2AW3M-HELLO2HELLO2

www.solaborate.com The World’s Most Powerful Video Communication Device QUICK START GUIDE Dear Customer, THANK YOU 02 Thank you for purchasing HELLO 2 — An all-in-one communication device for Video Conferencing, