2AVTBRWD102Driverbox

ROMWARE DRIVERBOX ™ USER MANUAL 1.3-EN © 2021 Rombit NV This manual, including all illustrations, is copyright protected. Any changes to the contents or the publication of extracts of this document is prohibited. Rombit reserves the right to alter, correct, and/or improve documentation and the products described without giving prior notice. The user is responsible to verify the suitability and intended use of the products for a specific application, in particular with regard to observing the applicable standards and regulations. All information made available in this document is supplied without any accompanying guarantee, whether expressly mentioned, implied or tacitly assumed. ROMWARE DRIVERBOX ™ USER MANUAL 1.3-EN 4 1.FOR YOUR SAFETY Before using this product, carefully read this user manual. Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to Romware DriverBox™ or other property. Do not dispose of this manual. Ensure that this information is retained and appropriately used by the product user. DEFINITION OF ALERT SYMBOLS The following alert symbols are used in this document to indicate and highlight areas of the associated text that require a greater awareness by the user. WARNING Indicates a hazard with a high risk level. If this hazardous situation is not avoided, it may result in death or serious injury. CAUTION Indicates a potentially hazardous situation. If this is not avoided, injuries or damage to the product or the environment may occur. It may also be used to alert against unsafe practices. NOTICE Indicates additional information on how to use the product. 5 INTENDED USE Romware DriverBox™ is an accessory device for Romware™ worker safety and site security products. It can be used as a component of a site-installed system to help warn users for unsafe situations, such as vehicle driving behaviour, keeping a safe distance from people or man-machine collisions. Romware DriverBox™ is designed for use in industrial environments. QUALIFICATION OF USERS ►Users must fully understand and strictly observe the instructions. Use the product only for the purposes specified in the Intended Use section of this document. Comply with all local and national rules and regulations associated with this product. ►Users of Romware DriverBox™ must be familiar with the relevant safety concepts of the industrial environment they are operating in, as well as applicable standards and other regulations. Always obey site-specific signs and instructions. REPAIR AND MODIFICATIONS ►Only trained and competent personnel are permitted to inspect, repair and service Romware DriverBox™. ►Use only original Romware™ parts and accessories for using and maintaining this product. Otherwise, the correct functioning of the product could be impaired. Rombit recommends a Romware™ service contract for all maintenance activities and that all repairs are carried out by Rombit. CAUTION Modifications to any component of Romware DriverBox™ are not permitted, as they can endanger your safety or damage the device. Disassembling Romware DriverBox™ may cause damage, result in loss of water resistance, and may cause injury to the user. 6 WARNING SAFETY PRECAUTIONS RF EXPOSURE AND INTERFERENCE Romware DriverBox™ uses radio signals to communicate with other devices. It is designed, tested, and manufactured to comply with regulations governing radio frequency emissions. Even so, radio-signal emitting devices can negatively affect the operation of other electronic equipment, causing them to malfunction. Always turn off Romware DriverBox™ when use of radio equipment is prohibited, such as while traveling in aircraft, or when asked to do so by authorities. POSSIBLE MEDICAL DEVICE INTERFERENCE Romware DriverBox™ contains components that emit electromagnetic fields. This may interfere with medical devices, such as pacemakers and defibrillators. Consult your physician and medical device manufacturer for information specific to your medical device and whether you need to maintain a safe distance of separation between your medical device and Romware DriverBox™. If you suspect Romware DriverBox™ is interfering with your medical device, stop using the Romware™ system immediately and consult your physician. ROMWARE DRIVERBOX™ IS NOT A MEDICAL DEVICE Romware DriverBox™ is not a medical device and should not be used as a substitute for professional medical judgement. It is not designed or intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of any condition or disease. NOT FOR USE IN A POTENTIALLY EXPLOSIVE ENVIRONMENT Using Romware DriverBox™ in any area with a potentially explosive atmosphere, such as areas where the air contains high levels of flammable chemicals, vapors, or particles (such as grain, dust, or metal powders), may be hazardous. Exposing Romware DriverBox™ to environments having high concentrations of industrial chemicals may damage or impair Romware DriverBox™ functionality. VIBRATION AND SHOCK RESISTANCE Romware DriverBox™ was designed and tested to withstand the harsh environment of typical industrial sites. When implementing Romware DriverBox™ in extreme conditions, such as applications subject to high accelerations, extreme vibration or temperature, additional precautions and integration testing are required. HIGH-CONSEQUENCE ACTIVITIES AND SAFETY INTERLOCK Romware DriverBox™ is not intended for use where the failure of the device could directly lead to death, personal injury, or severe environmental damage. Romware DriverBox™ is intended and marketed as Assistive Technology: a system intended to help warn users of potentially unsafe situations and to raise awareness of the risks involved. As such, it is NOT intended to be used as a safety component of a machine setup as meant in article 2(c) of the European Machine Directive 2006/42/EC. 6 7 FUNCTIONAL DESCRIPTION ROMWARE DRIVERBOX™ ►Romware DriverBox™ is mean…

