2AVG9-TEC0XCooling Magnetic Wireless Charger

品名： TECOl-8号风口夹－说明书 版本： 20230722 规格： 100g 双胶纸黑白正反印刷风琴折四折页 制作： 尺寸：85x110 mm 李志敏 料号： Cooling Magnetic Wireless Charger User Manual * Only fits for iPhone 12/13/14 series or smart phones with MagSafe cases. Note: For best perfonnance and safety, please read this manual carefully before using the product. Model: TEC01, TEC02 Wireless Charging Area TYPE-C Input Product Diagram User Instruction 1. Connect the air vent clamp to the device; 1.Unscrew nut 2.Place nut around ball head, insert into socket 3.Tighten nut clockwise 2. Attach clamp to car vent Step 1: Loose the nut to make the hook stretch out the right length 'a and place the hook clip on car's vent 白 Step2: Tighten the nut so that the hook retracts to catch the vent balde until the grip securely locks onto your car's vent — 1 — — 2 — — 3 — 3. Connected Power To Charger Use the Type-C cable packed in the box to connect the device and the car cha r ger . Tips: W hen using this product, please make sure that the product is connected to the power. To achieve fast charging, QC2.0/3.0 car charger is required 4.Charging your iPhone Please fit the product with the back of your iPhone, it will charge your iPhone automatically via the built-in magnetic wireless charging, Max to be lOW. f 女 今,._,--夺 p \归， 主 ,.]! ,�, \ ; : ,II l 丿 ～ l ~ ～ ～ l } 、 , μ \ 5 ` Note: *Under normal charging conditions, the charger and mobile phone could be slightly hot; the temperature may rise if the mobile phone is working while charging ( such as playingvideo) *Please stop charging your phone when the charger is over-heating. Our product will automatically stop charging when over-heating. Please try it again when it's cooling down. ． Precautions心 • Please carefully handle your charger and accessories, the following recommendations will help you effectively use the warranty service. • Please keep the equipment dry. Rain, moisture and various liquid may contain minerals that will corrode the circuit. If the equipment is wet, please dry the product as soon as possible or use a soft cloth to wipe it clean.losing the data stored due to emagnetization. • W hen charging, please select the regular 5V/2A, 9V/2A chargers. Do not use any damaged chargers. • Please do not attempt to charge the equipment with exposed or case broken, and do not charge the equipment that are incompatible with this product. • Do not store the equipment in a cold place. Otherwise, if temperature rises to normal temperatu『e,moisture will pent up inside it and damage the electric appliance. • Do not attempt to open the equipment, unauthorized dis-assembly or modification will damage equipment or related wireless charging functions. • Do not throw, tap or shake the equipment; rough handling of the equipment will damage the internal circuit board and the mechanical structure • Use the clean and moist soft cloth to clean the surface of the equipment. Do not use or store the equipment in dustyor dlrty places. • Some components of this product are magnetic and metal materials may be adsorbed onto this product. Please do not use bank cards, credit cards or any other items with magnetic near the product so as to avoid losing the data stored due to demagnetization. Fits Below Supports (Not Included) Ball Diameter: 16.8士0.3mm Specifications: Input 5V/3A, 9V/2.22A Wireless Output (SW) , (7 .5 W) , ( l OW) Charging Efficiency ;;,.so% Product Size (2l 58.5'43.8 mm In the box: 一立 厂气巠． 勹 � ;)]; ';; , 二 : y 芘 ／ 天 -- - -- User manual Xl Charger Xl AirVentClamp Xl USB-Atolype-C Cable Xl �(("'HS 凸三 This device complies with Part 15 of the FCC Rules. Operation is subject lo the following two conditions: (l)This device may not cause harmful interference (2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note:This equipment has been tested and found to comply with the I而itsfor a class B digital dev,ce,pursuanl lo Part 15 of the FCC Rules. These limits are designed lo provide reasonable protection against harmful interference in a residential installation This equipmenf generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the 1nslructions,may cause harmful interference to radio communications.However,lhere is no guarantee Iha! interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of 1he following measures ·Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an autlet on a circuit different from that to which the receiver is con nected. • Consult the dealer o『 an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure req uirement,This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and y our body. 4 5 6 7 Made in China FCC Statement

