2AV78-INITV4Handheld device used to initialize a seismic recording Node

STRYDE NODE Instructions for Use Copyright © 2020 STRYDE All rights reserved INITIALISATION DEVICE INSTRUCTIONS FOR USE Document Number: 0000000062 Date: 14 th July 2020 Revision: A Initialisation Device Instructions for Use Copyright © 2020 STRYDE All rights reserved 2 Copyright © 2020 STRYDE. All rights reserved. INTELLECTUAL PROPERTY No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without prior written permission of STRYDE. Copyright violators also may be subject to civil penalties. If any copy of the document or portion thereof is made, it must include the copyright notice and other proprietary notices contained herein. Each individual document published by STRYDE may contain other proprietary notices and copyright notices and other information relating to that individual document. Nothing contained herein shall be construed as conferring by implication, estoppel, or otherwise any license or right under any patent, trademark, or other intellectual property right of STRYDE or any third party. The STRYDE publications herein may include typographic inaccuracies or errors. Changes may be made periodically to these publications and such changes will be incorporated in new editions of the publications. STRYDE may make improvements and/or changes in the products and/or the services described in these publications at any time without notice. All documents are provided “as is” without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement. Initialisation Device Instructions for Use Copyright © 2020 STRYDE All rights reserved 3 Table of Contents 1. Safety Information ____________________________________________________ 4 2. Certifications _________________________________________________________ 4 3. Introduction __________________________________________________________ 5 4. Product Overview _____________________________________________________ 5 5. Technical specification _________________________________________________ 5 6. Operation ___________________________________________________________ 6 7. Storage and maintenance ______________________________________________ 7 8. Transportation ________________________________________________________ 7 9. Faults and repair _____________________________________________________ 7 10. End of Life___________________________________________________________ 7 11. Safety Symbols _______________________________________________________ 8 12. Regulatory Markings __________________________________________________ 8 13. FCC Compliance Statement _____________________________________________ 8 14. IC (Canadian Industry) Notice ____________________________________________ 9 Table of Tables No table of figures entries found. Table of Figures No table of figures entries found. Initialisation Device Instructions for Use Copyright © 2020 STRYDE All rights reserved 4 1. Safety Information The following general safety precautions must be observed during all phases of operation of this product. Do not use the device if it appears damaged or defective Do not dismantle or try to repair a broken unit Do not perform any unauthorized modification or change to the device Do not expose to excessive heat or flames Dropping the device and other mechanical abuse may cause damage to sensor, electronics and mechanical parts The device is sealed and not serviceable Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the product. STRYDE assumes no liability for the customer’s failure to comply with these requirements. For further information on safety, please refer to the STRYDE Operation Support Product File. 2. Certifications This product is designed for use in compliance with, and is certified according to, the following certification rules: FCC Part 18.305 FCC Part 15.209 FCC Part 15C Intentional radiators, Frequency Hopping Transmitters / Digital Transmission Systems ETSI EN 303 417 V1.1.1 (2017-09) ETSI EN 303 446-1:V1.2.0 (draft – 2019-03) FCC KDB 680106 D01 RF Exposure Wireless Charging Apps v02 FCC Part 1.1310 Radiofrequency radiation exposure limits ETSI EN 300 328 V1.1.1 (2017-09), ETSI EN 303 413 V1.1.1 (2017-09) EN 301 489-01:V2.2.0, EN 301 489-03:V2.1.1, EN 301 489-17:V3.2.0, EN 61000-6- 1:2007, EN 61000-6-3:2007 + A1:2011 IEC 61010-1:2010, IEC 61010-1:2010/AMD1:2016 Industry Canada ICES-003, Issue 6 – Information Technology Equipment (ITE) OR RSS-Gen, Issue 5 – General Requirements for Compliance of Radio Apparatus and RSS-247, Issue 2 - UN38.3 Rev. 6, T.7 WARNING CAUTION Initialisation Device Instructions for Use Copyright © 2020 STRYDE All rights reserved 5 3. Introduction This manual describes the necessary safety precautions and gives a brief overview of the functionality of the STRYDE Initialisation Device, also referred to as the Initialisation Device. The STRYDE system is a seismic acquisition system for professional use, and the Initialisation Device is used to communicate with the recording sensors and hand-held terminals. For operation and detailed description of the entire system, please refer to the STRYDE Operation Support Product File. 4. Product Overview The STRYDE Initialisation Device is an entirely sealed, self-contained device for initialising nodal recording sensors. The unit is using wireless data transmission through a custom optical link and standard Bluetooth technology. The optical transmitter is low-energy and considered not hazardous to people nor animals. The battery is a single Li-Ion cell, and charging is done by system specific wireless battery chargers through inductive coils. The Initialisation Dev…

