2AVDX-GC474264Edge Lite

Edge Lite User Manual Edge Lite User Manual v1.9 Edge Series Device Edge Lite User Manual by Softhard.io Limited Published Feb, 2018 Copyright 2018 Softhard.io Limited, All rights reserved. Softhard.io Limited makes no representations or warranties with respect to Edge Lite or to the contents or use of this manual, and specifically disclaims any express or implied warranties of merchantability of fitness for any particular pur- pose. Permission is granted to copy and distribute modified versions of this documentation under the conditions for verbatim copying, provided also that the entire resulting derived work is distributed under the terms of a permission notice identi- cal to this one. Permission is granted to copy and distribute translations of this documentation into another language, under the above conditions for modified versions. Edge Lite is a registered trademark of Softhard.io Ltd.. All trademarks, registered trademarks, and service marks are the property of their respective owners. Manufacturer of Edge Lite: NewChamp Technologies Ltd.. Edge Lite User Manual Edge Lite Manual v1.5 Copyright 2018 Softhard.IO Limited – All rights reserved Change Log DateAuthorVersionDescription 2018-11-27Inky Lungv1.0Initial draft 2019-3-15Inky Lungv1.1Add mounting instruction, battery replacement info. 2019-3-20Inky Lungv1.2Change battery pack de- scription 2019-3-29Inky LungV1.3Add installation location 2019-04-02Inky LungV1.4Modified battery model name 2019-06-12Kenny LaiV1.5Add Sigfox support 2019-08-15Inky LungV1.6Add Models Update technical data 2019-09-09Inky LungV1.7Add SigFox certification 2019-12-24Inky LungV1.8Add NB-IoT B12 2020-01-16Inky LungV1.9Changes for NB-IoT model Add FCC warning 2020-04-17Inky LungV1.9.1Reduce Power Level Shrink the channel Edge Lite User Manual 1. Introduction The Softhard.io Edge Series devices allow you to deploy Internet of Things networks in an easy and scalable way, ensuring minimum maintenance costs. The device consists of a robust waterproof enclosure with specific external sockets to connect different types of sensors. It has been specially designed to be scalable, easy to deploy and maintain. Be- sides, it equips with built in M2M modules such as LoRa, NB-IoT or Sigfox interfaces. It sends temperature, humidity, g-sensor data via the M2M bridge. 1.1 Features Robust waterproof IP65 enclosure Add or change a sensor probe in seconds Powered with internal 18650 Li-ion batteries Radios available: NB-IoT Band 3 (~1800MHz), Band 8 (~900MHz), B12 (700MHz, channel, 23178 test) Output power B12 is: 14~15 dBm Built-in sensors: 3-axes accelerometer, temperature and humidity sensor, battery level External interface: digital input, digital output and I2C MicroSD connector SPI flash Buzzer Status LEDs GPS receiver (Optional) BLE receiver (Optional) Size: 133mm x 68mm x 50mm 1.2 Models ModelP/N Edge Lite with NB-IoTSHIO-EL-NB Edge Lite with LoRaWANSHIO-EL-LO Edge Lite with SIgFoxSHIO-EL-SF Note: LoRaWan, GPS and BLE are optional features and all related components are not installed by default. Edge Lite User Manual 2. General view Edge Lite is a NB-IoT device for measuring temperature, humidity, movement. With flexibil- ity of adding external sensors like PIR, ultrasonic, IR, dry contact detection, it provides an easiest way for user to collect different types of data. Edge Lite has built in with 2 pieces 18650 size Lithium battery which the device can sustain to work for a year (depends on data transmission interval). 2.1 Technical Data CoreMain processorARM Cortex-M0 processor, running at frequencies of up to 50 MHz. Memory64 kB on-chip flash programming memory. 256 byte page erase function. 8 kB SRAM. MicroSD connector and SPI flash PeripheralsDimensions140(W) x 50(H) x 70(D) mm Weight0.3 g HousingABS Input voltage3.7V 6400mAh Li-ion battery (Built in) Power consumption160 mA typical SensorsTemp., humidity and 3 axis accelerometer Indicators3 colored LEDs Operation temp.-25°C ... +65°C GPSM8U GPS receiver module (Optional) NB-IoTA9500 NB-IoT module ConnectionsPower Digital input/output GPS antenna (Optional) 868MHz/915MHz LoRa / NB-IoT / Sigfox antenna (Optional) ApprovalsCE markingAccording to directive 89/336/EEC (EMC directive) IP65Test for compliance with degree of protection index IP65 against IEC 60529: 1989 Edition 2.2 + A1: 1999 + A2: 2013‐08 RoHSRoHS Directive (2011/65/EU) IEC 62133IEC 62133:2012 OFCAHKTA 1057 Issue 1 (May 2011) ISO/IEC 17067:2013 Edge Lite User Manual 3. Installation Instructions To power on the Edge Lite, user is required to unscrew the 4 screws as indicated in the fol- lowing photo. Open the cover, user can see the battery and the board. Connect the battery cable and power on the device. Edge Lite User Manual Component Description Edge Lite User Manual Mounting Instruction Edge Lite should be mounted on wall with 4 pieces M4 size screws with locations indicated in the following diagram. Mounting Location Edge Lite should be mounted on wall with suggested distance 1.5m from ground. Please notice user should not installed device near people with 30mm as of the RF transmittance effect. Edge Lite User Manual Battery Replacement Pls use the battery pack provided by Softhard.IO Ltd when the battery pack is completely drained. The correct model is 18650 LG MH1. "Use only rechargeable batteries model 18650 LG MH1 supplied by Softhard.IO Ltd.", and statement“CAUTION: Risk of explosion if battery is replaced by incorrect type disposed of used batteries according to the instruction. Edge Lite User Manual 4. Operations LED indications Here are indications of the LED with different scenarios. DescriptionLED Status Green LED and Red LED FlashingChecking M2M RF module Blue LED FlashingConnecting or Sending Data to Network Blue LED Fast FlashingSuccessfully Joined Network Red LED FlashingEvent Detected, eg. Dry Contact, G-Sensor System Default Setting Device is configured with the following default setup when it is shipped. Data will b…

