2AVMF-F21C3XX001Treadmill

Correct Disposal of this product 冗 ＿ This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environ­ mental safe recycling. OWNER' &CAUTION Please read all precautions and instructions in this manual before using this equipment. S MANUAL FCCStatement Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2) thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthoritytooperatetheequipment. ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedto providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand, ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethat interferencewillnotoccurinaparticularinstallation. Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuseris encouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures: --Reorientorrelocatethereceivingantenna. --Increasetheseparationbetweentheequipmentandreceiver. --Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected. --Consultthedealeroranexperiencedradio/TVtechnicianforhelp. NOTE2:Anychangesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthoritytooperatetheequipment. Thisequipmentshouldbeinstalledandoperatedwithminimumdistance20cmbetweentheradiatorandyourbody. Running Belt DAILY MAINTERANCE The running belt of the treadmill is imported which was made from special materials with lower coefficient of friction and higher of tensile strength; the running board is with double shock-absorb system and which surface is smooth and hard wearing.LubricatingIt can prolong the life of treadmill to keep it in clean situation, so it’s necessary to clean usually the exposed running board and side foot-board, to wipe running belt by soft cloths with water, please pay attention to prevent the water from the underside of belt and over.The treadmill uses the auto-lubricating system. When the console test the total distance reached the pre-setted distance in the system,the lubricating motor begin to work.During using ,user should check the auto-lubricating system timely. Add the oil quickly if find the oil bottle is empty. If the auto-lubricating system don’t work well,please call the dealer quickly. Adjusting to loose or tight beltThe running belt was adjusted before it left the factory and after assembling, but after a period of usage, the belt will become loose, this circumstance is out of guarantee to be repaired. The user can adjust it by oneself .the loose belt will slip, but over much tight belt perhaps harms the motor, roller and itself. SolutionRemove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjust-ment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 5 to 6 c m off the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened. The walking belt is off-centreAll the running belt were adjusted before the treadmill left the factory or after assembling,but after a period of usage,the belt will off-centre,this circumstance is from the following causes: (1) The treadmill is not horizontal. (2) The feet of user do not stand on the center of belt. (3) The two feet of user are with different strengths. SolutionUsually it can return after several minutes’ moving, but if it can’t, please adjust the bolt which is at the end of treadmill at unit of half-circle by a allen wrench. If the belt slant to left, please adjust the left boltclock-wisely or adjust the right bolt counter clock-wisely(B).If the belt slant to right, it’s adjusted oppositely(C).Repeat until the walking belt is centred(The side of running belt in the label’s green colour)(D). The excentric running belt is out of guarantee .The user adjust it by oneself. More attention:The excentric belt will strictly harm itself,so the user must adjust it once find this circum-stance. More attention: it’s not over much tight, much better. ＿ DAILY MAINTERANCE LCD Screen Wireless Charging Heart Rate Sensor Emergency Stop Button Motor cover Sports Wheel Adjusting Bottom Feet Running Bel t El astic Back Regulator Running Bel t | WireIess charging instructions| 厂 － Bottle Hol der Hand Ra i I This treadmill uses a manual refuel system. When the controller detects that the total mileage or the time from the last refueling has reached the preset value, the screen will pop up a dialog box, indicating that it is time for you to refuel the running belt. Please open the trim cover of upright pole which under the right upright pole, using the silicon oil bottle which attached with the machine, at the time when machine running in lower speed, slowly drip the silicon oil into the hole, refuel 50ml every time. Soundbox Operation Panel Upright Pol e Frame Edgi ngs L—— - | ——_J “ 因 辜 1. "::x�;" Wireless charging only supports mobile phones that meet Qi standard; 2. Because of different brands of mobile phone wireless charging receiving position is different, can'…

Text truncated - open the document above for the full version.

Model difference statement We, the undersigning company Company Name: Guangzhou Yuandong Smart Sports Technology Co. Ltd. Address: Room1004, Building 2, No.6, 4th Yunpu Road, Huangpu District, Guangzhou, China Hereby confirm that the following products: Product description: Treadmill Type designation: F21-C30A, F21-xxxxx ("x"=0-9, A-Z, a-z, -or blank): 110-240V~, 50/60Hz, 2200W, Class I F21-C2xxx ("x"=0-9, A-Z, a-z, -or blank): 110-240V~, 50/60Hz, 1860W, Class I That All versions of the Models F21-C30A, F21-xxxxx ("x"=0-9, A-Z, a-z, -or blank) and F21-C2xxx ("x"=0-9, A-Z, a-z, -or blank) are electrically equal except model name, colors and power motor. Date: 2020-07-30 Name: Shaocong Wen Telephone: (+86)18688398814 E-mail: [email protected] Signature:

Guangzhou Yuandong Smart Sports Technology Co, Ltd. Room 1004, Building (2), No.6 Yunpu 4th Road, Huangpu District, Guangzhou, Guangdong, China Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Guangzhou Yuandong Smart Sports Technology Co, Ltd. would like the following documents regarding this submission for FCC ID: 2AVMF-F21C3XX001 to be kept confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days. Sincerely, By: __________________________ Shaocong Wen (Signature) (Print name) Title: Certification Engineer On behalf of: Guangzhou Yuandong Smart Sports Technology Co, Ltd. (Company Name) Telephone: (+86)18688398814

Guangzhou Yuandong Smart Sports Technology Co, Ltd. Room 1004, Building (2), No.6 Yunpu 4th Road, Huangpu District, Guangzhou, China -------------------------------------------------------------------------------- (FCC ID：2AVMF-F21C3XX001) POWER OF ATTORNEY DATE: 2020-07-30 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize ITL Co., Ltd (MR. Pauler LI, Manager) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by ITL Co., Ltd (MR. Pauler LI, Manager) on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Guangzhou Yuandong Smart Sports Technology Co, Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Guangzhou Yuandong Smart Sports Technology Co, Ltd. ----------------------------------------- (Shaocong Wen) (Certification Engineer)

Page 1 of 9 External PHOTO: FCC ID: 2AVMF-F21C3XX001 Page 2 of 9 Page 3 of 9 Page 4 of 9 Page 5 of 9 Page 6 of 9 Page 7 of 9 Page 8 of 9 Page 9 of 9

REVISIONS RECORD DESCRIPTIONREVISIONDATEREVISED BY GUANGZHOU SHIYUAN ELECTRONIC CO.,LTD. TOLERANCE UNLESS OTHERWISE SPECIFIED N/APART NAMESCALE SIZE SHEET 1:1NOTES: N/A 1/1 CHK'DAPP'D UNITmm MATERIALSEEDRAWING TECHNOLOGYSEEDRAWING DRAWN =CRITICAL DIMDRAWING No. MAT'L SEE NOTES: N/A NewV1.02020/07/28 林基加 林基加 曹奇郭阳丽 铭牌贴纸 F21-P07-P31201-V1.0 红色字体为变量，工厂根据实际订单打印 69mm 34mm 工艺参数： 1. 材质： 55#合成纸，背压花底胶 2. 尺寸： 69*34mm 3. 来料为空白贴，所有内容由工厂打印，卷装来料 4. 所有材质及油墨需符合RoHS 5. 高温高湿环境下（60°C，相对湿度60%）无翘角、 起泡、脱落现象，粘贴测试24小时后无以上不良 现象出现。 01190621000319 Power 2200W 220-240V~ 50/60Hz F21-C3XX Guangzhou Yuandong Smart Sports Technology Co, Ltd. FCC ID:2AVMF-F21C3XX001Made in China

Page 1 of 12 Internal PHOTO: FCC ID: 2AVMF-F21C3XX001 Page 2 of 12 Page 3 of 12 Page 4 of 12 Page 5 of 12 Page 6 of 12 Page 7 of 12 Page 8 of 12 Page 9 of 12 Page 10 of 12 Page 11 of 12 Page 12 of 12