Text truncated - open the document above for the full version.

Date: September 18 th , 2020 Attn: Reviewing Engineer, Federal Communications Commission, 7435 Oakland Mills Road, Columbia, MD 21046, USA FCC ID: 2AV78-INITV4 Product Name: Initialisation Device V4 Document Number: 0000000056 Request for Confidentiality To Whom It May Concern, This letter serves as an official request for confidentiality under FCC Rule Sections 0.457(d) and 0.459. We are requesting the documents listed below, which are required to be submitted with this application, be permanently withheld from public review: • Schematics • Block diagrams • Bill of materials • Operational/technical description We are not requesting the short-term confidentiality of any documents. This is not a consumer product and will only be sold to a limited number of industrial customers who will have to sign confidentiality agreements before gaining access to the product and documents. These documents listed above contain trade secrets and proprietary information and are not to be released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Please contact me if there is any additional information you may need. Yours faithfully, Adam Jones Electronics Lead at Stryde

Date: September 18 th , 2020 Attn: Reviewing Engineer, Federal Communications Commission, 7435 Oakland Mills Road, Columbia, MD 21046, USA FCC ID: 2AV78-INITV4 Product Name: Initialisation Device V4 Document Number: 0000000055 Cover Letter To Whom It May Concern, This cover letter accompanies the document pack for the Initialisation Device V4. This product was previously known as the Cheetah Initialisation Device and some of documents included refer to the original name. The intellectual property associated with this product was purchased from WesternGeco and will now be marketed as the STRYDE Initialisation Device. There have been no major changes made to the product that would affect the unintentional radiated emissions. The original test results in Nemko AS Report No. 362180-02 continue to be representative of and applicable to the equipment bearing the changed identification. Please contact me if there is any additional information you may need. Yours faithfully, Adam Jones Electronics Lead at Stryde

Date: August 7 th , 2020 Attn: Reviewing Engineer, Federal Communications Commission, 7435 Oakland Mills Road, Columbia, MD 21046, USA FCC ID: 2AV78-INITV4 Product Name: Initialisation Device V4 Document Number: 0000000092 Declaration of Differences Letter To Whom It May Concern, This letter accompanies the document pack for the Initialisation Device V4. This is a declaration that the STRYDE Initialisation Device V4 (P/N: 103152186, FCC ID: 2AV78-INITV4) and the WesternGeco Cheetah InitDevice v2 (P/N: 103152186, no FCC ID) are, to the best of my knowledge, identical products. Yours faithfully, Adam Jones Electronics Lead at Stryde

