2AVDO-TRKL0001BLE Printable Asset Label

Product Datasheet Manufacture: Molex Model: BRR1 printed Inverted F antenna (MIFA) Maximum gain (2400 ~ 2480 MHz): 0.68 dBi Figure 1 - Antenna structure. Figure 2 - 3D gain.

Note: This test report was prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This test report shall not be used by the customer to claim product certification, approval, or endorsement by A2LA or any agency of the United States Government or any foreign government. * This test report may contain data and test methods that are not covered by BACL’s scope of accreditation as of the test report date shown above. These items are marked within the test report text with an asterisk “*” FCC PART 15, SUBPART C ISEDC RSS-247, ISSUE 4, July 2025 TEST REPORT For Molex LLC 2222 Wellington Court Lisle, IL 60532, USA FCC ID: 2AVDO-TRKL0001 IC: 26159-TRKL0001 R e p o r t T y p e : O r i g i n a l R e p o r t P r o d u c t T y p e : T r a c k L a b e l B L E P r i n t a b l e A s s e t L a b e l Prepared By: Rachana Khanduri Project Engineer Report Number: R2509242-247 Report Date: 2025-11-18 Reviewed By: Christian McCaig RF Lead Engineer Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue, Sunnyvale, CA 94089, USA Tel: (408) 732-9162 Fax: (408) 732-9164 Molex LLC FCC ID: 2AVDO-TRKL0001, IC: 26159-TRKL0001 Report Number: R2509242-247 Page 2 of 55 FCC Part 15C/ISEDC RSS-247 Report TABLE OF CONTENTS 1 GENERAL DESCRIPTION ...................................................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................ 5 1.2 MECHANICAL DESCRIPTION OF EUT ................................................................................................................... 5 1.3 OBJECTIVE ........................................................................................................................................................... 5 1.4 RELATED SUBMITTAL(S)/GRANT(S) ..................................................................................................................... 5 1.5 TEST METHODOLOGY .......................................................................................................................................... 6 1.6 MEASUREMENT UNCERTAINTY ............................................................................................................................ 6 1.7 TEST FACILITY REGISTRATIONS ........................................................................................................................... 6 1.8 TEST FACILITY ACCREDITATIONS ........................................................................................................................ 7 2 SYSTEM TEST CONFIGURATION ..................................................................................................................... 11 2.1 JUSTIFICATION ................................................................................................................................................... 11 2.2 EUT EXERCISE SOFTWARE ................................................................................................................................ 11 2.3 DUTY CYCLE CORRECTION FACTOR .................................................................................................................. 12 2.4 LOCAL SUPPORT EQUIPMENT ............................................................................................................................. 13 2.5 REMOTE SUPPORT EQUIPMENT .......................................................................................................................... 13 2.6 POWER SUPPLY AND LINE FILTERS .................................................................................................................... 13 2.7 INTERFACE PORTS AND CABLING ....................................................................................................................... 13 3 SUMMARY OF TEST RESULTS ........................................................................................................................... 14 4 FCC §15.203 & ISEDC RSS-GEN §6.8 – ANTENNA REQUIREMENTS .......................................................... 15 4.1 APPLICABLE STANDARDS .................................................................................................................................. 15 4.2 ANTENNA DESCRIPTION ..................................................................................................................................... 16 5 FCC §2.1091, FCC §15.247(I) & ISEDC RSS-102 – RF EXPOSURE ................................................................. 17 5.1 APPLICABLE STANDARDS .................................................................................................................................. 17 5.2 MPE PREDICTION: ............................................................................................................................................. 19 5.3 MPE RESULTS FOR FCC .................................................................................................................................... 19 5.4 MPE RESULTS FOR IC ........................................................................................................................................ 19 6 FCC §15.35(B), §15.205, §15.209, §15.247(D) & ISEDC RSS-247 §6.6, RSS-GEN §8.9, §8.10 – SPURIOUS RADIATED EMISSIONS ............................................................................................................................................... 20 6.1 APPLICABLE STANDARDS .................................................................................................................................. 20 6.2 TEST SETUP........................................................................................................................................................ 23 6.3 TEST PROCEDURE ..................…

Text truncated - open the document above for the full version.

