2AVL7QBX1Stealth Wireless Charger

Stealth Wireless Charger User Manual This product is designed for charging mobile phones through a surface of 15-30mm thickness. It is compatible with all Qi standard mobile phones. It can charge through any non-metal surface, such as wood, plastic, glass, and granite, etc. and support fast charging. Packing List 1. Wireless charger ×1 2. U-shaped tray×1 3. Power adapter×1 4. Desktop sticker×1 5. Movable magnet×1 6. U-shaped cardboard with fixed magnet×1 7. Cable clips×3 8. Screws×2 9. Manual & warranty card×1 Installation Instructions Accessory Descriptions Installation Steps 1. Align the center of the desktop sticker with the center of the U-shaped cardboard by using the two magnets. 2. Tear off the paper on the surface of the U-shaped cardboard. Align and stick the U-shaped tray to the lower surface of the desk. 3． Remove the U-shaped cardboard and insert the wireless charger into the U-shaped tray. (Screws are optional.) 4． Switch on power and place the mobile phone on the top of the desktop sticker to start wireless charging. (Cable clips are optional.) System Parameters 1. Model：QB01 Wireless Charger 2. Dimension：154mm×110mm×10mm 3. Net Weight：0.167kg 4. Color：Black 5. Frame Material：ABS+PC 6. Input Voltage/Current：19V/0.94A 7. Output Power：10W（Max） 8. Valid Charging Distance：15mm-30mm 9. Horizontal Tolerance：±15mm 10. Protection: FOD, OTP, OVP 11. Charging Mode: Compatible with Qi-BPP, iPhone and Samsung fast charging 12. Product Certification: CNAS/CE/FCC/ROHS Tips 1． The charger will stop automatically when a metal or other foreign object is in the charging area. Remove the object to continue charging. 2． If charging is stopped with unknown reason, just move the mobile phone away and then place it back in the charging area. 3． LED indicator instructions: Notes 1． Please install according to the instructions to ensure the proper operation of the charger. 2． Please do not install on the metal desk. 3． Do not place any metal objects, including ID card, bank card, bus pass and other digital IC cards, in the charging area. 4． To avoid damage, please do not place the device in a wet, hot or cold environment. 5． Please do not place the device directly under the sunlight or close to any heating equipment such as microwave oven, roaster and water heater. 6． Do not disassemble the device or place it in any liquid to avoid damage and/or electrification. 7． Do not toss, press or puncture the device. High external pressure will cause damage to the device. 8． Please keep the charging area clean for best charging efficiency. 9． The device’s electromagnetic effect might interfere with some implanted medical devices, such as pacemaker, cochlear implant and hearing-aid. Please consult the manufactures if you use such implants. 10． Please follow the local recycling guidelines when discarding this product. Blue light breathing Standby Blue light always on Working Red light twinkle Foreign object is detected or phone is too close to the charger./Remove the foreign object or keep mobile phone in the right range. 11． Please keep the device and accessories out of the reach of children. 12． For best performance, please use the accompanied power adapter. Service and Warranty 1． The warranty is governed by the laws of the country in which the product is purchased. 2． This product is warranted for one year from the date of purchase. Failure to provide proof of purchase may void the warranty. 3． During the warranty period, free service will be provided in case of product malfunction. 4． Warranty does not apply to the following cases: a) Damage caused by the user; b) Beyond the warranty period; c) Without warranty card or valid invoice or other proof of purchase; d) Product model is inconsistent with the warranty card or the warranty card is modified. e) Damage due to mishandling during product usage or maintenance. f) Damage caused by disassembling or breaking the product, or soaking the product in liquid. g) Damage caused by events of force majeure. Manufacturer: Shenzhen Yaoyuan Tech Co., Ltd. Add: No 908,Building D, Galaxy World 2th, Wuhe Ave, Longgang District, Shenzhen, Guangdong, China 518116 Tel: +86-755-84658719 Email：[email protected] Website：www.magcharging.com WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Warranty Card Dear Customer, Thanks for purchasing our product of Magcharging. Pl…

Text truncated - open the document above for the full version.