Text truncated - open the document above for the full version.

FCC, Request for non-disclosureDate: 19-Oct-10 RF_501, Issue 7Page 1 of 1 Company Name:Softhard.IO Ltd. Address:Entrepreneurship Center, Cyberport 3 Core F 100 Cyberport Road City:Hong Kong Country:Hong Kong To:Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Request for confidentiality Subject: Request for confidentiality FCC ID: 2AVDX-GC474264 Reference number: ###### Dear FCC TCB, 1.Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby request non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2.Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Due to market confidential, we ask for the short-term confidentiality by listed. Planned Release Date STC: (notes 2, 3, 4, 5). If no date is given, 180 days from grant date will be used. Date: 2020/4/24Name and signature of applicant: Inky Lung / Director Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY (DoC) Equipment:Edge Lite Trademark(s) and Model(s):Edge Lite & SHIO-EL-NB Manufacturer:Softhard.IO Ltd. FCC ID in case other parts of this equipment are subject to certification: 2AVDX-GC474264 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. The following test reports are subject to this declaration: Test report number: 19C0179R-RFUSP01V00 The following manufacturer/importer/entity (located in the USA) is respons ible for this declaration: Company name:Softhard.IO Ltd. Name/Title (legal representative):Inky Lung / Director Address:Entrepreneurship Center, Cyberport 3, Core F, 100 Cyberport Road, Hong Kong. Phone:+852 2863 9488 Fax:+852 2863 9599 E-mail:[email protected] Date:2020/4/24 Signature:

RF_160, Issue 04 Softhard.IO Ltd. Entrepreneurship Center, Cyberport 3, Core F, 100 Cyberport Road, Hong Kong. Declaration of Authorization We Name:Softhard.IO Ltd. Address:Entrepreneurship Center, Cyberport 3 Core F 100 Cyberport Road City:Hong Kong Country:Hong Kong Declare that: Name Representative of agent:Louis Hsu (1) Agent Company name:DEKRA Testing and Certification Co., Ltd. Address:No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, City:Hsinchu County, CountryTaiwan is authorized to apply for Certification of the following product(s): Product description:Edge Lite Type designation:SHIO-EL-NB Trademark:Edge Lite on our behalf. Date:2020/4/24 City:Hong Kong Name:Inky Lung (2) Function: Director Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

