2AVUP-SS00042433MHz wireless remote control

Remote control key operation instructions Remote control key operation instructionsRemote control key operation instructions Remote control key operation instructions （ （（ （Model No.:80085668 Model No.:80085668 Model No.:80085668 Model No.:80085668 ） ）） ） 1 Aim the remote control device at the generator 2 Press the start button, the red light will be on, the signal will be sent, and the engine will start. 3 If you need to stop, please press the stop button and the engine will stop working. 4 Press down and the red indicator lights up slightly, it is indicating that the battery is low and needs to be replaced. 5 Matching CR2016 lithium - manganese dioxide button battery start button stop button Regulatory information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subjectto the following two conditions: (1) this device may not cause interference, and (2) this devicemust accept any interference, including interference that may cause undesired operation of thedevice. Le présentappareilestconforme aux CNR d'IndustrieCanadaapplicables aux appareilsradioexempts de licence. L'exploitationestautorisée aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. ce matériel estconforme aux limites de dose d'exposition aux rayonnements, FCC / CNR- 102 énoncée dans un autreenvironnement.

Chongqing Lihua Automatic Technology Co.,Ltd Date: 2020-4-23 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID ：2AVUP-SS00042 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with << Chongqing Lihua Automatic Technology Co.,Ltd >>. This authorization is valid until further written notice from the applicant. Name (Printed):Yong Yang Title:PM Signature: On behalf of Company: Chongqing Lihua Automatic Technology Co.,Ltd Telephone: 02363416900

Chongqing Lihua Automatic Technology Co.,Ltd Date:2020-4-23 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Chongqing Lihua Automatic Technology Co.,Ltd No.9 Yangliubei Road, Yubei District, Chongqing, China, 400000 Regarding: Confidentiality Request regarding application for FCC ID:2AVUP-SS00042 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name:Yong Yang Title:PM Company Name: Chongqing Lihua Automatic Technology Co.,Ltd

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 2 Page 1 of 2 External Photos Applicant: Chongqing Lihua Automatic Technology Co.,Ltd Address of Applicant: No.9 Yangliubei Road, Yubei District, Chongqing, China Equipment Under Test (EUT): Product Name: 433MHz wireless remote control Model No.: 80085668 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 2 Page 2 of 2 End

Label Location: Remark：The product is small to place the FCC statement on the product and it be placed in the user manual which the device is marketed. Label Location

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 4 Page 1 of 4 Internal Photos Applicant: Chongqing Lihua Automatic Technology Co.,Ltd Address of Applicant: No.9 Yangliubei Road, Yubei District, Chongqing, China Equipment Under Test (EUT): Product Name: 433MHz wireless remote control Model No.: 80085668 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 4 Page 2 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 4 Page 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 4 Page 4 of 4 E EE En nn nd dd d

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200200121801 Page: 1 of 24 Parlam Zhan E&E Section Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. TEST REPORT Application No.: SHEM2002001218CR FCC ID: 2AVUP-SS00042 IC: 25913-SS00042 Applicant: Chongqing Lihua Automatic Technology Co.,Ltd Address of Applicant: No.9 Yangliubei Road, Yubei District, Chongqing, China Manufacturer: Chongqing Lihua Automatic Technology Co.,Ltd Address of Manufacturer: No.9 Yangliubei Road, Yubei District, Chongqing, China Factory: Chongqing Lihua Automatic Technology Co.,Ltd Address of Factory: No.9 Yangliubei Road, Yubei District, Chongqing, China Equipment Under Test (EUT): EUT Name: 433MHz wireless remote control Model No.: 80085668 Standard(s) : 47 CFR Part 15, Subpart C 15.231 RSS-210 Issue 10 December 2019 RSS-Gen Issue 5, March 2019 Amendment 1 Date of Receipt: 2020-02-27 Date of Test: 2020-04-01 to 2020-04-11 Date of Issue: 2020-04-16 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200200121801 Page: 2 of 24 Revision Record Version Description Date Remark 00 Original 2020-04-16 / Authorized for issue by: Bill Wu / Project Engineer Parlam Zhan /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200200121801 Page: 3 of 24 2 Test Summary Radio Spectrum Technical Requirement Item FCC Requirement IC Requirement Method Result Antenna Requirement 47 CFR Part 15, Subpart C 15.203 RSS-Gen Section 8.1.3 N/A Pass N/A: Not applicable Radio Spectrum Matter Part Item Requirement IC Requirement Method Result 20dB Bandwidth 47 CFR Part 15, Subpart C 15.231 RSS-210 A1.3 ANSI C63.10 (2013) Section 6.9 Pass Dwell Time 47 CFR Part 15, Subpart C 15.231(a) RSS-210 A1.1 ANSI C63.10 (2013) Section 7.8.4 Pass Field Strength of the Fundamental Signal 47 CFR Part 15, Subpart C 15.231(b) RSS-210 A1.2 ANSI C63.10 (2013) Section 6.5 Pass Radiated Emissions 47 CFR Part 15, Subpart C 15.231 RSS-210 A1.2 ANSI C63.10 (2013) Section 6.4&6.5&6.6 Pass 99% Bandwidth N/A RSS-210 A1.3 RSS-Gen Section 6.7 Pass Frequency Stability RSS-Gen March 2019 RSS-Gen Section 6.11 RSS-Gen Section 8.11 Note 1 Note: Frequency stability requested in RSS GEN S8.11 has been complied since the result of occupied bandwidth can demonstrate. SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Report No.: SHEM200200121801 Page: 4 of 24 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 TEST SUMMARY .................................................................................................................................. 3 3 CONTENTS ........................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................... 5 4.1 DETAILS OF E.U.T. .......................................................................................................................... 5 4.2 DESCRIPTION OF SUPPORT UNITS ..................................................................................................... 5 4.3 MEASUREMENT UNCERTAINTY........................................................................................................... 5 4.4 TEST LOCATION ............................................................................................................................... 6 4.5 TEST FACILITY ................................................................................................................................. 6 4.6 DEVIATION FROM STANDARDS ........................................................................................................... 6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS................................................................................... 6 5 EQUIPMENT LIST ................................................................................................................................. 7 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 8 6.1 ANTENNA REQUIREMENT .................................................................................................................. 8 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................... 9 7.1 20DB BANDW IDTH ........................................................................................................................... 9 7.2 DW ELL TIME ...................................................................................................................................11 7.3 FIELD STRENGTH OF THE FUNDAMENTAL SIGNAL (15.231(B)) ..............................................................13 7.4 RADIATED EMISSIONS .....................................................................................................................15 7.5 99% BANDW IDTH ............................................................................................................................22 8 TEST SETUP PHOTOGRAPHS ...............................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 1 of 4 Page 1 of 4 Test Setup Photos-FCC Applicant: Chongqing Lihua Automatic Technology Co.,Ltd Address of Applicant: No.9 Yangliubei Road, Yubei District, Chongqing, China Equipment Under Test (EUT): Product Name: 433MHz wireless remote control Model No.: 80085668 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 2 of 4 Page 2 of 4 1 Contents Page 1 CONTENTS .......................................................................................................... 2 2 EQUIPMENT UNDER TEST PICTURES ......................................................... 3 2.1 Radiated Emission Test Setup ............................................................. 3 SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 3 of 4 Page 3 of 4 2 EQUIPMENT UNDER TEST PICTURES 2.1 Radiated Emission Test Setup 30MHz to 1GHz Above 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shanghai Branch Page: 4 of 4 Page 4 of 4 Zoom: End