STRYDE NODE Instructions for Use Copyright © 2020 STRYDE All rights reserved INITIALISATION DEVICE V4 EXTERNAL PHOTOS Document Number: 0000000057 Date: 14 th July 2020 Revision: A Initialisation Device External Photos Copyright © 2020 STRYDE All rights reserved 2 Copyright © 2020 STRYDE. All rights reserved. INTELLECTUAL PROPERTY No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without prior written permission of STRYDE. Copyright violators also may be subject to civil penalties. If any copy of the document or portion thereof is made, it must include the copyright notice and other proprietary notices contained herein. Each individual document published by STRYDE may contain other proprietary notices and copyright notices and other information relating to that individual document. Nothing contained herein shall be construed as conferring by implication, estoppel, or otherwise any license or right under any patent, trademark, or other intellectual property right of STRYDE or any third party. The STRYDE publications herein may include typographic inaccuracies or errors. Changes may be made periodically to these publications and such changes will be incorporated in new editions of the publications. STRYDE may make improvements and/or changes in the products and/or the services described in these publications at any time without notice. All documents are provided “as is” without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement. Initialisation Device External Photos Copyright © 2020 STRYDE All rights reserved 3 Table of Contents 1. External Photos _______________________________________________________ 4 Table of Tables No table of figures entries found. Table of Figures No table of figures entries found. Initialisation Device External Photos Copyright © 2020 STRYDE All rights reserved 4 1. External Photos Initialisation Device External Photos Copyright © 2020 STRYDE All rights reserved 5 Initialisation Device External Photos Copyright © 2020 STRYDE All rights reserved 6

Material Safety Data Sheet Product: 40443 Page: 1 of 3 Section 1. Product and Company Identification Spec Code: 40443 HMIS Ratings: Product Name: 2M WH PET TC/S730/50#SCK Health 0 Product Use: Pressure Sensitive Label Stock Flammability 0 Manufacturer: Avery Dennison Corporation Reactivity 0 Fasson Roll North America 7670 Auburn Road Painesville, OH 44077 Phone: 440/358-6000 Fax #: 440/358-6596 Emergency Number: 800/535-5053 InfoTrac Information Contacts: For technical information contact your technical sales representative. For additional health/safety/regulatory information please contact: Fasson’s Environmental Health & Safety Department at 440/358-6518. Section 2. Composition/Information on Components Name CAS Number OSHA Hazard Percent Exposure Limits OSHA ACGIH (Yes/ No) (by wt.) TWA/STEL TWA/STEL Face N/A No 30-40 Not established Not established Liner N/A No 50-60 Not established Not established Adhesive N/A No 10-20 Not established Not established Section 3. Hazardous Identification This product contains no hazardous ingredients as defined under OSHA 1900.1200. Section 4. First Aid Measures This product is an article, exposure is not expected. Cuts are possible when handling this material. Provide first aid as with any other cut or abrasion. Eye: N/A Skin: N/A Inhalation: N/A Ingestion: N/A Material Safety Data Sheet Product: 40443 Page: 2 of 3 Section 5. Fire Fighting Measures Flash Point: N/A LEL: N/A UEL: N/A Extinguishing Media: Use foam, carbon dioxide, or water spray when fighting fires involving this material. Fire Fighting Instructions: As in any fire, wear self-contained breathing apparatus and full protective gear. Unusual Hazards: Combustion of this material may evolve smoke, fumes and noxious odors. Section 6. Accidental Release Measures Spill or Release Procedures: Article, no spill or release expected. Section 7. Handling and Storage Handling: Lift with proper handling techniques. Storage: Store in cool, dry area. 72 o F with 50% RH recommended. Section 8. Exposure Control/Personal Protection Engineering Controls: Provide mechanical ventilation when processing this material in enclosed areas. Personal Protective Equipment: General: Gloves Eye/Face Protection: N/A Skin Protection: Cotton or Leather Gloves Respiratory Protection: N/A Section 9. Physical and Chemical Properties Adhesive Properties: Clear, solvent acrylic adhesive. Face Stock Properties: Homogenously pigmented, white polyester film. Liner Properties: Bleached, super calendered kraft stock. Section 10. Stability and Reactivity Chemical Stability: Stable Incompatibility with Other Materials: Elevated temperature, heat and sparks Hazardous Decomposition Products: Carbon monoxide Hazardous Polymerization: Not known to occur Section 11. Toxicological Information No toxicological tests have been performed on this product. Section 12. Ecological Information No toxicological tests have been performed on this product. Material Safety Data Sheet Product: 40443 Page: 3 of 3 Section 13. Disposal Considerations Dispose of in accordance with Local, State and Federal Regulations Section 14. Transport Information Not regulated under DOT. Section 15. Regulatory Information U.S. Federal Regulations: SARA 302: N/A SARA 304: N/A SARA 311-312: N/A SARA 313: N/A TSCA 8(b): Exempt from listing on inventory, article. International Regulations: N/A State Regulations: N/A Section 16. Other Information Revised: April 6, 2004 Created: January 29, 2003 Disclaimer: The information and recommendations contained herein upon data believed to be correct. However, no guarantee or warranty of any kind expressed or implied is made with respect to the information contained herein. This document is furnished for product information, this product is considered an article which is exempt under the OSHA HCS 1900.1200.

