2AW3IP110Smart Diagnostic System

1 User Manual Smart Diagnostic System Please read this manual carefully before use 2 Security information To ensure personal and operational safety while preventing equipment/vehicle damage, all personnel operating this device must thoroughly review the safety guidelines outlined in this manual. Given that vehicle maintenance involves various procedures, equipment, components, and technical expertise, coupled with differing operational methods among technicians and the extensive range of products tested by diagnostic applications, this manual cannot provide predictive safety recommendations for every scenario. In automotive maintenance, technicians are responsible for fully understanding the systems being tested and applying appropriate repair methods and testing procedures. During testing, proper operational protocols must be followed to avoid endangering personal safety, threatening others in the work area, or damaging equipment/vehicles under test. Before using any equipment, consult and comply with safety information provided by vehicle/equipment manufacturers along with applicable testing protocols. Please use this device strictly according to manual instructions, read, understand, and adhere to all safety information and directives within the manual. ※CAUTIONS Read this manual carefully before operating or maintaining the equipment 3 CATALOGUE Chapter 1 Product Awareness .................................................................................................... 4 1.1 Appearance and interface ................................................................................................ 4 1.2 QR1000 Tablet technical parameters ............................................................................... 6 Chapter II Product Usage .............................................................................................................. 7 2.1 Navigation bar introduction ............................................................................................ 7 2.2 Product connection mode .............................................................................................. 8 4 Chapter I Product Awareness 1.1 Appearance and interface Car intelligent diagnostic tablet 1. Type-C Port 2. Reset Hole 3. Power Button 4. Microphone 5. Pogopin Port 6. Camera 7. Speaker 8. Tablet brackets 9. Nameplate 5 Automotive Diagnostic VCI Box VCI BOX ①Screen ②DB15 Port ③Nameplate ④USB Type-B Port 6 1.2 QR1000 Tablet technical parameters OS：Android CPU:8 core Screen: 10.1-inch IPS display Resolution: 1920 x 1200 Battery Capacity: 7.2V，6400mAh，46.08Wh Camera: 8 megapixels on the rear Input voltage: 5V/9V⎓ 3A Working temperature: 0~40°C External dimensions：298.6×202.2×35.8 (mm) Attention： 1. It is strictly prohibited to use non-standard power adapters, otherwise the consequences will be borne by oneself; 2. In order to better protect the battery, it is recommended to charge the diagnostic equipment at 0~40°C ambient temperature! 7 Chapter II Product Usage 2. 1 Navigation bar introduction 【function key 】 【 function declaration】 【 Screenshot】 【 decrease volume】 【Return to the previous interface】 【Return to the system home screen】 【Displays recently used programs】 【 Turn up the volume】 【Back to the diagnostic model interface】 【Screen recording is not enabled】 【 When the red dot in the upper right corner of the screen is flashing , the screen is being recorded】 8 2 . 2 Product connection mode 2.2.1 Wireless Connection 9 2.2.2 Wired Connection Precautions for Diagnosis： 1. Please use the wire harness with this product, and connect the wire harness according to the usage shown in the figure above; 2. To extend the service life of the battery, please use the charging cable and adapter to charge the intelligent diagnostic tablet; 3. Charge the intelligent diagnostic tablet for automobiles in an indoor environment of 0~40°C; 4. Before using the wireless connection, make sure that the serial number of the intelligent diagnosis tablet and the intelligent diagnosis box of the car is consistent; 5. Before diagnosing the test vehicle, it is recommended to ensure that the diagnostic software has been updated to the latest version; 6. In tablet communication with the vehicle, do not directly shut down. Cancel the task first and then return to the main interface . 14 Compliance Information FCC Compliance FCC ID: 2AW3IP110 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 14 FCC RF Exposure Warning Statement: This equipment has been tested for SAR compliance. This equipment shou…

Text truncated - open the document above for the full version.

