2AW26TR-WIFISEN-XHex Sense

Welcome to the Hex family. A simpler, smarter way to protect your home. SAFETY NOTICES • Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F). • Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating. • DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. • DO NOT place or drop objects on top and do not shove any foreign objects into the product. • DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the product during electrical storms. • DO NOT cover the vents on the product to prevent the system from getting overheated. • DO NOT use damaged power cords, accessories, or other peripherals. • If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference bone or more of the following measures: • Reorient or relocate the device(s). • Increase the separation between the device(s). • Connect the equipment into an outlet on a circuit different from that to which the receiver connected. • Check the troubleshooting section for additional help. WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Brand Name: Origin Wireless Taiwan Corporation M odel Name: Hex Sense FCC ID: 2AW26TR-WIFISEN-X PROHIBITION OF CO-LOCATION This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING! This device must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. PRIVACY & TERMS B efore using the Hex Home system, please read all applicable terms rule, policies and usage provisions found in the Hex Home app in Privacy & Terms > Privacy Policy, or > Terms of Use, and available at Privacy Policy: myhexhome.com/policies/privacy-policy Terms of Service: myhexhome.com/policies/terms-of-service (collectively, the “Agreements”) By using your Hex Home system, you agree to be bound by the Agreements. LIMITED WARRANTY Your Hex Home System is covered by a Limited Warranty, detailed in the Hex Home app in Privacy & Terms > Legal, and at myhexhome.com/policies/refund-policy RECYCLING YOUR DEVICE PROPERLY The disposal of certain electronic devices in regulated in some areas. Make sure you dispose of or recycle your device in accordance with your local laws and r egulations. OPERATING INSTRUCTIONS & TROUBLESHOOTING For helps & tips, instructions, and FAQs, please visit myhexhome.com/faq NEED MORE HELP? Please reach out to us at any of the following options: 1 -833-4MYHEX1 myhexhome.com/help hell [email protected] Copyright ©2020 by Origin Wire less, Inc. or its affiliates. All rights reserved. Hex, Hex Home, Hex Command, Hex Sense, all related logos and motion marks are trademarks of Origin Wireless, Inc. or its affiliates. Origin Wireless, Inc. 7500 Greenway Center Drive, Greenbelt, MD 20770 USA. SYSTEM & REQUIREMENTS Hex Home is for indoor use only; the system is at its best performance when the devices are on the same floor. GETTING TO KNOW YOUR HEX DEVICES Hex Sense PRODUCT SPECIFICATIONSLIGHT INDICATORS For detailed specs, please visit: myhexhome.com/faq White Blinking Updating Yellow Solid Motion detected light Red Solid Communication error Electrical Rating: 100V – 120V, 50/60Hz, 0.2A Wireless: 802.11 a/n 1x1 5GHz, BLE 4.2 Temperature Rating: 0 - 40 ॰ C Size: Ø55.7mm x 35.5mm Weight: 61g IMPORTANT TO KNOW: When plugging in your Hex Sense into the outlet, make sure it looks like this: Place the logo on the bottom of the device, towards the floor. Use the top outlet Light ring Siren Reset button

FCC IC NII Software Security Info Page 1 of 3 RF_736, Issue 3 Company Name: Origin Wireless Taiwan Corp. Address: 3F A1-1 No. 1, Lixing 1st. Rd., Easr Dist. City: Hsinchu Country: Taiwan To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Request for confidentiality Subject: Request for confidentiality FCC ID: 2AW26TR-WIFISEN-X Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Due to market confidential, we ask for the short-term confidentiality by listed. Planned Release Date STC: (notes 2, 3, 4, 5). If no date is given, 180 days from grant date will be used. Date: 2020/11/10 Name and signature of applicant: Yin Cheng Wang Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

FCC IC NII Software Security Info Page 1 of 3 RF_736, Issue 3 30-11-2015 Origin Wireless Taiwan Corp. Address: 3F A1-1 No. 1, Lixing 1st. Rd., Easr Dist. Hsinchu City 300, Taiwan Declaration of Authorization We Name: Origin Wireless Taiwan Corp. Address: 3F A1-1 No. 1, Lixing 1st. Rd., Easr Dist. City: Hsinchu Country: Taiwan Declare that: Name Representative of agent: Louis Hsu (1) Agent Company name: DEKRA Testing and Certification Co., Ltd. Address: No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, City: Hsinchu County, Country Taiwan is authorized to apply for Certification of the following product(s): Product description: Hex Sense Type designation: Hex Sense Trademark: Origin Wireless Taiwan Corporation on our behalf. Date: 2020/11/10 City: Hsinchu Name: Yin Cheng Wang (2) Function: Marketing Manager Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Report No：2090185R-E3032110108 Page: 61 of 71 Attachment 2  EUT External Photograph (1) EUT Photo (2) EUT Photo Report No：2090185R-E3032110108 Page: 62 of 71 (3) EUT Photo (4) EUT Photo Report No：2090185R-E3032110108 Page: 63 of 71 (5) EUT Photo (6) EUT Photo

