2AV6B-IP4MCBPTWi-Fi PT Camera

Quick Start Guide ATTENTION! For returns or support, you MUST contact DefenderCameras.com/Support ACTIVATE YOUR WARRANTY PROTECT Covered for the unexpected SUPPORT Receive videos, tips & updates for your product VALUE Exclusive access WRVSHFLDOR΍HUV Open your camera & scan this QR code, or visit: DefenderCameras.com/Warranty NEED HELP? DefenderCameras.com/Support Open your camera & scan this QR code for access to the Defender Guard PRO PTZ Support Center 4 WHAT’S INCLUDEDWHAT YOU’LL NEED REGULATORY INFORMATION Guard Pro PTZ Camera with pre-installed 32GB SD Card Camera Power Supply (10 ft) Camera Power Extension Cable (25 ft) Ethernet Waterproof Cable Shield Camera Mounting Hardware Versatile Camera Mounting Bracket Window Warning Sticker Drilling Template Quick Start Guide Free Lifetime Customer Support High speed internet connection and wireless router Drill and or Phillips #2 screwdriver (Drilling template included) 3/32” drill bit for pilot holes 7/32” drill bit for wall anchors 7/8” long drill bit (Choose the right drill bit based on the surface material) A compatible Android or iOS phone Ethernet cable (If you’d like a wired camera setup) IMPORTANT: The Camera Power Supply is NOT waterproof. FCC / IC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip- ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If WKLVHTXLSPHQWGRHVFDXVHKDUPIXOLQWHUIHUHQFHWRUDGLRRUWHOHYLVLRQUHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWR΍DQG on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. ȏ&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWGL΍HUHQWIURPWKDWWRZKLFKWKHUHFHLYHULVFRQQHFWHG • Consult the dealer or an experienced radio/TV technician for help. IC STATEMENT / DÉCLA RATION IC: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause in- terference. (2)This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/ récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1)L’appareil ne doit pas produire de brouillage; (2)L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en com- promettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet équipement est conforme aux limites d’exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 5 FIRST, SOME LEARNING IMPORTANT: Guard Pro PTZ Wi-Fi Camera will only work on 2.4 GHz Wi-Fi network and is not compatible with 5 GHz networks. Spot Light Reset Button QR Code Wi-Fi Antenna MicLEDSpeaker Micro SD Card IR Ethernet Cable Connector (Optional hard wire connection) Power Adapter Connector 6 LET’S GET STARTED 1. Download the App Download the Defender Guard app and follow the steps to create an account. An email account is UHTXLUHGIRUYHULȴFDWLRQ DO NOT DOWNLOAD 2. Plug-In Your Camera to Power On <RXUFDPHUDZLOOSHUIRUPDVHOIUDQJHFKHFN:DLWXSWRVHFRQGVIRUWKH/('LQGLFDWRUOLJKWWRȵDVK green before connecting your camera to the App. LED StatusDevice Status Green FlashingReady to set up the device SolidWorking properly Red Flashing Network disconnected Failed to set up the device Solid Booting Device malfunction Green & RedAlternating8SGDWLQJȴUPZDUH 2΍ / 3RZHUR΍ /('WXUQHGR΍ Note: ΔI\RXGRQRWFRQQHFW\RXUFDPHUDLPPHGLDWHO\\RXU/('LQGLFDWRUOLJKWZLOOȵDVKUHGDQG\RXFDQ VWLOOFRQQHFW\RXUFDPHUDWRWKH$SS 7 SETTING UP YOUR CAMERA Step 1: Connect to Wi-Fi and Pair Your Camera IMPORTANT: Before pairing, ensure your phone is connected to a 2.4 GHz Wi-Fi network Tap + to add your camera, then tap “Scan QR code”. Note: ΔI\RXUPRELOHGHYLFHFDQQRWVFDQWKH45FRGHWDSȊ$GG0DQXDOO\ȋ Scan the QR Code on the camera and tap “Next” to Proceed. Note: :HUHFRPPHQGVDYLQJWKH45FRGHLPDJHLQWKHHYHQWWKH45FRGH ODEHORQWKHFDPHUDJHWVGDPDJHG :DLWIRUWKHFDPHUD/('WRȵDVKJUHHQVORZO\7DS“Next” to proceed. 8 Join the camera’s local network to start the pairing. Tap “Join” to enable the direct communication between your phone and camera. Select the …

Text truncated - open the document above for the full version.

