2AVRHBT-DA22WFlat Panel Digital X-ray Detector

1 BSD3543W User Manual BT-DA22W/BT-DB22W 2 About this manual  This user manual is specially designed to explain functions and features of BT-DA22W/BT-DB22W, and it will be referred as the device hereinafter.  The user manual provides information for service and safety operation.  Be sure to read this manual thoroughly before using the device.  Device specifications or contents of this manual may be changed without prior notice due to upgrade of detector functions.  Images and screenshots are those of representative model of the series and may differ in appearance from the actual device.  You are not allowed to reuse or distribute any part of this manual without prior permission.  Only a physician or a legally certified operator should use this device.  The device should be maintained in a safe and operable condition by maintenance personnel.  Use only computers and image display monitors complying with IEC 60601-1 or IEC 60950-1, and under a system configuration complying with IEC 60601-1-1. For details, consult your sales representative.  Use only the dedicated cables. Do not use any cables other than those supplied with this device.  In no event shall BONTECH be liable for any damage or loss arising from fire, earthquake, any action or accident by a third party, any intentional or negligent action by users, any trial usage, or other usage under abnormal conditions.  Roentgenography, image processing, image reading, and image data storage must be performed in accordance with the laws of the country or region in which the device is being used. The user is responsible for maintaining the privacy of image data.  It is the responsibility of the attending physicians to provide medical care services. BONTECH will not be liable for faulty diagnoses.  In no event shall BONTECH be liable for direct or indirect consequential demages arising from the use or unavailability of this device.  BONTECH shall not be liable for any damage arising from moving, alteration, inspection or repair by a person other than authorized service engineers.  Specifications, composition, and appearance of this device may change without prior notice.  This product is a medical device.  Service manuals are provided as hardcopy by default, and may also be provided as softcopy if necessary. 3 Copyright This manual is protected under international copyright laws. No part of this manual may be reproduced, distributed, translated or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system, without the prior written permission of BONTECH. Product specifications or the contents of this manual may be changed without prior notice due to an upgrade of the device’s functions. Trademarks The BONTECH name and its logo are registered trademarks of BONTECH Co., Ltd. 4 Table of Contents Safety Information..................................................................................................................6 Notes.....................................................................................................................................................................8 General Hazards.................................................................................................................................................9 Regulatory...........................................................................................................................................................11 1. Overview..............................................................................................................................13 Features...............................................................................................................................................................13 ComponentsDescription................................................................................................................................14 Detector Configuration...................................................................................................................................16 Labels and Symbols.........................................................................................................................................17 2. Notes for Using the Instrument.....................................................................................20 3. Description..........................................................................................................................21 General Description.........................................................................................................................................21 System Overview..............................................................................................................................................22 4. Specifications.....................................................................................................................23 Main Specifications..........................................................................................................................................23 5. Components.......................................................................................................................24 Detector (BSD3543W(BT-DA22W/BT-DB22W)).........................................................................25 Control Box (BT-CB02)....................................................................................................................................26 Charger...............................................................................................................................................................26 Battery pack......................................................................................................................................................27 Other Accessories...............................................…

Text truncated - open the document above for the full version.

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 Attn: Director of Certification SUBJECT:BONTECH Co., Ltd. FCC ID: 2AVRHBT-DA22W DATE: February 09, 2020 This is a description of similarities and differences between the versions of the X-ray Detectors. Variant models are identical to basic model except for Scintillator type. Basic ModelVariant model Product NameFlat Panel Digital X-ray DetectorsFlat Panel Digital X-ray Detectors Model NameBT-DA22WBT-DB22W Scintillator typeCsIGdox Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely Yours, Kichan An / Manager Title: General Manager Company: BONTECH Co.,Ltd

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 Date: 2020-02-09 RE: Request of confidentiality for FCC ID:2AVRHBT-DA22W To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Sectio 552 (b) (4) of the Freedom of Information Act, BONTECH Co., Ltd Hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for180day after the grant as outlined in Public Notice DA 04-1705. This provision will give , BONTECH Co., Ltdtemporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST ExhibitDescription PERMANENT 1Block Diagram 2Operational Description 3Schematics 4Parts List SHORT-TERM 5External Photos 6Internal Photos 7Test-Setup Photos 8Users Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, DATE 2020-02-09 Signature Name: Kichan An Title: General Manager Company: BONTECH Co.,Ltd

