2AVYF-IPC-D3XMICONSUMER CAMERA

Legal and Regulatory Information Legal Considerations This product can be regulated by laws that vary from country to country. Check the laws in your local region before using it. Disclaimer Every care has been taken in the preparation of this document. Please contact us through the following contact information of any inaccuracies or omissions. Imou shall not be held responsible for any technical or typographical errors and reserve s the right to make changes to the product and manuals without prior notice. Imou makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Imou shall not be liable or responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose. Intellectual Property Rights Imou retains all intellectual property rights relating to technology embodied in the product described in this document. Equipment Modifications This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals. Trademark Acknowledgments is the registered trademark or trademark application of Imou in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. Regulatory Information European Directives Compliance This product complies with the applicable CE marking directives and standards: Low Voltage (LVD) Directive 2014/35/EU. Electromagnetic Compatibility (EMC) Directive 2014/30/EU. Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU and its amending Directive (EU) 2015/863. A copy of the original declaration of conformity may be obtained from Imou. The most up to date copy of the signed EU Declaration of Conformity (DoC) can be downloaded from: https://en.imoulife.com/support/downloadCenter/eudoc. CE-Electromagnetic Compatibility (EMC) This digital equipment is compliant with Class B according to EN 55032. CE-Safety This product complies with IEC/EN/UL 62368-1, Audio/video, information and communication technology equipment – Part 1: Safety requirements and IEC/UL 60950-1: Safety of Information Technology Equipment. Declaration of Conformity CE (Only for the product has RF function) Hereby, Imou declares that the radio equipment is compliant with Radio Equipment Directive (RED) 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://en.imoulife.com/support/downloadCenter/eudoc. Questo prodotto è conforme alle direttive e agli standard di marcatura CE applicabili: Bassa tensione (LVD) Direttiva 2014/35/UE. Compatibilità el ettromagnetica (EMC) Direttiva 2014/30UE. Restrizione sulle sostanze pericolose (RoHS) Direttiva 2011/65/UE e Direttiva delegata (UE) 2015/863. È possibile ottenere una copia della dichiarazione originale di conformità da Imou. La copia aggiornata della Dichiarazione di conformità UE firmata può essere scaricata da: https://en.imoulife.com/support/downloadCenter/eudoc. CE-Compatibilità elettromagnetica (EMC) Questa apparecchiatura digitale è conforme alla Classe B della certificazione EN 55032. CE-Sicurezza Questo prodotto è conforme alle disposizioni IEC/EN/UL 62368-1 o IEC/UL 60950-1 sulla sicurezza delle apparecchiature informatiche. Dichiarazione di conformità CE (Solo per prodotti con trasmettitori / ricevitori RF) Con la presente, Imou dichiara che l'apparecchiatura radio è conforme alla Direttiva sulle apparecchiature radio (RED) 2014/53/UE. Il testo integrale della Dichiarazione di conformit à UE è disponibile al seguente indirizzo internet: https://en.imoulife.com/support/downloadCenter/eudoc. Declaration of Conformity UKCA This device complies with UKCA relevant directives and standards. Electrical Equipment (Safety) Regulations 2016 . Electromagnetic Compatibility Regulations 2016. The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. UK Declaration of Conformity (DoC) can be downloaded from: https://en.imoulife.com/support/downloadCenter/ukdoc. Hereby, Imou declares that the radio equipment is compliant with Radio Equipment Regulations 2017. USA Regulatory Compliance FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonabl e protection against harmful interference in a residential installation. This product generates, uses, and can radiate ra dio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. …

