
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Battery Switch Motor Server Battery Steering server Switch Motor cable Motor Power cable Receiver, electronic control combo This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC StatementFCC StatementFCC Statement ISED Statement English: This device complies with Part 15 of the FCC Rules [and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS standard(s)]. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. The digital apparatus complies with Canadian CAN ICES3 (B)/NMB3(B). French: L’émetteur/récepteurexempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et DéveloppementéconomiqueCanada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. l'appareil numérique du ciem conforme canadien peut 3 (b) / nmb 3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la conformité. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. RF Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be usedin portable exposurecondition without restriction. L'appareil a été évalué pour répondre aux exigences générales d'exposition aux radiofréquences. L'appareil peut être utilisé en condition d'exposition portable sans restriction.
CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: 2020/05/08 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2AVRN-KYHT01 KYHT-12 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name: Cindy Ding Company: ZHUHAI KYMODEL HOBBY CO.,LTD Address: Room NO.518,5th floor (KeHui building) ,Zijing Rd #63, Xiangzhou Zone, Zhuhai City, Guangdong Province, China Phone: + 86-18029915298 Fax: N/A E-Mail: [email protected]
ZHUHAI KYMODEL HOBBY CO.,LTD Room NO.518,5th floor (KeHui building) ,Zijing Rd #63, Xiangzhou Zone, Zhuhai City, Guangdong Province, China Tel: + 86-18029915298 E-mail: [email protected] Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 5/08/2020 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AVRN-KYHT01 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name: Cindy Ding Company: ZHUHAI KYMODEL HOBBY CO.,LTD Address: Room NO.518,5th floor (KeHui building), Zijing Rd #63, Xiangzhou Zone, Zhuhai City, Guangdong Province, China Phone: + 86-18029915298 Fax: N/A E-Mail: [email protected]
FCC ID: 2AVRN-KYHT01 IC: 25809-KYHT01 FCC ID: 2AVRN-KYHT01 IC: 25809-KYHT01
FCC ID: 2AVRN-KYHT01 IC: 25809-KYHT01 Model: KYHT-12 FCC ID: 2AVRN-KYHT01 IC: 25809-KYHT01 This device complies with part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2AVRN-KYHT01 IC: 25809-KYHT01 Antenna
Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong TEST REPORT FCC PART 15 SUBPART C 15.249 & RSS-210 Report Reference No. .....................: FCC ID. .............................................: GTS20200109007-1-12 2AVRN-KYHT01 IC ..................................................... : 25809-KYHT01 Compiled by ( position+printed name+signature) .. : File administrators Jimmy Wang Supervised by ( position+printed name+signature) .. : Test Engineer Aaron Tan Approved by ( position+printed name+signature) .. : Manager Jason Hu Date of issue ..................................... : Jan. 15, 2020 Representative Laboratory Name .: Shenzhen Global Test Service Co., Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong Applicant’s name ............................ : ZHUHAI KYMODEL HOBBY CO.,LTD Address ............................................ : Room NO.518,5th floor (KeHui building) ,Zijing Rd #63, Xiangzhou Zone, Zhuhai City, Guangdong Province, China Test specification ...........................: Standard ........................................... : 47 CFR FCC Part 15 Subpart C 15.249 & RSS-210 Issue 10, December 2019 TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: Remote control Trade Mark ....................................... : N/A Manufacturer .................................... : ZHUHAI KYMODEL HOBBY CO.,LTD Model/Type reference(HVIN) ........... : KYHT-12 List Model ......................................... : N/A Ratings ............................................. : DC 6.0V from battery Result................................................ : PASS Report No.: GTS20200109007-1-12 Page 2 of 23 T E S T R E P O R T Test Report No. : GTS20200109007-1-12 Jan. 15, 2020 ____________________________________________________________________________________ Date of issue Equipment under Test : Remote control Model /Type(HVIN) : KYHT-12 Listed Models : N/A Applicant : ZHUHAI KYMODEL HOBBY CO.,LTD Address : Room NO.518,5th floor (KeHui building) ,Zijing Rd #63, Xiangzhou Zone, Zhuhai City, Guangdong Province, China Manufacturer : ZHUHAI KYMODEL HOBBY CO.,LTD Address : Room NO.518,5th floor (KeHui building) ,Zijing Rd #63, Xiangzhou Zone, Zhuhai City, Guangdong Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20200109007-1-12 Page 3 of 23 Contents 1 T E S T S T A N D A R D S ................................................................. 4 2 S U M M A R Y ............................................................................ 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Equipment Under Test 5 2.4 Short description of the Equipment under Test (EUT) 5 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Special Accessories 6 2.8 Related Submittal(s) / Grant (s) 6 2.9 Modifications 6 3 T E S T E NV I R O N M E N T .............................................................. 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Summary of measurement results 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 8 4 T E S T C O N D I T I O N S A N D R E S U L T S ........................................... 10 4.1 Conducted Emissions Test 10 4.2 Radiated Emissions and Band Edge 11 4.3 Occupied Bandwidth Measurement 17 4.4 Antenna Requirement 19 5 T E S T S E T U P P H O T O S O F T H E E U T ......................................... 20 6 P H O T O S O F T H E E U T ........................................................... 21 Report No.: GTS20200109007-1-12 Page 4 of 23 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.249: Operation within the bands 902 - 928 MHz, 2400 - 2483.5 MHz, 5725 - 5875 MHz, and 24.0 - 24.25 GHz. RSS-210 Issue 10: Licence-Exempt Radio Apparatus: Category I Equipment. RSS-Gen Issue 5: General Requirements for Compliance of Radio Apparatus ANSI C63.10: 2013: American National Standard for Testing Unlicensed Wireless Devices Report No.: GTS20200109007-1-12 Page 5 of 23 2 S U M M A R Y 2.1 General Remarks Date of receipt of test sample : Jan. 02, 2020 Testing commenced on : Jan. 03, 2020 Testing concluded on : Jan.14, 2020 2.2 Product Description Product Name: Remote control Model/Type reference(HVIN): KYHT-12 Power supply: DC 6.0V from battery Hardwrae Version: HY-HT12-V1.1 Software Version: V1.0 Test samples ID: GTS20200109007-1-12# 2.4GHz wireless Modulation: GFSK Operation frequency: 2404MHz to 2480MHz Channel number: 77 Channel separation: 1 MHz Antenna type: Integral antenna Antenna gain: 2.0dBi 2.3 Equipment Under Test Power supply system utilised Power supply voltage : ○ 230V / 50 Hz ○ 120V / 60Hz ○ 12 V DC ○ 24 V DC ● Other (specified in blank below) DC 6..0V from battery 2.4 Short description of the Equipment under Test (EUT) This is a Remote control. For more details, refer to the user’s manual o…
Text truncated - open the document above for the full version.
FCC ID: 2AVRN-KYHT01 IC: 25809-KYHT01
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | - |

Remote control
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter