Photographs of EUT Report No. : EP050802 SPORTON International Inc. Page No. : 6 of 12 TEL : 886-3-327-3456 EP Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Photographs of EUT Report No. : EP050802 SPORTON International Inc. Page No. : 7 of 12 TEL : 886-3-327-3456 EP Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Photographs of EUT Report No. : EP050802 SPORTON International Inc. Page No. : 8 of 12 TEL : 886-3-327-3456 EP Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Photographs of EUT Report No. : EP050802 SPORTON International Inc. Page No. : 9 of 12 TEL : 886-3-327-3456 EP Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Photographs of EUT Report No. : EP050802 SPORTON International Inc. Page No. : 10 of 12 TEL : 886-3-327-3456 EP Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Photographs of EUT Report No. : EP050802 SPORTON International Inc. Page No. : 11 of 12 TEL : 886-3-327-3456 EP Report Version : Rev. 01 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020

Maximum Permissible Exposure Report No. : FA050802 TEL : 886-3-327-3456 Page Number : 1 of 10 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Report Template No.: HE1-A2 Ver2.2 Report Version : 01 FCC ID: 2AV4OZENLETCOIL4000 Maximum Permissible Exposure (Nerve Stimulation) FCC ID : 2AV4OZENLETCOIL4000 Equipment : ZENLET COIL Brand Name : Zenlet Model Name : ZENLET COIL Applicant : ZENLET CO.,LTD. 2F., No.45, Ln. 150,Sec. 1, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) Manufacturer : Powergene Technology Co., Ltd. Taiwan Branch 1F-5, No.1, Wuquan 1st Rd., Xinzhuang Dist., New Taipei City, Taiwan Standard : 47 CFR Part 2.1091 The product was received on May 08, 2020, and testing was started from May 14, 2020 and completed on May 16, 2020. We, SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in KDB680106 D01 RF Exposure Wireless Charging Apps v03 and shown compliance with the applicable technical standards. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of United States government. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. ___________________________________________ Approved by: Allen Lin __________________________________________ SDoC by: XXXXX SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Maximum Permissible Exposure Report No. : FA050802 TEL : 886-3-327-3456 Page Number : 2 of 10 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Report Template No.: HE1-A2 Ver2.2 Report Version : 01 FCC ID: 2AV4OZENLETCOIL4000 Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 1 HUMAN EXPOSURE ASSESSMENT ................................................................................................... 5 1.1 Maximum Permissible Exposure ............................................................................................................ 5 1.2 Testing Applied Standards ..................................................................................................................... 5 1.3 Testing Location Information .................................................................................................................. 6 1.4 Support Equipment ................................................................................................................................. 6 1.5 The Worst Condition ............................................................................................................................... 7 2 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................ 10 APPENDIX A. TEST PHOTOS PHOTOGRAPHS OF EUT V01 Maximum Permissible Exposure Report No. : FA050802 TEL : 886-3-327-3456 Page Number : 3 of 10 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Report Template No.: HE1-A2 Ver2.2 Report Version : 01 FCC ID: 2AV4OZENLETCOIL4000 History of this test report Report No. Version Description Issued Date FA050802 01 Initial issue of report Jun. 17, 2020 Maximum Permissible Exposure Report No. : FA050802 TEL : 886-3-327-3456 Page Number : 4 of 10 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Report Template No.: HE1-A2 Ver2.2 Report Version : 01 FCC ID: 2AV4OZENLETCOIL4000 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 1.5 - Maximum Permissible Exposure PASS - Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: None. Reviewed by: Sam Tsai Report Producer: Debby Hung Maximum Permissible Exposure Report No. : FA050802 TEL : 886-3-327-3456 Page Number : 5 of 10 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Report Template No.: HE1-A2 Ver2.2 Report Version : 01 FCC ID: 2AV4OZENLETCOIL4000 1 Human Exposure Assessment 1.1 Maximum Permissible Exposure 1.1.1 Limit of Maximum Permissible Exposure Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f 2 )* 6 30-300 61.4 0.163 1.0 6 300-1500 - - F/300 6 1500-100,000 - - 5 6 Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 - - F/1500 30 1500-100,000 - - 1.0 30 Note 1: f = frequency in MHz ; *Plane-wave equivalent power density Note 2: For the applicable limit, see FCC 1.1310 1.2 Testing Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  47 CFR Part 2.1091 The following reference test guidance is not within the scope of accreditation of TAF:  KDB680106 D01 RF Exposure Wireless Charging Apps v03 Maximum Permissible Exposure Report No. : FA050802 TEL : 886-3-327-3456 Page Number : 6 of 10 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Report Template No.: HE1-A2 Ver2.2 Report Version : 01 FCC ID: 2AV4OZENLETCOIL4000 1.3 Testing Location Information Testing Location HWA YA ADD : No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 FAX : 886-3-327-0973 Test site Designation No. TW1190 with FC…

Text truncated - open the document above for the full version.

