2AV7CRCH-2-1Reach is designed to retain and secure firearms and only release with proper authentication from a biometric scan or NFC tag.

Reach TM USER GUIDE Table of Contents What is included .................................................................................. Set up ...................................................................................................... Lock ......................................................................................................... Unlock ..................................................................................................... Adding new fingerprint ...................................................................... Battery ..................................................................................................... Soft reset ................................................................................................ Mounting ................................................................................................ Holster Insert.......................................................................................... Mechanical key .................................................................................... Troubleshooting.................................................................................... General maintance.............................................................................. What is Included? Reach Unit Holster Insert Keys User guide Allen wrench Charging cable Charging mount Screws 1X1X2X 1X1X 1X 1X 4X Reach Set up - Biometric A B C Press the white button to start fingerprint registration process Note: If you already registered your master RFID, you must unlock Reach first with your tag and then press the white button within 5 seconds, to enter the master RFID registration process Unit turns on and the top lights all turn red Place finger onto the fingerprint sensor One of the red lights will turn green Lift finger and repeat until all lights turn green (3 times in total) You have now registered the “master” fingerprint Set up - RFID A B C Press the white button to start RFID registration process Note: If you already registered your master fingerprint, you must unlock Reach first with your fingerprint and then press the white button within 5 seconds, to enter the master RFID registration process Unit turns on and the top lights all turn red Place your RFID bracelet onto the top of the RFID sensor like shown All lights will turn green to indicate the RFID has been successfully added You have now registered the “master” RFID bracelet Lock Place the gun into the holster and push down from the handle. The gun will go down and lock into place A B C A single red light will appear for X seconds to indicate that the gun has been locked then go out. Pull on the handle to confirm that the gun is properly secure Unlock (Biometric/RFID) Biometric RFID Place your registered fingerprint on the sensor to unlock Lights will turn green to indicate an unlock Lights will flash red to indicate incorrect fingerprint A B Tap your RFID bracelet onto the top of the RFID sensor to unlock Lights will turn green to indicate an unlock Lights will flash red to indicate incorrect RFID Adding New Fingerprints Unlock Reach with the master fingerprint A B C D Reach will enter fingerprint registration mode. The lights will all turn red. Place new finger onto sensor 3 times Once all 3 lights are green, the fingerprint has been successfully added Press the white button within 5 seconds of unlocking This timeout that prevents someone from adding a fingerprint when Reach is left unlocked X5 X3 Adding new RFID bracelets/tags Reach will enter RFID registration mode. The lights will all turn red. Place new RFID bracelet or tag onto RFID sensor Once all lights turn green, the RFID has been successfully added A B C Unlock Reach with the master RFID bracelet Press the white button within 5 seconds of unlocking This timeout that prevents someone from adding a fingerprint when Reach is left unlocked Battery life When you plug Reach into power using the charging mount, A blue light will glow to show a successful connection to power has been made A B C Checking battery life (while charging) Press the white button (Explain the UI process here for this) To check on the battery life Press the white button The blue lights will indicate how much power Reach has (1 blue light = X%, 2 blue lights = X%, 3 blue lights = X%) Soft Reset If Reach has any software issues, you can do a “soft” reset Hold the white button for X seconds Lights will cycle A B *A soft reset will still retain all registered fingerprints and RFID bracelets Mounting Reach (insert instructions on charging mount, etc) Drilling/bolting the mount Bottom clearance Charging cable Putting Reach into mount Using keys to remove slide Tightening screw with allen key Putting the slide back Changing out the holster insert A B C Insert the key into the slot at the bottom of the Reach holstersafe. Turn clockwise and remove the slide by pulling down. Place the holster insert into the main housing as shown. (The brass locking cam should go into the top hole) Reassemble the slide by lining it up on the rail and sliding upwards until locked. (Tip: turning the key while pushing the slide back up makes it easier) Mechanical Key Override If Reach has any software issues, you can do a “soft” reset Hold the white button for X seconds Lights will cycle *A soft reset will still retain all registered fingerprints and RFID bracelets Troubleshooting (insert answers to common issues) Hard reset Support email General Maintenance The Reach® biometric safe or any other firearm storage device cannot take the place of other safety proce- dures including teaching children of the dangers of firearms. The manufacturers and distributors of the Reach® safe do not recommend, suggest, advise, promote, or otherwise condone the ownership or use of firearms. Vara Safety believes the decision to own or use a fire- arm is a serious decision that should only be made by an adult who has carefully considered the risks and benefi…

Text truncated - open the document above for the full version.

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Date: Subject: Request for Permanent Confidentiality FCC ID: 2AV7CRCH-2-1 To Whom It May Concern: In accordance with §0.457(d) and §0.459 of CFR 47, and KDB 726920, Vara Safety hereby requests permanent confidentiality for documents filed under the following exhibit types: 1. Block Diagram 2. Schematic Diagram 3. Part List 4. Operational Description These items contain detailed system and equipment description and related information about the product which Vara Safety considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Vara Safety also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. We are aware that exhibit types cover letters, attestations, label document, test reports, RF exposure information (SAR and MPE reports), cannot be requested to be classified confidential and are thus subject to publication, as will be documents of all other exhibits types for which we have not requested a confidentiality classification. Best Regards, _______________________________ Signature Name: Title: Company Name: Address: 17-April-2020 CTO Austin Rivera Vara Safety 49 4th St, Suite 2424, Troy, NY 12180

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Date: Subject: Request for Short Term Confidentiality FCC-ID: To Whom It May Concern: In accordance with §0.457(d) and §0.459 of CFR 47, Vara Safety hereby requests short term confidentiality for documents filed under the following exhibit types: 1. External Photographs 2. Internal Photographs 3. User / Instruction Manual 4. Test Set-up Photographs until the product will be publicly announced. Short term confidentiality release date / period: 90 days from grant issue. These items contain detailed system and equipment description and related information about the product which Vara Safety considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Vara Safety also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. We are informed and aware of our obligation that we have to inform the involved TCB in written and in due time if we intend to market the product prior to the above specified confidentiality release date so that the short term confidentiality classification can be reset prior to product launch. We are aware that exhibit types cover letters, attestations, label document, test reports, RF exposure information (SAR and MPE reports), cannot be requested to be classified confidential and are thus subject to publication, as will be documents of all other exhibits types for which we have not requested a confidentiality classification. Best Regards, ____________________________________ Signature Name: Title: Company Name: Address: 2AV7CRCH-2-1 17-April-2020 Austin Rivera CTO 49 4th St, Suite 2424, Troy, NY 12180 Vara Safety

231 Hill St, Troy, NY 12180 www.varasafety.com FCC Exhibit for 2AV7CRCH-2-1 External Photos 231 Hill St, Troy, NY 12180 www.varasafety.com 231 Hill St, Troy, NY 12180 www.varasafety.com 231 Hill St, Troy, NY 12180 www.varasafety.com 231 Hill St, Troy, NY 12180 www.varasafety.com 231 Hill St, Troy, NY 12180 www.varasafety.com

PROJECT TITLE DRAWN CHECKED APPROVED SCALEFINISHSHEET MATERIALREVVARA PART #SIZE THIS DOCUMENT CONTAINS CONFIDENTIAL & PROPRIETARY INFORMATION THAT CANNOT BE REPRODUCED OR DIVULGED, IN WHOLE OR IN PART, WITHOUT WRITTEN AUTHORIZATION FROM VARA SAFETY UNLESS OTHERWISE SPECIFIED TOLERANCES X.X = ±0.03 X.XXX = ±0.005 X.XX = ±0.01 ANGLES = ±0.5° ALL DIMENSIONS ARE IN INCHES 1 of 1laser etched1:1 6/16/2020Austin Rivera BB Reach2 Reach2_Electronics Housing _Serial# A DETAIL A SCALE 3:1 1.54 .54 0 .39 0 1.24 NOTE -S/N should be sequential starting at 200001. -Text should be laser etched. -Text font is 5 pts solid black.

231 Hill St, Troy, NY 12180 www.varasafety.com FCC Exhibit for 2AV7CRCH-2-1 Internal Photos 231 Hill St, Troy, NY 12180 www.varasafety.com 231 Hill St, Troy, NY 12180 www.varasafety.com 231 Hill St, Troy, NY 12180 www.varasafety.com 231 Hill St, Troy, NY 12180 www.varasafety.com