OCEAN COMPONENTS LTD. 2G, PCB Antenna Specifications (with marker @ 700MHz) Part Number: CH200B+1.13+MHF (EG-5002) Rm. 07, 19/F., Block A, D, Golden Bear Industrial Centre, 66~82 Chai Wan Kok Street, Tsuen Wan, New Territories, Hong Kong Tel: (852)- 2392 0136 Fax: (852)- 2392 1036 Frequency (MHz) Return Loss (dB) VSWR Efficiency (%) Gain (dB) 700 -1.75 10.03 11.75 -4.92 850 -9.29 2.06 13.77 -3.93 900 -9.65 1.98 24.15 -1.48 1800 -10.12 1.92 43.85 1.66 1900 -9.03 2.08 49.09 2.1 Test Report(Return Loss & VSWR) 3D Test Photo 3D Test Data

Report No.: 19C0179R-HPUSP40V00 Page: 73 of 91 Attachment 2  EUT External Photograph (1) EUT Photo (2) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 74 of 91 (3) EUT Photo (4) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 75 of 91 (5) EUT Photo (6) EUT Photo

FCC ID: 2AVDX-GC474264 Softhard.IO Ltd. Product name: Edge Lite Model No.: SHIO-EL-NB This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) thi s devic e may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Location

Report No.: 19C0179R-HPUSP40V00 Page: 76 of 91 Attachment 3  EUT Internal Photograph (1) EUT Photo (2) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 77 of 91 (3) EUT Photo (4) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 78 of 91 (5) EUT Photo (Antenna) (6) EUT Photo (Antenna) Report No.: 19C0179R-HPUSP40V00 Page: 79 of 91 (7) EUT Photo (8) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 80 of 91 (9) EUT Photo (10) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 81 of 91 (11) EUT Photo (12) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 82 of 91 (13) EUT Photo (14) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 83 of 91 (15) EUT Photo (16) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 84 of 91 (17) EUT Photo (18) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 85 of 91 (19) EUT Photo (20) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 86 of 91 (21) EUT Photo (22) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 87 of 91 (23) EUT Photo (24) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 88 of 91 (25) EUT Photo (26) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 89 of 91 (27) EUT Photo (28) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 90 of 91 (29) EUT Photo (30) EUT Photo Report No.: 19C0179R-HPUSP40V00 Page: 91 of 91 (31) EUT Photo