Text truncated - open the document above for the full version.

M-Anchor 100 and Driverbox - UWB Channels UWB channels Date: 04/03/2022 To whom it may concern: We, Rombit NV Meir 30, Antwerpen, Belgium Zip code 2000 herebydeclarethatourProductsRomwareM-Anchor100andDriverboxcontainaUWBtransceiver capable of transmitting on UWB channel 2 and 5. Astheseareworld-widemarketeddevices,anddifferentregionsposerestrictionsonchannels allowed,therelevantchannelsareswitchedonduringinstallationofthedevicebyaRombit-certified technician. ThischannelconfigurationisdoneremotelybyRombitandisnotaccessiblebytheend-clientor other parties in any way. Theend-clientisinformedofthisrestriction,andisrequiredtosignawaiverinforminghimofhis responsibilitywhentransportingthedeviceoutsidetheintendedregionwithouthavingit reconfigured. Sincerely, By:Jan Vercammen Title:CEO Rombit Telephone:+32 3 369 75 00 e-mail:[email protected] 1/1 Theinformationcontainedinthisdocumentisconfidentialandsubjecttocopyrightlaws.Itisintendedsolelyfortheuseoftheindividualorentitytowhomitisaddressedto.Ifyouare not the intended recipient, please do not read, copy, use or disclose any content of this document to others. DocuSign Envelope ID: DAFEB0E4-F0EE-4040-AB59-8B1CE662FE83

Driverbox - Statements for FCC Agent letter Date: 15/02/2022 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID:2AVTBRWD102 To whom it may concern: We, Rombit NV Meir 30, Antwerpen, Belgium Zip code 2000 hereby authorize, DEKRA Testing and Certification S.A.U. Parque Tecnológico de Andalucía C/Severo Ochoa, 2 & 6 | 29590 | Málaga | Spain Agent:Álvaro Corrales Sedeño e-mail:[email protected] Phone:+34 952 619 198 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, By:Jan Vercammen Title:CEO Rombit Telephone:+32 3 369 75 00 e-mail:[email protected] 1/4 The information contained in this document is confidential and subject to copyright laws. It is intended solely for the use of the individual or entity to whom it is addressed to. If you are not the intended recipient, please do not read, copy, use or disclose any content of this document to others. 


     

Driverbox - Statements for FCC Confidentiality request Date: 15/02/2022 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID:2AVTBRWD102 To whom it may concern: We, Rombit NV Meir 30, Antwerpen, Belgium Zip code 2000 hereby request requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public pursuant to §0.457(d)(1)(ii) and §0.459 of the Commission’s Rules (47 C.F.R.) and §552 (b)(4) of the Freedom of Information Act, For the product stated above, we request that the following information be withheld from public disclose: Type of Confidentiality RequestedExhibit ☐ Short Term ☒ PermanentBlock Diagrams ☐ Short Term ☒ PermanentOperation Description ☐ Short Term ☒ PermanentSchematics ☐ Short Term ☐ PermanentParts List & Placement/BOM ☐ Short Term ☐ PermanentTune-Up Procedure ☒ Short TermTest Setup Photos ☒ Short TermUser’s Manual ☒ Short TermExternal Photos ☒ Short TermInternal Photos Permanent Confidentiality: The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. 2/4 The information contained in this document is confidential and subject to copyright laws. It is intended solely for the use of the individual or entity to whom it is addressed to. If you are not the intended recipient, please do not read, copy, use or disclose any content of this document to others. 