A2LA Accredited IC recognized # 3462B-1 CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2905571 V4.0 2012-07-25 The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to CETECOM Inc. © Copyright by CETECOM Radio Frequency Exposure Evaluation Report FOR Vara Safety Marketing Name Reach 2 Model Name RCH-2-1 Product Description Reach is designed to retain and secure firearms and only release with proper authentication from a biometric scan or NFC tag. FCC ID: 2AV7CRCH-2-1 Applied Rules and Standards: CFR 47 Part 2.1093 FCC KDB 447498 D01 General RF Exposure Guidance v06 Test Report #: SAR_EX_VARAS_001_20001_FCC_Draft DATE: 6/1/2020 Test Report #: SAR_EX_VARAS_001_20001_FCC FCC ID: 2AV7CRCH-2-1 Date of Report: 6/1/2020 Page 2 of 8 Contents 1 Assessment .................................................................................................................................................................................. 3 2 Administrative Data ....................................................................................................................................................................... 4 2.1 Identification of the Testing Laboratory Issuing the Test Report .......................................................................................... 4 2.2 Identification of the Client ..................................................................................................................................................... 4 2.3 Identification of the Manufacturer ......................................................................................................................................... 4 3 Equipment under Assessment ...................................................................................................................................................... 5 4 FCC Exemption Limits for Routine Evaluation .............................................................................................................................. 6 4.1 FCC SAR test exclusions are set by KDB 447498 D01 General RF Exposure Guidance v06 ............................................ 6 4.1.1 Section: 4.3.1. Standalone SAR test exclusion considerations .................................................................................. 6 5 SAR Exclusion Evaluation ............................................................................................................................................................ 7 5.1 Standalone ........................................................................................................................................................................... 7 6 Revision History ............................................................................................................................................................................ 8 Test Report #: SAR_EX_VARAS_001_20001_FCC FCC ID: 2AV7CRCH-2-1 Date of Report: 6/1/2020 Page 3 of 8 1 Assessment The following device meets the limits of general population uncontrolled exposure specified in CFR 47 Part 2.1093 according to SAR evaluation exclusion requirements specified in FCC regulation as listed in KDB 447498. Responsible for Testing Laboratory: 6/1/2020 Compliance Cindy Li (Lab Manager) Date Section Name Signature Responsible for the Report: 6/1/2020 Compliance Ghanma, Issa (EMC Engineer) Date Section Name Signature The test results of this test report relate exclusively to the test item specified in Section3. CETECOM Inc. USA does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of CETECOM Inc. USA. Test Report #: SAR_EX_VARAS_001_20001_FCC FCC ID: 2AV7CRCH-2-1 Date of Report: 6/1/2020 Page 4 of 8 2 Administrative Data 2.1 Identification of the Testing Laboratory Issuing the Test Report Company Name: CETECOM Inc. Department: Compliance Street Address: 411 Dixon Landing Road City/Zip Code Milpitas, CA 95035 Country USA Telephone: +1 (408) 586 6200 Fax: +1 (408) 586 6299 Compliance Manager: Li, Cindy Responsible Project Manager: Sivaraman, Sangeetha 2.2 Identification of the Client Applicant’s Name: Vara Safety Street Address: 49 4 th St. Suite 2424 City/Zip Code Troy, NY 12180 Country USA 2.3 Identification of the Manufacturer Applicant’s Name: ----Same as Client ---------------------------- Street Address: ----Same as Client ---------------------------- City/Zip Code ----Same as Client ---------------------------- Country ----Same as Client ---------------------------- Test Report #: SAR_EX_VARAS_001_20001_FCC FCC ID: 2AV7CRCH-2-1 Date of Report: 6/1/2020 Page 5 of 8 3 Equipment under Assessment Model #: RCH-2-1 Hardware Version: 2.0 Software Version: 2.0 Minimum distance of antenna or radiating parts to user 5mm Radios included in the device:  NFC o Module name: NXP MFRC522 o Model number: MFRC52202HN1 o Frequency Range / number of channels: 13.56 MHz / 1 Channel Co-located Transmitters/ Antennas:  Yes  No Exposure Category:  Occupational/ Controlled  General Population/ Uncontrolled Device Category:  Fixed Installation  Mobile  Portable  Mixed Mobile and Portable Power Supply/ Rated Operating Voltage Range: Low 1.8 VDC, Nominal 3.3 VDC, High 6.0 VDC Operating Temperature Range: Low -20⁰ C, Nominal 20⁰ C, High 45⁰ C Sample Revision: Prototype Unit; Production Unit; Pre-Production EUT Dimensions [mm]: 16.5 x 8.1 x 2.5 EUT Diameter:  < 60 cm  Other __________ Test Report #: SAR_EX_VARAS_001_20001_FCC FCC ID: 2AV7CRCH-2-1 Date of Report: 6/1/…

Text truncated - open the document above for the full version.