Empowerment Technologies Inc Date: 1/10/2023 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services (Guangzhou) Co., Ltd., Song Shan Lake Branch to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services (Guangzhou) Co., Ltd., Song Shan Lake Branch on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services (Guangzhou) Co., Ltd., Song Shan Lake Branch as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; DocuSign Envelope ID: 5D2BC482-42F1-4F8B-BEC3-646C45112E51 f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by: Company Name: Empowerment Technologies Inc Contact Name: Rajesh Jain Title of Person：CEO and Owner Address: 590 York Rd., Unit 2 Niagara-on-the-Lake L0S 1J0 Canada DocuSign Envelope ID: 5D2BC482-42F1-4F8B-BEC3-646C45112E51

Empowerment Technologies Inc Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2AV6B-IP4MCBPT To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: Empowerment Technologies Inc Contact Name: Rajesh Jain Title of Person：CEO and Owner Address: 590 York Rd., Unit 2 Niagara-on-the-Lake L0S 1J0 Canada Date: 2023/1/10 DocuSign Envelope ID: 5D2BC482-42F1-4F8B-BEC3-646C45112E51

Empowerment Technologies Inc. Address: 590 York Rd., Unit 2 Niagara-on-the-Lake ON L0S 1J0 Canada Confirmation Letter We, Empowerment Technologies Inc. The product: Wi-Fi PT Camera And model No.: IP4MCB1PROPT, IP4MCB2PROPT, IP4MCB3PROPT, IP4MCB4PROPT FCC ID: 2AV6B-IP4MCBPT IC: 26035-IP4MCBPT IP4MCB2PROPT, IP4MCB3PROPT, IP4MCB4PROPT have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with IP4MCB1PROPT. The difference lies only the model number. Contact Name: Rajesh Jain Title of Person：CEO and Owner Date：1/10/2023 DocuSign Envelope ID: 5D2BC482-42F1-4F8B-BEC3-646C45112E51

Appendix I External Photographs Page 2 of 9 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. IP4MCB1PROPT IP4MCB2PROPT Page 3 of 9 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. IP4MCB3PROPT IP4MCB4PROPT Page 4 of 9 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. All View of EUT Top View of EUT Page 5 of 9 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Bottom View of EUT Front View of EUT Page 6 of 9 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Back View of EUT Left View of EUT Page 7 of 9 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Right View of EUT View of antenna Page 8 of 9 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. View of SD card slot View of adapter Note: Four models difference lies only the model number, External photo is shared. Page 9 of 9 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED.

Label and Label Location: Note: This would be a plastic label with a permanent adhesive. Label and Label Location FCC Warning FCC Warning: Note: This would be a plastic label with a permanent adhesive.

Appendix II Internal Photographs Page 2 of 7 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Open View of EUT Internal View of EUT-1 Page 3 of 7 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Internal View of EUT-2 Internal View of EUT-3 Page 4 of 7 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Internal View of EUT-4 Internal View of EUT-5 Page 5 of 7 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Internal View of EUT-7 Internal View of EUT-8 Page 6 of 7 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Internal View of EUT-9 Page 7 of 7 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. RF Model location `

