2AV6DEVBOOST01EV DC Fast Charging Station

Boost Charger ™ DC Fast Charging Station Operating and Maintenance Manual Version 1.0 Copyright and trademarks ©2014-2020 FreeWire Technologies, Inc. All rights reserved. This material is protected by the copyright laws of the United States and other countries. It may not be modified, reproduced or distributed without the prior, express written consent of FreeWire Technologies, Inc. FREEWIRE, FREEWIRE TECHNOLOGIES, AMP and BOOST CHARGER are U.S. registered trademarks and service marks of FreeWire Technologies, Inc. and cannot be used without the prior written consent of FreeWire®. No part of this document may be photocopied, reproduced or translated to other language without the express written consent of FreeWire®. No accuracy guarantee FreeWire® has taken commercially reasonable efforts to ensure the accuracy, reliability and completeness of the specifications and other information in this manual at the time of its publication. However, the information is provided “as is” without warranty of any kind, and the specifications and other information in this manual do not constitute a contractual obligation and are subject to change at any time without prior notice. FreeWire does not accept any responsibility or liability regarding the accuracy, content, completeness, legality or reliability of the information contained herein. Product disclaimer The Boost Charger™ is designed for specific applications and should not be used for any purpose not expressly set forth in applicable FreeWire product documentation. Warranty information and disclaimer The Limited Warranty you received with your Boost Charger™ is subject to certain exceptions and exclusions. For example, your use of, or modification to, the FreeWire® Boost Charger™ in a manner in which it is not intended to be used or modified will void the limited warranty. You should review your warranty and become familiar with the terms thereof. Other than any such limited warranty, the FreeWire® products are provided “AS IS,” and FreeWire Technologies, Inc. and its distributors expressly disclaim all implied warranties, including any warranty of design, merchantability, fitness for a particular purposes and non- infringement, to the maximum extent permitted by law. Limitation of liability IN NO EVENT SHALL FREEWIRE BE LIABLE FOR ANY DIRECT, INDIRECT, PUNITIVE, INCIDENTAL, SPECIAL CONSEQUENTIAL DAMAGES, TO PROPERTY OR LIFE, WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST BUSINESS, LOST DATA, LOSS OF USE OR COST OF COVER INCURRED ARISING OUT OF OR CONNECTED WITH THE USE, MISUSE OR INABILITY TO USE THE BOOST CHARGER, UNDER ANY THEORY OF LIABILITY, WHETHER IN AN ACTION IN CONTRACT, STRICT LIABILITY, TORT (INCLUDING NEGLIGENCE) OR OTHER LEGAL OR EQUITABLE THEORY, EVEN IF FREEWIRE KNEW OR SHOULD HAVE KNOWN OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY EVENT, THE CUMULATIVE LIABILITY OF FREEWIRE FOR ALL CLAIMS WHATSOEVER RELATED TO THE BOOST CHARGER SHALL NOT EXCEED THE PRICE YOU PAID FOR THE BOOST CHARGER. THE LIMITATIONS SET FORTH HEREIN ARE INTENDED TO LIMIT THE LIABILITY OF FREEWIRE AND SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY. DRAFT Safety and compliance The FreeWire Boost Charger is for Outdoor Use Only and to be mounted on a non-combustible surface such as a concrete pad that extends a minimum of 3 feet beyond the perimeter of the battery system/Boost Charger. The Boost Charger should comply with all local and national codes and standards and only be installed by a licensed contractor and a licensed electrician. It is the site owner’s responsibility to comply with all local codes and safety laws. The most common installation method is discussed in this guide. If for any reason it is not possible to perform the installation following the guide, contact FreeWire Technologies, Inc. FreeWire Technologies, Inc. is not responsible for any damages that may occur resulting from deviations from the instructions outlined in this guide. Lithium-Ion Battery FreeWire Battery Pack 820-00114-01 is to be used exclusively with the Boost Charger. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case, you will be required to correct the interference at your own expense. Important: Changes or modifications to this product not authorized by FreeWire Technologies, Inc., could affect the EMC compliance and revoke your authority to operate this product. Exposure to Radio Frequency Energy: The radiated power output of the 802.11 b/g/n radio and cellular modem in this device is below the FCC radio frequency exposure limits for uncontrolled equipment. The antenna of this product, used under normal conditions, is at least 20 cm away from the body of the user. This device must not be co-located or operated with any other antenna or transmitter by the manufacturer, subject to the conditions of the FCC Grant. This page is left intentionally blank DRAFT Boost Charger DC Fast Charging Station Operating and Maintenance Manual Version 1.0 Table of Contents 1 INTRODUCTION ................................................................................................................................... 6 1.1 Overview ............................................................................................................................................................ 6 2 OPERATING THE BOOST CHARGER ...............................................................…

Text truncated - open the document above for the full version.