A2LA Accredited IC recognized # 3462B-1 CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2905571 V4.0 2012-07-25 The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to CETECOM Inc. © Copyright by CETECOM FCC Test Report FOR: Vara Safety Marketing name: Reach 2 Model Number RCH-2-1 Product Description Reach is designed to retain and secure firearms and only release with proper authentication from a biometric scan or NFC tag. FCC ID: 2AV7CRCH-2-1 Applied Rules and Standards Title 47 CFR: Part 15.225 REPORT #: EMC_VARAS_001_20001_FCC_15.225_NFC_Rev1 DATE: 7/13/2020 Test Report #: EMC_VARAS_001_20001_FCC_15.225_NFC_Rev1 FCC ID: 2AV7CRCH-2-1 Date of Report 7/13/2020 Page 2 of 37 TABLE OF CONTENTS 1 ASSESSMENT .............................................................................................................................................................. 3 2 ADMINISTRATIVE DATA .............................................................................................................................................. 4 2.1 IDENTIFICATION OF THE TESTING LABORATORY ISSUING THE EMC TEST REPORT ............................................................................. 4 2.2 IDENTIFICATION OF THE CLIENT ............................................................................................................................................. 4 2.3 IDENTIFICATION OF THE MANUFACTURER ................................................................................................................................ 4 3 EQUIPMENT UNDER TEST (EUT) .................................................................................................................................. 5 3.1 EUT SPECIFICATIONS .......................................................................................................................................................... 5 3.2 EUT SAMPLE DETAILS.......................................................................................................................................................... 5 3.3 ACCESSORY EQUIPMENT (AE) DETAILS.................................................................................................................................... 6 3.4 TEST SAMPLE CONFIGURATION ............................................................................................................................................. 6 3.5 MODE OF OPERATION DETAILS .............................................................................................................................................. 6 3.6 JUSTIFICATION FOR WORST CASE MODE OF OPERATION ............................................................................................................ 6 4 SUBJECT OF INVESTIGATION ....................................................................................................................................... 7 4.1 MEASUREMENT UNCERTAINTY .............................................................................................................................................. 7 4.2 ENVIRONMENTAL CONDITIONS DURING TESTING: ..................................................................................................................... 7 4.3 DATES OF TESTING:............................................................................................................................................................. 7 5 MEASUREMENT RESULTS SUMMARY ......................................................................................................................... 8 6 MEASUREMENT PROCEDURES .................................................................................................................................... 9 6.1 RADIATED MEASUREMENT ................................................................................................................................................... 9 7 TEST RESULT DATA ................................................................................................................................................... 12 7.1 FIELD STRENGTH ............................................................................................................................................................... 12 7.2 FREQUENCY STABILITY ....................................................................................................................................................... 15 7.3 TRANSMITTER SPURIOUS EMISSIONS AND RESTRICTED BANDS ................................................................................................... 29 8 TEST SETUP PHOTOS ................................................................................................................................................. 36 9 TEST EQUIPMENT AND ANCILLARIES USED FOR TESTING ......................................................................................... 36 10 REVISION HISTORY ................................................................................................................................................... 37 Test Report #: EMC_VARAS_001_20001_FCC_15.225_NFC_Rev1 FCC ID: 2AV7CRCH-2-1 Date of Report 7/13/2020 Page 3 of 37 1 Assessment The following device as further described in section 3 of this report was evaluated for unlicensed radio according to criteria specified in Code of Federal Regulations Title 47 CFR: Part 15.225. No deviations were ascertained. According to section 5 of this report, the overall result is PASS. Company Description Model # Vara Safety Reach is designed to retain and secure firearms and only release with proper authentication from a biometric scan or NFC tag. RCH-2-1 Responsible for Testing Laboratory: 7/13/2020 Compliance Li, Cindy (Lab Manager) Date Section Name Sig…

Text truncated - open the document above for the full version.

CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2905571 FCC Test Setup Photos FOR: Vara Safety Marketing Name Reach 2 Model Name RCH-2-1 Product Description: Reach is designed to retain and secure firearms and only release with proper authentication from a biometric scan or NFC tag. FCC ID: 2AV7CRCH-2-1 Addition to Report #: EMC_VARAS_001_20001_FCC_15.225_NFC_Rev1 DATE: 7/13/2020 Page 2 of 11 EUT Photos Test Sampels Info: Page 3 of 11 Internal Back Internal Bottom Internal Front Internal Side Internal Top External Back Page 4 of 11 External Bottom External Front External Side 1 External Side 2 External Top Page 5 of 11 Power Adapter Page 6 of 11 Radiated Measurements 9 KHz to 30 MHz Page 7 of 11 30 MHz to 1 GHz Page 8 of 11 1 GHz to 3 GHz Page 9 of 11 3 GHz to 18 GHz Page 10 of 11 Frequency Stability Page 11 of 11  Revision History Date Report Name Changes to report Report prepared by 6/1/2020 EMC_VARAS_001_20001_FCC_Setup_Photos Initial Version Issa Ghanma 7/13/2020 EMC_VARAS_001_20001_FCC_Setup_Photos_Rev1 Update report # on cover page. (Page 1) Issa Ghanma <<< The End >>>