1 User Manual Smart Diagnostic System Shenzhen Xtooltech Intelligent Co., Ltd. 2 Declaration Trademark： Shenzhen Yunjia Intelligent Technology Co., Ltd. has registered its trademark, and its logo is—— 朗仁诊断修车更简单— In countries where the trademarks, service marks, domain names, icons and company names of Shenzhen Yunjia Intelligent Technology Co., Ltd. have not been registered, Shenzhen Yunjia Intelligent Technology Co., Ltd. declares that it still owns the unregistered trademark service marks, domain names, icons and company names. The other product and company names and trademarks mentioned in this operation manual remain the property of the original registered company. Without the prior written consent of the owner, no one is allowed to use the trademarks, service marks, domain names, icons and company names of Shenzhen Yunjia Intelligent Technology Co., Ltd. or other companies mentioned therein. Copyright ： Without the written consent of Shenzhen Yunga Intelligent Technology Co., LTD., no company or individual may copy or back up this operation manual in any form (electronic, mechanical, photocopied, recorded or other forms) . Disclaimer and limitation of liability All information, specifications, and diagrams in this manual are updated as of the publication deadline. Shenzhen Yunga Intelligent Technology Co., Ltd. reserves the right to modify them without prior notice. While the content has been carefully reviewed, we do not guarantee the completeness or accuracy of the information (including but not limited to product specifications, functions, 3 and diagrams) . The company shall not be liable for any direct, indirect, special, or incidental damages, nor for any indirect economic losses (including but not limited to profit loss). ※CAUTIONS Before operating or maintaining the equipment, please read this manual carefully, especially the safety precautions. Service and support Official website www.xtooltech.com Contact number(switchboard) 0755-83663102 After-sales service hotline 4 0 0-8 8 0-3 0 8 6 Users in other countries or regions should contact the local distributor for technical support. 4 Security information To ensure personal and operational safety while preventing equipment/vehicle damage, all personnel operating this device must thoroughly review the safety guidelines outlined in this manual. Given that vehicle maintenance involves various procedures, equipment, components, and technical expertise, coupled with differing operational methods among technicians and the extensive range of products tested by diagnostic applications, this manual cannot provide predictive safety recommendations for every scenario. In automotive maintenance, technicians are responsible for fully understanding the systems being tested and applying appropriate repair methods and testing procedures. During testing, proper operational protocols must be followed to avoid endangering personal safety, threatening others in the work area, or damaging equipment/vehicles under test. Before using any equipment, consult and comply with safety information provided by vehicle/equipment manufacturers along with applicable testing protocols. Please use this device strictly according to manual instructions, read, understand, and adhere to all safety information and directives within the manual. 5 CATALOGUE Chapter I Product Awareness ........................................................................................... 7 1.1 Appearance and interface ........................................................................................... 7 1.2 PS90 Max Tablet technical parameters ......................................................................... 7 Chapter II Product Usage ............................................................................................................ 8 2.1 Navigation bar introduction .............................................................................................. 8 2.2 Product connection mode ................................................................................................ 9 6 Chapter 1 Product Awareness 1.1 Appearance and interface Car intelligent diagnostic tablet 1.Type-C Port 2. Reset Hole 3. Power Button 4. Microphone 5. Pogopin port 6.Camera 7.Speaker 8.Tablet brackets 9. Nameplate Automotive intelligent diagnostic box 1.Screen 2. DB15 Port 3. Nameplate 4. USB Type-B Port 5. DC port 7 1.2 PS90 Max Tablet technical parameters OS: Android CPU: 8 core Screen: 10.1-inch IPS display Resolution: 1920 x 1200 Battery Capacity: 7.2V，6400mAh，46.08Wh Camera: 8 megapixels on the rear Input voltage: 5V / 9 V ⎓ 3A Working temperature: 0 ~ 40°C External dimensions: 298.6×202.2×35.8 (mm) Attention： 1. It is strictly prohibited to use non-standard power adapters, otherwise the consequences will be borne by oneself; 2. In order to better protect the battery, it is recommended to charge the diagnostic equipment at 0~40°C ambient temperature! 8 C ha pte r I I P rod uct Us age 2.1 Navigation bar introduction 【function key 】 【 function declaration】 【 Screenshot】 【 decrease volume】 【Return to the previous interface】 【Return to the system home screen】 【Displays recently used programs】 【 Turn up the volume】 【Back to the diagnostic model interface】 【Screen recording is not enabled】 【Screen recording has been enabled】 9 2 . 2 Product connection mode 2.2.1 Wireless Connection 2.2.2 Wired Connection 10 Precautions for Diagnosis： 1. Please use the wire harness with this product, and connect the wire harness according to the usage shown in the figure above; 2. To extend the service life of the battery, please use the charging cable and adapter to charge the intelligent diagnostic tablet; 3. Charge the intelligent diagnostic tablet for automobiles in an indoor environment of 0~40°C; 4. Before using the wireless connection, make sure that the serial number of the intelligent diagnosis tablet and the intelligent diagnosis box of the car is consistent; 5. Before diagnosing th…

