2AVQP-M1011050Data comms & tracking device using WASP technology

REGULATORY INFORMATION Simplified EU Declaration of Conformity Hereby, Minetec Pty Ltd declares that the radio equipment type [Refer to products listed in Table 1] complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.Minetec.com.au/compl iance Manufacturer address: Minetec Pty Ltd, Unit 2, 29 Wellard Street, Bibra Lake, WA 6163, Australia Federal Communications Commission (FCC) Statements (as applicable) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Part 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Compliance Statements for Canada (as applicable) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. RSS-Gen notice: This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference; and 2) This device must accept any interference, including interference that may cause undesired operation of the device. INFORMATION RÉGLEMENTAIRE Avis de conformité Canadien Le présent produit est conforme aux spécifications techniques retenues par l’Innovation, Sciences et Développement économique Canada (ISDE). RSS-Gen l’avis: Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Modification Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device. Toute modification non approuvée explicitement par le fournisseur de licence de l’appareil peut entraîner l’annulation du droit de l’utilisateur à utiliser l’appareil. FCC and RSS MPE RF Exposure statement This equipment complies with the FCC and ISED Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and all persons during normal operation. Cet équipement est conforme aux limites d'exposition aux radiations de la FCC et d'ISDE Canada établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et toutes les personnes pendant le fonctionnement normal. ADVICE AND SAFETY INSTRUCTIONS For complete product specification and operational guidance, refer to the Minetec MineOffice Administrator Manual. ASSEMBLY INSTRUCTIONS For guidance on assembly & Installation, please refer to the Minetec MineOffice Administrator Manual. SAFETY CONSIDERATIONS • Keep out of reach of children, small parts are a choking hazard. • Do not mutilate the batteries. • Dispose of batteries as per local regulations. • Only charge the products and accessories according to the instructions in the manual. • Do not dispose of the devices or accessories in a fire. Table 1: Radio Frequency Specification Product p/n CAT p/n Power 2401 to 2473MHz 5725 to 5850MHz* Mobile Node M1010512- 001 5918506 18dBm 29.1dBm Personal Node M1010802 5908586 18dBm 27dBm Bridge Node M1011062 5908599 19dBm 18.7dBm Access Point M1011061 5908598 19dBm 18.7dBm Vehicle PC M1011057 5918593 19dBm n/a *Range and power applicable to EU products only Table 2: Certification Scheme Product p/n CAT p/n FCC ISED SDPPI ICASA Mobile Node M1010512- 001 5918506 2AVQP-M1010512 / U30-G2M5477 25823-M1010512 / 8169A-G2M5477 65270/SDPPI/2019 tbc Personal Node M1010802 5908586 2AVQP-M1010802 / U30-G2M5477 25823-M1010512 / 8169A-G2M5477 66255/SDPPI/2020 tbc Bridge Node M1011062 5908599 2AVQP-M1011050 / Z9W-CM4 25823-M1011050 / 11468A-CM4 CAN ICES-3(B)/NMB-3(B) 65497/SDPPI/2020 TA-2019/5196 Access Point M1011061 5908598 2AVQP-M1011050 / N6C-SXPCEAN2 25823-M1011050 / 4908A-SXPCEAN2 66339/SDPPI/2020 tbc Vehicle PC M1011057 5918593 N6C-SXPCEAN2 4908A-SXPCEAN2 64569/SDPPI/2019 tbc

