2AVBM-AMR5MINI PC

FOIRE AUX QUESTIONS Schritt 1: Vergewissern Sie sich, dass auf dem neuen Datenträger die Partition hinzugefügt wurde. Andernfalls erkennt Windows den Datenträger nicht. Schritt 2: Sie können den Windows Disk Manager oder eine beliebige Partitionierungs software verwenden, um die Aufgabe zu erledigen. Nach der Partitionierung sollten Sie es sehen und entsprechend formatieren können. 材质：157g铜版纸+过油 尺寸：L82.5*H110(mm) 装订方式：钉装 . us FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device shall be used with a minimum distance of 20cm from the users. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. the device shall be used with a minimum distance of 20cm from users. FCC ID: 2AVBM-AMR5 AMR5 Mini PC The device shall be used with a minimum distance of 20cm from users.

Document Number: 538080-3.8 Intel ® Dual Band Wireless AC 7265; Intel ® Dual Band Wireless-N 7265; Intel ® Wireless-N 7265; (Stone Peak 2 M.2 2230 and 1216); Intel ® Dual Band Wireless AC 3165 (Stone Peak M.2 2230) External Product Specification (EPS) November 2016 Revision 3.8 Intel Confidential Intel ® Dual Band Wireless (Stone Peak) External Product Specification (EPS) November 2016 2 Intel Confidential Document Number: 538080-3.8 Notice: This document contains information on products in the design phase of development. The information here is subject to change without notice. Do not finalize a design with this information. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death. SHOULD YOU PURCHASE OR USE INTEL’S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information. Intel software products are copyrighted by and shall remain the property of Intel Corporation. Use, duplication, or disclosure is subject to restrictions stated in Intel’s Software License Agreement, or in the case of software delivered to the government, in accordance with the software license agreement as defined in FAR 52.227-7013. The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. The code names presented in this document are only for use by Intel to identify products, technologies, or services in development that have not been made commercially available to the public, i.e., announced, launched, or shipped. They are not "commercial" names for products or services and are not intended to function as trademarks. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-548-4725 or by visiting Intel’s website at http://www.intel.com/design/literature.htm. Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family, not across different processor families. See http://www.intel.com/products/processor_number for details. Intel is a trademark of Intel Corporation or in the US and other countries. * Other brands and names may be claimed as the property of others. Copyright © 2016 Intel Corporation. All rights reserved. Intel ® Dual Band Wireless (Stone Peak) November 2016 External Product Specification (EPS) Document Number: 538080-3.8 Intel Confidential 3 Revision History Revision Description Date 0.8 Initial release. October 3, 2013 1.0 Added:  Section 1 – Android* POR note  Section 6 –receive sensitivity targets  Section 7.2.6 –note regarding SAR SKU transmit power setting Updated:  Section 3.4 –power consumption targets November 12, 2013 1.1 Added: Section 7 Wi-Fi Throughput Targets December 4, 2013 2.0 Added:  Section 3.4.3.1 –L1 PM substates Control Register Updated:  Section 3.4 –power consumption tables  Section 3.6 –regarding LED open drain status  Section 6 –RX sensitivity tables  Section 8 –TX power tables April 3, 2014 3.0 Updated:  Section 4.1 – PCIe Interface, signal rise time  Section 8.2.1 – Channel configuration  Section 8.2.3 – TX power tables May 1, 2014 3.1 Added:  Section 9.3.1 Antenna connector insertion tool Updated:  Section 3.6 LED indicators May 21, 2014 3.2 Added:  Stone Peak 1  Stone Peak 2 1216 (merged from previously separate 1216 EPS)  Stone Peak 1216 1.8 V – change to internal 1.8 V supply December 12, 2014 3.3 Updated:  Section 3 – airplane mode implementation recommendation  Section 5 – updated power consumption targets  Section 11 – updated weight details April 9, 2015 3.4 Updated:  Regulatory: Added default Tx power table (in addition to FCC and ROW). R emoving WW tables, since we have “default” tables  Added some fixes to the regulatory per country specifications  Added Power up testing limitations  Added Schematic Review guidelines  Antenna specification (swapped 1216 and 2230)  Text fixes, plus cleaning of 2230/1216 reference – Added StP1 1216SD  Updated 1216SD 3D Drawing July 21, 2015 3.5  Added requirement for the PERST# rise time  Chapter 3 heading…

Text truncated - open the document above for the full version.

ShenzhenCYXIndustrialCo.,Ltd. ModelDifference Productdescription:MiniPC Modelname:AMR5,AM07,AM08 TradeName:N/A FCCID:2AVBM-AMR5 AllthemodelareofthesamecircuitandRFmodule,andtheonlydifferenceisthemodel name. Regards Sincerely Client’ssignature: Client’sname/title:KingWang Contactinformation/address:BuildingA,CorrentLowCarbonIndustrialPark,DalangStreet,Longhua District,Shenzhen,China

C5266091_X8_Ed.1 1/1 LetterofAuthorization ShenzhenCYXIndustrialCo.,Ltd. Company:ShenzhenCYXIndustrialCo.,Ltd. BuildingA,CorrentLowCarbonIndustrialPark,DalangStreet,LonghuaDistrict, Shenzhen,China ProductName:MiniPC ModelNumber:AMR5,AM07,AM08 FCCIdentifier:2AVBM-AMR5 WeauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdelCarme,s/n, 08193Bellaterra,Spain,toactonourbehalfonallmattersconcerningthe abovenamedequipment. AnyindividualwithinLGAITechnologicalCenterS.A.isauthorizedtoactonour behalfandtakeactionontheapplication. WedeclarethatauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdel Carme,s/n,08193Bellaterra,Spain,isallowedtoforwardallinformation relatedtotheapprovalprojecttotheFederalCommunicationCommissionand todiscussanyissuesconcerningtheapprovalapplication.Anyandallacts carriedoutbyLGAITechnologicalCenterS.A.onourbehalfshallhavethe sameeffectasactsofourown. Name:KingWangDate:2022/02/28 Title:R&DDirector Signatureofapplicant:

C5266091_X10_Ed.2 1/1 ShenzhenCYXIndustrialCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date: 2022/02/28 Subject:RequestforConfidentiality FCCID:2AVBM-AMR5 ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality NOTE2 IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo ☐ BlockDiagram ☒☐ Schematics ☒☐ TestReportNoNo TestSetupPhotosNo ☐ User’sManual N/A ☐ InternalPhotos N/A ☐ PartsList/TuneUp ☐☐ RFExposureInfoNoNo OperationalDescription ☒☐ CoverLetter(s)NoNo SDRSoftware/SecurityInfo ☐ No NOTE1:Long-TermConfidentialitymaybepermittedunderspecialconditions(SeeII.LONG-TERMCONFIDENTIALITY,Section3of KDB726920,uselastinforce) NOTE2:Short-TermConfidentialitycanberequestedforamaximumof180daysfromthedateofthegrant. Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Incaseofshort-termConfidentiality,theapplicantrequeststheexhibitsselected abovearewithheldfrompublicviewforaperiodof______daysfromthedateofthe GrantofEquipmentAuthorizationandpriortomarketing. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. ☒ C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name:KingWang Title:R&DDirector 2022/02/28