Report No. 19C0179R-E3032410101 Page: 1 of 8 RF Exposure Evaluation Declaration Product Name ：Edge Lite Trade Name ：Edge Lite Model No. ：SHIO-EL-NB FCC ID ：2AVDX-GC474264 Applicant : Softhard.IO Ltd. Address : Entrepreneurship Center, Cyberport 3, Core F, 100 Cyberport Road, Hong Kong Date of Receipt : Dec. 11, 2019 Date of Declaration : May 04, 2020 Report No. : 19C0179R-E3032410101 Report Version : V1.0 The declaration results relate only to the samples calculated. The declaration shall not be reproduced except in full without the written approval of DEKRA Testing and Certification Co., Ltd. Report No. 19C0179R-E3032410101 Page: 2 of 8 RF Exposure Evaluation Declaration Issued Date : May 04, 2020 Report No. : 19C0179R-E3032410101 Product Name : Edge Lite Applicant : Softhard.IO Ltd. Address : Entrepreneurship Center, Cyberport 3, Core F, 100 Cyberport Road, Hong Kong Manufacturer : Softhard.IO Ltd. Address : Entrepreneurship Center, Cyberport 3, Core F, 100 Cyberport Road, Hong Kong Trade Name : Edge Lite Model No. : SHIO-EL-NB FCC ID : 2AVDX-GC474264 EUT Voltage : DC 3.7V Testing Voltage : DC 3.7V Applicable Standard : FCC 47 CFR Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. Test Lab : Hsin Chu Laboratory Address : No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 310, Taiwan, R.O.C. TEL: +886-3-582-8001 / FAX: +886-3-582-8958 Test Result : Complied Tested By : ( Max Chang / Senior Engineer ) Approved By : ( Louis Hsu / Deputy Manager ) Report No. 19C0179R-E3032410101 Page: 3 of 8 Revision History Report No. Version Description Issued Date 19C0179R-E3032410101V1.0 Initial issue of report May 04, 2020 Report No. 19C0179R-E3032410101 Page: 4 of 8 1.1. Test Facility Ambient conditions in the laboratory: Items Test Item Required Test Site Temperature (°C) Peak Output Power 15 - 35 3 Humidity (%RH) 25 - 75 Note: Test site information refers to Laboratory Information. Laboratory Information USA : FCC Registration Number: TW3024 The address and introduction of DEKRA Testing and Certification Co., Ltd. laboratories can be founded in our Web site: http://www.dekra.com.tw If you have any comments, please don’t hesitate to contact us. Our test sites as below: Test Laboratory DEKRA Testing and Certification Co., Ltd. Address 1. No. 75-2, 3rd Lin, WangYe Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. 2. No.372, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan, R.O.C. 3. No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan, R.O.C. Phone number 1. +886-3-592-8858 2. +886-3-582-8001 3. +886-3-582-8001 Fax number 1. +886-3-592-8859 2. +886-3-582-8958 3. +886-3-582-8958 E mail address [email protected] Website http://www.dekra.com.tw Report No. 19C0179R-E3032410101 Page: 5 of 8 1.2. List of Test Equipment Peak Output Power / SR12-H Instrument Manufacturer Model No. Serial No. Cal. Date Next Cal. Date Signal & Spectrum Analyzer R&S FSV40 101049 2020/03/30 2021/03/29 EXA Signal Analyzer Keysight N9010A MY514401322020/02/21 2021/02/20 Spectrum Analyzer Keysight N9030B MY571404042019/06/18 2020/06/17 Spectrum Analyzer Keysight N9010B MY571101592019/05/03 2020/05/02 Wireless Conn. Tseter R&S CMW500 157118 2019/08/08 2020/08/07 Wideband Radio Communication Tester R&S CMW500 106071 2020/02/03 2021/02/02 Note: All equipment upon which need to calibrated are with calibration period of 1 year. 1.3. Uncertainty Test item Uncertainty Peak Output Power ±1.27 dB Note: Determining compliance shall be based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Report No. 19C0179R-E3032410101 Page: 6 of 8 2. RF Exposure Evaluation 2.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz RF Field Strength Limits for Controlled Use Devices (Controlled Environment) Frequency Range (MHz) Electric Field (V/m rms) Magnetic Field (A/m rms) Power Density (W/m2) Reference Period (minutes) 0.003-1023 170 180 - Instantaneous* 0.1-10 - 1.6/ ƒ - 6** 1.29-10 193/ ƒ 0.5 - - 6** 10-20 61.4 0.163 10 6 20-48 129.8/ ƒ 0.25 0.3444/ ƒ 0.25 44.72/ ƒ 0.5 6 48-100 49.33 0.1309 6.455 6 100-6000 15.60 ƒ 0.25 0.04138 ƒ 0.25 0.6455ƒ0.5 6 6000-15000 137 0.364 50 6 15000-150000 137 0.364 50 616000/ ƒ 1.2 150000-300000 0.354 ƒ 0.5 9.40 x 10-4 ƒ 0.5 3.33 x 10-4 ƒ 616000/ ƒ 1.2 Note: ƒ is frequency in MHz. *Based on nerve stimulation (NS). ** Based on specific absorption rate (SAR). Report No. 19C0179R-E3032410101 Page: 7 of 8 Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in W/m 2 Pout = output power to antenna in W G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in m Pd is the limit of MPE 0.02619ƒ 0.6834 W/m 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 2.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Report No. 19C0179R-E3032410101 Page: 8 of 8 2.3. Test Result of RF Exposure Evaluation Product Edge Lite Test Mode Transmit Test Condition RF Exposure Evaluation LTE Band NB-IoT Band Frequency (MHz) (Lowest Frequency) Maximum conducted output power (per tune-up) (dBm) Maximum conducted output power (per tune-up) (m…

Text truncated - open the document above for the full version.