Wi-Fi WASP Infrastructure Installation Guide Installation Guide ICT Hardware Installers 19/06/2018 Wi-Fi WASP Infrastructure Installation Guide Installation Guide Rev: 1 i © Minetec 2019 Currency Minetec makes every effort to ensure the accuracy and currency of all information contained in this document. Minetec makes no expressed or implied warranty or representation based on the information presented in this document. Minetec reserves the rights to change, alter and adjust equipment specifications and information pertaining to the product information in this document without prior notice. Please report any errors or omissions to the Product Assurance Manager, Minetec by emailing [email protected] . Minetec assumes no liability for damage incurred directly or indirectly from errors, omissions, or discrepancies between the devices and the manuals. Copyright notice MINETEC is the sole owner of the intellectual property contained in any documentation bearing its name. All materials, including Internet pages, documents and online graphics, audio and video, are protected by copyright law. Apart from any fair dealing for the purposes of private study, research, criticism or review, as permitted under the provisions of the Australian Copyright Act 1968, no part of this document may be reproduced, transmitted in any form, or re-used for any commercial purposes whatsoever without written permission of Minetec. Note that this document represents the status of the topic at the date shown and is subject to change without notice. Contact Minetec to check for later releases. © 2019 Minetec. All rights reserved. Minetec™, SafeDetect™, MineOffice™, SMARTS™, Trax™, TagBoard™ and MineView™ are trademarks of Minetec. Other brand, product, and company names mentioned in this document are trademarks or registered trademarks of their respective holders. The English version takes precedence over any translated versions. Compliance Labels located on the exterior of each device indicate the regulations with which the device complies. Minetec systems and devices comply with the appropriate laws and regulations in Australia and New Zealand. Minetec systems and devices comply with the appropriate laws and regulations of the countries and regions as described in the product data sheets and any associated Compliance Supplement. For any third-party devices refer to the vendors manuals for regulatory statements. It is important to install and operate the devices and systems according to the guidelines in this document to maintain conformity with regulations, standards and directives. Minetec is not responsible for modifications made by the end-user, or their sub-contractors, and the consequences thereof, which may alter the conformity of the product with the CE Marking. Minetec Terms, Conditions and Warranty Notwithstanding any contracts, agreements or support plans please refer to http://minetec.com.au/minetec-terms-conditions-warranty for the following: • Minetec Standard Terms and Conditions of Sale. • Minetec Software Licence Terms and Conditions. • Minetec Warranty Statement. Wi-Fi WASP Infrastructure Installation Guide Installation Guide Rev: 1 ii © Minetec 2019 Responsible use This document describes a Minetec system, including how to operate or troubleshoot hardware and/or software. The procedures and guidelines are not prescriptive and do not include operational and safety processes that may apply at your site. As such, responsible use of the procedures and/or guidelines in this document is only achieved by aligning with and/or being incorporated within the Contractor's own operational and HSE policies, guidelines and procedures. Safety precautions To prevent damage to the devices product and to ensure the correct operations, please read these precaution statements before installing or troubleshooting any devices. CAUTION Do not attempt to service any device unless both qualified and authorised my Minetec in writing, and as indicated in this document. • If applicable, disconnect devices from all power sources before cleaning. Do not use liquid or spray detergents for cleaning. Use a soft, lint-free cloth to wipe screens and a damp cloth to wipe the exterior of any device. Do not use paper towels to clean the screen. • Minimise the exposure of devices to ultraviolet light for extended periods (eg direct sunlight) as this can damage the device surfaces (eg make them more brittle). • Keep the device away from excessive moisture and extreme temperatures. • Do not subject the device to sudden and severe temperature and/or humidity changes. This could cause moisture condensation inside the unit, which could damage the device. In the event of moisture condensation, allow the device to dry out completely before use. General safety To ensure your own personal safety and prevent electrical damage and/or fire, please read these safety statements before installing any devices. Use extreme care and caution when installing or removing devices. CAUTION Do not attempt to service any device unless you are experienced, qualified and authorised by Minetec in writing, and as indicated in this document. Always use care when handling or operating Minetec devices. For all devices: • Dropping a device or letting it fall could cause damage resulting in a potential electrical or fire hazard and/or voiding the warranty. • Some devices may get hot in use and could pose a potential fire or burn hazard. Do not place anything on top of the device or drop objects on the device. • Make sure the voltage of the power source is correct before connecting any device to the power source. The incorrect voltage may pose an electrical and or fire hazard. • To prevent damage, fire and/or electrical shock, note all cautions or warnings on a device. • Never pour any liquid on to or into any device. Depending on the device, this may cause damage resulting in fire and/or electrical shock. • For product warranty, safety and performance reasons, only a…

Text truncated - open the document above for the full version.

EMC Technologies Pty Ltd, 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au To: Federal Communications Commission Attention: Certification Officer Date: January 19, 2021 EMC Ref: M2005023 Subject: Original Certification (LMA) Company: Minetec Pty Ltd FCC ID: FCC ID: 2AVQP-M1011050 EUT: WiFi WASP Bridge Minetec Pty Ltd is applying for a certification of the 5.8 GHz transceiver installed in the Minetec Bridge product. This application is a Limited Modular Approval (refer to supplied LMA letter). The device is a WiFi WASP Bridge designed to perform 5.8 GHz proprietary WASP ranging to other WASP devices. The unit can be powered by DC (12-55V) or Power over Ethernet (PoE). The device contains the 5.8 GHz transceiver and a pre-approved 2.4 GHz transmitter (Lima 8 devices WiFi – FCC ID: Z9W-CM4). EMC Technologies Pty Ltd is acting as agent for Mentis Technologies Pty Ltd in this application. Best Regards _____________ Chris Zombolas Technical Director EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, VIC 3042 Australia Ph. +61 3 9365 1000; www.emctech.com.au EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road, Keilor Park, VIC 3042 Australia Ph: + 613 9365 1000 Fax: + 613 9331 7455 Email: [email protected]