Text truncated - open the document above for the full version.

User Manual Smart Diagnostic System Shenzhen Xtooltech Intelligent Co., Ltd. Please read this user manual carefully before using the Smart Diagnostic System, referred to as the “ Scan Tool ” throughout this document. When reading the manual, please pay attention to the words “ Note ” or “ Caution ” , and read them carefully for appropriate operation. OPERATION INSTRUCTIONS For safe operation, please follow the instructions below: Keep the device away from heat or fumes when in use. If the vehicle battery contains acid, please keep your hands and skin or fire sources away from the battery during testing. The exhaust gas of the vehicle contains harmful chemicals. Please ensure adequate ventilation. Do not touch the vehicle cooling system components or exhaust manifolds when the engine is running due to the high temperatures reached. Make sure the car is securely parked, Neutral is selected or the selector is at the P or N position to prevent the vehicle from moving when the engine starts. Make sure the (DLC) Diagnostic Link Connector is functioning properly before starting the test to avoid damage to the Diagnostic Computer. Do not switch off the power or unplug the connectors during testing. Doing so may damage the ECU (Electronic Control Unit) and/or the Diagnostic Computer. CAUTIONS! Avoid shaking, dropping or dismantling the scan tool as it may damage the internal components. Use only your fingertips to touch the LCD screen. Hard or sharp objects may damage the scan tool. Do not use excessive force; Do not expose the screen to strong sunlight for a long period. Please keep the scan tool away from water and moisture. Store and use the scan tool only within the temperature ranges identified in the Technical Specifications section. Keep the unit away from strong magnetic fields. AFTERSALES-SERVICES E- Mail: supporting@xtooltech. com Tel: +86 755 21670995 or +86 755 86267858 (China) Official Website: www.xtooltech.com CATALOGUE 1. GENERAL INTRODUCTION ............................................................................. 4 1 . GENERAL INTRODUCTION The XTOOL P110 smart diagnostic system ( referred to as the “Scan Tool”) is an advanced scanning tool based on the Android operating system. It supports multiple languages and is suitable for different countries and regions. The advantage of this OBD-II (On-Board Diagnostics version 2) scanner is its comprehensive functions and its ability to quickly provide the user with more accurate diagnostic information. TABLET VCI BOX ①OB Dl-16port Q Nameplate ③Dcport ④USBType-cport VEHICLE CONNECTION Wireless Connection Wired Connection ※ For models with DoIP protocol communication, please be sure the device is connected to vehicle by wire. Precautions for Diagnosis 1. The voltage range on the car: +9~+36V DC; 2. When testing some special functions, the operator must operate according to the prompts and meet the test conditions. For some models [special functions], the conditions that need to be met are: engine water temperature 80 °C~ 105 °C, turn off headlights and air conditioners, keep the accelerator pedal in the released position, etc.; 3. The electronic control systems of different models are very complicated. If you encounter situations where it is impossible to test or a large amount of test data is abnormal, you can search for the ECU of the vehicle and select the menu for the model on the ECU nameplate; 4. If the vehicle type or electronic control system to be tested is not found in the diagnostic function, please upgrade the vehicle diagnostic software to the latest version using the Updates menu or consult the XTOOL technical service department; 5. Only wiring harnesses provided by XTOOL and designed for the device are permitted to be used with this device to avoid damage to the vehicle or the device; 6. When running a Diagnostics function, it is forbidden to shut down the device directly. You should cancel the task before returning to the main interface and then shutting down the device. COMPLIANCE INFORMATION FCC Compliance FCC ID: 2AW3IP110 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Exposure Warning Statement: This equipment has been tested for SAR compliance. This equipment should be installed and operated with minimum distance 0 mm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. For USA: The frequency stability of all transmission frequencies of U-NII-1, U- NII 2A, U-NII 2C a…

Text truncated - open the document above for the full version.