ITL Page 1 of 7 Report No.: D200720009-4 RF Exposure evaluation report Applicant: Guangzhou Yuandong Smart Sports Technology Co, Ltd. Address of Applicant: Room 1004, Building (2), No.6 Yunpu 4th Road, Huangpu District, Guangzhou, Guangdong, China Manufacturer: Guangzhou Yuandong Smart Sports Technology Co, Ltd. Address of Manufacturer: Room 1004, Building (2), No.6 Yunpu 4th Road, Huangpu District, Guangzhou, Guangdong, China Product name: Treadmill Model: F21-C30A, F21-xxxxx("x"=0-9, A-Z, a-z, -or blank) F21-xxxxx("x"=0-9, A-Z, a-z, -or blank) Rating(s): F21-C30A, F21-xxxxx("x"=0-9,A-Z,a-z,-or blank): 110-240V~, 50/60Hz, 2200W, Class I F21-xxxxx("x"=0-9,A-Z,a-z,-or blank):110-240V~, 50/60Hz,1860W, Class I Trademark: / Standards: 47 CFR Part 1.1310 (2013) 47 CFR Part 2.1091 (2013) KDB447498D01 General RF Exposure Guidance v06 FCC ID: 2AVMF-F21C3XX001 Date of Receipt: 2020-07-22 Date of Test: 2020-07-22~2020-08-05 Date of Issue: 2020-08-06 Test Result Pass* * In the configuration tested, the test item complied with the standards specified above. Authorized for issue by: Test by: Reviewed by: Aug.06, 2020 Eleven Liang Aug.06, 2020 Pauler Li Project Engineer Project Manager Date Name/Position Signature Date Name/Position Signature ITL Page 2 of 7 Report No.: D200720009-4 Possible test case verdicts: test case does not apply to the test object .. : N/A test object does meet the requirement ........ : P (Pass) test object does not meet the requirement .. : F (Fail) Testing Laboratory information: Testing Laboratory Name .......... : ITL Co., Ltd Address : No. 8 Jinqianling Street 5, Huangjiang Town, Dongguan, Guangdong, 523757 P.R.C. Testing location : Same as above Tel : 0086-769-39001678 Fax : 0086-20-62824387 E-mail : [email protected] General remarks: The test results presented in this report relate only to the object tested. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. This report would be invalid test report without all the signatures of testing technician and approver. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. General product information: All models have similar mechanical and electrical construction. Differences between them are motor and wattage. If no otherwise specified, all tests were conducted on model F21-C30A. ITL Page 3 of 7 Report No.: D200720009-4 1 Contents Page 1 CONTENTS ......................................................................................................................................... 3 2 GENERAL INFORMATION .............................................................................................................. 4 2.1 CLIENT INFORMATION .................................................................................................................. 4 2.2 GENERAL DESCRIPTION OF E.U.T. ............................................................................................. 4 2.3 DETAILS OF E.U.T. ...................................................................................................................... 4 2.4 DESCRIPTION OF SUPPORT UNITS .............................................................................................. 5 2.5 TEST LOCATION ........................................................................................................................... 5 2.6 DEVIATION FROM STANDARDS .................................................................................................... 5 2.7 ABNORMALITIES FROM STANDARD CONDITIONS........................................................................ 5 2.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................. 5 2.9 TEST FACILITY ............................................................................................................................. 5 3 SAR EVALUATION ............................................................................................................................ 6 3.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................. 6 3.1.1 STANDARD REQUIREMENT ............................................................................................................... 6 3.1.2 EUT RF EXPOSURE ......................................................................................................................... 7 ITL Page 4 of 7 Report No.: D200720009-4 2 General Information 2.1 Client Information Applicant: Guangzhou Yuandong Smart Sports Technology Co, Ltd. Address of Applicant: Room 1004, Building (2), No.6 Yunpu 4th Road, Huangpu District, Guangzhou, Guangdong, China 2.2 General Description of E.U.T. Name: Treadmill Model No.: F21-C30A Trade Mark: / Operating Frequency: 802.11 b/g/n(HT20): 2412MHz-2462MHz 2402 MHz to 2480 MHz for Bluetooth. Channels: 802.11b, 802.11g, 802.11n(20MHz): 11 79 channels with 1MHz step for Bluetooth Type of Modulation: CCK, OFDM, QPSK, BPSK, 16QAM, 64QAM for WIFI GFSK, ( π/4) DQPSK, 8DPSK for Bluetooth Antenna Reference Internal Antenna with 3dBi peak Gain Function: Treadmill 2.3 Details of E.U.T. EUT Power Supply: 120Vac, 60Hz Test mode for WIFI: The EUT was operated in the engineering mode to fix the Tx frequency that was for the purpose of the measurements. All testing shall be performed under maximum output power condition, and to measure its highest possible emissions level, more detailed description as follows: Test Mode List Test Mode Description Remark TM1 802.11b 2412MHz, 2437MHz, 2462MHz, TM2 802.11g 2412MHz, 2437MHz, 2462MHz, TM3 802.11n(HT20) 2412MHz, 2437MHz, 2462MHz, Test mode for BT: The program used to control the EUT for staying in continuous transmitting and receiving mode is programmed. Channel lowest (2402MHz…

Text truncated - open the document above for the full version.