REVISION # STRYDE CONFIDENTIAL 1 Stryde Init Device V4 Label Details 1. Init Device Label Location Photo 2. Init Device Label Material Details Material: 2M WH PET TC/S730/50#SCK Finish: B110CR Size: 126 x 12mm

Initialisation Device V4 XXXXXXXXXX 2AV78-INITV4 Stryde Ltd [email protected] China

STRYDE NODE Instructions for Use Copyright © 2020 STRYDE All rights reserved INITIALISATION DEVICE V4 INTERNAL PHOTOS Document Number: 0000000059 Date: 14 th July 2020 Revision: A Initialisation Device Internal Photos Copyright © 2020 STRYDE All rights reserved 2 Copyright © 2020 STRYDE. All rights reserved. INTELLECTUAL PROPERTY No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without prior written permission of STRYDE. Copyright violators also may be subject to civil penalties. If any copy of the document or portion thereof is made, it must include the copyright notice and other proprietary notices contained herein. Each individual document published by STRYDE may contain other proprietary notices and copyright notices and other information relating to that individual document. Nothing contained herein shall be construed as conferring by implication, estoppel, or otherwise any license or right under any patent, trademark, or other intellectual property right of STRYDE or any third party. The STRYDE publications herein may include typographic inaccuracies or errors. Changes may be made periodically to these publications and such changes will be incorporated in new editions of the publications. STRYDE may make improvements and/or changes in the products and/or the services described in these publications at any time without notice. All documents are provided “as is” without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement. Initialisation Device Internal Photos Copyright © 2020 STRYDE All rights reserved 3 Table of Contents 1. Internal Photos _______________________________________________________ 4 Table of Tables No table of figures entries found. Table of Figures No table of figures entries found. Initialisation Device Internal Photos Copyright © 2020 STRYDE All rights reserved 4 1. Internal Photos Initialisation Device Internal Photos Copyright © 2020 STRYDE All rights reserved 5