User Manual Smart Diagnostic System Shenzhen Xtooltech Intelligent Co., Ltd. Please read this user manual carefully before using the Smart Diagnostic System, referred to as the “ Scan Tool ” throughout this document. When reading the manual, please pay attention to the words “ Note ” or “ Caution ” , and read them carefully for appropriate operation. OPERATION INSTRUCTIONS For safe operation, please follow the instructions below: Keep the device away from heat or fumes when in use. If the vehicle battery contains acid, please keep your hands and skin or fire sources away from the battery during testing. The exhaust gas of the vehicle contains harmful chemicals. Please ensure adequate ventilation. Do not touch the vehicle cooling system components or exhaust manifolds when the engine is running due to the high temperatures reached. Make sure the car is securely parked, Neutral is selected or the selector is at the P or N position to prevent the vehicle from moving when the engine starts. Make sure the (DLC) Diagnostic Link Connector is functioning properly before starting the test to avoid damage to the Diagnostic Computer. Do not switch off the power or unplug the connectors during testing. Doing so may damage the ECU (Electronic Control Unit) and/or the Diagnostic Computer. CAUTIONS! Avoid shaking, dropping or dismantling the scan tool as it may damage the internal components. Use only your fingertips to touch the LCD screen. Hard or sharp objects may damage the scan tool. Do not use excessive force; Do not expose the screen to strong sunlight for a long period. Please keep the scan tool away from water and moisture. Store and use the scan tool only within the temperature ranges identified in the Technical Specifications section. Keep the unit away from strong magnetic fields. AFTERSALES-SERVICES E- Mail: supporting@xtooltech. com Tel: +86 755 21670995 or +86 755 86267858 (China) Official Website: www.xtooltech.com CATALOGUE 1. GENERAL INTRODUCTION ............................................................................. 4 1 . GENERAL INTRODUCTION The XTOOL N9EV 2 smart diagnostic system ( referred to as the “Scan Tool”) is an advanced scanning tool based on the Android operating system. It supports multiple languages and is suitable for different countries and regions. The advantage of this OBD-II (On-Board Diagnostics version 2) scanner is its comprehensive functions and its ability to quickly provide the user with more accurate diagnostic information. TABLET VCI BOX ①OB Dl-16port Q Nameplate ③Dcport ④USBType-cport VEHICLE CONNECTION Wireless Connection Wired Connection ※ For models with DoIP protocol communication, please be sure the device is connected to vehicle by wire. Precautions for Diagnosis 1. The voltage range on the car: +9~+36V DC; 2. When testing some special functions, the operator must operate according to the prompts and meet the test conditions. For some models [special functions], the conditions that need to be met are: engine water temperature 80 °C~ 105 °C, turn off headlights and air conditioners, keep the accelerator pedal in the released position, etc.; 3. The electronic control systems of different models are very complicated. If you encounter situations where it is impossible to test or a large amount of test data is abnormal, you can search for the ECU of the vehicle and select the menu for the model on the ECU nameplate; 4. If the vehicle type or electronic control system to be tested is not found in the diagnostic function, please upgrade the vehicle diagnostic software to the latest version using the Updates menu or consult the XTOOL technical service department; 5. Only wiring harnesses provided by XTOOL and designed for the device are permitted to be used with this device to avoid damage to the vehicle or the device; 6. When running a Diagnostics function, it is forbidden to shut down the device directly. You should cancel the task before returning to the main interface and then shutting down the device. COMPLIANCE INFORMATION FCC Compliance FCC ID: 2AW3IP110 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Exposure Warning Statement: This equipment has been tested for SAR compliance. This equipment should be installed and operated with minimum distance 0 mm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. For USA: The frequency stability of all transmission frequencies of U-NII-1, U- NII 2A, U-NII 2C…

Text truncated - open the document above for the full version.

