2AVV2C100CLTPlayer

C1 PLAYER www.colorlightinside.com 2 CONTENT Chapter 1 Interface and Hardware Connection ........................................................................................................................................................ 1 1.1 Interfaces ..................................................................................................................................................................................................... 3 1.2 Hardware Connection .................................................................................................................................................................................. 3 Chapter 2 Install LEDVISION ................................................................................................................................................................................... 4 Chapter 3 Settings .................................................................................................................................................................................................... 5 3.1 Connect C1 with USB Cable ....................................................................................................................................................................... 5 3.2 Basic Settings .............................................................................................................................................................................................. 7 3.2.1 Basic Parameter Settings ................................................................................................................................................................. 7 3.2.2 Program Management ...................................................................................................................................................................... 8 3.2.3 Schedule ........................................................................................................................................................................................... 9 3.3 Advanced Settings .................................................................................................................................................................................... 10 3.3.1 Playing Parameters ......................................................................................................................................................................... 10 3.3.2 Network ............................................................................................................................................................................................ 11 Chapter 4 Program Editing and Publishing ............................................................................................................................................................ 15 4.1 Program Editing ......................................................................................................................................................................................... 15 4.2 Program Publishing ................................................................................................................................................................................... 16 4.2.1 Publish Program through USB Cable or LAN ................................................................................................................................. 16 4.2.3 Publish Program with a USB Disk .................................................................................................................................................. 18 Chapter 5 Network Management of C1 .................................................................................................................................................................. 21 5.1 Connection and Management ................................................................................................................................................................... 21 5.2 Add Group and C1 ..................................................................................................................................................................................... 22 Chapter 6 M2 Monitoring Card ............................................................................................................................................................................... 23 6.1 M2 Interface ............................................................................................................................................................................................... 23 6.2 M2 Management........................................................................................................................................................................................ 24 6.3 M2 Management Interface ........................................................................................................................................................................ 25 www.colorlightinside.com 1 Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferen…

Text truncated - open the document above for the full version.

Company Name: Colorlight (Shenzhen) Cloud Technology Co., Ltd. Add: Room 101, IC Industrial Park, No.1089 Chaguang Road, Xili Street, Nanshan District, Shenzhen City, China. Tel:0755- 86141372 Fax: 0755-86009659 Attestation Letter Date: 2020/06/18 To: Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 Dear Sir or Madam: The RF chip, model AP6330, installed in our product: Player; Model name: C1, and W ifi bands:2412 -2462MHz , 5150MHz~5250MHz, 5250 MHz~5350MHz, 5470MHz~5725MHz, 5724MHz~5850MHz, For the purpose of marketing, the product will only and 5150MHz~5250MHz, the BT and other W ifi bands have been shielded by the software, and the end user can not ha ve the capability to activate the frequency bands. Sincerely, Signature: Contact person: Hathaway Peng Tittle: Certification Specialist supports BT/BLE supports 2412-2462 MHz manufacturer using FCC ID: 2AVV V 2C100CLT

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200312810-00A FCC Part 15.247 Page 12 of 48 FCC §15.247 (i) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard According to subpart 15.247 (i) and subpart 2.1091 systems operating under the provisions of this section shall be operated in a manner that ensures the public is not exposed to RF energy level in excess of the communication guidelines. Limits for General Population/Uncontrolled Exposure Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (Minutes) 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Result Calculated Formulary: Predication of MPE limit at a given distance S = 2 4R PG  S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW). G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain. R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) Frequency (MHz) Antenna Gain Max Tune Up Conducted Power Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) (dBi) (numeric) (dBm) (mW) 2412-2462 4.5 2.82 20.5 112.2 20 0.063 1.0 Note: (1) To maintain compliance with the FCC’s RF exposure guidelines, place the equipment at least 20cm from nearby persons. (2) The equipment is not a simultaneous transmit system. Result: compliance.

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.247 TEST REPORT For Colorlight (Shenzhen) Cloud Technology Co., Ltd. Room 101,IC Industrial Park,No.1089 Chaguang Road,Xili Street,Nanshan Distirct,Shenzhen,China FCC ID:2AVV2C100CLT Report Type: Original Report Product Type: Player Re port Number: RSZ200312810-00A Re port Date: 2020-05-18 Reviewed B y: Nancy Wang RF Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200312810-00A FCC Part 15.247 Page 2 of 48 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 DUTY CYCLE ................................................................................................................................................................ 7 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 8 EXTERNAL I/O CABLE .................................................................................................................................................. 9 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 9 SUMMARY OF TEST RESULTS ............................................................................................................................. 10 TEST EQUIPMENT LIST ......................................................................................................................................... 11 FCC §15.247 (i) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ........................................................ 12 APPLICABLE STANDARD ............................................................................................................................................ 12 RESULT ...................................................................................................................................................................... 12 FCC §15.203 - ANTENNA REQUIREMENT ........................................................................................................... 13 APPLICABLE STANDARD ............................................................................................................................................ 13 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 13 FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS ..................................................................................... 14 APPLICABLE STANDARD ............................................................................................................................................ 14 EUT SETUP ................................................................................................................................................................ 14 EMI TEST RECEIVER SETUP ....................................................................................................................................... 14 TEST PROCEDURE ...................................................................................................................................................... 14 CORRECTED FACTOR & MARGIN CALCULATION .......................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions - Front View Conducted Emissions - Side View Radiated Emissions View (Below 1 GHz) Radiated Emissions View (Above 1 GHz) ***** END OF REPORT *****