Molex LLC FCC ID: 2AVDO-TRKL0001, IC: 26159-TRKL0001 Report Number: R2509242-247 Page 1 of 2 FCC Part 15C/ISEDC RSS-247 Report Annex E – Spurious Emissions 15.209 Note: below measurements are in units of dBuV/m at 3meters. These measurements are performed conducted in lieu of radiated as permitted by ANSI C63.10-2020. The following formula was used in making such conversions: Above 1GHz: E[dBμV/m] = EIRP[dBm] - 20 log (d[m]) + 104.77, where E is field strength and d is distance at which the field strength limit is specified in the applicable requirements. E[dBμV/m] = EIRP[dBm] + 95.2, for d = 3 m. Straight conversion between E[dBuV/m] and EIRP[dBm} = 107. Thus offset for dBuV/m at 3meters is 95.2-107+Antenna gain. Note: additional factors added to offset to consider attenuator + cable loss. Naming Convention Radio (BLE)_Channel (Low Ch, Mid Ch. High Ch)_Frequency (MHz)_Rate/Mode(Mbit)_Measurement (15.209)_Band Edge (Lower Band Edge, Upper Band Edge, Peak, Avg) BLE_Low Ch_2402MHz_1MBit_15.209_Lower Band Edge Avg BLE_Low Ch_2402MHz_1MBit_15.209_Lower Band Edge Peak Molex LLC FCC ID: 2AVDO-TRKL0001, IC: 26159-TRKL0001 Report Number: R2509242-247 Page 2 of 2 FCC Part 15C/ISEDC RSS-247 Report BLE_High Ch_2480MHz_1MBit_15.209_Upper Band Edge Avg BLE_High Ch_2480MHz_1MBit_15.209_Upper Band Edge Peak

Molex LLC FCC ID: 2AVDO-TRKL0001, IC: 26159-TRKL0001 Report Number: R2509242-247 Page 1 of 2 FCC Part 15C/ISEDC RSS-247 Report Annex D – Spurious Emissions at Antenna Terminal and 100 kHz Band Edges Naming Convention Radio (BLE)_Channel (Low Ch, Mid Ch. High Ch)_Frequency (MHz)_Rate/Mode(Mbit)_Measurement (-20dBc) _Range (MHz, Lower Band Edge, Upper Band Edge) BLE_Low Ch_2402MHz_1MBit_-20dBc_Lower Band Edge BLE_Low Ch_2402MHz_1MBit_-20dBc_30MHz- 10GHz BLE_Low Ch_2402MHz_1MBit_-20dBc_10-26GHz BLE_Mid Ch_2440MHz_1MBit_-20dBc_30MHz- 10GHz Molex LLC FCC ID: 2AVDO-TRKL0001, IC: 26159-TRKL0001 Report Number: R2509242-247 Page 2 of 2 FCC Part 15C/ISEDC RSS-247 Report BLE_Mid Ch_2440MHz_1MBit_-20dBc_10-26GHz BLE_High Ch_2480MHz_1MBit_-20dBc_Upper Band Edge BLE_High Ch_2480MHz_1MBit_-20dBc_30MHz- 10GHz BLE_High Ch_2480MHz_1MBit_-20dBc_10-26GHz

Molex LLC FCC ID: 2AVDO-TRKL0001, IC: 26159-TRKL0001 Report Number: R2509242-247 Page 1 of 1 FCC Part 15C/ISEDC RSS-247 Report Annex C –Power Spectral Density Naming Convention Radio (BLE)_Channel (Low Ch, Mid Ch. High Ch)_Frequency (MHz)_Rate/Mode (MBit)_Measurement (Spectral Density) BLE_Low Ch_2402MHz_1MBit_Spectral Density BLE_Mid Ch_2440MHz_1MBit_Spectral Density BLE_High Ch_2480MHz_1MBit_Spectral Density