External Photos ALL VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT VIEW OF EUT(PORT)

FCC ID Label Location FCC ID: 2AVL7QBX1

Internal Photos OPEN VIEW-1 OF EUT OPEN VIEW-2 OF EUT OPEN VIEW-3 OF EUT OPEN VIEW-4 OF EUT Antenna INTERNAL VIEW-1 OF EUT INTERNAL VIEW-2 OF EUT INTERNAL VIEW-3 OF EUT

SHENZHEN CIJI TECHNOLOGY CO., LTD. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: QB01, QB11, QB21, QB31, QB41, QB51 FCC ID: 2AVL7QBX1 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for internal antenna type(s) described below: Type of antenna: Integrated Antenna Gain of the antenna: 0 dBi Frequency range: 126.3kHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: SHENZHEN CIJI TECHNOLOGY CO.,LTD. Address: Room 1807, Overseas Chinese Scholars Venture Building, No.29 Gaoxin South Ring Road, Nanshan District, Shenzhen, China, 518057 Place: Shenzhen Date: 2020-01-18 Signature:

Page 1 of14 RF Exposure Report Report No.: AGC07487190301FH03 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Stealth Wireless Charger BRAND NAME : CIJI MODEL NAME : QB01, QB11, QB21, QB31, QB41, QB51 APPLICANT : SHENZHEN CIJI TECHNOLOGY CO., LTD. DATE OF ISSUE : Jan. 15, 2020 STANDARD(S) : KDB680106 D01 RF Exposure Wireless Charging Base App v03 REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC07487190301FH03 Page 2 of14 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jan. 15, 2020 Valid Initial Release Report No.: AGC07487190301FH03 Page 3 of14 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY ............................................................................................................... 4 2. GENERAL INFORMATION ............................................................................................................................ 5 2.1. PRODUCT DESCRIPTION ..................................................................................................................... 5 3. DESCRIPTION OF TEST MODES................................................................................................................. 6 4. SYSTEM TEST CONFIGURATION ............................................................................................................... 6 5. TEST FACILITY ............................................................................................................................................. 7 6. RADIO FREQUENCY (RF) EXPOSURE TEST ............................................................................................. 8 6.1. LIMITS ..................................................................................................................................................... 8 6.2. TEST SETUP ........................................................................................................................................... 8 APPENDIX A: PHOTOGRAPHS OF TEST SETUP ......................................................................................... 11 Report No.: AGC07487190301FH03 Page 4 of14 1. VERIFICATION OF CONFORMITY Applicant SHENZHEN CIJI TECHNOLOGY CO.,LTD. Address Room 1807, Overseas Chinese Scholars Venture Building, No.29 Gaoxin South Ring Road, Nanshan District, Shenzhen, China, 518057 Manufacturer SHENZHEN CIJI TECHNOLOGY CO.,LTD. Address Room 1807, Overseas Chinese Scholars Venture Building, No.29 Gaoxin South Ring Road, Nanshan District, Shenzhen, China, 518057 Factory SHENZHEN CIJI TECHNOLOGY CO.,LTD. Address Room 1807, Overseas Chinese Scholars Venture Building, No.29 Gaoxin South Ring Road, Nanshan District, Shenzhen, China, 518057 Product Designation Stealth Wireless Charger Brand Name CIJI Test Model: QB01 Series Model QB11, QB21, QB31, QB41, QB51 Model Difference All the same except for the model name and front appearance Date of test Jan. 13, 2020 to Jan. 15, 2020 Deviation None Condition of Test Sample Normal Report Template AGCRT-US-BR/RF We hereby certify that: The above equipment was tested by Attestation of Global Compliance(Shenzhen) Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in KDB680106 D01. The results of testing in this report apply to the product/system which was tested only. Prepared By Sky Dong (Project Engineer) Jan. 15, 2020 Reviewed By Max Zhang (Reviewer) Jan. 15, 2020 Approved By Forrest Lei (Authorized Officer) Jan. 15, 2020 Report No.: AGC07487190301FH03 Page 5 of14 2. GENERAL INFORMATION 2.1.PRODUCT DESCRIPTION A major technical description of EUT is described as following Operation Frequency 110-205 kHz Test Frequency 126.3kHz Maximum field strength 53.14dBuV/m(PK)@3m Number of channels 1 Antenna Designation Integrated Antenna (Met 15.203 Antenna requirement) Hardware Version 2.1 Software Version 4.4.1 Power Supply DC 19V by adapter Report No.: AGC07487190301FH03 Page 6 of14 3. DESCRIPTION OF TEST MODES NO. TEST MODE DESCRIPTION 1 Wireless charging Mode(Full load) 2 Wireless charging Mode(Half load) 3 Wireless charging Mode(Null load) Note: 1. The mode 1 was the worst case and only the data of the worst case record in this report. 4. SYSTEM TEST CONFIGURATION Item Equipment Model No. ID or Specification Remark 1 Qi wirelesss charger MCWCUN0035BL 2AVL7QBX1 EUT 2 Adapter DYS618-19094W-1 DC 19V/0.94A Marketed 3 Wireless Load N/A 10W Support Report No.: AGC07487190301FH03 Page 7 of14 5. TEST FACILITY TEST EQUIPMENT LIST Description Manufacturer Model S/N Cal. Date Cal. Due Broadband Field Meter Narda Safety Test Solutions GmbH NBM-550 J-0004 Jun.12,2019 Jun.11,2020 Probe FHP Narda Safety Test Solutions GmbH EHP-50F J-0015 Jun.12,2019 Jun.11,2020 TestSite Attestation of Global Compliance(Shenzhen) Co., Ltd Location 1-2/F,Building19,JunfengIndustrialPark,ChongqingRoad,HepingCommunity,FuhaiSt reet,Bao'anDistrict,Shenzhen,Guangdong,China Designation Number CN1259 FCC Test Firm Registration Number 975832 A2LA Cert. No. 5054.02 Description Attestation of Global Compliance(Shenzhen) Co., Ltd is accredited by A2LA Report No.: AGC07487190301FH03 Page 8 of14 6. RADIO FREQUENCY(RF) EXPOSURETEST 6.1. LIMITS For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of 15 cm. E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.…