Boost Charger ™ DC Fast Charging Station Installation Guide Version 1.0 Copyright and trademarks ©2014-2020 FreeWire Technologies, Inc. All rights reserved. This material is protected by the copyright laws of the United States and other countries. It may not be modified, reproduced or distributed without the prior, express written consent of FreeWire Technologies, Inc. FREEWIRE, FREEWIRE TECHNOLOGIES, AMP and BOOST CHARGER are U.S. registered trademarks and service marks of FreeWire Technologies, Inc. and cannot be used without the prior written consent of FreeWire®. No part of this document may be photocopied, reproduced or translated to other language without the express written consent of FreeWire®. No accuracy guarantee FreeWire® has taken commercially reasonable efforts to ensure the accuracy, reliability and completeness of the specifications and other information in this manual at the time of its publication. However, the information is provided “as is” without warranty of any kind, and the specifications and other information in this manual do not constitute a contractual obligation and are subject to change at any time without prior notice. FreeWire does not accept any responsibility or liability regarding the accuracy, content, completeness, legality or reliability of the information contained herein. Product disclaimer The Boost Charger™ is designed for specific applications and should not be used for any purpose not expressly set forth in applicable FreeWire product documentation. Warranty information and disclaimer The Limited Warranty you received with your Boost Charger™ is subject to certain exceptions and exclusions. For example, your use of, or modification to, the FreeWire® Boost Charger™ in a manner in which it is not intended to be used or modified will void the limited warranty. You should review your warranty and become familiar with the terms thereof. Other than any such limited warranty, the FreeWire® products are provided “AS IS,” and FreeWire Technologies, Inc. and its distributors expressly disclaim all implied warranties, including any warranty of design, merchantability, fitness for a particular purposes and non- infringement, to the maximum extent permitted by law. Limitation of liability IN NO EVENT SHALL FREEWIRE BE LIABLE FOR ANY DIRECT, INDIRECT, PUNITIVE, INCIDENTAL, SPECIAL CONSEQUENTIAL DAMAGES, TO PROPERTY OR LIFE, WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST BUSINESS, LOST DATA, LOSS OF USE OR COST OF COVER INCURRED ARISING OUT OF OR CONNECTED WITH THE USE, MISUSE OR INABILITY TO USE THE BOOST CHARGER, UNDER ANY THEORY OF LIABILITY, WHETHER IN AN ACTION IN CONTRACT, STRICT LIABILITY, TORT (INCLUDING NEGLIGENCE) OR OTHER LEGAL OR EQUITABLE THEORY, EVEN IF FREEWIRE KNEW OR SHOULD HAVE KNOWN OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY EVENT, THE CUMULATIVE LIABILITY OF FREEWIRE FOR ALL CLAIMS WHATSOEVER RELATED TO THE BOOST CHARGER SHALL NOT EXCEED THE PRICE YOU PAID FOR THE BOOST CHARGER. THE LIMITATIONS SET FORTH HEREIN ARE INTENDED TO LIMIT THE LIABILITY OF FREEWIRE AND SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY. Safety and compliance The FreeWire Boost Charger is for Outdoor Use Only and to be mounted on a non-combustible surface such as a concrete pad that extends a minimum of 3 feet beyond the perimeter of the battery system/Boost Charger. The Boost Charger should comply with all local and national codes and standards and only be installed by a licensed contractor and a licensed electrician. It is the site owner’s responsibility to comply with all local codes and safety laws. The most common installation method is discussed in this guide. If for any reason it is not possible to perform the installation following the guide, contact FreeWire Technologies, Inc. FreeWire Technologies, Inc. is not responsible for any damages that may occur resulting from deviations from the instructions outlined in this guide. Lithium-Ion Battery FreeWire Battery Pack 820-00114-01 is to be used exclusively with the Boost Charger. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case, you will be required to correct the interference at your own expense. Important: Changes or modifications to this product not authorized by FreeWire Technologies, Inc., could affect the EMC compliance and revoke your authority to operate this product. Exposure to Radio Frequency Energy: The radiated power output of the 802.11 b/g/n radio and cellular modem in this device is below the FCC radio frequency exposure limits for uncontrolled equipment. The antenna of this product, used under normal conditions, is at least 20 cm away from the body of the user. This device must not be co-located or operated with any other antenna or transmitter by the manufacturer, subject to the conditions of the FCC Grant. Boost Charger DC Fast Charging Station Installation Guide Version 1.0 Table of Contents BEFORE YOU START .................................................................................................................................. 6 GENERAL WARNINGS ............................................................................................................................... 7 SAFETY SHUTDOWN ................................................................................................................................ 7 1 OVERVIEW .....................................…

Text truncated - open the document above for the full version.