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Huacheng Network Technology Co.,Ltd. Address 13th Floor, Building 3, No. 1399, Binxing Road, Changhe Street, Binjiang District, Hangzhou, China (Zhejiang) Pilot Free Trade Zone Grantee Code 2AVYF FCC ID 2AVYF-IPC-D3XMI Authorized Contact Name Zhang chenhao Contact Email [email protected] Contact Phone +86 18106514083 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2022/11/08 Print Name: Zhang chenhao Title: Product Certification Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Hangzhou Huacheng Network Technology Co., Ltd.. Current Date : 2022-11-08 To: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products *WE (Hangzhou Huacheng Network Technology Co., Ltd.) HEREBY DECLARED THAT Product Description CONSUMER CAMERA Model No. IPC-D32MIP-0280B-imou;IPC-D32MIN-0280B-imou; IPC-D32MIP-0280B;IPC-D32MIN-0280B;IPC-D32MIP-0360B-imou; IPC-D32MIN-0360B-imou;IPC-D32MIP-0360B;IPC-D32MIN-0360B; IPC-D32MIN Manufacturer’s Name Hangzhou Huacheng Network Technology Co., Ltd. Manufacturer’s Address 13th Floor, Building 3, No. 1399, Binxing Road, Changhe Street, Binjiang Dis trict, Hangzhou, China (Zhejiang) Pilot Free Trade Zone *Except that the model number, trade name,Color and appearance deviation, are identical with the original product as follows: Note: The definition of identical should be “electrically identical”. A device will be considered to be electrically identical if no changes are made to the devices’ schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. Model No. (型号): IPC-D32MIP Manufacturer’s Name (生产商名称): Hangzhou Huacheng Network Technology Co., Ltd. Manufacturer’s Address（生产商商地址): 13th Floor, Building 3, No. 1399, Binxing Road, Changhe Street, Binjiang District, Hangzhou, China (Zhejiang) Pilot Free Trade Zone Sincerely, Signature (签字): Printed Name (姓名): Zhang chenhao Position/Title (职位): Product Certification Engineer Hangzhou Huacheng Network Technology Co., Ltd.. Contact Number (联系电话): +86 18106514083

Hangzhou Huacheng Network Technology Co.,Ltd. Date: 2022-11-08 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AVYF-IPC-D3XMI To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Huacheng Network Technology Co.,Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Zhang chenhao Title: Product Certification Engineer Signature: On behalf of Company: Hangzhou Huacheng Network Technology Co.,Ltd. Telephone: +86 18106514083

Hangzhou Huacheng Network Technology Co.,Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Huacheng Network Technology Co.,Ltd. 13th Floor, Building 3, No. 1399, Binxing Road, Changhe Street, Binjiang District, Hangzhou, China (Zhejiang) Pilot Free Trade Zone Regarding: Confidentiality Request regarding application for FCC ID: 2AVYF-IPC-D3XMI LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Zhang chenhao Product Certification Engineer Hangzhou Huacheng Network Technology Co.,Ltd.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 7 Appendix Photographs of External Photos for KSCR2209001725AT Test Model No.: IPC-D32MIP Compliance Certification Services (Kunshan) Inc. Page: 2 of 7 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 7 Compliance Certification Services (Kunshan) Inc. Page: 4 of 7 Compliance Certification Services (Kunshan) Inc. Page: 5 of 7 Compliance Certification Services (Kunshan) Inc. Page: 6 of 7 Compliance Certification Services (Kunshan) Inc. Page: 7 of 7

Compliance Certification Services (Kunshan) Inc. Page: 1 of 8 Appendix Photographs of Internal Photos for KSCR2209001725AT Test Model No.: IPC-D32MIP Compliance Certification Services (Kunshan) Inc. Page: 2 of 8 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 8 Compliance Certification Services (Kunshan) Inc. Page: 4 of 8 Compliance Certification Services (Kunshan) Inc. Page: 5 of 8 Compliance Certification Services (Kunshan) Inc. Page: 6 of 8 Compliance Certification Services (Kunshan) Inc. Page: 7 of 8 Compliance Certification Services (Kunshan) Inc. Page: 8 of 8