Text truncated - open the document above for the full version.

Page 1 of 31 FCC Test Report Report No.: AGC07487190301FE03 FCC ID : 2AVL7QBX1 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Stealth Wireless Charger BRAND NAME : CIJI MODEL NAME : QB01, QB11, QB21, QB31, QB41, QB51 APPLICANT : SHENZHEN CIJI TECHNOLOGY CO., LTD. DATE OF ISSUE : Jan. 15, 2020 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15 Rules REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC07487190301FE03 Page 2 of 31 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jan. 15, 2020 Valid Initial Release Report No.: AGC07487190301FE03 Page 3 of 31 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY ............................................................................................................... 4 2. GENERAL INFORMATION ............................................................................................................................ 5 2.1. PRODUCT DESCRIPTION ..................................................................................................................... 5 3. MEASUREMENT UNCERTAINTY ................................................................................................................. 6 4. DESCRIPTION OF TEST MODES ................................................................................................................. 7 5. SYSTEM TEST CONFIGURATION ............................................................................................................... 8 5.1. CONFIGURATION OF EUT SYSTEM ..................................................................................................... 8 5.2. EQUIPMENT USED IN EUT SYSTEM ..................................................................................................... 8 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 8 6. TEST FACILITY ............................................................................................................................................. 9 7. RADIATED EMISSION ................................................................................................................................. 10 7.1TEST LIMIT ............................................................................................................................................. 10 7.2. MEASUREMENT PROCEDURE ............................................................................................................ 11 7.3. TEST SETUP ......................................................................................................................................... 12 7.4. TEST RESULT ....................................................................................................................................... 13 8. 20DB BANDWIDTH ..................................................................................................................................... 16 8.1. MEASUREMENT PROCEDURE ........................................................................................................... 16 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 16 8.3. MEASUREMENT RESULTS .................................................................................................................. 17 9. FCC LINE CONDUCTED EMISSION TEST ................................................................................................ 18 9.1. LIMITS OF LINE CONDUCTED EMISSION TEST................................................................................. 18 9.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST .............................................................. 18 9.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST ............................................ 19 9.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST .......................................................... 19 9.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST .................................................................... 20 APPENDIX A: PHOTOGRAPHS OF TEST SETUP ........................................................................................ 22 APPENDIX B: PHOTOGRAPHS OF EUT ....................................................................................................... 24 Report No.: AGC07487190301FE03 Page 4 of 31 1. VERIFICATION OF CONFORMITY Applicant SHENZHEN CIJI TECHNOLOGY CO.,LTD. Address Room 1807, Overseas Chinese Scholars Venture Building, No.29 Gaoxin South Ring Road, Nanshan District, Shenzhen, China, 518057 Manufacturer SHENZHEN CIJI TECHNOLOGY CO.,LTD. Address Room 1807, Overseas Chinese Scholars Venture Building, No.29 Gaoxin South Ring Road, Nanshan District, Shenzhen, China, 518057 Product Designation Stealth Wireless Charger Brand Name CIJI Test Model QB01 Series Model QB11, QB21, QB31, QB41, QB51 Difference Description All the same except for the model name and front appearance Date of test Mar. 13, 2019 to Mar. 19, 2019 Deviation No any deviation from the test method Condition of Test Sample Normal Test Result Pass Report Template AGCRT-US-BR/RF We hereby certify that: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 (2013) and the energy emitted by the sample EUT tested as described in this report is in compliance with Section 15.207, 15.209, 15.203 of the FCC Part 15, Subpart C Rules. The results of testing in this report apply to the product/system which was tested only. Prepared By Sky Dong (Project Engineer) Mar. 19, 2019 Reviewed By Max Zha…

Text truncated - open the document above for the full version.

Test Setup Photos FCC RADIATED EMISSION TEST SETUP BELOW 1GHZ FCC LINE CONDUCTED EMISSION TEST SETUP