Boost Charger ™ DC Fast Charging Station Site Preparation Guide Version 1.0 Copyright and trademarks ©2014-2020 FreeWire Technologies, Inc. All rights reserved. This material is protected by the copyright laws of the United States and other countries. It may not be modified, reproduced or distributed without the prior, express written consent of FreeWire Technologies, Inc. FREEWIRE, FREEWIRE TECHNOLOGIES, AMP and BOOST CHARGER are U.S. registered trademarks and service marks of FreeWire Technologies, Inc. and cannot be used without the prior written consent of FreeWire®. No part of this document may be photocopied, reproduced or translated to other language without the express written consent of FreeWire®. No accuracy guarantee FreeWire® has taken commercially reasonable efforts to ensure the accuracy, reliability and completeness of the specifications and other information in this manual at the time of its publication. However, the information is provided “as is” without warranty of any kind, and the specifications and other information in this manual do not constitute a contractual obligation and are subject to change at any time without prior notice. FreeWire does not accept any responsibility or liability regarding the accuracy, content, completeness, legality or reliability of the information contained herein. Product disclaimer The Boost Charger™ is designed for specific applications and should not be used for any purpose not expressly set forth in applicable FreeWire product documentation. Warranty information and disclaimer The Limited Warranty you received with your Boost Charger™ is subject to certain exceptions and exclusions. For example, your use of, or modification to, the FreeWire® Boost Charger™ in a manner in which it is not intended to be used or modified will void the limited warranty. You should review your warranty and become familiar with the terms thereof. Other than any such limited warranty, the FreeWire® products are provided “AS IS,” and FreeWire Technologies, Inc. and its distributors expressly disclaim all implied warranties, including any warranty of design, merchantability, fitness for a particular purposes and non- infringement, to the maximum extent permitted by law. Limitation of liability IN NO EVENT SHALL FREEWIRE BE LIABLE FOR ANY DIRECT, INDIRECT, PUNITIVE, INCIDENTAL, SPECIAL CONSEQUENTIAL DAMAGES, TO PROPERTY OR LIFE, WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST BUSINESS, LOST DATA, LOSS OF USE OR COST OF COVER INCURRED ARISING OUT OF OR CONNECTED WITH THE USE, MISUSE OR INABILITY TO USE THE BOOST CHARGER, UNDER ANY THEORY OF LIABILITY, WHETHER IN AN ACTION IN CONTRACT, STRICT LIABILITY, TORT (INCLUDING NEGLIGENCE) OR OTHER LEGAL OR EQUITABLE THEORY, EVEN IF FREEWIRE KNEW OR SHOULD HAVE KNOWN OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY EVENT, THE CUMULATIVE LIABILITY OF FREEWIRE FOR ALL CLAIMS WHATSOEVER RELATED TO THE BOOST CHARGER SHALL NOT EXCEED THE PRICE YOU PAID FOR THE BOOST CHARGER. THE LIMITATIONS SET FORTH HEREIN ARE INTENDED TO LIMIT THE LIABILITY OF FREEWIRE AND SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY. Safety and compliance The FreeWire Boost Charger is for Outdoor Use Only and to be mounted on a non-combustible surface such as a concrete pad that extends a minimum of 3 feet beyond the perimeter of the battery system/Boost Charger. The Boost Charger should comply with all local and national codes and standards and only be installed by a licensed contractor and a licensed electrician. It is the site owner’s responsibility to comply with all local codes and safety laws. The most common installation method is discussed in this guide. If for any reason it is not possible to perform the installation following the guide, contact FreeWire Technologies, Inc. FreeWire Technologies, Inc. is not responsible for any damages that may occur resulting from deviations from the instructions outlined in this guide. Lithium-Ion Battery FreeWire Battery Pack 820-00114-01 is to be used exclusively with the Boost Charger. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case, you will be required to correct the interference at your own expense. Important: Changes or modifications to this product not authorized by FreeWire Technologies, Inc., could affect the EMC compliance and revoke your authority to operate this product. Exposure to Radio Frequency Energy: The radiated power output of the 802.11 b/g/n radio and cellular modem in this device is below the FCC radio frequency exposure limits for uncontrolled equipment. The antenna of this product, used under normal conditions, is at least 20 cm away from the body of the user. This device must not be co-located or operated with any other antenna or transmitter by the manufacturer, subject to the conditions of the FCC Grant. This page is left intentionally blank Boost Charger DC Fast Charging Station Site Preparation Guide Version 1.0 Table of Contents GENERAL WARNINGS ............................................................................................................................... 6 1 INTRODUCTION ................................................................................................................................... 7 Boost Charger Overview ...............................................................................................................................…

Text truncated - open the document above for the full version.