BONTECH Co., Ltd. DATE: Feb 26, 2020 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Attn: Director of Certification SUBJECT:BONTECH Co., Ltd. FCC ID: 2AVRHBT-DA22W Gentlemen: 1)No hardware design changes are made on the module except the Host device uses the different antennas from those of the modules and disabled below Table 1 related to WiFi band by the software, But for other bands the software no any changed to increase the RF output power of the module. The original modular reports (report number:1503RSU02091, 1503RSU02902) are submitted to represent the compliance regarding FCC Part 15C/15E conducted RF testing items of the host device. The FCC Part 15C/15E radiated RF testing items are tested on this host device, and the test reports are submitted additionally. Table 1 - Equipment Description Modules Original Grants:Host Device Model:802.11ac Dual Band Module Model: WLE600VX FCC ID: TK4WLE600VX Flat Panel Digital X-ray Detector Model: BT-DA22W Frequency Range: 802.11b/g/n-HT20:2412 ~ 2462 MHzNot used 802.11n-HT40:2422 ~ 2452 MHz802.11n-HT40:2422 ~ 2452 MHz 802.11a/n-HT20: 5180~5320MHz, 5500~5700MHz, 5745~5825MHz Not used 802.11ac-VHT20: 5180~5320MHz, 5500~5700MHz, 5745~5825MHz Not used 802.11n-HT40: 5190~5310MHz, 5510~5670MHz, 5755~5795MHz Not used 802.11ac-VHT40: 5190~5310MHz, 5510~5710MHz, 5755~5795MHz Not used 802.11ac-VHT80: 5210MHz, 5290MHz, 5530MHz, 5610MHz, 5690MHz 5775MHz 802.11ac-VHT80: 5210MHz, 5775MHz Sincerely Yours, Name :Kichan An Title : General Manager Company : BONTECH Co.,Ltd.

Model No.: BT-DA22WPage 1 of 1 External photos Model No.: BT-DA22WPage 2 of 2 External photos BLANKBLANK

Model No.: BT-DA22W Page 1 of 1 Label photo Label

Model No.: BT -DA22W Page 1 of 2 Internal photos Model No.: BT -DA22W Page 2 of 2 Internal photos Antenna

KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 431-716, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Test report No.: KES-SR-20T0001 Page (2 ) of (78) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP-7081-06 Rev. 7 KES A4 Revision history Report No. Reason for Change Date Issued KES-SR-20T0001 Initial release 2020.02.24 KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 431-716, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Test report No.: KES-SR-20T0001 Page (3 ) of (78) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP-7081-06 Rev. 7 KES A4 TABLE OF CONTENTS 1. General Information................................................................................................................................................. 4 1.1. Highest SAR Summary........................................................................................................................ 4 1.2. Device Overview ................................................................................................................................... 4 1.3. Power Reduction for SAR .................................................................................................................. 5 1.4. Nominal and Maximum Output Power Specifications ................................................................ 5 1.5. Simultaneous Transmission Capabilities ....................................................................................... 5 1.6. Near Field Communications (NFC) Antenna.................................................................................. 5 1.7. SAR Test Configurations and Exclusions ...................................................................................... 6 1.8. Guidance Applied ................................................................................................................................. 6 1.9. Device Serial Numbers ........................................................................................................................ 6 2. Introduction ............................................................................................................................................................... 7 2.1. SAR definition ....................................................................................................................................... 7 2.2. SPEAG DASY System .......................................................................................................................... 8 2.3. Robot ....................................................................................................................................................... 8 2.4. Probe........................................................................................................................................................ 9 2.5. Data Acquisition Electronics (DAE) ................................................................................................. 9 2.6. Phantoms .............................................................................................................................................. 10 2.7. Device holder ....................................................................................................................................... 11 2.8. System Validation Dipoles ............................................................................................................... 11 3. Dosimetric Assessment ........................................................................................................................................ 12 4. RF Exposure Limits ............................................................................................................................................... 13 4.1. Uncontrolled Environment ............................................................................................................... 13 4.2. Controlled Environment .................................................................................................................... 13 5. FCC Measurement Procedures ........................................................................................................................... 14 5.1. Measured and Reported SAR .......................................................................................................... 14 5.2. SAR Testing with 802.11 Transmitters .......................................................................................... 14 5.3. General Device Setup ........................................................................................................................ 14 5.4. U-NII-1 and U-NII-2A ........................................................................................................................... 14 5.5. U-NII-2C and U-NII-3 ........................................................................................................................... 15 5.6. Initial Test Position Procedure ........................................................................................................ 15 5.7. 2.4 GHz SAR Test Requirements .................................................................................................... 15 5.8. OFDM Transmission Mode and SAR Test Channel Selection ................................................. 15 5.9. Initial Test Configuration Procedure ...................................................................................…

Text truncated - open the document above for the full version.

KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Report No.: KES-RF-20T0033 Page ( 2 ) of ( 26 ) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP-7081-06 Rev. 7KESA4 Revision history RevisionDate of issueTest report No.Description -2020.02.24KES-RF-20T0033Initial KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Report No.: KES-RF-20T0033 Page ( 3 ) of ( 26 ) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP-7081-06 Rev. 7KESA4 TABLE OF CONTENTS 1.General information ................................................................................................................................................... 4 1.1.EUT description ........................................................................................................................................ 4 1.2.Test configuration ...................................................................................................................................... 5 1.3.Device modifications................................................................................................................................. 5 1.4.Information about derivative model .......................................................................................................... 5 1.5.Accessory information............................................................................................................................... 5 1.6.Measurement Uncertainty ......................................................................................................................... 5 1.7.Frequency/channel operations ................................................................................................................... 6 1.8.Worst case data rate ................................................................................................................................... 6 2.Summary of tests ....................................................................................................................................................... 7 3.Test results.................................................................................................................................................................. 8 3.1.Radiated restricted band and emissions ..................................................................................................... 8 3.2.AC conducted emissions ......................................................................................................................... 22 Appendix A.Measurement equipment ......................................................................................................................... 24 Appendix B.Test setup photos ..................................................................................................................................... 25 KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Report No.: KES-RF-20T0033 Page ( 4 ) of ( 26 ) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP-7081-06 Rev. 7KESA4 1.General information Applicant: Applicant address: Test site: Test site address: FCC/IC rule part(s): FCC ID: BONTECH Co., Ltd. Digital Empire D-building #1201~#1204, 16, Deogyeong-daero 1556 beon-gil, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea 473-21, Gayeo-ro, Yeoju-si, Gyeonggi-do, Korea 15.407 2AVRHBT-DA22W Test device serial No.:ProductionPre-productionEngineering 1.1.EUT description Equipment under testFlat Panel Digital X-ray Detector Frequency range 2 422㎒~ 2 452㎒(11n_HT40) UNII-1 5 210㎒(11ac_VHT80) UNII-3 5 775㎒(11ac_VHT80) Model:BT-DA22W Derivative ModelBT-DB22W Modulation techniqueDSSS, OFDM Number of channels 2 422㎒~ 2 452㎒(11n_HT40) : 7 ch 5 210㎒(11ac_VHT80) : 1ch 5 775㎒(11ac_VHT80) : 1ch Antenna specification Antenna type(2.4㎓WIFI) : PCB antenna, Peak gain : 2.5㏈i Antenna type(5㎓WIFI) : PCB antenna, Peak gain : 4.5㏈i Power sourceAC 120 V (Adapter DC output 12 V) H/W versionV1.0 S/W versionV1.1 KES Co., Ltd. 3701, 40, Simin-daero 365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Report No.: KES-RF-20T0033 Page ( 5 ) of ( 26 ) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. The authenticity of the test report, contact [email protected] KES-QP-7081-06 Rev. 7KESA4 1.2. Test configuration The BONTECH Co., Ltd. // BT-DA22W // FCC ID: 2AVRHBT-DA22W was tested according to the specification of EUT, the EUT must comply with following standards and KDB documents. FCC Part 15.407 KDB 789033 D02 v02r01 ANSI C63.10-2013 1.3. Device modifications N/A 1.4. Information about derivative model Division Basic modelVariant model BT-DA22WBT-DB22W Dimension (384 x 460 x 15)㎜(384 x 460 x 15)㎜ Scintillator type CslGdos 1.5.Accessory information EquipmentManufacturerModelSerial No. Control boxBONTECH …

Text truncated - open the document above for the full version.