Report No. 401291-01-R02 Template version: B Nemko Norway Nemko AS, Instituttveien 6, P.O. Box 96 Kjeller, 2027 Kjeller, Norway TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected] ENTERPRISE NUMBER NO974404532 nemko.com/no Test Report Product Initialization Device for logger of seismic data Name and address of the applicant Stryde Ltd. Halkin Building, SE1 7ND London, United Kingdom Name and address of the manufacturer Stryde Ltd. Halkin Building, SE1 7ND London, United Kingdom Model Initialization Device Rating Internal Battery 3.6V Trademark Stryde Serial number SN: 2101001000 and 2101001001 PN: 103152186 Additional information Bluetooth Low Energy Tested according to FCC Part 15, subpart B Other Class B Digital Device ISED Canada ICES-003, Issue 6 ITE Device Order number 401291 Tested in period 2018-12-18 to 2019-01-31 Issue date 2020-11-04 Name and address of the testing laboratory Instituttveien 6 Kjeller, Norway CAB Number: FCC: NO0001 ISED: NO0470 TEL: +47 22 96 03 30 FAX: +47 22 96 05 50 An accredited technical test executed under the Norwegian accreditation scheme Prepared by [Jan G Eriksen] Approved by [G. Suhanthakumar] This report shall not be reproduced except in full without the written approval of Nemko. Opinions and interpretations expressed within this report are not part of the current accreditation. This report was originally distributed electronically with digital signatures. For more information contact Nemko. TEST REPORT FCC Part 15B FCC ID: 2AV78-INITV4 Report no.: 401291-01-R02 Nemko Norway, Instituttveien 6, Kjeller, Norway Page 2 (14) CONTENTS Test Report .......................................................................................................................................... 1 1 INFORMATION ......................................................................................................................... 3 1.1 Test Item .................................................................................................................................... 3 1.2 Test Conditions .......................................................................................................................... 3 1.3 Test Engineer(s) ........................................................................................................................ 3 1.4 Test Equipment .......................................................................................................................... 3 1.5 Comments ................................................................................................................................. 3 2 TEST REPORT SUMMARY ...................................................................................................... 4 2.1 General ...................................................................................................................................... 4 2.2 Test Summary ........................................................................................................................... 5 3 TEST RESULTS ........................................................................................................................ 6 3.1 Field strength of radiated emissions .......................................................................................... 6 4 Measurement Uncertainties .................................................................................................. 12 5 LIST OF TEST EQUIPMENT................................................................................................... 13 6 BLOCK DIAGRAM .................................................................................................................. 14 6.1 Power Line Conducted Emission ............................................................................................. 14 6.2 Test Site Radiated Emission .................................................................................................... 14 TEST REPORT FCC Part 15B FCC ID: 2AV78-INITV4 Report no.: 401291-01-R02 Nemko Norway, Instituttveien 6, Kjeller, Norway Page 3 (14) 1 INFORMATION 1.1 Test Item Name Initialization Device for logger of seismic data FCC ID 2AV78-INITV4 Model/version 103152186 Serial number 2101001000 and/or 2101001001 Hardware identity and/or version 103152186 v2 Software identity and/or version InitDeviceAppRevC-20181212-131952 and InitDeviceBtldRevC-20181212-131952 Operating Modes Normal with BlueTooth module transmitting in Type of Power Supply Internal Battery Antenna Connector N/A Desktop Charger InitDevice Charger (103053489) BlueTooth Low Energy module FCC ID: S9NSPBTLERF Description of Test Item The tested device is a “initialization device” for a Western Geco seismic logger. Before deployment of the logger the tested device is held on top of it, followed by initialization of the logger. The tested device has a Bluetooth Low Energy communication link for communication with a handheld device where initialization information is contained. Initialization information is transferred to the tested device via Bluetooth Low Energy, then the initialization of the seismic logger is performed over an infrared link. The deviced contains an approved Bluetooth Low Energy Module with FCC ID: S9NSPBTLERF. 1.2 Test Conditions Temperature: 21.1 – 22.1 °C Relative humidity: 41 - 50 % Normal test voltage: N/A – the device is battery powered with internal battery The values are the limit registered during the test period. 1.3 Test Engineer(s) Jan G Eriksen 1.4 Test Equipment See list of test equipment in clause 4. 1.5 Comments All ports were populated during spurious emission measurements. TEST REPORT FCC Part 15B FCC ID: 2AV78-INITV4 Report no.: 401291-01-R02 Nemko Norway, Instituttveien 6, Kjeller, Norway Page 4 (14) 2 TEST REPORT SUMMARY 2.1 General All measurements are tracable to national standards. The tests were conducted for the purpose of demonstrating compliance with FCC CFR 47 Part 15B. Tests were performed in acc…

Text truncated - open the document above for the full version.

REVISION # STRYDE CONFIDENTIAL 1 Stryde Init Device V4 Test Setup Photos 1. Init Device Test Setup Photos REVISION # STRYDE CONFIDENTIAL 2