1 Confidential Material for Internal Use Only DIMENSION LABEL

ANEW RELEASE SAM SUN WNC CONFIDENTIAL 4L.LVX50.001 A 2 AMANDA LAI AMANDA LAI SAM SUN 09/04/20 09/04/20 09/04/20 LABEL, PR, LVX5 DIELINE 1/1 1 OF 1 REEL DIRECTION ON LINE PRINT ( HARD COPY) 28.63 R4.61 R4.61 R18.72 R18.57 38.1 25.3 09/04/20 NOTES: 1. MATERIAL: WHITE PET, T=0.075 ADHESIVE: FINISH: PP,T=0.025 2. COLOR: A. B. 3. 4. 3±0.5MM,3.0±0.3MM 5. :PC 6. UL APPROVED,PGJI2, UL INDOOR XX THERMAL TRANSFER RIBBONS 7. TEMPERATURE RESISTANT= 80°C. 8.TEST REQUIREMENTS TEST ITEMTEST SPECTEST CONDITIONCRITERIA 1附著力測 試 ISO Class.: 1 ASTM Class.: 4 B ASTM D3359-02/ ISO 2409:2007 Detachment of small flakes of the coating at the intersections of the cuts. A cross-cut area not significantly greater than 5 % is affected. *1 *2 Font: Poppins, 4pt 9.4X9.4 Font: Poppins, 4pt Font: Poppins, 4pt Font: Poppins, 4pt Font: Poppins, 4pt Font: Poppins, 4pt Font: Poppins SemiBold, 5pt Font: Poppins SemiBold, 5pt Font: Poppins, 3.5pt Font: Poppins, 4pt Font: Poppins, 4pt Font: Poppins, 4pt Font: Poppins, 3.8pt Font: Poppins, 3.8pt 9.4X9.4 : : R 003-yyzzzz S/N: YM21WXXXXXXX Made in Vietnam Input: 100-120V~ 50/60Hz 0.2A FCC ID: 2AW26TR-WIFISEN-X FCC ID: 2AW26TR-WIFISEN-X Origin Wireless, Inc. MAC: XX:XX:XX:XX:XX:XX S/N: YM21WXXXXXXX Made in Vietnam Input: 100-120V~ 50/60Hz 0.2A Origin Wireless, Inc. MAC: XX:XX:XX:XX:XX:XX 5 mm MUST BE R 9.4 4.2 23.8 6.7

Report No：2090185R-E3032110108 Page: 64 of 71 Attachment 3  EUT Internal Photograph (1) EUT Photo (2) EUT Photo Report No：2090185R-E3032110108 Page: 65 of 71 (3) EUT Photo (4) EUT Photo Report No：2090185R-E3032110108 Page: 66 of 71 (5) EUT Photo (6) EUT Photo Report No：2090185R-E3032110108 Page: 67 of 71 (7) EUT Photo (8) EUT Photo Report No：2090185R-E3032110108 Page: 68 of 71 (9) EUT Photo (10) EUT Photo Report No：2090185R-E3032110108 Page: 69 of 71 (11) EUT Photo (12) EUT Photo Report No：2090185R-E3032110108 Page: 70 of 71 (13) EUT Photo (14) EUT Photo Report No：2090185R-E3032110108 Page: 71 of 71 (15) EUT Photo (Antenna)

