
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Operation 1. Check that the Power Cord / Controller is connected to the String Lights then connect to 120 VAC outlet. 2. Use the Remote Control to turn the lights on/off. Also use it to select color and mode changes. 3. On the Remote Control, remove the pull- out Tab to activate the battery. 4. Point the Remote Control at Controller and press selection buttons as desired. Pull out Tab to activate battery. Back of Remote Control ButtonSelection 1ON: Turns lights on. 2 OFF: Turns lights off. 3 BRIGHTNESS: Press ▲ / ▼ to choose brightness level (only works in single color mode). 4 SPEED: Press – / + to decrease or increase color changing speed (only works in color combination mode). 5 MODE: Press to select a color combination. 6 RED: Press to change light color to red. 7 GREEN: Press to change light color to green. 8 BLUE: Press to change light color to blue. 9 WHITE: Press to change light color to white. 1 2 3 4 5 6 7 8 9 Programming and Resetting the Remote Control 1. Reset the Remote Control if it is not working properly or has been replaced. 2. To Reset, turn power OFF by unplugging the Power Cord / Controller. 3. Press and hold the Remote Control’s ON button. 4. While holding down the ON button, plug power cord back into the outlet and point the Remote Control at the Controller. 5. The String Light’s bulbs should flash 3 times signifying the Remote Control has been successfully reprogrammed. 6. Release the On button. FCC Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
QA-FR-170-B Company: Haining Weilai Lighting Co.,Ltd. Add: 2F,No.23, Shuangxue Road, Economic development Zone, Haining, Zhejiang, China Tel: 0573-87266917 Fax: 0573-8726 6358 E-mail:[email protected] FCC Authorization Date: 2019-12-19 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Haining Weilai Lighting Co.,Ltd. the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Typed or Printed Name: Vivian Fang Title: GM Assistant
Company: Haining Weilai Lightin g Co.,Ltd. Add: 2F,No.23, Shuangxue Road, Economic development Zone, Haining, Zhejiang, China Tel: 0573-87266917 Fax: 0573-87266358 E-mail:vivian@zjfu tureled.com FCC Confidential Authorization Date: 2019-12-19 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AVHF-R001 To : whom it may concern, In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Haining Weilai Lighting Co.,Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Typed or Printed Name: Vivian Fang Title: GM Assistant
EXHIBIT A - EUT EXTERNAL PHOTOGRAPHS
Model name: WL-R001 FCC ID: 2AVHF-R001 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EXHIBIT B - EUT INTERNAL PHOTOGRAPHS SRD Antenna
Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.231 TEST REPORT For Haining Weilai Lighting Co.,Ltd. 2F, No.23, Shuangxue Road, Economic development Zone, Haining, Zhejiang, China FCC ID: 2AVHF-R001 Report Type: Original Report Product Type: LED String light Test Engineer: Winnie Yang Report Number: RSHB191219002-00A Report Date: 2019-12-31 Reviewed By: Oscar Ye EMC Manager Prepared By: Bay Area Compliance Laboratories Corp. (Kunshan) No.248 Chenghu Road, Kunshan, Jiangsu province, China Tel: +86-0512-86175000 Fax: +86-0512-88934268 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RSHB191219002-00A FCC Part 15.231 Page 2 of 18 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 3 TEST METHODOLOGY .................................................................................................................................................. 3 MEASUREMENT UNCERTAINTY .................................................................................................................................... 4 TEST FACILITY ............................................................................................................................................................. 4 SYSTEM TEST CONFIGURATION .......................................................................................................................... 5 JUSTIFICATION ............................................................................................................................................................. 5 EUT EXERCISE SOFTWARE .......................................................................................................................................... 5 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 5 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 5 EXTERNAL I/O CABLE .................................................................................................................................................. 5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 6 SUMMARY OF TEST RESULTS ............................................................................................................................... 7 TEST EQUIPMENT LIST ........................................................................................................................................... 8 FCC§15.203 - ANTENNA REQUIREMENT .............................................................................................................. 9 APPLICABLE STANDARD .............................................................................................................................................. 9 ANTENNA CONNECTED CONSTRUCTION ...................................................................................................................... 9 FCC §15.205, §15.209, §15.231 (B) - RADIATED EMISSIONS ............................................................................. 10 APPLICABLE STANDARD ............................................................................................................................................ 10 EUT SETUP ................................................................................................................................................................ 11 EMI TEST RECEIVER SETUP ....................................................................................................................................... 12 TEST PROCEDURE ...................................................................................................................................................... 12 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 12 TEST RESULTS SUMMARY .......................................................................................................................................... 12 TEST DATA ................................................................................................................................................................ 12 FCC §15.231(A) (1) - DEACTIVATION TESTING ................................................................................................. 15 APPLICABLE STANDARD ............................................................................................................................................ 15 TEST PROCEDURE ...................................................................................................................................................... 15 TEST DATA ................................................................................................................................................................ 15 FCC §15.231(C)…
Text truncated - open the document above for the full version.
EXHIBIT C - TEST SETUP PHOTOGRAPHS Radiated Emissions (Below 1GHz) Radiated Emissions (Above 1GHz)
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15.231 | 433.92 MHz - 433.92 MHz | - |