Report No.: 19C0179R-HPUSP40V00 Page: 1 of 89 FCC Test Report Product Name : Edge Lite Trade Name : Edge Lite Model No. : SHIO-EL-NB FCC ID : 2AVDX-GC474264 Applicant : Softhard.IO Ltd. Address : Entrepreneurship Center, Cyberport 3, Core F, 100 Cyberport Road, Hong Kong Date of Receipt : Dec. 11, 2019 Issued Date : May 04, 2020 Report No. : 19C0179R-HPUSP40V00 Report Version : V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of DEKRA Testing and Certification Co., Ltd. Report No.: 19C0179R-HPUSP40V00 Page: 2 of 89 Test Report Certification Issued Date : May 04, 2020 Report No. : 19C0179R-HPUSP40V00 Product Name : Edge Lite Applicant : Softhard.IO Ltd. Address : Entrepreneurship Center, Cyberport 3, Core F, 100 Cyberport Road, Hong Kong Manufacturer : Softhard.IO Ltd. Address : Entrepreneurship Center, Cyberport 3, Core F, 100 Cyberport Road, Hong Kong Trade name : Edge Lite Model No. : SHIO-EL-NB FCC ID : 2AVDX-GC474264 EUT Voltage : DC 3.7V Testing Voltage : DC 3.7V Applicable Standard : FCC CFR Title 47 Part 27 Subpart F Test Lab : Hsin Chu Laboratory Address : No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 310, Taiwan, R.O.C. TEL: +886-3-582-8001 / FAX: +886-3-582-8958 Test Result : Complied Documented By : ( Lyla Yang / Engineering Adm. Specialist ) Tested By : ( Max Chang / Senior Engineer ) Approved By : ( Louis Hsu / Deputy Manager ) Report No.: 19C0179R-HPUSP40V00 Page: 3 of 89 Revision History Report No. Version Description Issued Date 19C0179R-HPUSP40V00 V1.0 Initial issue of report May 04, 2020 Report No.: 19C0179R-HPUSP40V00 Page: 4 of 89 TABLE OF CONTENTS Description Page 1. General Information ............................................................................................................. 6 1.1. EUT Description ................................................................................................................... 6 1.2. Mode of Operation ............................................................................................................... 7 1.3. Tested System Details ......................................................................................................... 8 1.4. Configuration of Tested System ........................................................................................... 8 1.5. EUT Exercise Software ........................................................................................................ 8 2. Technical Test ...................................................................................................................... 9 2.1. Summary of Test Result ....................................................................................................... 9 2.2. Test Environment ............................................................................................................... 10 2.3. List of Test Equipment........................................................................................................ 11 2.4. Uncertainty ......................................................................................................................... 14 3. RF Output Power ............................................................................................................... 15 3.1. Test Setup .......................................................................................................................... 15 3.2. Test Procedure ................................................................................................................... 15 3.3. Test Method ....................................................................................................................... 15 3.4. Test Result ......................................................................................................................... 16 4. Occupied Bandwidth .......................................................................................................... 17 4.1. Test Setup .......................................................................................................................... 17 4.2. Test Procedure ................................................................................................................... 17 4.3. Test Method ....................................................................................................................... 17 4.4. Test Result ......................................................................................................................... 18 5. Peak To Average Ratio ...................................................................................................... 27 5.1. Test Setup .......................................................................................................................... 27 5.2. Test Procedure ................................................................................................................... 27 5.3. Test Method ....................................................................................................................... 27 5.4. Limit ................................................................................................................................... 27 5.5. Test Result ......................................................................................................................... 28 6. Spurious Emissions ........................................................................................................... 3 7 6.1. Test Setup .......................................................................................................................... 37 6.2. Test Procedure ................................................................................................................... 38 6.3. Test Method ...................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 19C0179R-HPUSP40V00 Page: 70 of 89 Attachment 1  Test Setup Photograph <Radiated Emission> Description: Front View of Radiated Spurious Emission Test Setup (Horn) Description: Back View of Radiated Spurious Emission Test Setup (Horn)