Shenzhen Yostand Technology Co., Ltd. 2023-08-31 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2AVG9-TEC0X ) [Shenzhen Yostand Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of theFCC rules. Sincerely, Joy Zhang Vice President Shenzhen Yostand Technology Co., Ltd. Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District, Shenzhen, Guangdong, China Shenzhen Yostand Technology Co., Ltd. 2023-08-31 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for(FCC ID: 2AVG9-TEC0X ) [Shenzhen Yostand Technology Co., Ltd. ] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Joy Zhang Vice President Shenzhen Yostand Technology Co., Ltd. Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District, Shenzhen, Guangdong, China

Attestation Statements (2023-9-1) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID: 2AVG9-TECOX， Grantee FRN: 0029070554) (Shenzhen Yostand Technology Co., Ltd.), the undersigned, hereby authorize (Lucky Cowboy Global Services, LLC) to act as our designated U.S. agent for service of process,( Shenzhen Yostand Technology Co., Ltd.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (Lucky Cowboy Global Services, LLC) accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information： Company name: Shenzhen Yostand Technology Co., Ltd. Contact Name: Joy Zhang Address: Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community,Yutang Street, Guangming District, Shenzhen，Guangdong, China Telephone No: +86755 23693752 Email: [email protected] Signature [Joy Zhang] U.S. Agent Information: Company Name: Lucky Cowboy Global Services, LLC Address: 2213 S. Braeswood Blvd. #12E Houston, TX 77030 USA FRN: 0033510934 Contact Name: Louie Liu Telephone No: +1 (713) 992-3369 Email: [email protected] Signature [Louie Liu]

Discrepancydeclaration Date:2023-08-31 OurcompanystatesthatthemainmodelofourproductsisTEC01, andTEC02isseriesmodel.Theseriesmodelisconsistentwiththemain modelinRFmodule,antenna,PCBlayout,schematicsanduseof components,themaindifferencesarethemodelnameandappearance.In appearance,theTEC02hasonelessplasticbasecomparedtotheTEC01, andtherestarethesame. Sincerely, Signature: Contactname:JoyZhang Contactcompany:ShenzhenYostandTechnologyCo.,Ltd. Address:Room701,Building1,JiuzhouIndustrialPark,No.10,19th TongguanRoad,TianliaoCommunity,YutangStreet,GuangmingDistrict, Shenzhen,Guangdong,China

Shenzhen Yostand Technology Co., Ltd. 2023-08-31 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorizeDongGuan Anci Electronic Technology Co., Ltd.to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Joy Zhang Vice President Shenzhen Yostand Technology Co., Ltd. Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District, Shenzhen, Guangdong, China

Shenzhen Yostand Technology Co., Ltd. 2023-08-31 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (EUT Name: Cooling Magnetic Wireless Charger /Model: TEC01, TEC02 /FCC ID: 2AVG9-TEC0X) To Whom It May Concern: This letter serves as an official request for confidentiality under sections0.457 and 0.459 of CFR 47. We have requested that the(Block Diagram ,Operational Description,Schematics) required to be submitted with this application be permanentlywithheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Joy Zhang Vice President Shenzhen Yostand Technology Co., Ltd. Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District, Shenzhen, Guangdong, China