Form-ULID-008536-12 V2.0 The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC RF EXPOSURE REPORT For Wi-Fi PT Camera MODEL NUMBER: IP4MCB1PROPT ADDITIONAL MODEL NUMBER: IP4MCB2PROPT; IP4MCB3PROPT; IP4MCB4PROPT PROJECT NUMBER: 4790693459 REPORT NUMBER: 4790693459-2 FCC ID: 2AV6B-IP4MCBPT IC: 26035-IP4MCBPT ISSUE DATE: Jan. 09, 2023 Prepared for Empowerment Technologies Inc Prepared by UL-CCIC COMPANY LIMITED No. 2, Chengwan Road, Suzhou Industrial Park, People’s Republic of China Tel: + 86-512-6808 6400 Fax: + 86-512-6808 4099 Website: www.ul.com REPORT NO: 4790693459-2 Page 2 of 8 Form-ULID-008536-12 V2.0 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the writte n approval o f UL-CCIC COMPANY LIMITED. Revision History Rev. Issue Date Revisions Revised By V0 01/09/2023 Initial Issue REPORT NO: 4790693459-2 Page 3 of 8 Form-ULID-008536-12 V2.0 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the writte n approval of UL-CCIC COMPANY LIMITED. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................4 2. TEST METHODOLOGY ......................................................................................................5 3. FACILITIES AND ACCREDITATION ..................................................................................5 4. MEASUREMENT UNCERTAINTY.......................................................................................6 5. REQUIREMENT ..................................................................................................................7 REPORT NO: 4790693459-2 Page 4 of 8 Form-ULID-008536-12 V2.0 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the writte n approval of UL-CCIC COMPANY LIMITED. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Empowerment Technologies Inc Address: Unit 2, 590 York Road, Niagara on the Lake, ON, Canada L0S 1J0 Manufacturer Information Company Name: Empowerment Technologies Inc Address: Unit 2, 590 York Road, Niagara on the Lake, ON, Canada L0S 1J0 EUT Description Product Name: Wi-Fi PT Camera Model Name: IP4MCB1PROPT Additional Model Number: IP4MCB2PROPT; IP4MCB3PROPT;IP4MCB4PROPT Model Difference: Only the main model IP4MCB1PROPT was tested and only the data of this model is shown in this test report. Since Their electrical circuit design, layout, components used and internal wiring are identical, only the model numbers are different. Sample Number: 5606541 Data of Receipt Sample: Jan. 04, 2023 Date Tested: Jan. 04, 2023~ Jan. 08, 2023 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47CFR§2.1091 KDB-447498 D01 V06 Complies Prepared By: Reviewed By: Tom Tang Leon Wu Authorized By: Chris Zhong EMC&RF Lab Operations Manager REPORT NO: 4790693459-2 Page 5 of 8 Form-ULID-008536-12 V2.0 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the writte n approval o f UL-CCIC COMPANY LIMITED. 2. T EST METHODOLOGY The tests documented in this report were performed in accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091. 3. FACILITIES AND ACCREDITATION Accreditation Certificate A2LA (Certificate No.: 4829.01) UL-CCIC COMPANY LIMITED has been assessed and proved to be in complia nce with A2LA. FCC (FCC Designation No.: CN1247) UL-CCIC COMPANY LIMITED has been recognized to perform compliance testing on equipment subject to the Commission's Declaration of Conformity (DoC) and Certification rules. IC (IC Designation No.: 25056; CAB No.: CN0073) UL-CCIC COMPANY LIMITED has been recognized to perform compliance testing on equipment subject to the Commission's Declaration of Conformity (DoC) and Certification rules. Note 1: All tests measurement facilities use to collect the measurement data are located at No. 2, Chengwan Road, Suzhou Industrial Park, Suzhou 215122, People’s Republic of China Note 2: For below 30MHz, lab had performed measurements at test anechoic chamber and comparing to measurements obtained on an open field site. These measurements b elow 30MHz had been correlated to measurements performed on an OFS. Note 3: The test anechoic chamber in UL-CCIC COMPANY LIMITED had been calibrated and compared to the open field sites and the test anechoic chamber is shown to be equivalent to or worst case from the open field site. REPORT NO: 4790693459-2 Page 6 of 8 Form-ULID-008536-12 V2.0 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the writte n approval o f UL-CCIC COMPANY LIMITED. 4. MEASUREMENT UNCERTAINTY Where relevant, t he following measurement uncertainty levels have been estimated for tests performed on the apparatus: Test Item Uncertainty Output Power to Antenna 0.69 dB Note: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. REPORT NO: 4790693459-2 Page 7 of 8 Form-ULID-008536-12 V2.0 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the writte n approval o f UL-CCIC COMPANY LIMITED. 5. REQUIREMENT LIMIT Limits for General Population/Uncontrolled Exposure Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) PowerDensity (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (minutes) 0.3-1.34 614 1.63 (100) * 30 1.34-30 824/f 2.19/f (180/f2) * 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- f/150 30 1500-100,000 -- -- 1.0 30 Note 1: f = frequency in MHz, * means Plane-wave equivalent power density Note 2: General populatio…