      Driverbox - Statements for FCC Short-Term Confidentiality: We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short term confidentiality is: 45 days from grant date marked ☐ 90 days from grant date marked ☐ 135 days from grant date marked ☐ 180 days from grant date marked ☒ Specific date: We are also aware that we are responsible to notify DEKRA Testing and Certification S.A.U. in the event information regarding the product or the product is made available to the public. DEKRA Testing and Certification S.A.U. will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:Jan Vercammen Title:CEO Rombit Telephone:+32 3 369 75 00 e-mail:[email protected] 3/4 The information contained in this document is confidential and subject to copyright laws. It is intended solely for the use of the individual or entity to whom it is addressed to. If you are not the intended recipient, please do not read, copy, use or disclose any content of this document to others. 


     

Driverbox - Statements for FCC Supplier’s Declaration of Conformity (SDoC) Date: 15/02/2022 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID:2AVTBRWD102 To whom it may concern: We, Rombit NV Meir 30, Antwerpen, Belgium Zip code 2000 pursuant to §15.101 of the Commission’s Rules (47 C.F.R.), hereby declare that the device above mentioned is classified under the following equipment class/classes: ☒ JABPart 15 Class B Digital Device ☐ JADPart 15 Class A Digital Device ☐ JAVOther Non-Digital SDoC Devices ☐ JBPPart 15 Class B Computing Device Peripheral ☐ JBCPart 15 Class B Computing Device/Personal Computer ☐ CXXCommunications Rcvr for use w/ licensed Tx and CBs ☐ CRRSuperregenerative Receiver ☐ CYYCommunications Receiver used w/Pt 15 Transmitter ☐ HIDPart 15 TV Interface Device and we will follow the Supplier’s Declaration of Conformity authorization procedure prior to the initiation of marketing. Sincerely, By:Jan Vercammen Title: CEO Rombit Telephone: +32 3 369 75 00 e-mail: [email protected] 4/4 The information contained in this document is confidential and subject to copyright laws. It is intended solely for the use of the individual or entity to whom it is addressed to. If you are not the intended recipient, please do not read, copy, use or disclose any content of this document to others. 


     

45 A ATTACH BOPLA UGC-1 WITH NOTCHES FACING UPWARDS DETAIL A SCALE 2 : 1 TYPE PLATE ADAPTOR AND TYPE PLATE ASSEMBLY PROJECT DriverBox (Rev. B) SCALE 1:2PVT-1 PHASE 1.0 REVISIONAUTHOR DDW DATE 2020/04/26 ROMWARE CONFIDENTIAL AND PROPRIETARY - DO NOT DISTRIBUTE

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 67871RAN.005A2 2022-03-07 Test report No: NIE: 67871RAN.005A2 Assessment report RF EXPOSURE REPORT ACCORDING TO FCC 47 CFR Part 2.1091 (*) Identification of item under evaluation Driverbox LED-display (*) Trademark Romware (*) Model and /or type reference Driverbox (*) Other identification of the product HW version: 02 SW version: 1.2.1 FCC ID: 2AVTBRWD102 IC: 27593-RWD102 (*) Features UWB (*) Manufacturer Rombit Meir 30, 2000 Antwerpen, Belgium Test method requested, standard FCC 47 CFR Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. Summary IN COMPLIANCE Approved by (name / position & signature) Rafael López Martín EMC Consumer & RF Lab. Manager Date of issue 2022-03-07 Report template No FAN36_02 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 67871RAN.005A2 Page 2 of 10 2022-03-07 Index Competences and guarantees .................................................................................................... 3 General conditions ...................................................................................................................... 3 Data provided by the client .......................................................................................................... 3 Identification of the client............................................................................................................. 3 Document history ........................................................................................................................ 4 Appendix A: FCC RF Exposure ................................................................................................... 5 General description of the device under evaluation ................................................................ 6 RF Exposure Assessment result and verdict .......................................................................... 7 Appendix B: FCC RF Exposure information ................................................................................ 8 RF Exposure evaluation for mobile devices ............................................................................ 9 MPE Evaluation .................................................................................................................... 10 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 67871RAN.005A2 Page 3 of 10 2022-03-07 Competences and guarantees In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification, S.A.U. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification, S.A.U. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification, S.A.U. at the time of performance of the test. DEKRA Testing and Certification, S.A.U. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Assessment Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Testing and Certification, S.A.U. General conditions 1. This report is only referred to the item that has undergone the assessment. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification, S.A.U. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Testing and Certification, S.A.U. and the Accreditation Bodies Data provided by the client The following data has been provided by the client: 1. Information relating to the description of the sample ("Identification of the item under evaluation", "Trademark", "Model and/or type reference", “General description of the device” and "Other identification of the product"). 2. Maximum output power, maximum antenna gain and use distance information. 3. The device is a driver LED matrix display unit with integrated UWB transceiver, to be connected and powered over CANbus to the M-anchor. DEKRA Testing and Certification, S.A.U. declines any responsibility with respect to the information provided by the client and that may affect the validity of results. Identification of the client Rombit Meir 30, 2000 Antwerpen, Belgium DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 67871RAN.005A2 Page 4 of 10 2022-03-07 Document history Report number Date Description 67871RAN.005 2021-12-17 First release 67871RAN.005A1 2022-03-04 Second release: typo correction on IC number. This modification test report cancels and replaces the test report 67871RAN.005. 67871RAN.005A2 2022-03-07 Third release: UWB values on table 1 have been updated. This modification test report cancels and replaces the test report 67871RAN.005A1. DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 …