ShenzhenYostandTechnologyCo.,Ltd. 2023/07/18 To:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD FCCID:2AVG9-TEC0X ToWhomItMayConcern: Thisletteristoascertainthat,Product: TEC01 hasbeentheunitsusedfor conductingFCCcompliancetesting,anditmeets680106D01RFExposure WirelessChargingAppv03Clause5(b)all6conditions. 1Powertransferfrequencyislessthat1MHz Reply ： Yes,Powertransferfrequencyislessthat1MHz; 2Outputpowerfromeachprimarycoilislessthanorequalto15watts. Reply： Yes,Outputpowerfromeachprimarycoilislessthanorequalto15watts. Themaxoutputpoweris10W. 3Thetransfersystemincludesonlysingleprimaryandsecondarycoils.This includeschargingsystemsthatmayhavemultipleprimarycoilsandclients thatareabletodetectandallowcouplingonlybetweenindividualpairsof coils. Reply ： No,EUThasonlyonecoil. 4Clientdeviceisplaceddirectlyincontactwiththetransmitter. Reply ： Yes,Theclientdeviceneedstobeincontactwiththetransmitterbase,and thecontactdistanceislessthan10mm. 5 Mobileexposureconditionsonly(portableexposureconditionsarenot coveredbythisexclusion). Reply ： Yes,EUTismobiledevice 6TheaggregateH-fieldstrengthsat15cmsurroundingthedeviceand20cm abovethetopsurfacefromallsimultaneoustransmittingcoilsare demonstratedtobelessthan50%oftheMPElimit. Reply ： Yes,RFExposureEvaluationreporttestresultmeetsthisLimt.Pleaserefer totheRFexposureEvaluationreport. Ifyouhaveanyquestionorconcerns,pls.contactus. Sincerely, JoyZhang Manager ShenzhenYostandTechnologyCo.,Ltd. Room701,Building1,JiuzhouIndustrialPark,No.10,19thTongguanRoad,TianliaoCommunity, YutangStreet,GuangmingDistrict,Shenzhen,Guangdong,China

External-1 TEC01 External-2 TEC01 External-3 TEC01 External-4 TEC01 External-5 TEC01 External-6 TEC01 External-7 TEC01 External-8 TEC02 External-9 TEC02 External-10 TEC02 External-11 TEC02 External-12 TEC02 External-13 TEC02 External-14 TEC02