Text truncated - open the document above for the full version.

深圳市比邻无线科技有限公司 承 认 书 SPECIFICATION FOR APPROVAL 客 户 名 称 CUSTOMER NAME: Empowerment Technologies Inc 产 品 名 称 PRODUCT NAME: 2.4/5.8G W58 白色天线 L=298mm+端子 客 户 料 号 CUSTOMER P/N: 1.1.03.04.15024 比邻电子料号 BL P/N: BL02C388W3D2104A REV: B MANUFACTURER SIGNATURE CUSTOMER SIGNATURE CHECKED BY: 熊文强 APPROVED BY: 张云飞 DATE: 2022/11/20 深圳市比邻无线科技有限公司 Contents ltem Description 1 ---------------------------------------------------------------- 规格表 2 ---------------------------------------------------------- 测试项目及设备 3 ---------------------------------------------------------------- 成品图 4 --------------------------------------------------------------- 测试报告 5 ----------------------------------------------------------- 可靠性测试报告 深圳市比邻无线科技有限公司 1. 规格表 Specification Form: 产品主要技术参数 Product main technical parameters 主要技术指标 Main technical specifications 频率范围 （MHZ） 2400-2500 5150-5850 Frequency Range (MHZ) 2400-2500 5150-5850 特性阻抗(Ω) 50 Impedance(Ω) 50 增益(dBi) ＞1 Gain(dBi) ＞1 天线类型 外置全向 Antenna Type： External omnidirectional 天线效率/% >50% Antenna Efficiency/% >50% 输出电压 驻波比 ≤1.92 VSWR ≤1.92 辐射方向 全向 Radiation Pattern Omnidirectional 最大功率 1W Admitted Power 1W 极化方式 线极化 Polarization Line,Vertical 连接方式 同轴线+1.13 端子 Connector Type RF Cable+1.13 端子 介质耐压 / Dielectric Strength / 接触阻抗 / Contact impedance / 物理性能 Physical Properties 天线本体材料 PC Antenna Base PC 工作温度 -20°C~+60°C Operating Temp -20°C~+60°C 保存温度 -20°C~+60°C Storage Temp -20°C~+60°C 深圳市比邻无线科技有限公司 2. 测试项目及设备 test items and equipment Test items Test equipment S Parameter 1.Return Loss 2.VSWR Network analyzer (Agilent E5071B) The whole machine of Passive parameters 1.Frequency 2.Gain 3.Radiation Pattern 1.3D microwave darkroom (5m*5m*5m) 2.Network analyzer (Agilent E5071B) The whole machine of Active parameters 1. TRP 2. TIS 1.3D microwave darkroom (5m*5m*5m) 2.Comprehensive test instrument (CMW500) 通过多探头采集DUT 球面近场数据，再通过严格的数学近远场转换计 算出 DUT 的方向图，依据方向图上的方向性系数计算出无源的增益效率. The DUT spherical near-field data is collected by multiple probes, and the DUT's directional pattern is calculated by strict mathematical near-field conversion. The passive gain efficiency is calculated according to the directivity coefficient on the directional pattern 深圳市比邻无线科技有限公司 3. 成品图 Antenna Photo： 深圳市比邻无线科技有限公司 4. 测试报告 Test Report 3.1：网络分析仪测试报告 Network analyzer test report 4.2 ：Chamber 2D、3DRaditation Pattern (整机数据) 4.2.1 效率及增益 Gain & Efficiency Frequency / MHz Efficiency / dB Efficiency / % Gain/ dB 2400 -1.88 64.89 1.39 2450 -1.85 65.28 1.43 2500 -1.82 65.81 1.79 5150 -2.45 56.88 1.96 5350 -2.51 56.05 2.37 5550 -2.50 56.29 3.19 5700 -2.55 55.58 2.64 5850 -2.30 58.83 2.55 深圳市比邻无线科技有限公司 暗室坐标 深圳市比邻无线科技有限公司 4.2.2 2D/3D 场型图 ANT 3D Radiation with MaxGain 2450MHz 5550MHz 5850MHz 深圳市比邻无线科技有限公司 Theta 90 2D 图 Phi 0 2D 图 Phi 90 2D 图 深圳市比邻无线科技有限公司 4.2.3 测试方法及标准 test method and standard 深圳市比邻无线科技有限公司 5. 可靠性测试报告 测试内容 测试项目 测试条件 判定标准 试验数 判定 1、高温试验 60C°±2C°环境中放置 4H 常温下放置 2H 后，各尺寸 符合正常要求，且外观无 变形、翘曲、脱胶等异常 现象，性能正常. 5pcs 合格 2、低温试验 -20C°±2C°环境中放置 4H 常温下放置 2H 后，各尺寸 符合正常要求，且外观无 变形、翘曲、脱胶等异常 现象，性能正常. 5pcs 合格 3、温度循环试验 在 60C°±2C°环境中放置 30 分钟，取出在常温下放置 5 分 钟，-20C°±2C°环境中放置 30 分钟，取出在常温下放置 5 分钟； 经过如此 5 个循环后，各 尺寸符合正常要求，且外 观无变形、翘曲、脱胶等 异常现象，性能正常. 5pcs 合格 4、耐温热 满足温度 40C°±2C°，湿度 93 ±2%RH 环境放置 XXH 常温下放置 4H 后，各尺寸 符合正常要求，且外观无 变形、翘曲、脱胶等异常 现象，性能正常. 5pcs 合格 5、盐雾试验 10-55 度 盐溶量： 500 ml/hr 盐水溶液浓度： 5+/-1% 试验时间：48H 表面无氧化、生锈 5pcs 合格 6、气密测试 气压 0.05M PA,充气 12S 把整个产品泡在水里，充气 12S 无水泡冒出 5PCS 合格 最终结论 ■ 合格 □不合格