Report No. 2090185R-E3082100013 Page: 1 of 9 RF Exposure Evaluation Declaration Product Name ： Hex Sense Trade Name ： Origin Wireless Taiwan Corporation Model No. ： Hex Sense FCC ID ： 2AW26TR-WIFISEN-X Applicant : Origin Wireless Taiwan Corp. Address : 3F A1-1 No. 1, Lixing 1st. Rd., Easr Dist. Hsinchu City 300, Taiwan Date of Receipt : Sep. 07, 2020 Date of Declaration : Nov. 19, 2020 Report No. : 2090185R-E3082100013 Report Version : V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of DEKRA Testing and Certification Co., Ltd. Report No. 2090185R-E3082100013 Page: 2 of 9 RF Exposure Evaluation Declaration Issued Date : Nov. 19, 2020 Report No. : 2090185R-E3082100013 Product Name : Hex Sense Applicant : Origin Wireless Taiwan Corp. Address : 3F A1-1 No. 1, Lixing 1st. Rd., Easr Dist. Hsinchu City 300, Taiwan Manufacturer : WNC VIETNAM CO., LTD. Address : Factory H2, Lot G1-3-4-6-8, Que Vo Industrial Park, Van Duong Ward, Bac Ninh City, Bac Ninh Province, Vietnam Trade Name : Origin Wireless Taiwan Corporation Model No. : Hex Sense FCC ID : 2AW26TR-WIFISEN-X EUT Voltage : AC 120V/60Hz Testing Voltage : AC 120V/60Hz Applicable Standard : FCC 47 CFR Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. Test Lab : Hsin Chu Laboratory Address : No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 310, Taiwan, R.O.C. TEL: +886-3-582-8001 / FAX: +886-3-582-8958 Test Result : Complied Tested By : ( Scott Chang / Senior Engineer ) Approved By : ( Louis Hsu / Deputy Manager ) Report No. 2090185R-E3082100013 Page: 3 of 9 Revision History Version Description Issued Date V1.0 Initial issue of report Nov. 19, 2020 Report No. 2090185R-E3082100013 Page: 4 of 9 1.1. Test Facility Ambient conditions in the laboratory: Items Test Item Required Test Site Temperature (C) Peak Output Power 15 - 35 1 Humidity (%RH) 25 - 75 Note: Test site information refers to Laboratory Information. Laboratory Information USA : FCC Registration Number: TW3024 Canada : IC Registration Number: 22397-1 / 22397-2 / 22397-3 The address and introduction of DEKRA Testing and Certification Co., Ltd. laboratories can be founded in our Web site: http://www.dekra.com.tw If you have any comments, please don’t hesitate to contact us. Our test sites as below: Test Laboratory DEKRA Testing and Certification Co., Ltd. Address 1. No.372, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan, R.O.C. 2. No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan, R.O.C. Phone number 1. +886-3-582-8001 2. +886-3-582-8001 Fax number 1. +886-3-582-8958 2. +886-3-582-8958 Email address [email protected] Website http://www.dekra.com.tw Report No. 2090185R-E3082100013 Page: 5 of 9 1.2. List of Test Equipment Peak Output Power / SR12-H Instrument Manufacturer Model No. Serial No. Cal. Date Next Cal. Date High Speed Peak Power Meter Dual Input Anritsu ML2496A 1602004 2019/12/02 2020/12/01 Pulse Power Sensor Anritsu MA2411B 1531043 2019/12/02 2020/12/01 Pulse Power Sensor Anritsu MA2411B 1531044 2019/12/02 2020/12/01 Power Meter Keysight 8990B MY51000248 2020/05/20 2021/05/19 Power Sensor Keysight N1923A MY57240005 2020/05/20 2021/05/19 Note: All equipment upon which need to calibrated are with calibration period of 1 year. 1.3. Uncertainty Test item Uncertainty Peak Output Power ± 1.27 dB Note: Determining compliance shall be based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Report No. 2090185R-E3082100013 Page: 6 of 9 2. RF Exposure Evaluation 2.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz RF Field Strength Limits for Controlled Use Devices (Controlled Environment) Frequency Range (MHz) Electric Field (V/m rms) Magnetic Field (A/m rms) Power Density (W/m2) Reference Period (minutes) 0.003-1023 170 180 - Instantaneous* 0.1-10 - 1.6/ ƒ - 6** 1.29-10 193/ ƒ 0.5 - - 6** 10-20 61.4 0.163 10 6 20-48 129.8/ ƒ 0.25 0.3444/ ƒ 0.25 44.72/ ƒ 0.5 6 48-100 49.33 0.1309 6.455 6 100-6000 15.60 ƒ 0.25 0.04138 ƒ 0.25 0.6455ƒ0.5 6 6000-15000 137 0.364 50 6 15000-150000 137 0.364 50 616000/ ƒ 1.2 150000-300000 0.354 ƒ 0.5 9.40 x 10-4 ƒ 0.5 3.33 x 10-4 ƒ 616000/ ƒ 1.2 Note: ƒ is frequency in MHz. *Based on nerve stimulation (NS). ** Based on specific absorption rate (SAR). Report No. 2090185R-E3082100013 Page: 7 of 9 Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 2.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Report No. 2090185R-E3082100013 Page: 8 of 9 2.3. Test Result of RF Exposure Evaluation Product Hex Sense Test Mode Transmit Mode Test Condition RF Exposure Evaluation Antenna Gain: The maximum antenna gain is 3.28 dBi for WiFi 5GHz and 0.44 dBi for Bluetooth. Output Power into Antenna & RF Exposure Evaluation Distance: WLAN Function 5GHz Band Mode Frequency (MHz) Conducted Output Power Powe…

Text truncated - open the document above for the full version.