Internal-1 Internal-2 Internal-3 Internal-4 Internal-5 Internal-6

1 / 9 EUTSpecification FCCID:2AVG9-TEC0X CharacteristicsDescription ProductNameCoolingMagneticWirelessCharger ModelnumberTEC01,TEC02 PowerSupplyDC5V/DC9V OperatingFrequency Range 110-205KHz Modulation Technique ASK AntennaTypeCoilAntenna DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others___ Exposure classification Occupational/Controlledexposure(S=5mW/cm2) GeneralPopulation/Uncontrolledexposure (S=1mW/cm2) AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity EvaluationappliedMPEEvaluation SAREvaluation ApplicableStandard: FCCPart1(1.1310),Part2(2.1091)andKDB680106D01RFExposure WirelessChargingAppsv03 ApplicableRequirement: ThreedifferentcategoriesoftransmittersaredefinedbytheFCCinOET Bulletin65. Thesecategoriesarefixedinstallation,mobile,andportableandare 2 / 9 definedasfollows: FixedInstallations:fixedlocationmeansthatthedevice,includingits antenna,isphysicallysecuredatapermanentlocationandisnotabletobe easilymovedtoanotherlocation.Additionally,distancetohumansfromthe antennaismaintainedtoatleast2meters. MobileDevices:amobiledeviceisdefinedasatransmittingdevice designedtobeusedinotherthanfixedlocationsandtobegenerallyusedin suchawaythataseparationdistanceofatleast20centimetersisnormally maintainedbetweenthetransmitter'sradiatingstructuresandthebodyofthe userornearbypersons.Transmittersdesignedtobeusedbyconsumersor workersthatcanbeeasilyre-located,suchasawirelessmodemoperatingina laptopcomputer,areconsideredmobiledevicesiftheymeetthe20centimeter separationrequirement.TheFCCrulesforevaluatingmobiledevicesforRF compliancearefoundin47CFR§2.1091. PortableDevices:aportabledeviceisdefinedasatransmittingdevice designedtobeusedsothattheradiatingstructure(s)ofthedeviceis/arewithin 20centimetersofthebodyoftheuser.Portabledevicerequirementsarefound inSection2.1093oftheFCC'sRules(47CFR§2.1093). TheFCCalsocategorizestheuseofthedeviceasbasedupontheuser’s awarenessandabilitytoexercisecontroloverhisorherexposure.Thetwo categoriesdefinedareOccupational/ControlledExposureandGeneral Population/UncontrolledExposure. Thesetwocategoriesaredefinedasfollows: Occupational/controlledexposurelimitsapplyinsituationsinwhich personsareexposedasaconsequenceoftheiremploymentprovidedthose personsarefullyawareofthepotentialforexposureandcanexercisecontrol overtheirexposure.Limitsforoccupational/controlledexposurealsoapplyin situationswhenapersonistransientthroughalocationwhere occupational/controlledlimitsapplyprovidedheorsheismadeawareofthe potentialforexposure.Thephrasefullyawareinthecontextofapplyingthese exposurelimitsmeansthatanexposedpersonhasreceivedwrittenand/or verbalinformationfullyexplainingthepotentialforRFexposureresultingfrom hisorheremployment.Withtheexceptionoftransientpersons,thisphrase alsomeansthatanexposedpersonhasreceivedappropriatetraining regardingworkpracticesrelatingtocontrollingormitigatinghisorher exposure.Suchtrainingisnotrequiredfortransientpersons,buttheymust receivewrittenand/orverbalinformationandnotification(forexample,using signs)concerningtheirexposurepotentialandappropriatemeansavailableto mitigatetheirexposure.Thephraseexercisecontrolmeansthatanexposed personisallowedtoandknowshowtoreduceoravoidexposureby administrativeorengineeringcontrolsandworkpractices,suchasuseof personalprotectiveequipmentortimeaveragingofexposure. Generalpopulation/uncontrolledexposurelimitsapplyinsituationsin whichthegeneralpublicmaybeexposed,orinwhichpersonswhoare 3 / 9 exposedasaconsequenceoftheiremploymentmaynotbefullyawareofthe potentialforexposureorcannotexercisecontrolovertheirexposure. Licenseesandapplicantsareresponsibleforcompliancewithboththe occupational/controlledexposurelimitsandthegeneral population/uncontrolledexposurelimitsastheyapplytotransmittersunder theirjurisdiction.Licenseesandapplicantsshouldbeawarethatthe occupational/controlledexposurelimitsapplyespeciallyinsituationswhere workersmayhaveaccesstoareasinverycloseproximitytoantennasand accesstothegeneralpublicmayberestricted. Inlieuofevaluationwiththegeneralpopulation/uncontrolledexposure limits,amateurlicenseesauthorizedunderpart97ofthischapterand membersofhisorherimmediatehouseholdmaybeevaluatedwithrespectto theoccupational/controlledexposurelimitsinthissection,provided appropriatetrainingandinformationhasbeenprovidedtotheamateur licenseeandmembersofhis/herhousehold.Othernearbypersonswhoare notmembersoftheamateurlicensee'shouseholdmustbeevaluatedwith respecttothegeneralpopulation/uncontrolledexposurelimits. TestSetupBlock 4 / 9 TestProcedure 1.ConnecttheEUTandequipmentasabovediagramoftestconfiguration. 2.EUTwasplacedonatable,andthemeasureprobewasplacedata measurementdistanceof15cmfromtheEUTtothecenteroftheprobe. 3.Poweronthemeasuringprobe,theEUTwassetatthemaximumfield strengthemissionstate. 4.TheEUTwasputindifferentdirections(Left,Right,Front,Rear,Topand Bottom)towardtothemeasureprobe.ThedistancefromthetopoftheEUTto theprobeis20CM,andthedistancefromotherdirectionsis15cm.Measure thevalueoffieldstrength. 5.Recordtheworstdataofthedifferentdirections. MeasuringDeviceAndTestEquipment UsedEquipmentManufacturerModelNo.SerialNo.LastCal.Cal.Interval  E&H-Field Probe(9kHz-30M Hz) NardaEHP-200A180ZX11012Oct.28,20231Year 5 / 9 DescriptionofSupportDevice iPhone：Manufacturer:AppleInc. M/N:A2176 S/N:N/A Adapter：Modelnumber:580245A087 Input:AC100-240V,50/60Hz SAMSUNGS9: Manufacturer:SAMSUNG M/N:SamsungGalaxyS9 S/N:N/A Xiaomi9 ：Manufacturer:Xiaomi M/N:Xiaomi9 S/N:N/A LimitsforMaximumPermissibleExposure(MPE) MeasurementResult Wetestedthreemodes(10Wload,7.5Wload,5Wload)forEUT.testdataseethefollowing. 6 / 9 MagneticField(H-Field)strengthat15cmfromtheboundariesofEUT,and 20cmfromthetop. TestMode:WirelessCharging10W Measuring Distance(cm) E- Field(V/ m) 50% E- Field(V/ m) Limit(V/ m) 50% Limit(V/m) MeasurementPoint1Front156.39423.1972 614307 MeasurementPoint2 Back 15 6.3844 3.1928 MeasurementPoint3Left156.36563.1822 MeasurementPoint4 Right 15 6.3862 3.1934 MeasurementPoint5Bottom156.37643.1886 MeasurementP…

