2AVTH-HT15CA10S01Hyundai Notebook

User Manual FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specific Absorption Rate (SAR) information: This Hyundai Technology Group, Inc. meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Hyundai Technology Group, Inc. has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the Notebook kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0mm separation distance between the user's body and the back of the Notebook. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Hyundai Technology Group, Inc. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 11/15/2023 U.S. Agent Designation Hyundai Technology Group, Inc. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AVTH-HT15CA10S01): Name and company of U.S. agent: Hyundai Technology Group, Inc. Physical U.S. address of agent: 2601 Walnut Ave. Tustin, CA, USA FRN of U.S. agent: 0029284114 Email address of U.S. agent: [email protected] Hyundai Technology Group, Inc. acknowledges their obligation to accept service of process on behalf of Hyundai Technology Group, Inc.. Hyundai Technology Group, Inc. with the FRN 0029284114 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Sophia Wong procurement manager Hyundai Technology Group, Inc. Signature Sophia Wong procurement manager Hyundai Technology Group, Inc. 48_[mo del] US_Agent_2.911(d)(7 ) - U, V05

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Hyundai Technology Group, Inc. Address: 2601 Walnut Ave. Tustin California 92780, United States Phone: +1-949-679-7960 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-11-14 Name / Title: Sophia Wong / Procurement Manager Company: Hyundai Technology Group, Inc. Address: 2601 Walnut Ave. Tustin California 92780, United States Phone: +1-949-679-7960 Fax: +1-714-409-3091 E-Mail: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2AVTH-HT15CA10S01 HT15CA10S01, HyBook Pro For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-11-14 Name / Title: Sophia Wong / Procurement Manager Company: Hyundai Technology Group, Inc. Address: 2601 Walnut Ave. Tustin California 92780, United States Phone: +1-949-679-7960 Fax: +1-714-409-3091 E-Mail: [email protected]

Hyundai Technology Group, Inc. 2601 Walnut Ave. Tustin California 92780, United States Date: November 14, 2023 FCC ID: 2AVTH-HT15CA10S01 Model Number: HT15CA10S01, HyBook Pro To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Hyundai Technology Group, Inc. hereby declare that our product (Hyundai Notebook) Model Number: HT15CA10S01, HyBook Pro board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name/Title: Sophia Wong / Procurement Manager Company: Hyundai Technology Group, Inc. Address: 2601 Walnut Ave. Tustin California 92780, United States Tel: +1-949-679-7960 Fax: +1-714-409-3091 E-Mail: [email protected]

Page 1 of 5 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 5 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 5 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 5 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8 Page 5 of 5 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 9

Page 1 of 1 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L 6.0cm x W 2.0cm) Label Location Hyundai Notebook Model: HT15CA10S01 FCC ID: 2AVTH-HT15CA10S01

Page 1 of 9 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 9 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 BT/WIFI Antenna0 Page 3 of 9 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 WIFI Antenna1 Page 4 of 9 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8 Page 5 of 9 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 9 Fig. 10 Page 6 of 9 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 11 Fig. 12 Page 7 of 9 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 13 Fig. 14 Page 8 of 9 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 15 Fig. 16 Page 9 of 9 FCC ID: 2AVTH-HT15CA10S01 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 17

Page 1 of 4 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix A Detailed System Check Results 1. System Performance Check System Performance Check 2450 MHz Head System Performance Check 5250 MHz Head System Performance Check 5800 MHz Head Date: 2023/9/15 Test Laboratory: LCS-SAR Lab System Performance Check 2450 MHz Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity DUT: D2450V2; Type: D2450V2; Serial: 965 Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.855 S/m; ε r = 38.744; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: Probe: EX3DV4 - SN3805; ConvF(7.50, 7.50, 7.50); Calibrated: 2023/6/21; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE3 Sn419; Calibrated: 2023/6/20 Phantom: SAM v5.0; Type: SAM; Serial: 1850 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Unnamed procedure/Area Scan (4x8x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 17.6 W/kg Configuration/Unnamed procedure/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 88.94 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 27.1 W/kg SAR(1 g) = 13 W/kg; SAR(10 g) = 5.97 W/kg Maximum value of SAR (measured) = 20.1 W/kg 0 dB = 17.6 W/kg = 12.47 dBW/kg Date: 2023/9/18 Test Laboratory: LCS-SAR Lab System Performance Check 5250 MHz DUT: D5GHzV2; Type: D5GHzV2; Serial: 1165 Communication System: UID 0, CW (0); Frequency: 5250 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5250 MHz; σ = 4.721 S/m; ε r = 36.011; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Probe: EX3DV4 - SN3805; ConvF(5.45, 5.45, 5.45); Calibrated: 2023/6/21; Sensor-Surface: 2mm (Mechanical Surface Detection), Electronics: DAE3 Sn419; Calibrated: 2023/6/20 Phantom: SAM v5.0; Type: SAM; Serial: 1850 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Head/d=10mm, Pin=100mW, f=5250 MHz/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 17.6 W/kg Head/d=10mm, Pin=100mW, f=5250 MHz/Zoom Scan (4x4x1.4mm, graded), dist=1.4mm (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 50.65 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 29.3 W/kg SAR(1 g) = 7.75 W/kg; SAR(10 g) = 2.27 W/kg Maximum value of SAR (measured) = 19.6 W/kg 0 dB = 17.6 W/kg = 12.45 dBW/kg Date: 2023/9/19 Test Laboratory: LCS-SAR Lab System Performance Check 5800 MHz DUT: D5GHzV2; Type: D5GHzV2; Serial: 1046 Communication System: UID 0, CW (0); Frequency: 5800 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5800 MHz; σ = 5.328 S/m; ε r = 34.496; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Probe: EX3DV4 - SN3805; ConvF(4.96, 4.96, 4.96); Calibrated: 2023/6/21; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE3 Sn419; Calibrated: 2023/6/20 Phantom: SAM v5.0; Type: SAM; Serial: 1850 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Unnamed procedure/Area Scan (5x5x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 21.7 W/kg Configuration/Unnamed procedure/Zoom Scan (7x7x17)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 70.00 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 38.9 W/kg SAR(1 g) = 8.44 W/kg; SAR(10 g) = 2.32 W/kg Maximum value of SAR (measured) = 22.5 W/kg 0 dB = 21.7 W/kg = 13.37 dBW/kg