Report No：2090185R-E3032110108 Page: 1 of 71 FCC Test Report Product Name ：Hex Sense Trade Name ：Origin Wireless Taiwan Corporation Model No. ：Hex Sense FCC ID ：2AW26TR-WIFISEN-X Applicant ： Origin Wireless Taiwan Corp. Address ： 3F A1-1 No. 1, Lixing 1st. Rd., Easr Dist. Hsinchu City 300, Taiwan Date of Receipt：Sep. 07, 2020 Issued Date ：Nov. 19, 2020 Report No. ：2090185R-E3032110108 Report Version ：V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of DEKRA Testing and Certification Co., Ltd. Report No：2090185R-E3032110108 Page: 2 of 71 Test Report Certification Issued Date: Nov. 19, 2020 Report No. : 2090185R-E3032110108 Product Name : Hex Sense Applicant : Origin Wireless Taiwan Corp. Address : 3F A1-1 No. 1, Lixing 1st. Rd., Easr Dist. Hsinchu City 300, Taiwan Manufacturer : WNC VIETNAM CO., LTD. Address : Factory H2, Lot G1-3-4-6-8, Que Vo Industrial Park, Van Duong Ward, Bac Ninh City, Bac Ninh Province, Vietnam Trade Name : Origin Wireless Taiwan Corporation Model No. : Hex Sense FCC ID : 2AW26TR-WIFISEN-X EUT Voltage : AC 120V/60Hz Testing Voltage : AC 120V/60Hz Applicable Standard : FCC CFR Title 47 Part 15 Subpart C Section 15.247: 2019 ANSI C63.10: 2013 Laboratory Name : Hsin Chu Laboratory Address : No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 310, Taiwan, R.O.C. TEL: +886-3-582-8001 / FAX: +886-3-582-8958 Test Result : Complied Documented By : ( Lyla Yang / Engineering Adm. Specialist ) Tested By : ( Scott Chang / Senior Engineer ) Approved By : ( Louis Hsu / Deputy Manager ) Report No：2090185R-E3032110108 Page: 3 of 71 Revision History Version Description Issued Date V1.0 Initial issue of report Nov. 19, 2020 Report No：2090185R-E3032110108 Page: 4 of 71 TABLE OF CONTENTS Description Page 1. General Information .................................................................................................................. 6 1.1. EUT Description ....................................................................................................................... 6 1.2. Test Mode ................................................................................................................................ 7 1.3. Tested System Details ............................................................................................................. 8 1.4. Configuration of tested System ................................................................................................ 8 1.5. EUT Exercise Software ............................................................................................................ 9 1.6. Comments and Remarks .......................................................................................................... 9 1.7. Test Facility ............................................................................................................................ 10 1.8. List of Test Equipment ............................................................................................................ 11 1.9. Duty cycle ............................................................................................................................... 13 1.10. Uncertainty ............................................................................................................................. 14 2. Conducted Emission .............................................................................................................. 15 2.1. Test Setup .............................................................................................................................. 15 2.2. Limits ...................................................................................................................................... 15 2.3. Test Procedure ....................................................................................................................... 16 2.4. Test Specification ................................................................................................................... 16 2.5. Test Result ............................................................................................................................. 17 3. Maximum peak conducted output power ................................................................................ 19 3.1. Test Setup .............................................................................................................................. 19 3.2. Limits ...................................................................................................................................... 19 3.3. Test procedures ..................................................................................................................... 19 3.4. Test Specification ................................................................................................................... 19 3.5. Test Result ............................................................................................................................. 20 4. Radiated Emission ................................................................................................................. 21 4.1. Test Setup .............................................................................................................................. 21 4.2. Limits ...................................................................................................................................... 22 4.3. Test Procedure ....................................................................................................................... 23 4.4. Test Specification ................................................................................................................... 23 4.5. Test Result ............................................................................................................................. 24 5. RF antenna conduc…

Text truncated - open the document above for the full version.

Report No：2090185R-E3032110108 Page: 58 of 71 Attachment 1  Test Setup Photograph < Conducted Emission > Test Mode: Mode 1: Transmit Mode Description： Front View of Conducted EmissionTest Setup Description： Back View of Conducted EmissionTest Setup Report No：2090185R-E3032110108 Page: 59 of 71 < Radiated Emission > Test Mode: Mode 1: Transmit Mode Description： Front View of Radiated Emission Test Setup(Bilog) Description： Back View of Radiated Emission Test Setup (Bilog) Report No：2090185R-E3032110108 Page: 60 of 71 Test Mode: Mode 1: Transmit Mode Description： Front View of Radiated Emission Test Setup (Horn) Description： Back View of Radiated Emission Test Setup (Horn)