2AVS6-PAC027LED SENSOR LIGHT WITH CAMERA

1 Motion Activated Dual Head Security Light with Camera Model: PAC018 , PAC027 Please read all instructions thoroughly and carefully prior to installing this product. Retain these instructions for future reference. We assumes no liability or responsibility for claims arising from improper installation or improper use. Failure to follow these instructions could result in voiding the product warranty. IMPORTANT SAFETY INSTRUCTIONS Before you begin installing, servicing, or maintenance of this product, follow these general precautions.  To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions and other hazards please read all warnings and instructions included with and on this product prior to installation.  For commercial installation: service and maintenance of this product should be performed by a qualified, licensed electrician.  For residential installation: If you are unsure about the installation or maintenance of this product, consult a qualified licensed electrician.  Do not mount the unit against flammable surfaces.  This product is intended to be used outdoors, and be subject to the elements; such as rain and snow and we recommend it to be mounted at least 6’ 6” off the ground  This LED product must be powered directly to a switched circuit.  Make sure that where this fixture will be mounted is structurally sound and that it will support the weight of this fixture  This product should not be used in areas with limited ventilation or high ambient temperatures.  This product is intended to be connected to a properly installed and grounded UL listed junction box. WARNING: RISK OF ELECTRICAL SHOCK  Turn off electrical power at fuse or circuit breaker box before wiring product to the power supply.  Verify voltage is 100V‐240V before installing.  Make all electrical and grounded connections in accordance with the National Electric Code and any applicable local code requirements.  All wiring connections should be capped with UL listed wire connectors. CAUTION: RISK OF PRODUCT DAMAGE  Never connect fixture with power on.  Do not mount or support product in a manner that can cut the outer wire jacket or damage the wire insulation.  Avoid covering LED products with insulation, foam, or other materials that will prevent convection or conduction cooling.  Never connect an LED product directly to dimmer packs, occupancy sensors, timing devices, or other related control devices, unless individual product specifications deem otherwis e.  LED products are polarity sensitive, ensure proper polarity before installation.  Electrostatic Discharge (ESD) can cause damage to LED products. Wear personal grounding equipment during installation and service of the product. 2  Do not touch the individual electronic components, it may cause ESD (Electronic Discharge), shorten lamp life or alter performance. CAUTION: RISK OF INJURY  Wear gloves and safety glasses at all times when removing fixture from carton, installing or servicing the product.  Avoid direct eye exposure to the light source while it is on.  LED LIGHTS ARE EXTREMELY BRIGHT, UNDER NO CIRCUMSTANCES SHOULD YOU LOOK DIRECTLY INTO AN LED LIGHT, THIS MAY CAUSE IRREPARABLE DAMAGE TO THE EYES.  Please dispose of packaging materials and account for all small parts as these can be hazardous to small children. WARNING: RISK OF BURN  Allow fixture to cool completely before handling.  Do not exceed maximum voltage marked on the label.  Keep combustible and other materials that can burn away from the light, lamp, and lens. Specfications: Electrical Rating 100-240VAC /35W Motion Detection Maximum1.80degree,10m Lumen 2600lm Colour temperature 3000k Reording resolution 1080p Clouding Reconrding Yes Local Recording Yes Micro SD card Yes(not includes) Waterproof IP55 Installation Instructions ** Note: this fixture can be wall or eave mounted ** Part DescriptionQuantity A Light Fixture 1 B Plastic Screw Cover 1 C Cross Bar (Included, optional use)1 D Light Fixture Screw (pre‐installed)1 E Quick Connect Mounting Plate 1 F Long Mounting Screws (one pre‐installed onto product)2 G Motion Detector 1 H Short Mounting Screws (optional use)2 Silicon Sealant recommended (not included) Tools Required for Installation: Phillips screwdriver, level 3 MOUNTING AND WIRING THE LIGHT NOTE: DO NOT MOUNT ON THE GROUND, RECOMMENDED INSTALLATION sHEIGHT IS 6 ½ FEET TO 10 FEET ** Before you begin make sure that your power is turned off at your circuit breaker box ** ** Do not rely on the switch power being turned off **** Existing electrical wires from mounting surface 4 ADJUSTING YOUR LIGHT HEADS Your light heads can be adjusted by turning the individual light head to desired position. You can also adjust your light head up and down to your desired position. Indicator light: Note: Fixture can be wall mounted or eave mounted. 5 Wall mounted Eave mounte\ (Light fixture and sensor should be mounted as shown above when installed (depending upon type of installation). APP User guide: Setting light through mobile device.Search”Guard 720”or “Swann security “in IOS APP store or in Android Google play.Install the”Guard 720” or” Swann security “App onto the device.(Take Guard 720 as an example) 1. * Register a new account: 2. 3 6 3. TROUBLE SHOOTING If the light does not come on:  Verify the power is turned on at the switch and breaker  Verify that the product is properly wired  Verify that the line voltage is correct (100V‐240V) If the manual override stays on after dawn  The ambient light lever may be too low (not enough light) FCC WARNING Any Changes expressly or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference receiv…

Text truncated - open the document above for the full version.

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS PAC018 PAC027

Label location:

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS PAC018 Antenna PAC027 Antenna

FCC PART 15.247 RSS-GEN, ISSUE 5, FEBRUARY 2021 AMENDMENT 2 RSS-247, ISSUE 2, FEBRUARY 2017 TEST REPORT For INNOVATION&PERFECT ENTERPRISES LIMITED Rm 804, Sino Centre,582-592 Nathan Rd., Kn,Hongkong,China. Report Type: Original Report Product Name: LED SENSOR LIGHT WITH CAMERA Re port Number: RDG200922052-00 Re port Date: 2021-07-28 Reviewed By: Ivan Cao Assistant Manager Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn FCC ID: 2AVS6-PAC027 IC: 26959-PAC027 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200922052-00 Page 2 of 58 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 DECLARATIONS ............................................................................................................................................................ 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 9 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS ........................................................................................................ 9 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 9 SUMMARY OF TEST RESULTS ............................................................................................................................. 10 FCC §15.247 (i) & §1.1310 & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ....................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 RSS-102 § 2.5.2 - EXEMPTION LIMITS FOR ROUTINE EVALUATION – RF EXPOSURE EVALUATION12 APPLICABLE STANDARD ............................................................................................................................................ 12 FCC §15.203& RSS-GEN CLAUSE 6.8 - ANTENNA REQUIREMENT .............................................................. 13 APPLICABLE STANDARD ............................................................................................................................................ 13 ANTENNA INFORMATION AND CONNECTOR CONSTRUCTION ..................................................................................... 14 FCC §15.207 (a) & RSS-GEN CLAUSE 8.8– AC LINE CONDUCTED EMISSIONS ......................................... 15 APPLICABLE STANDARD ............................................................................................................................................ 15 EUT SETUP ................................................................................................................................................................ 15 EMI TEST RECEIVER SETUP ....................................................................................................................................... 15 TEST PROCEDURE ...................................................................................................................................................... 15 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 16 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 16 TEST DATA ................................................................................................................................................................ 17 FCC §15.209, §15.205, §15.247(d) & RSS-247 CLAUSE 5.5, RSS-GEN CLAUSE 8.10- SPURIOUS EMISSIONS ................................................................................................................................................................. 19 APPLICABLE STANDARD ............................................................................................................................................ 19 EUT SETUP ................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View