Text truncated - open the document above for the full version.

FinePage1of4 承認書 SPECIFICATIONFORAPPROVAL 客戶： CUSTOMER: 深圳市一讯达科技有限公司 ShenzhenYostandTechnologyCo.,Ltd 客戶料號： CUSTP/N: 10.0110.1719 料號： FINEP/N: G4511-6.8UH单线圈0.08*24P*2*10TS G4511-6.8UHSinglecoil0.08*24P*2*10TS 産品型號： DESC: Φ 43.5MMX5.0MMX0.8MM 开槽 Φ 43.5MMX5.0MMX0.8MMnotching 日期： DATE: 2023/05/25 版本： Version: A.0 擬制 PREPAREDBY 審核 CHECKEDBY 批准 APPROVEDBY 客戶承認 CUSTOMERAPPROVE 黄燕铭黄东明黄锦华 东莞市西联干城科技有限公司 DongguanXilianGanchengTechnologyCo.,Ltd. 工廠地址：东莞市东坑镇骏发路 123 号三甲高新技术产业园 2 栋 8 楼 Factoryaddress:8thFloor,Building2,SanjiaHigh-techIndustrialPark,No.123JunfaRoad, DongkengTown,DongguanCity TEL ： 0769-82989159 FAX ： 0769-82989159 E-mail ： [email protected] FinePage2of4 版本變更履歷 VersionChangeHistory 版本 Rev. 變更前 BeforeChange 變更後 AfterChange 更改日期 ChangeDate 批准 ApprovedBy A.0 新发行 ----2023/05/25黄锦华 FinePage3of4 SPECIFICATION 産品型號： DESC Φ20.5x40-6.8uH-0.08x24P-10mm 版本 Rev：A.0 客戶CUST: XXX 客户料号CUSTP/N: 一、尺寸DIMENSION:(mm) 二、 二、原理图SCHEMATICDIAGRAM: A 43.4±0.3 B 38±1.0 C 20±0.5 D 10±2 E 3±1 K 0.75±0.03 注： 1.交叉出线; 2.出线位置缠9mm(ref)宽度高温胶纸1-2Ts; 3.线圈贴圆形硬磁片带槽，磁片尺寸 43.4±0.3mm,内孔5.2mm,厚度为0.8±0.2mm。 4.线圈中间加贴直径20MM0.75MM厚硬磁片 Note: 1.Crossoutwire; 2.Wrap9mm(ref)widthhigh-temperature adhesivepaper1-2Tsaroundtheoutletposition; 3.Thecoilisattachedtothecircularhard magneticdiscwithgroove,themagneticdisc sizeis43.4±0.3mm,theinnerholeis5.2mm, andthethicknessis0.8±0.2mm. 4.Attachaharddiskwithadiameterof 20MM0.75MMinthemiddleofthecoil FinePage4of4 三、绕线参数WindingSpecification: 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 WindingDirection 1SF丝包线0.08*24PX2 Silk-coveredwire0.08*24PX2 10TsCCW 四、电气特性ELECTRICALCHARACTERISTICS: 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS 1IND.S-F3.8 u H±20%单独线圈 3.8uH±20%individualcoil 100KHz/1.0VLCZMETER1062B 2IND.S-F6.8 u H±10%加磁片 6.8 u H±10%plusMagnetic sheet 100KHz/1.0VLCZMETER1062B 3DCRS-F≤75mΩ100KHz/1.0VLCZMETER502B 4QS-F≥49100KHz/1.0VLCZMETER502B 擬制/日期PREPAREDBY/DATE審核/日期CHECKEDBY/DATE 黄燕铭2023/05/25黄锦华2023/05/25

TRF No.: 01-R005-3A TRF Originator: GTG TRF Date: 2022-06-29 Web: www.gtggroup.com E-mail: [email protected] Tel.: 86-400 755 8988 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Cooling Magnetic Wireless Charger Model No.: TEC01, TEC02 Trademark: YOSTAND FCC ID: 2AVG9-TEC0X Report No.: E01A23060795F00301 Issue Date: July 18, 2023 Prepared for Shenzhen Yostand Technology Co., Ltd. Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District, Shenzhen, Guangdong, China Prepared by Dong Guan Anci Electronic Technology Co., Ltd. 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan, Lake Hi-tech Industrial Development Zone, Dongguan City, Guangdong Pr., China. This report shall not be reproduced, except in full, without the written approval of Dong Guan Anci Electronic Technology Co., Ltd. Page 1 of 38 Report No.: E01A23060795F00301 TRF No.: 01-R005-3A Global Testing , Great Quality. VERIFICATION OF COMPLIANCE Applicant: Shenzhen Yostand Technology Co., Ltd. Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District,Shenzhen, Guangdong, China Manufacturer: Shenzhen Yostand Technology Co., Ltd. Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District,Shenzhen, Guangdong, China Factory: Shenzhen Yostand Technology Co., Ltd. Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District,Shenzhen, Guangdong, China Product Description: Cooling Magnetic Wireless Charger Trade Mark: YOSTAND Model Number: TEC01, TEC02 We hereby certify that: The above equipment was tested by Dong Guan Anci Electronic Technology Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.209(2022). Date of Test : July 4, 2023 to July 26, 2023 Prepared by : Dyson Dai/Editor Reviewer & Authorized Signer : Tiger Xu/ Supervisor Page 2 of 38 Report No.: E01A23060795F00301 TRF No.: 01-R005-3A Global Testing , Great Quality. Modified Information Version Summary Revision Date Report No. Ver.1.0 Original Report / E01A23060795F00301 Page 3 of 38 Report No.: E01A23060795F00301 TRF No.: 01-R005-3A Global Testing , Great Quality. Table of Contents 1 GENERAL INFORMATION .................................................................................................................................. 4 1.1 PRODUCT DESCRIPTION .................................................................................................................................... 4 1.2 RELATED SUBMITTAL(S) / GRANT(S) ................................................................................................................. 5 1.3 TEST METHODOLOGY ........................................................................................................................................ 5 1.4 SPECIAL ACCESSORIES ..................................................................................................................................... 5 1.5 EQUIPMENT MODIFICATIONS ............................................................................................................................. 5 1.6 TEST FACILITY .................................................................................................................................................... 5 2 SYSTEM TEST CONFIGURATION ..................................................................................................................... 6 2.1 EUT CONFIGURATION ....................................................................................................................................... 6 2.2 EUT EXERCISE .................................................................................................................................................. 6 2.3 TEST PROCEDURE ............................................................................................................................................. 6 2.4 CONFIGURATION OF TESTED SYSTEM ............................................................................................................... 7 3 SUMMARY OF TEST RESULTS ......................................................................................................................... 7 4 TEST SYSTEM UNCERTAINTY .......................................................................................................................... 8 5 CONDUCTED EMISSIONS TEST ....................................................................................................................... 9 5.1 MEASUREMENT PROCEDURE ............................................................................................................................ 9 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................................... 9 5.3 MEASUREMENT EQUIPMENT USED .................................................................................................................... 9 5.4 CONDUCTED EMISSION LIMIT ............................................................................................................................ 9 5.5 MEASUREMENT RESULT .................................................................................................................................. 10 5.6 CONDUCTED MEASUREMENT PHOTO .............................................................................................................. 13 6 RADIATED EMISSION TEST....................................................................…

Text truncated - open the document above for the full version.

1.1 Radiated Measurement Photos 9kHz-30MHz 30MHz-1GHz