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 67871RRF.002A1 2022-03-04 ISED CABid: ES1909 Test Report No: NIE: 67871RRF.002 Test Report USA FCC Part 15.519, 15.521, 15.209 CANADA RSS-220, RSS-Gen (*) Identification of item tested Driverbox LED-display (*) Trademark Romware (*) Model and /or type reference Driverbox Other identification of the product HW version: 02 SW version: 1.2.1 FCC ID: 2AVTBRWD102 IC: 27593-RWD102 (*) Features UWB Applicant Rombit Meir 30, 2000 Antwerpen, Belgium Test method requested, standard USA FCC Part 15.519 (10-1-20 Edition): Technical requirements for hand held UWB systems. USA FCC Part 15.521 (10-1-20 Edition): Technical requirements applicable to all UWB devices. USA FCC Part 15.209 (10-1-20 Edition): Radiated emission limits; general requirements. CANADA RSS-220 Issue 1 amendment 1 (July 2018). CANADA RSS-Gen Issue 5 amendment 1 (March 2019). ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices. Summary IN COMPLIANCE Approved by (name / position & signature) José de la Plaza Fernández EMC Lab Director Date of issue 2022-03-04 Report template No FDT08_23 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 67871RRF.002A1 Page 2 of 39 2022-03-04 Index Competences and guarantees .................................................................................................... 3 General conditions ...................................................................................................................... 3 Uncertainty ................................................................................................................................. 3 Data provided by the client .......................................................................................................... 3 Usage of samples ....................................................................................................................... 4 Test sample description .............................................................................................................. 4 Identification of the client............................................................................................................. 5 Testing period and place ............................................................................................................. 5 Document history ........................................................................................................................ 5 Environmental conditions ............................................................................................................ 6 Remarks and comments ............................................................................................................. 6 Testing verdicts ........................................................................................................................... 6 Summary .................................................................................................................................... 7 Appendix A: Test results. Ultra-Wideband (UWB) ....................................................................... 8 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 67871RRF.002A1 Page 3 of 39 2022-03-04 Competences and guarantees DEKRA Testing and Certification S.A.U. is a testing laboratory accredited by the National Accreditation Body (ENAC -Entidad Nacional de Acreditación), to perform the tests indicated in the Certificate No. 51/LE 147. DEKRA Testing and Certification is a FCC-recognized accredited testing laboratory with appropriate scope of accreditation that covers the performed tests in this report. DEKRA Testing and Certification is an ISED-recognized accredited testing laboratory, CABid: ES1909, with the appropriate scope of accreditation that covers the performed tests in this report. In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification S.A.U. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification S.A.U. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification S.A.U. at the time of performance of the test. DEKRA Testing and Certification S.A.U. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Testing and Certification S.A.U. General conditions 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification S.A.U. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Testing and Certification S.A.U. and the Accreditation Bodies. Uncertainty Uncertainty (factor k=2) was calculated according to the DE…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 67871RRF.002A1 2022-03-04 Appendix B: Photographs DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 67871RRF.002A1 Page 2 of 4 2022-03-04 EQUIPMENT VIEW FOR MEASUREMENTS DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 67871RRF.002A1 Page 3 of 4 2022-03-04 TEST SETUP FOR RADIATED MEASUREMENTS DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 67871RRF.002A1 Page 4 of 4 2022-03-04