Molex LLC FCC ID: 2AVDO-TRKL0001, IC: 26159-TRKL0001 Report Number: R2509242-247 Page 1 of 1 FCC Part 15C/ISEDC RSS-247 Report Annex B - Maximum Output Power Naming Convention Radio (BLE)_Channel (Low Ch, Mid Ch, High Ch)_Frequency (MHz)_Rate/Mode (MBit)_Measurement (Output Power) BLE_Low Ch_2402MHz_1MBit_Output Power BLE_Mid Ch_2440MHz_1MBit_Output Power BLE_High Ch_2480MHz_1MBit_Output Power

Molex LLC FCC ID: 2AVDO-TRKL0001, IC: 26159-TRKL0001 Report Number: R2509242-247 Page 1 of 2 FCC Part 15C/ISEDC RSS-247 Report ANNEX A - Emission Bandwidth Naming Convention Channel (Low, Mid, High)_Frequency (MHz)_Rate (MBit)_Measurement (Occupied Bandwidth)_Type (99percent, -6dB) Low Ch_2402MHz_1MBit_Occupied Bandwidth_- 6dB Low Ch_2402MHz_1MBit_Occupied Bandwidth_99 percent Mid Ch_2440MHz_1MBit_Occupied Bandwidth_- 6dB Mid Ch_2440MHz_1MBit_Occupied Bandwidth_99 percent Molex LLC FCC ID: 2AVDO-TRKL0001, IC: 26159-TRKL0001 Report Number: R2509242-247 Page 2 of 2 FCC Part 15C/ISEDC RSS-247 Report High Ch_2480MHz_1MBit_Occupied Bandwidth_- 6dB High Ch_2480MHz_1MBit_Occupied Bandwidth_99 percent

Molex LLC FCC ID: 2AVDO-TRKL0001, IC: 26159-TRKL0001 Report Number: R2509242-247 Page 17 of 55 FCC Part 15C/ISEDC RSS-247 Report 5 FCC §2.1091, FCC §15.247(i) & ISEDC RSS-102 – RF Exposure 5.1 Applicable Standards According to FCC §15.247(i), Radio frequency devices operating under the provisions of this part are subject to the radio frequency radiation exposure requirements specified in §§ 1.1307(b), 1.1310, 2.1091, and 2.1093 of this chapter, as appropriate. Applications for equipment authorization of mobile or portable devices operating under this section must contain a statement confirming compliance with these requirements. Technical information showing the basis for this statement must be submitted to the Commission upon request. According to FCC §2.1091, and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 * (100) 30 1.34-30 824/f 2.19/f * (180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Molex LLC FCC ID: 2AVDO-TRKL0001, IC: 26159-TRKL0001 Report Number: R2509242-247 Page 18 of 55 FCC Part 15C/ISEDC RSS-247 Report According to ISED RSS-102 Issue 6: Table 7: RF field strength and power density limits for devices used by the general public (uncontrolled environment) Frequency range (MHz) Electric field (V RMS /m) Magnetic field (A RMS /m) Power density (W/m 2 ) Reference period (minutes) 10-20 27.46 0.0728 2 6 20-48 58.07 / f 0.25 0.1540 / f 0.25 8.944 / f 0.5 6 48-300 22.06 0.05852 1.291 6 300-6000 3.142 f 0.3417 0.008335 f 0.3417 0.02619 f 0.6834 6 6000-15000 61.4 0.163 10 6 15000-150000 61.4 0.163 10 616000/ f 1.2 150000-300000 0.158 f 0.5 4.21×10 -4 f 0.5 6.67×10 -5 f 616000/ f 1.2 Molex LLC FCC ID: 2AVDO-TRKL0001, IC: 26159-TRKL0001 Report Number: R2509242-247 Page 19 of 55 FCC Part 15C/ISEDC RSS-247 Report 5.2 MPE Prediction: Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 S = PG/4R² Where: S= power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) 5.3 MPE Results for FCC Maximum output power at antenna input terminal (dBm): 5.14 Maximum output power at antenna input terminal (mW): 3.27 Prediction distance (cm): 20 Prediction frequency (MHz): 2402 Maximum Antenna Gain, typical (dBi): 0.68 Maximum Antenna Gain (numeric): 1.17 Power density of prediction frequency at 20.0 cm (mW/cm 2 ): 0.0008 FCC MPE limit for uncontrolled exposure at prediction frequency (mW/cm 2 ): 1.0 The device is compliant with the requirement MPE limit for uncontrolled exposure. The maximum power density at the distance of 20 cm is 0.0008 mW/cm 2 . Limit is 1 mW/cm 2 . 5.4 MPE Results for IC Maximum output power at antenna input terminal (dBm): 5.14 Maximum output power at antenna input terminal (W): 0.0033 Prediction distance (m): 0.20 Prediction frequency (MHz): 2402 Maximum Antenna Gain, typical (dBi): 0.68 Maximum Antenna Gain (numeric): 1.17 Power density of prediction frequency at 0.20m (W/m 2 ): 0.0076 IC MPE limit for uncontrolled exposure at prediction frequency (W/m 2 ): 5.351 The device is compliant with the requirement IC MPE limit for uncontrolled exposure. The maximum power density at the distance of 0.20m is 0.0076 W/m 2 . Limit is 5.351 W/m 2 .

CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 10/20/2025 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2AVDO-TRKL0001 Molex LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, David King Sr. Product Development Engineer [email protected] (952) 229-1502 2222 Wellington Court Lisle, IL 60532-3820 United States

QA-FR-227-A 11/05/2013 DECLARATION OF SIMILARITY November 14, 2025 To: Bay Area Compliance Laboratories Corp. 1274 Anvilwood Ave. Sunnyvale, CA 94089 Phone: 408-732-9162, Fax: 408-732-9164 http://www.baclcorp.com Dear Sir or Madam: We Molex, LLC hereby declare that product: TrackLabel, model: 135560002 is electrically identical with the same electromagnetic emissions and electromagnetic compatibility characteristics as model: 135560003 tested by BACL tested by BACL, the results of which are featured in BACL project: R2509242. A description of the differences between the tested model and those that are declared similar are as follows: Model Number 135560003 is the model that was tested and contains an external temperature sensor designed to improve the temperature sensing performance of the TrackLabel. The updated Model Number 135560002 utilizes the temperature sensor integrated within the BLE IC. Please note that this internal sensor offers reduced accuracy compared to external alternatives. Please contact me should there be need for any additional clarification or information. Best Regards, David King, Sr. Product Development Engineer 2222 Wellington Ct, Lisle, IL 60532

QA-FR-172-A FCC Confidential Authorization 10/20/2025 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AVDO-TRKL0001 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Molex LLC hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description As well as short-term confidential treatment of information accompanying this application as outlined below:  Internal Photos  User’s Manual  External Photos  Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, David King Sr. Product Development Engineer [email protected] (952) 229-1502 2222 Wellington Court Lisle, IL 60532-3820 United States

QA-FR-170-B 7/29/2014 FCC Authorization October 20, 2025 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Molex LLC. the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corp. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, David King Sr. Product Development Engineer [email protected] (952) 229-1502 2222 Wellington Court Lisle, IL 60532-3820 United States

Attestation Letter for Agent 2025/10/19 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911 (d)(7) Filing FCC ID: 2AVDO-TRKL0001 Molex LLC certifies that, as of the date of the filing of the application, Molex LLC is our designated U.S. agent for service of process for the above referenced FCC ID: 2AVDO- TRKL0001. Molex LLC agrees to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Molex LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company name: Molex LLC (FRN: 0024863532) Address: 2222 Wellington Court, Lisle, IL 60532-3820, United States Contact person: David King Tel: (952) 229-1502 Email: [email protected] Sincerely, Applicant Name Molex LLC Applicant Printed Name David King Applicant Signature

CFR 47 §2.911 (d)(5)(ii) Attestation Letter Attestation Letter Date: 10/20/2025 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2AVDO-TRKL0001 Molex LLC (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, David King Sr. Product Development Engineer [email protected] (952) 229-1502 2222 Wellington Court Lisle, IL 60532-3820 United States