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172503 Page: 1 of 12 Eric Lin Laboratory Manager 1 Cover Page RF Exposure Evaluation Report Application No.: KSCR2209001725AT FCC ID: 2AVYF-IPC-D3XMI Applicant: Hangzhou Huacheng Network Technology Co.,Ltd. Address of Applicant: 13th Floor, Building 3, 1399 Binxing Road, Changhe Street, Binjiang District, Hangzhou, China (Zhejiang) Pilot Free Trade Zone Manufacturer: Hangzhou Huacheng Network Technology Co.,Ltd. Address of Manufacturer: 13th Floor, Building 3, 1399 Binxing Road, Changhe Street, Binjiang District, Hangzhou, China (Zhejiang) Pilot Free Trade Zone Equipment Under Test (EUT): EUT Name: CONSUMER CAMERA Model No.: IPC-D32MIP Add Model No.: IPC-D32MIP-0280B-imou;IPC-D32MIN-0280B-imou; IPC-D32MIP-0280B;IPC-D32MIN-0280B;IPC-D32MIP-0360B-imou; IPC-D32MIN-0360B-imou;IPC-D32MIP-0360B;IPC-D32MIN-0360B; IPC-D32MIN Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2022-09-13 Date of Test: 2022-09-30 to 2022-10-09 Date of Issue: 2022-10-11 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172503 Page: 2 of 12 Revision Record Version Chapter Date Modifier Remark 01 2022-10-11 Original Authorized for issue by: Eric Lin /Project Engineer Eric Lin /Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172503 Page: 3 of 12 2 Contents Page 1 COVER PAGE .................................................................................................................................... 1 2 CONTENTS ........................................................................................................................................ 3 3 GENERAL INFORMATION ................................................................................................................ 4 3.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................ 4 3.2 DETAILS OF E.U.T. ....................................................................................................................... 4 3.3 TEST LOCATION ............................................................................................................................ 5 3.4 TEST FACILITY .............................................................................................................................. 6 4 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .......................................................... 7 4.1 BLANKET 1 MW BLANKET EXEMPTION ........................................................................................... 7 4.2 MPE-BASED EXEMPTION .............................................................................................................. 7 4.3 SAR-BASED EXEMPTION ............................................................................................................... 8 5 MEASUREMENT AND CALCULATION .......................................................................................... 11 5.1 MAXIMUM TRANSMIT POWER ....................................................................................................... 11 5.2 RF EXPOSURE CALCULATION ...................................................................................................... 12 Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172503 Page: 4 of 12 3 General Information 3.1 General Description of E.U.T. Power supply: DC 12V,1A 3.2 Details of E.U.T. 2.4G Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK);802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20):11 Channel Spacing: 5MHz Antenna Type: Dipole Antenna Antenna Gain: 4.01dBi (Provided by the manufacturer) BLE Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 LE Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: Dipole Antenna Antenna Gain: 4.01dBi (Provided by the manufacturer) Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172503 Page: 5 of 12 3.3 Test Location Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888 Fax: +86 512 5737 0818 No tests were sub-contracted. Note: 1.SGS is not responsible for wrong test results due to incorrect information (e.g. max. clock frequency, highest internal frequency, antenna gain, cable loss, etc ) is provided by the applicant. (if applicable). 2.SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (if applicable) Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172503 Page: 6 of 12 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS CNAS has accredited Compliance Certification Services (Kunshan) Inc. to ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA Compliance Certification Services (Kunshan) Inc. is accredited by the American Association for Laboratory Accreditation (A2LA) • FCC Compliance Certification Services (Kunshan) Inc. has been recognized as an accredited testing laboratory. • ISED Compliance Certification Services (Kunshan) Inc. has been recognized by Innovation, Science and Economic Development Canada (ISED) as an accredited testing laboratory. Company Number: 2324E • VCCI The 3m and 10m Semi-anechoic chamber and Shielded Room of Compliance Certification Services (Kunshan) Inc. has been registered in accordance with the Regulations for