User Manual Smart Diagnostic System Shenzhen Xtooltech Intelligent Co., Ltd. Please read this user manual carefully before using the Smart Diagnostic System, referred to as the “ Scan Tool ” throughout this document. When reading the manual, please pay attention to the words “ Note ” or “ Caution ” , and read them carefully for appropriate operation. OPERATION INSTRUCTIONS For safe operation, please follow the instructions below: Keep the device away from heat or fumes when in use. If the vehicle battery contains acid, please keep your hands and skin or fire sources away from the battery during testing. The exhaust gas of the vehicle contains harmful chemicals. Please ensure adequate ventilation. Do not touch the vehicle cooling system components or exhaust manifolds when the engine is running due to the high temperatures reached. Make sure the car is securely parked, Neutral is selected or the selector is at the P or N position to prevent the vehicle from moving when the engine starts. Make sure the (DLC) Diagnostic Link Connector is functioning properly before starting the test to avoid damage to the Diagnostic Computer. Do not switch off the power or unplug the connectors during testing. Doing so may damage the ECU (Electronic Control Unit) and/or the Diagnostic Computer. CAUTIONS! Avoid shaking, dropping or dismantling the scan tool as it may damage the internal components. Use only your fingertips to touch the LCD screen. Hard or sharp objects may damage the scan tool. Do not use excessive force; Do not expose the screen to strong sunlight for a long period. Please keep the scan tool away from water and moisture. Store and use the scan tool only within the temperature ranges identified in the Technical Specifications section. Keep the unit away from strong magnetic fields. AFTERSALES-SERVICES E- Mail: supporting@xtooltech. com Tel: +86 755 21670995 or +86 755 86267858 (China) Official Website: www.xtooltech.com CATALOGUE 1. GENERAL INTRODUCTION ............................................................................. 4 1 . GENERAL INTRODUCTION The XTOOL JT11 smart diagnostic system ( referred to as the “Scan Tool”) is an advanced scanning tool based on the Android operating system. It supports multiple languages and is suitable for different countries and regions. The advantage of this OBD-II (On-Board Diagnostics version 2) scanner is its comprehensive functions and its ability to quickly provide the user with more accurate diagnostic information. TABLET VCI BOX ①OB Dl-16port Q Nameplate ③Dcport ④USBType-cport VEHICLE CONNECTION Wireless Connection Wired Connection ※ For models with DoIP protocol communication, please be sure the device is connected to vehicle by wire. Precautions for Diagnosis 1. The voltage range on the car: +9~+36V DC; 2. When testing some special functions, the operator must operate according to the prompts and meet the test conditions. For some models [special functions], the conditions that need to be met are: engine water temperature 80 °C~ 105 °C, turn off headlights and air conditioners, keep the accelerator pedal in the released position, etc.; 3. The electronic control systems of different models are very complicated. If you encounter situations where it is impossible to test or a large amount of test data is abnormal, you can search for the ECU of the vehicle and select the menu for the model on the ECU nameplate; 4. If the vehicle type or electronic control system to be tested is not found in the diagnostic function, please upgrade the vehicle diagnostic software to the latest version using the Updates menu or consult the XTOOL technical service department; 5. Only wiring harnesses provided by XTOOL and designed for the device are permitted to be used with this device to avoid damage to the vehicle or the device; 6. When running a Diagnostics function, it is forbidden to shut down the device directly. You should cancel the task before returning to the main interface and then shutting down the device. COMPLIANCE INFORMATION FCC Compliance FCC ID: 2AW3IP110 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Exposure Warning Statement: This equipment has been tested for SAR compliance. This equipment should be installed and operated with minimum distance 0 mm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. For USA: The frequency stability of all transmission frequencies of U-NII-1, U- NII 2A, U-NII 2C a…

Text truncated - open the document above for the full version.