EUTPHOTOS(ExternalPhotos) ※※※※※ENDOFREPORT※※※※※

AMR5_LabelandLabelLocation

EUTPHOTO(InternalPhotos) ANT1 ※※※※※ENDOFREPORT※※※※※

FCCID:2AVBM-AMR5 RFExposureEvaluation Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequencyrange (MHz) Electricfield strength (V/m) Magneticfieldstrength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f 2 )6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f 2 )30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennainmW; G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthetotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitisreached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleandhighest channelindividually. TestResultofRFExposureEvaluation BLEmode ModulationType Outputpower toantenna (dBm) Outputpowerto antenna(mW) PowerDensityat R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result GFSK0.4870.497 0.00034 1.0PASS BTEDRmode ModulationType Outputpower toantenna (dBm) Outputpowerto antenna(mW) PowerDensityat R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 8DPSK3.0362.0120.000611.0PASS 2.4GWi-Fimode ModulationType Outputpower toantenna (dBm) Outputpowerto antenna(mW) PowerDensityat R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result OFDM13.1520.6540.006221.0PASS 5GWi-Fimode ModulationType Outputpower toantenna (dBm) Outputpowerto antenna(mW) PowerDensityat R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result OFDM8.8577.6860.002311.0PASS ThedevicecouldnotsupporttransmissionwithWIFIandBTsimultaneously. Remark:BTantennagain=1.8dBi,Wi-Fiantennagain=1.8dBi

Project No.: ZKT-220225L1105E-2 Page 1 of 73 FCC TEST REPORT FCC ID: 2AVBM-AMR5 Report Number. .................................. :ZKT-220225L1105E-2 Date of Test ............................................ Feb. 24, 2022 to Mar. 02, 2022 Date of issue ......................................... :Mar. 02, 2022 Total number of pages ......................... 73 Test Result .......................................... : PASS Testing Laboratory...........................: Shenzhen ZKT Technology Co., Ltd. Address ............................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ............................. :Shenzhen CYX Industrial Co., Ltd. Address ............................................... : Building A, Corrent Low Carbon Industrial Park, Dalang Street, Longhua District, Shenzhen, China Manufacturer's name ...................... :Shenzhen CYX Industrial Co., Ltd. Address ............................................... : Building A, Corrent Low Carbon Industrial Park, Dalang Street, Longhua District, Shenzhen, China Test specification: Standard................................................: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Test procedure ..................................... : KDB558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10:2013 Non-standard test method................:N/A Test Report Form No. ....................... :TRF-EL-112_V0 Test Report Form(s) Originator ..... :ZKT Testing Master TRF........................................:Dated: 2021-04-22 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name.......................................: Mini PC Trademark ........................................... : N/A Model/Type reference ......................... :AMR5 AM07, AM08 Ratings .................................................. : Input: 19V 3.42A Project No.: ZKT-220225L1105E-2 Page 2 of 73 Testing procedure and testing location: Testing Laboratory .......................................... : Shenzhen ZKT Technology Co., Ltd. Address ............................................................ : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Jim Liu Tested by (name + signature) ....................... : Tom Zou Reviewer (name + signature).......................: Lake Xie Approved (name + signature) ....................... : Project No.: ZKT-220225L1105E-2 Page 3 of 73 Table of Contents Page 1. VERSION...............................................................................................................................................................5 2. TEST SUMMARY.................................................................................................................................................6 2.1 TEST FACILITY..................................................................................................................................................7 2.2 MEASUREMENT UNCERTAINTY..................................................................................................................7 3. GENERAL INFORMATION................................................................................................................................8 3.1 GENERAL DESCRIPTION OF EUT................................................................................................................8 3.2 Test Setup Configuration...................................................................................................................................9 3.3 Support Equipment..........................................................................................................................................10 3.4 Test Mode..........................................................................................................................................................10 3.5 EQUIPMENTS LIST FOR ALL TEST ITEMS..............................................................................................11 4. EMC EMISSION TEST......................................................................................................................................12 4.1 Conducted emissions......................................................................................................................................12 4.1.1 POWER LINE CONDUCTED EMISSION Limits.....................................................................................12 4.1.2 TEST PROCEDURE....................................................................................................................................12 4.1.3 DEVIATION FROM TEST STANDARD....................................................................................................12 4.1.4 TEST SETUP.................................................................................................................................................13 4.1.5 EUT OPERATING CONDITIONS..............................................................................................................13 4.1.6 Test Result.....................................................................................................................................................14 4.2 Radiated emissions..........................................................................................................................................16 4.2.1 Radiated Emission Limits.........................................................................................…

Text truncated - open the document above for the full version.

EUTTESTPHOTOS ※※※※※ENDOFREPORT※※※※※