ITL Page 1 of 84 Report No.: D200720009-2 TEST REPORT Applicant: Guangzhou Yuandong Smart Sports Technology Co, Ltd. Address of Applicant: Room 1004, Building (2), No.6 Yunpu 4th Road, Huangpu District, Guangzhou, Guangdong, China Manufacturer: Guangzhou Yuandong Smart Sports Technology Co, Ltd. Address of Manufacturer: Room 1004, Building (2), No.6 Yunpu 4th Road, Huangpu District, Guangzhou, Guangdong, China Product name: Treadmill Model: F21-C30A, F21-xxxxx("x"=0-9, A-Z, a-z, -or blank) F21-C2xxx("x"=0-9, A-Z, a-z, -or blank) Rating(s): F21-C30A, F21-xxxxx("x"=0-9,A-Z,a-z,-or blank): 110-240V~, 50/60Hz, 2200W, Class I F21-C2xxx("x"=0-9,A-Z,a-z,-or blank):110-240V~, 50/60Hz,1860W, Class I Trademark: / Standards: 47 CFR PART 15 Subpart C: 2019 section 15.247 FCC ID: 2AVMF-F21C3XX001 Data of Receipt: 2020-07-22 Date of Test: 2020-07-22~2020-08-05 Date of Issue: 2020-08-06 Test Result Pass* * In the configuration tested, the test item complied with the standards specified above. Authorized for issue by: Test by: Reviewed by: Aug.06, 2020 Eleven Liang Aug.06, 2020 Pauler Li Project Engineer Project Manager Date Name/Position Signature Date Name/Position Signature ITL Page 2 of 84 Report No.: D200720009-2 Possible test case verdicts: test case does not apply to the test object .. : N/A test object does meet the requirement ........ : P (Pass) test object does not meet the requirement .. : F (Fail) Testing Laboratory information: Testing Laboratory Name .......... : ITL Co., Ltd Address : No. 8 Jinqianling Street 5, Huangjiang Town, Dongguan, Guangdong, 523757 P.R.C. Testing location : Same as above Tel : 0086-769-39001678 Fax : 0086-20-62824387 E-mail : [email protected] General remarks: The test results presented in this report relate only to the object tested. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. This report would be invalid test report without all the signatures of testing technician and approver. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. General product information: All models have similar mechanical and electrical construction. Differences between them are motor and wattage. If no otherwise specified, all tests were conducted on model F21-C30A. ITL Page 3 of 84 Report No.: D200720009-2 1 Test Summary Test Test Requirement Test method Result Antenna Requirement FCC PART 15 C section 15.247 (c) and Section 15.203 FCC PART 15 C section 15.247 (c) and Section 15.203 PASS Occupied Bandwidth (-20dB) FCC PART 15 C section 15.247 (a)(1); ANSI C63.10:2013 PASS Carrier Frequencies Separated FCC PART 15 C section 15.247(a)(1); ANSI C63.10:2013 PASS Hopping Channel Number FCC PART 15 C section 15.247(a)(1)(iii) ANSI C63.10:2013 PASS Dwell Time FCC PART 15 C section 15.247(a)(1)(iii); ANSI C63.10:2013 PASS Maximum Peak Output Power FCC PART 15 C section 15.247(b)(1); ANSI C63.10:2013 PASS Conducted Spurious Emission (30 MHz to 25 GHz) FCC PART 15 C section 15.247(d); ANSI C63.10:2013 PASS Radiated Spurious Emission (9 kHz to 25 GHz) FCC PART 15 C section 15.247(d); ANSI C63.10:2013 PASS Band Edges Measurement FCC PART 15 C section 15.247 (d) &15.205 ANSI C63.10:2013 PASS Conducted Emissions at Mains Terminals FCC PART 15 C section 15.207; ANSI C63.10:2013 PASS Radiated Emissions which fall in the restricted bands FCC PART 15 C section 15.209 ANSI C63.10:2013 PASS Pseudorandom Frequency Hopping Sequence 47 CFR Part 15, Subpart C Section 5.247(b)(4)&TCB Exclusion List ANSI C63.10:2013 PASS Remark: N/A: not applicable. Refer to the relative section for the details. EUT: In this whole report EUT means Equipment Under Test. Tx: In this whole report Tx (or tx) means Transmitter. Rx: In this whole report Rx (or rx) means Receiver. RF: In this whole report RF means Radio Frequency. ANSI C63.10:2013 the detail version is ANSI C63.10:2013 in the whole report. ITL Page 4 of 84 Report No.: D200720009-2 2 Contents Page TEST REPORT ....................................................................................................................................................................... 1 1 TEST SUMMARY ......................................................................................................................................................... 3 2 CONTENTS ................................................................................................................................................................... 4 3 GENERAL INFORMATION ........................................................................................................................................ 5 3.1 CLIENT INFORMATION ............................................................................................................................................ 5 3.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 5 3.3 DETAILS OF E.U.T. ................................................................................................................................................ 5 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 5 3.5 TEST LOCATION ..................................................................................................................................................... 6 3.6 DEVIATION FROM STANDARDS .............................................................................................................................. 6 3.7 ABNORMALITIES FROM STANDARD CONDITIONS.................................................................................................. 6 3.8 OTHER INFORMATION REQUESTED BY TH…

Text truncated - open the document above for the full version.

Page 1 of 2 TEST PHOTO: Page 2 of 2