Page 1 of 7 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix B Detailed Test Results 1. WIFI WIFI 2.4GHz for Body WIFI 5.2GHz for Body WIFI 5.8GHz for Body Date: 2023/9/15 Test Laboratory: LCS-SAR Lab Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity WIFI 2.4G 802.11n 11CH Rear side 0mm Ant0 DUT: Hyundai Notebook; Type: HT15CA10S01; Serial: NA Communication System: UID 0, WI-FI(2.4GHz) (0); Frequency: 2462 MHz;Duty Cycle: 1:1.043 Medium parameters used: f = 2462 MHz; σ = 1.874 S/m; ε r = 38.706; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: Probe: EX3DV4 - SN3805; ConvF(7.50, 7.50, 7.50); Calibrated: 2023/6/21; Sensor-Surface: 2mm (Mechanical Surface Detection), Electronics: DAE3 Sn419; Calibrated: 2023/6/20 Phantom: SAM v5.0; Type: SAM; Serial: 1850 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (10x11x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.449 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.816 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.756 W/kg SAR(1 g) = 0.277 W/kg; SAR(10 g) = 0.122 W/kg Maximum value of SAR (measured) = 0.469 W/kg 0 dB = 0.449 W/kg = -3.48 dBW/kg Date: 2023/9/15 Test Laboratory: LCS-SAR Lab Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity WIFI 2.4G 802.11b 6CH Rear side 0mm Ant1 DUT: Hyundai Notebook; Type: HT15CA10S01; Serial: NA Communication System: UID 0, WI-FI(2.4GHz) (0); Frequency: 2437 MHz;Duty Cycle: 1:1.053 Medium parameters used: f = 2437 MHz; σ = 1.839 S/m; ε r = 38.791; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: Probe: EX3DV4 - SN3805; ConvF(7.50, 7.50, 7.50); Calibrated: 2023/6/21; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE3 Sn419; Calibrated: 2023/6/20 Phantom: SAM v5.0; Type: SAM; Serial: 1850 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (10x11x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.437 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.800 V/m; Power Drift = 0.20 dB Peak SAR (extrapolated) = 0.736 W/kg SAR(1 g) = 0.269 W/kg; SAR(10 g) = 0.118 W/kg Maximum value of SAR (measured) = 0.456 W/kg 0 dB = 0.437 W/kg = -3.59 dBW/kg Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Date: 2023/9/18 Test Laboratory: LCS-SAR Lab Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity WIFI 5.2G 802.11n 40M 46CH Rear side 0mm Ant0 DUT: Hyundai Notebook; Type: HT15CA10S01; Serial: NA Communication System: UID 0, WI-FI(5.2GHz) (0); Frequency: 5230 MHz;Duty Cycle: 1:1.179 Medium parameters used: f = 5230 MHz; σ = 4.697 S/m; ε r = 35.961; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: Probe: EX3DV4 - SN3805; ConvF(5.45, 5.45, 5.45); Calibrated: 2023/6/21; Sensor-Surface: 2mm (Mechanical Surface Detection), Electronics: DAE3 Sn419; Calibrated: 2023/6/20 Phantom: SAM v5.0; Type: SAM; Serial: 1850 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (10x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.145 W/kg Configuration/Body/Zoom Scan (9x9x21)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 3.818 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 0.172 W/kg SAR(1 g) = 0.110 W/kg; SAR(10 g) = 0.068 W/kg Maximum value of SAR (measured) = 0.149 W/kg 0 dB = 0.145 W/kg = -8.37 dBW/kg Date: 2023/9/18 Test Laboratory: LCS-SAR Lab Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity WIFI 5.2G 802.11ac 80M 42CH Rear side 0mm Ant1 DUT: Hyundai Notebook; Type: HT15CA10S01; Serial: NA Communication System: UID 0, WI-FI(5.2GHz) (0); Frequency: 5210 MHz;Duty Cycle: 1:1.052 Medium parameters used: f = 5210 MHz; σ = 4.686 S/m; ε r = 36.076; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: Probe: EX3DV4 - SN3805; ConvF(5.45, 5.45, 5.45); Calibrated: 2023/6/21; Sensor-Surface: 2mm (Mechanical Surface Detection), Electronics: DAE3 Sn419; Calibrated: 2023/6/20 Phantom: SAM v5.0; Type: SAM; Serial: 1850 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (10x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.144 W/kg Configuration/Body/Zoom Scan (9x9x21)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 3.805 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.171 W/kg SAR(1 g) = 0.133 W/kg; SAR(10 g) = 0.087 W/kg Maximum…

Text truncated - open the document above for the full version.

Page 1 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix C Calibration certificate 1. Dipole D2450V2-SN 965(2023-06-12) D5GHzV2-SN 1046(2023-06-20) 2. DAE DAE3-SN 419(2023-06-20) 3. Probe EX3DV4-SN 3805(2023-06-21) Page 2 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 3 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 4 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 5 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 6 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 7 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 8 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 9 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 10 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 11 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 12 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 13 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 14 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 15 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity

Page 16 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 17 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 18 of 27 FCCID: 2AVTH-HT15CA10S01 Report No.: LCSA08023169EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 19 …

Text truncated - open the document above for the full version.