This report contains a total of 39 pages and may be reproduced in full only. Partial reproduction may only be done with the written consent of CKC Laboratories, Inc. FreeWire Technologies Inc. REVISED EMC TEST REPORT TO 103944-6 Boost Charger* Model: 160kW* (*See Appendix A for Manufacturer Declaration) Tested to The Following Standards: FCC Part 15 Subpart B Section 15.107 & 15.109 Report No.: 103944-6A Date of issue: September 28, 2020 This test report bears the accreditation symbol indicating that the testing performed herein meets the test and reporting requirements of ISO/IEC 17025 under the applicable scope of testing for CKC Laboratories, Inc. We strive to create long-term, trust based relationships by providing sound, adaptive, customer first testing services. We embrace each of our customers’ unique EMC challenges, not as an interruption to set processes, but rather as the reason we are in business. Test Certificate # 803.01 Page 2 of 39 Report No.: 103944-6A TABLE OF CONTENTS Administrative Information .......................................................................................................................... 3 Test Report Information ............................................................................................................................................ 3 Report Authorization ................................................................................................................................................. 3 Revision History ......................................................................................................................................................... 3 Test Facility Information ............................................................................................................................................ 4 Software Versions ...................................................................................................................................................... 4 Site Registration & Accreditation Information .......................................................................................................... 4 Summary of Results ................................................................................................................................................... 5 Modifications During Testing ..................................................................................................................................... 5 Conditions During Testing.......................................................................................................................................... 6 Equipment Under Test ............................................................................................................................................... 7 FCC Part 15 Subpart B ................................................................................................................................... 8 15.107 AC Conducted Emissions ................................................................................................................................ 8 15.109 Radiated Emissions ...................................................................................................................................... 25 Appendix A: Manufacturer Declaration ...................................................................................................... 37 Supplemental Information .......................................................................................................................... 38 Measurement Uncertainty ...................................................................................................................................... 38 Emissions Test Details .............................................................................................................................................. 38 Page 3 of 39 Report No.: 103944-6A ADMINISTRATIVE INFORMATION Test Report Information REPORT PREPARED FOR: REPORT PREPARED BY: FreeWire Technologies Inc. 1933 Davis St. Suite 301A San Leandro, CA 94577 Kim Romero CKC Laboratories, Inc. 5046 Sierra Pines Drive Mariposa, CA 95338 Representative: Shawn Sullivan Project Number: 103944 DATE OF EQUIPMENT RECEIPT: March 23, 2020 DATE(S) OF TESTING: March 23, 2020 and April 2-3, 2020 Report Authorization The test data contained in this report documents the observed testing parameters pertaining to and are relevant for only the equipment provided by the client, tested in the agreed upon operational mode(s) and configuration(s) as identified herein. Compliance assessment remains the client’s responsibility. This report may not be used to claim product endorsement by A2LA or any government agencies. This test report has been authorized for release under quality control from CKC Laboratories, Inc. Revision History Original: Testing of Boost Charger, Model: 160kW to FCC Part 15 Subpart B Section 15.107 & 15.109. Revision A: Added statement to Conditions Under Test table for clarification of testing setup. Steve Behm Director of Quality Assurance & Engineering Services CKC Laboratories, Inc. Page 4 of 39 Report No.: 103944-6A Test Facility Information Our laboratories are configured to effectively test a wide variety of product types. CKC utilizes first class test equipment, anechoic chambers, data acquisition and information services to create accurate, repeatable and affordable test results. TEST LOCATION(S): CKC Laboratories, Inc. 5046 Sierra Pines Drive Mariposa, CA 95338 Software Versions CKC Laboratories Proprietary Software Version EMITest Emissions 5.03.12 EMITest Immunity 5.03.10 Site Registration & Accreditation Information Location *NIST CB # FCC Japan Canyon Park, Bothell, WA US0081 US1022 A-0136 Brea, CA US0060 US1025 A-0136 Fremont, CA US0082 US1023 A-0136 Mariposa, CA US0103 US1024 A-0136 *CKC’s list of NIST designated countries can be found at: https://standards.gov/cabs/designation…

Text truncated - open the document above for the full version.

Below 1GHz Below 1GHz Below 1GHz, Antenna Position Above 1GHz Above 1GHz