MINETEC: ™ STOP WORKING IN THE DARK Minetec Pty Ltd ABN 11094 579 567 2/29 Wellard Street Bibra Lake WA 6163 04 January 2021 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, Subject: Confidentiality Request regarding application for certification of FCC ID: 2AVQP-M1011050 In accordance with Sections 0.457 and 0.459 of the Commission's Rules, Minetec Pty Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below: Exhibit Type Block Diagram Schematics Operational Description File Name " WASP System Signal Flow.jpg" "04-03789_3.pdf', "04-03795_ 1.pdf', "04-03797 _ 1.pdf' "Wi-Fi W ASP Bridge product description.pdf' The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Sunil Sanganbatte Technical Director Unit 2, 29 Wellard Street, Bibra Lake, Perth, WA 6163 Australia

EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au Test Sample Photographs - External Test sample - Host Device EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au Test sample - Host Device EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au Test sample - Host Device EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au Test sample - Host Device

EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au Test Sample Photographs - External Test sample – External (Top) Antenna Connector Test sample – External (Bottom)

© COPYRIGHT MINETEC 2019 SMQ21.03.18EDP28.03.18 1:1 Drawn in Adobe Illustrator CC 2019 2 Unit 2, 29 Wellard St. Bibra Lake WA 6163 Phone: + 61 8 9259 4955 Fax: (08) 9259 4090 M1011060 MATERIAL: 0.25mm matte PC | ADHESIVE: 0.05mm 3M467 ANGLES 2 DECIMAL (0.00) 1 DECIMALS (0.0) 0 DECIMAL (0) +/- 0.2 +/- 1.0 +/- 0.5 +/- 0.05 ARTWORK DIELINE ADHESIVE APPLICATION 96 55 0.2N/ARELEASE FOR QUOTATION ARM06.12.18KWY06.12.18DT07.12.18 1D.60018RELEASE FOR PRODUCTION ESCUTCHEON, BRIDGE, WI-FI WASP CLASSIFICATION: MINETEC Colours: PMS Cool Gray 2 C (Gray) PMS 534 C (Blue -dark) PMS 653 C (Blue - mid) PMS 123 C (Yellow) Notes: 1) All parts and processes to be RoHS compliant. 2) All inks to be UV resistant and non-conductive. 3) Alternative materials may be used with Minetec Engineering approval 4) Green areas indicate position of transparent windows - DO NOT PRINT 5) Artwork to be screen printed Clear - DO NOT PRINT Indicates area for application of adhesive Die cut line 3×Ø6.5 CLEAR OF ADHESIVE Ø4.0 (TYP) CWS15.10.19KWY15.10.19KWY15.10.19 2DI 36626DEBRANDED, MINETEC NAME REMOVED Contains FCC ID: 2AVQP-M1011050 IC: 25823-M1011050 Contains FCC ID: Z9W-CM4, IC: 11468A-CM4 Label Details: FCC and ISED Canada identifications to be included on label located on front of Host. FCC and ISED Canada identifications on label located on module. Host label details (HVIN/model, etc) to be located on side of EUT:

EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au Test Sample Photographs - Internal EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au

EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au Test Sample Photographs - Internal Antenna Connector