Vo…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172502 Page: 1 of 111 Eric Lin Laboratory Manager TEST REPORT Application No.: KSCR2209001725AT FCC ID: 2AVYF-IPC-D3XMI Applicant: Hangzhou Huacheng Network Technology Co.,Ltd. Address of Applicant: 13th Floor, Building 3, 1399 Binxing Road, Changhe Street, Binjiang District, Hangzhou, China (Zhejiang) Pilot Free Trade Zone Manufacturer: Hangzhou Huacheng Network Technology Co.,Ltd. Address of Manufacturer: 13th Floor, Building 3, 1399 Binxing Road, Changhe Street, Binjiang District, Hangzhou, China (Zhejiang) Pilot Free Trade Zone Equipment Under Test (EUT): EUT Name: CONSUMER CAMERA Model No.: IPC-D32MIP;IPC-D32MIP-0280B-imou;IPC-D32MIN-0280B-imou; IPC-D32MIP-0280B;IPC-D32MIN-0280B;IPC-D32MIP-0360B-imou; IPC-D32MIN-0360B-imou;IPC-D32MIP-0360B;IPC-D32MIN-0360B; IPC-D32MIN   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-09-13 Date of Test: 2022-09-30 to 2022-10-09 Date of Issue: 2022-10-11 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172502 Page: 2 of 111 Revision Record Version Description Date Remark 00 Original 2022-10-11 / Authorized for issue by: Eric Liu/Project Engineer Eric Lin /Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172502 Page: 3 of 111 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Declaration of EUT Family Grouping: There are series models mentioned in this report and they are the Identical in electrical and electronic characters.Only the model IPC-D32MIP was tested since their differences were the model number, trade name,Color and appearance. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172502 Page: 4 of 111 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 POWER LEVEL SETTING USING IN TEST ................................................................................................... 6 4.3 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.4 MEASUREMENT UNCERTAINTY .............................................................................................................. 7 4.5 TEST LOCATION .................................................................................................................................... 8 4.6 TEST FACILITY ...................................................................................................................................... 8 4.7 DEVIATION FROM STANDARDS ............................................................................................................... 8 4.8 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 8 5 EQUIPMENT LIST ...................................................................................................................................... 9 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 10 6.1 ANTENNA REQUIREMENT .................................................................................................................... 10 6.1.1 Test Requirement: ....................................................................................................................... 10 6.1.2 Conclusion ................................................................................................................................... 10 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 11 7.1 CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) ........................................................... 11 7.1.1 E.U.T. Opera…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172501 Page: 1 of 64 Eric Lin Laboratory Manager TEST REPORT Application No.: KSCR2209001725AT FCC ID: 2AVYF-IPC-D3XMI Applicant: Hangzhou Huacheng Network Technology Co.,Ltd. Address of Applicant: 13th Floor, Building 3, 1399 Binxing Road, Changhe Street, Binjiang District, Hangzhou, China (Zhejiang) Pilot Free Trade Zone Manufacturer: Hangzhou Huacheng Network Technology Co.,Ltd. Address of Manufacturer: 13th Floor, Building 3, 1399 Binxing Road, Changhe Street, Binjiang District, Hangzhou, China (Zhejiang) Pilot Free Trade Zone Equipment Under Test (EUT): EUT Name: CONSUMER CAMERA Model No.: IPC-D32MIP;IPC-D32MIP-0280B-imou;IPC-D32MIN-0280B-imou; IPC-D32MIP-0280B;IPC-D32MIN-0280B;IPC-D32MIP-0360B-imou; IPC-D32MIN-0360B-imou;IPC-D32MIP-0360B;IPC-D32MIN-0360B; IPC-D32MIN   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-09-13 Date of Test: 2022-09-30 to 2022-10-09 Date of Issue: 2022-10-11 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172501 Page: 2 of 64 Revision Record Version Description Date Remark 00 Original 2022-10-11 / Authorized for issue by: Eric Liu/Project Engineer Eric Lin /Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172501 Page: 3 of 64 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Declaration of EUT Family Grouping: There are series models mentioned in this report and they are the Identical in electrical and electronic characters.Only the model IPC-D32MIP was tested since their differences were the model number, trade name,Color and appearance. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220900172501 Page: 4 of 64 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ..…

Text truncated - open the document above for the full version.