FCC TEST REPORT Report No. : FR050802AW TEL : 886-3-327-3456 Page Number : 1 of 30 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Report Template No.: HE1-C5 Ver2.5 Report Version : 01 FCC ID: 2AV4OZENLETCOIL4000 FCC TEST REPORT FCC ID : 2AV4OZENLETCOIL4000 Equipment : ZENLET COIL Brand Name : Zenlet Model Name : ZENLET COIL Applicant : ZENLET CO.,LTD. 2F., No.45, Ln. 150,Sec. 1, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) Manufacturer : Powergene Technology Co., Ltd. Taiwan Branch 1F-5, No.1, Wuquan 1st Rd., Xinzhuang Dist., New Taipei City, Taiwan Standard : 47 CFR FCC Part 15.209 The product was received on May 08, 2020, and testing was started from May 14, 2020 and completed on May 16, 2020. We, SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10-2013 and shown compliance with the applicable technical standards. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of government. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. ___________________________________________ Approved by: Allen Lin SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) FCC TEST REPORT Report No. : FR050802AW TEL : 886-3-327-3456 Page Number : 2 of 30 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Report Template No.: HE1-C5 Ver2.5 Report Version : 01 FCC ID: 2AV4OZENLETCOIL4000 Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Testing Applied Standards ..................................................................................................................... 6 1.3 Testing Location Information .................................................................................................................. 6 1.4 Measurement Uncertainty ...................................................................................................................... 7 2 TEST CONFIGURATION OF EUT......................................................................................................... 8 2.1 Test Condition ........................................................................................................................................ 8 2.2 The Worst Case Configuration ............................................................................................................... 8 2.3 The Worst Case Measurement Configuration ........................................................................................ 8 2.4 Support Equipment ................................................................................................................................. 9 2.5 Test Setup Diagram ............................................................................................................................. 10 3 TRANSMITTER TEST RESULT .......................................................................................................... 12 3.1 AC Power-line Conducted Emissions .................................................................................................. 12 3.2 Transmitter Radiated Emissions .......................................................................................................... 18 3.3 Emission Bandwidth ............................................................................................................................. 28 4 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................ 30 APPENDIX A. TEST PHOTOS PHOTOGRAPHS OF EUT V01 FCC TEST REPORT Report No. : FR050802AW TEL : 886-3-327-3456 Page Number : 3 of 30 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Report Template No.: HE1-C5 Ver2.5 Report Version : 01 FCC ID: 2AV4OZENLETCOIL4000 History of this test report Report No. Version Description Issued Date FR050802AW 01 Initial issue of report Jun. 17, 2020 FCC TEST REPORT Report No. : FR050802AW TEL : 886-3-327-3456 Page Number : 4 of 30 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Report Template No.: HE1-C5 Ver2.5 Report Version : 01 FCC ID: 2AV4OZENLETCOIL4000 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 1.1.2 15.203 Antenna Requirement PASS - 3.1 15.207 AC Power-line Conducted Emissions PASS - 3.2 15.209 Transmitter Radiated Emissions PASS - 3.3 15.215(c) Emission Bandwidth PASS - Reviewed by: Sam Tsai Report Producer: Debby Hung Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: None. FCC TEST REPORT Report No. : FR050802AW TEL : 886-3-327-3456 Page Number : 5 of 30 FAX : 886-3-327-0973 Issued Date : Jun. 17, 2020 Report Template No.: HE1-C5 Ver2.5 Report Version : 01 FCC ID: 2AV4OZENLETCOIL4000 1 General Description 1.1 Information 1.1.1 General Information Wireless Power Transfer General Information Frequency Range Modulation Mode Charging Freq. (kHz) Field Strength (dBuV/m) 112-205 kHz ASK 127.642 57.76 Power Transfer Method Outpu…

Text truncated - open the document above for the full version.

FCC TEST REPORT Report No. : FR050802AW SPORTON INTERNATIONAL INC. Page No. : A1 of A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973 Appendix A. Test Photos 1. Photographs of Conducted Emissions Test Configuration Mode 1 Front view Rear view FCC TEST REPORT Report No. : FR050802AW SPORTON INTERNATIONAL INC. Page No. : A2 of A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973 Under table view FCC TEST REPORT Report No. : FR050802AW SPORTON INTERNATIONAL INC. Page No. : A3 of A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973 Mode 2 Front view Rear view FCC TEST REPORT Report No. : FR050802AW SPORTON INTERNATIONAL INC. Page No. : A4 of A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973 Under table view FCC TEST REPORT Report No. : FR050802AW SPORTON INTERNATIONAL INC. Page No. : A5 of A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973 2. Photographs of Radiated Emissions Test Configuration For radiated emissions 9kHz~30MHz Front view Rear view FCC TEST REPORT Report No. : FR050802AW SPORTON INTERNATIONAL INC. Page No. : A6 of A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973 For radiated emissions 30MHz~1GHz Mode 1 Front view Rear view FCC TEST REPORT Report No. : FR050802AW SPORTON INTERNATIONAL INC. Page No. : A7 of A7 TEL : 886-3-327-3456 FAX : 886-3-327-0973 Mode 2 Front view Rear view ─────THE END─────

Maximum Permissible Exposure Report No. : FA050802 TEL : 886-3-327-3456 Page Number : A1 of A2 FAX : 886-3-327-0973 Appendix A. Test Photos ─────THE END────