Page 1 of 10 EMC Technologies Pty. Ltd. ABN 82 057 105 549 Melbourne 176 Harrick Road Keilor Park, Vic 3042 Tel: +61 3 9365 1000 Sydney Unit 3/87 Station Road Seven Hills, NSW 2147 Tel: +61 2 9624 2777 Email: [email protected] Web: www.emctech.com.au Accredited for compliance with ISO/IEC 17025 – Testing. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, medical testing, calibration and inspection reports. Except for the Certificate of Compliance, this document must only be reproduced in full. RADIOFREQUENCY RADIATION EXPOSURE EVALUATION: MOBILE DEVICES REPORT NUMBER: M2005023-5 TEST STANDARD: 47 CFR PART 2.1091 CLIENT: MINETEC DEVICE: WIFI WASP BRIDGE TRANSMITTER MODEL: M1011062 FCC ID: 2AVQP-M1011050 DATE OF ISSUE: 3 FEBRUARY 2021 EMC Technologies Pty Ltd reports apply only to the specific samples tested under stated test conditions. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. EMC Technologies Pty Ltd shall have no liability for any deductions, inferences or generalisations drawn by the client or others from EMC Technologies Pty Ltd issued reports. This report shall not be used to claim, constitute or imply product endorsement by EMC Technologies Pty Ltd. Page 2 of 10 Report No. M2005023-5 Except for the Certificate of Compliance, this document must only be reproduced in full. Front of Device Inside the Device Page 3 of 10 Report No. M2005023-5 Except for the Certificate of Compliance, this document must only be reproduced in full. REVISION TABLE Version Sec/Para Changed Change Made Date 1 Initial issue of document 3/02/2021 Page 4 of 10 Report No. M2005023-5 Except for the Certificate of Compliance, this document must only be reproduced in full. CONTENTS 1 Introduction ......................................................................................................................... 6 1.1 Laboratory Overview .................................................................................................. 6 1.2 Test Laboratory/Accreditations .................................................................................. 6 2 Device Details..................................................................................................................... 7 3 Limits for Maximum Permissible Exposure (MPE), §1.1310 .............................................. 8 4 Uncertainty ......................................................................................................................... 8 5 Assumptions in this Assessment ........................................................................................ 8 6 Evaluation Result ............................................................................................................... 9 7 Conclusion .......................................................................................................................... 9 8 Appendix A ....................................................................................................................... 10 Page 5 of 10 Report No. M2005023-5 Except for the Certificate of Compliance, this document must only be reproduced in full. RADIOFREQUENCY RADIATION EXPOSURE EVALUATION Device: WiFi WASP Bridge Transmitter Model Number: M1011062 MAC Address: C493000FA332 Part Number: N/A FCC ID: 2AVQP-M1011050 Manufacturer: Minetec Tested for: Minetec Address: Unit 2, Wellard Street, Bibra Lake, WA 6163 Phone Number: + 61 8 9259 4955 Contact: Craig Wroth Email: [email protected] Standards: 47 CFR Part 2.1091 “Radiofrequency radiation exposure evaluation: mobile devices” 47 CFR 1.1310 “Radiofrequency radiation exposure limits” KDB 447498 D01 General RF Exposure Guidance v06 “RF exposure procedures and equipment authorization policies for mobile and portable devices”. Result: Based on an assessment of the documentation provided the WiFi WASP Bridge Transmitter, model M1011062 complies with the RF exposure requirements of 47 CFR Part 2.1091, however an exclusion zone of 20 cm in front of the radiating elements applies, elsewhere the exposure level was below the MPE limits. Refer to Report M2005023-5 for full details Assessment Date: 11 June 2020 Issue Date: 3 February 2021 Assessment Engineer: Peter Jakubiec Shaun Reid Authorised Signatory: Chris Zombolas Managing Director Issued by: EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 E-mail: [email protected] Web: www.emctech.com.au Page 6 of 10 Report No. M2005023-5 Except for the Certificate of Compliance, this document must only be reproduced in full. 1 INTRODUCTION This report is intended to demonstrate compliance of the WiFi WASP Bridge Transmitter, model M1011062 with the RF exposure requirements of 47 CFR Part 2.1091. Evaluation was performed in accordance with FCC KDB 447498 D01. The product sample was provided by the Client. The conclusion herein is based on the information provided by the client. 1.1 Laboratory Overview EMC Technologies Pty. Ltd. is an independently owned Australian company that is NATA accredited to ISO 17025 for both testing and calibration and ISO 17020 for Inspection. – Accreditation Number 5292. 1.2 Test Laboratory/Accreditations Measurements were performed at EMC Technologies' laboratory in Keilor Park, Victoria Australia. Table 1-1: Accreditations for Conformity Assessment Country/Region Body Australia/New Zealand NATA Accreditation Number: 5292 Europe European Union Notified Body Number: 0819 USA FCC Designation Number: AU0001 (Melb) Canada ISED Canada Company Number: 3569B(Melb) Japan VCCI Company Number: 785 Taiwan BSMI Lab Code SL2-IN-E-5001R Page 7 of 10 Report No. M2005023-5 Except for the Certificat…

Text truncated - open the document above for the full version.

