2AVMM-GOBACK01Medal Bluetooth GoBack

Médaille « GoBack TM » 1 / Pour activer « GoBack », presser brièvement une fois la médaille entre deux doigts. La médaille clignote deux secondes. 2/ Pour désactiver « GoBack », presser la médaille entre deux doigts pendant environ trois secondes. La médailles‘allume fixe pendant trois secondes. 3/L’utilisation de la protection silicone est préconisée seulement si l’animal va dans l’eau. Pour obtenir le programme « GobackMedals » pour Android ou iOS ainsi que le manuel de l’utilisateur saisir le lien suivant : https://goback.fr ouscannez le QR code : 1/ To activate “GoBack , lightly press the medal between fingers. Medal flashes two seconds. 2 / To deactivate “GoBack”, press three seconds between fingers. Medal lights up three seconds. 3 / The use of silicone protection is recommended only if the animal goes into the water. To get the Android or iOS GoBack Medals software and the comprehensive user manual use the following access link : https://goback.fr or scan the QR Code : Patent pending FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Size: 3mm*6mm FCC ID: 2AVMM-GOBACK01 Label location

Global United Technology Services Co., Ltd. Report No.: GTS201912000259F01 Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 23 TEST REPORT Applicant: MICHOT Address of Applicant: Ia Mare aux Buis 78720 Dampierre France Manufacturer: Atria Trading Address of Manufacturer: 105 rue des Mignottes 89005 Auxerre France Equipment Under Test (EUT) Product Name: Medal Bluetooth“GoBack” Model No.: GoBack-01 Trade Mark: GoBack Medal FCC ID: 2AVMM-GOBACK01 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249 Date of sample receipt: December 24, 2019 Date of Test: December 24, 2019 Date of report issued: December 24, 2019 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS201912000259F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 23 2 Version Version No. Date Description 00 December 24, 2019 Original Prepared By: Date: December 24, 2019 Project Engineer Check By: Date: December 24, 2019 Reviewer Report No.: GTS201912000259F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 23 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................ 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 7 5.7 TEST LOCATION ................................................................................................................................. 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 10 7.1 ANTENNA REQUIREMENT ................................................................................................................... 10 7.2 RADIATED EMISSION METHOD ........................................................................................................... 11 7.2.1 Field Strength of The Fundamental Signal ................................................................................ 13 7.2.2 Spurious emissions .................................................................................................................... 14 7.2.3 Bandedge emissions.................................................................................................................. 19 7.3 20DB OCCUPY BANDWIDTH .............................................................................................................. 21 8 TEST SETUP PHOTO ............................................................................................................................ 23 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 23 Report No.: GTS201912000259F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 23 4 Test Summary Test Item Section in CFR 47 Result Antenna requirement 15.203 Pass AC Power Line Conducted Emission 15.207 N/A Field strength of the fundamental signal 15.249 (a) Pass Spurious emissions 15.249 (a) (d)/15.209 Pass Band edge 15.249 (d)/15.205 Pass 20dB Occupied Bandwidth 15.215 (c) Pass Remarks： 1. Pass: The EUT complies with the essential requirements in the standard. 2. Test according to ANSI C63.10:2013. 4.1 Measurement Uncertainty Test Item Frequency Range Measurement Uncertainty Notes Radiated Emission 30MHz-200MHz 3.8039dB (1) Radiated Emission 200MHz-1GHz 3.9679dB (1) …

Text truncated - open the document above for the full version.

Radiated Emission