Form-ULID-008536-9 V2.0 The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. This report does not imply that the product(s) has met the criteria for certification. FCC 47 CFR PART 15 SUBPART C ISED RSS-247 Issue 2 CERTIFICATION TEST REPORT For Wi-Fi PT Camera MODEL NUMBER: IP4MCB1PROPT ADDITIONAL MODEL NUMBER: IP4MCB2PROPT; IP4MCB3PROPT; IP4MCB4PROPT PROJECT NUMBER: 4790693459 REPORT NUMBER: 4790693459-1 FCC ID: 2AV6B-IP4MCBPT IC: 26035-IP4MCBPT ISSUE DATE: Jan. 09, 2023 Prepared for Empowerment Technologies Inc Prepared by UL-CCIC COMPANY LIMITED No. 2, Chengwan Road, Suzhou Industrial Park, People’s Republic of China Tel: + 86-512-6808 6400 Fax: + 86-512-6808 4099 Website: www.ul.com REPORT No.: 4790693459-1 ` Page 2 of 163 Form-ULID-008536-9 V2.0 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Revision History Rev. Issue Date Revisions Revised By V0 01/09/2023 Initial Issue REPORT No.: 4790693459-1 ` Page 3 of 163 Form-ULID-008536-9 V2.0 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................4 2. TEST METHODOLOGY ......................................................................................................6 3. FACILITIES AND ACCREDITATION ..................................................................................6 4. CALIBRATION AND UNCERTAINTY .................................................................................7 4.1. MEASURING INSTRUMENT CALIBRATION ................................................................7 4.2. MEASUREMENT UNCERTAINTY.................................................................................7 5. EQUIPMENT UNDER TEST ................................................................................................8 5.1. DESCRIPTION OF EUT ................................................................................................8 5.2. MAXIMUM OUTPUT POWER .......................................................................................9 5.3. CHANNEL LIST .............................................................................................................9 5.4. TEST CHANNEL CONFIGURATION ...........................................................................10 5.5. THE WORSE CASE POWER SETTING PARAMETER ...............................................10 5.6. DESCRIPTION OF AVAILABLE ANTENNAS ..............................................................11 5.7. THE WORSE CASE CONFIGURATIONS ...................................................................11 5.8. DESCRIPTION OF TEST SETUP ...............................................................................12 5.9. MEASURING INSTRUMENT AND SOFTWARE USED ..............................................13 6. MEASUREMENT METHODS ............................................................................................14 7. ANTENNA PORT TEST RESULTS ...................................................................................15 7.1. TEST ENVIRONMENT ................................................................................................15 7.2. ON TIME AND DUTY CYCLE ......................................................................................16 7.3. 6 dB BANDWIDTH ......................................................................................................19 7.4. CONDUCTED POWER ...............................................................................................33 7.5. POWER SPECTRAL DENSITY ...................................................................................41 7.6. CONDUCTED BANDEDGE AND SPURIOUS EMISSIONS ........................................49 7.7. RADIATED TEST RESULTS .......................................................................................80 7.7.1. LIMITS AND PROCEDURE ..................................................................................80 7.7.2. RESTRICTED BANDEDGE ..................................................................................86 7.7.3. SPURIOUS EMISSIONS .................................................................................... 103 8. AC POWER LINE CONDUCTED EMISSIONS ................................................................ 160 9. ANTENNA REQUIREMENTS .......................................................................................... 163 REPORT No.: 4790693459-1 ` Page 4 of 163 Form-ULID-008536-9 V2.0 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Empowerment Technologies Inc Address: Unit 2, 590 York Road, Niagara on the Lake, ON, Canada L0S 1J0 Manufacturer Information Company Name: Empowerment Technologies Inc Address: Unit 2, 590 York Road, Niagara on the Lake, ON, Canada L0S 1J0 EUT Description Product Name: Wi-Fi PT Camera Model Name: IP4MCB1PROPT Additional Model Number: IP4MCB2PROPT; IP4MCB3PROPT;IP4MCB4PROPT Model Difference: Only the main model IP4MCB1PROPT was tested and only the data of this model is shown in this test report. Since Their electrical circuit design, layout, components used and internal wiring are identical, only the model numbers are different. Sample Number: 5606541 Data of Receipt Sample: Jan. 04, 2023 Date Tested: Jan. 04, 2023~ Jan. 08, 2023 APPLICABLE STANDARDS STANDARD TEST RESULTS CFR 47 Part 15 Subpart C PASS…

Text truncated - open the document above for the full version.

REPORT No.: 4790693459-1 ` Page 47 of 163 Form-ULID-008536-9 V2.0 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Test Mode Test Channel Verdict 11N HT20 HCH PASS Test Mode Test Channel Verdict 11N HT40 LCH PASS REPORT No.: 4790693459-1 ` Page 48 of 163 Form-ULID-008536-9 V2.0 UL-CCIC COMPANY LIMITED This report shall not be reproduced except in full, without the written approval of UL-CCIC COMPANY LIMITED. Test Mode Test Channel Verdict 11N HT40 MCH PASS Test Mode Test Channel Verdict 11N HT40 HCH PASS REPORT No.: 4790693459-1 ` Page 49 of 163 Form-ULID-008536-9 V2.0 UL-CCIC COMPANY LIMITED This report shall not be rep…

Text truncated - open the document above for the full version.