MRT Technology (Suzhou) Co., Ltd Report No.: 1503RSU02902 Phone: +86-512-66308358 Report Version: V02 Fax: +86-512-66308368 Issue Date: 06-25-2015 Web: www.mrt-cert.com FCC ID: TK4WLE600VX Page Number: 1 of 483 FCC ID: TK4WLE600VX APPLICANT: Compex Systems Pte Ltd Application Type: Certification Product: 802.11ac Dual Band Module Model No.: WLE600VX Brand Name: COMPEX FCC Classification: Unlicensed National Information Infrastructure (UNII) FCC Rule Part(s): Part 15.407 Test Procedure(s): ANSI C63.10-2013, KDB 789033 D02 UNII Test Procedures v01, KDB 662911 D01v02r01, KDB 644545 D03v01 Test Date: Mar. 16 ~ Jun. 17, 2015 MEASUREMENT REPORT FCC PART 15.407 WLAN 802.11a/n/ac Reviewed By : ( Robin Wu ) Approved By : ( Marlin Chen ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in KDB 789033 D02v01. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 1 503RSU02902 FCC ID: TK4WLE600VX Page Number: 2 of 483 Revision History Report No. Version Description Issue Date 1503RSU02902 Rev. 01 Initial report 06-17-2015 1503RSU02902 Rev. 02 Add some test descriptions 06-25-2015 Report No.: 1 503RSU02902 FCC ID: TK4WLE600VX Page Number: 3 of 483 CONTENTS Description Page §2.1033 General Information ......................................................................................................... 6 1. INTRODUCTION ..................................................................................................................... 7 1.1. Scope ........................................................................................................................... 7 1.2. MRT Test Location ....................................................................................................... 7 2. PRODUCT INFORMATION ..................................................................................................... 8 2.1. Equipment Description .................................................................................................. 8 2.2. Applicable Standards .................................................................................................... 8 2.3. Operation Frequency / Channel list ............................................................................... 9 2.4. Description of Available Antennas ................................................................................ 11 2.5. Description of Antenna RF Port .................................................................................. 12 2.6. Test Mode .................................................................................................................. 12 2.7. Test Software .............................................................................................................. 13 2.8. Device Capabilities ..................................................................................................... 17 2.9. Test Configuration ...................................................................................................... 19 2.10. EMI Suppression Device(s)/Modifications ................................................................... 19 2.11. Labeling Requirements ............................................................................................... 19 3. DESCRIPTION OF TEST ...................................................................................................... 20 3.1. Evaluation Procedure ................................................................................................. 20 3.2. AC Line Conducted Emissions ................................................................................... 20 3.3. Radiated Emissions .................................................................................................... 21 4. ANTENNA REQUIREMENTS ................................................................................................ 22 5. TEST EQUIPMENT CALIBRATION DATE ............................................................................ 23 6. MEASUREMENT UNCERTAINTY ......................................................................................... 24 7. TEST RESULT ...................................................................................................................... 25 7.1. Summary .................................................................................................................... 25 7.2. 26dB Bandwidth Measurement ................................................................................... 27 7.2.1. Test Limit .................................................................................................................... 27 7.2.2. Test Procedure used ................................................................................................... 27 7.2.3. Test Setting ................................................................................................................. 27 7.2.4. Test Setup .................................................................................................................. 27 7.2.5. Test Result .................................................................................................................. 28 7.3. 6dB Bandwidth Measurement ..................................................................................... 42 Report No.: 1 503RSU02902 FCC ID: TK4WLE600VX Page Number: 4 of 483 7.3.1. Test Limit .................................................................................................................... 42 7.3.2. Test Procedure used ................................................................................................... 42 7.3.3. Test Setting ...…

Text truncated - open the document above for the full version.

Report No.: 1 503RSU02902 FCC ID: TK4WLE600VX Page Number: 36 of 483 802.11ac-VHT20 26dB Bandwidth & 99% Bandwidth Channel 36 ( 5180MHz) Channel 44 (5220MHz) . Channel 48 (5240MHz) Channel 52 (5260MHz) Channel 60 (5300MHz) Channel 64 (5320MHz) Report No.: 1 503RSU02902 FCC ID: TK4WLE600VX Page Number: 37 of 483 Channel 100 ( 5500MHz) Channel 120 (5600MHz) Channel 140 (5700MHz) Channel 144 (5720MHz) Channel 149 (5745MHz) Channel 157 (5785MHz) Report No.: 1 503RSU02902 FCC ID: TK4WLE600VX Page Number: 38 of 483 Channel 165 ( 5825MHz) Report No.: 1 503RSU02902 FCC ID: TK4WLE600VX Page Number: 39 of 483 802.11ac-VHT40 26dB Bandwidth & 99% Bandwidth Channel 38 ( 5190MHz) Channel 46 (5230MHz) Channel 54 (5270MHz) Channel 62 (5310MHz) Channel 102 (5510MHz) Channel 118 (5590MHz) Report No.: 1 503RSU02902 FCC ID: TK4WLE600VX Page Number: 40 of 483 Channel 134 ( 5670MHz) Channel 142 (5710MHz) Channel 151 (5755MHz) Channel 159 (5795MHz) Report No.: 1 503RSU02902 FCC ID: TK4WLE600VX Page Number: 41 of 483 802.11ac-VHT80 26dB Bandwidth & 99% Bandwidth Channel 42 ( 5210MHz) Channel 58 (5290MHz) Channel 106 (5530MHz) Channel 122 (5610MHz) Channel 138 (5690MHz) Channel 155 ( 5755MHz) Report No.: 1 503RSU02902 FCC ID: TK4WLE600VX Page Number: 42 of 483 7.3. 6dB Bandwidth Measurement 7.3.1. Test Limit The minimum 6dB bandwidth shall be at least 500 kHz. 7.3.2. Test Procedure used KDB 789033 D02v01 – Section C.2 7.3.3. Test Setting 1. Set center frequency to the nominal EUT channel center frequency. 2. RBW = 100 kHz. 3. VBW ≧ 3 × RBW. 4. Detector = Peak. 5. Trace mode = max hold. 6. Sweep = auto couple. 7. Allow the trace to stabilize. 8. Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the maximum le…

Text truncated - open the document above for the full version.