Page 1 of 40 EMC Technologies Pty. Ltd. ABN 82 057 105 549 Melbourne 176 Harrick Road Keilor Park, Vic 3042 Tel: +61 3 9365 1000 Sydney Unit 3/87 Station Road Seven Hills, NSW 2147 Tel: +61 2 9624 2777 Email: [email protected] Web: www.emctech.com.au Accredited for compliance with ISO/IEC 17025 – Testing. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, medical testing, calibration and inspection reports. This document shall not be reproduced except in full. RADIO TEST REPORT REPORT NUMBER: M2005023-3 TEST STANDARD: FCC PART 15 SUBPART E SECTION 15.407 ISED RSS-247 SECTION 6 CLIENT: MINETEC DEVICE: WIFI WASP BRIDGE MODEL: M1011062 FCC ID: 2AVQP-M1011050 IC: 25823-M1011050 DATE OF ISSUE: 16 JANUARY 2021 EMC Technologies Pty Ltd reports apply only to the specific samples tested under stated test conditions. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. EMC Technologies Pty Ltd shall have no liability for any deductions, inferences or generalisations drawn by the client or others from EMC Technologies Pty Ltd issued reports. This report shall not be used to claim, constitute or imply product endorsement by EMC Technologies Pty Ltd. Page 2 of 40 Report No. M2005023-3 This document shall not be reproduced except in full. Equipment Under Test (EUT): WiFi WASP Bridge REVISION TABLE Version Sec/Para Changed Change Made Date 1 Initial issue of document 16/01/2021 Page 3 of 40 Report No. M2005023-3 This document shall not be reproduced except in full. CONTENTS 1 Test Summary ................................................................................................................... 7 2 Test Facility ....................................................................................................................... 7 2.1 General ..................................................................................................................... 7 2.2 Test Laboratory/Accreditations ................................................................................. 7 3 Test Equipment Calibration ............................................................................................... 8 4 Measurement Uncertainty ................................................................................................. 8 5 Device Details ................................................................................................................... 9 5.1 EUT (Transmitter) Details ......................................................................................... 9 5.2 EUT (Host) Details .................................................................................................... 9 5.3 Test Configuration..................................................................................................... 9 5.4 Modifications ............................................................................................................. 9 5.5 Deviations from the Standard ................................................................................... 9 6 Results ............................................................................................................................ 10 6.1 §15.203 / §RSS-Gen 6.8 Antenna Requirement ..................................................... 10 6.2 §15.205 / §RSS-Gen 8.10 Restricted Bands of Operation ...................................... 10 6.3 §15.209 / §RSS-Gen 8.9 Radiated emission limits; general requirements ............. 10 6.4 §15.207 / §RSS-Gen 8.8 Conducted Limits ............................................................ 10 6.4.1 Test Procedure ................................................................................................... 10 6.4.2 Limits .................................................................................................................. 10 6.4.3 Results ................................................................................................................ 11 6.5 §15.407(e)/ §RSS-247 6.2.4.1 – 6 dB bandwidth ................................................... 14 6.5.1 Test Procedure ................................................................................................... 14 6.5.2 Limits .................................................................................................................. 14 6.5.3 Results ................................................................................................................ 14 6.6 §15.407(a)(3) / §RSS-247 6.2.4.1 Maximum Conducted Output Power ................. 16 6.6.1 Test Procedure ................................................................................................... 16 6.6.2 Limits .................................................................................................................. 16 6.6.3 Results ................................................................................................................ 16 6.7 §15.407(a)(3) / §RSS-247 6.2.4.1 Maximum Power Spectral Density .................... 19 6.7.1 Test Procedure ................................................................................................... 19 6.7.2 Limits .................................................................................................................. 19 6.7.3 Results ................................................................................................................ 19 6.8 §15.407(b)(4) / §RSS-247 6.2.4.2 Band-Edge Emission Measurements ................ 21 6.8.1 Test Procedure ................................................................................................... 21 6.8.2 Limits .....................................................................…

Text truncated - open the document above for the full version.

EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au Test Setup Photographs Conducted Emissions EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au Conducted Emissions EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au Radiated Emissions: 9 kHz – 30 MHz EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au Radiated Emissions: 9 kHz – 30 MHz EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au Radiated Emissions: 30 – 1000 MHz EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61 (0)3 9365 1000, Email: [email protected], Web: www.emctech.com.au Radiated Emissions: 30 – 1000 MHz EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, Victoria 3042, Australia Ph: + 61…

Text truncated - open the document above for the full version.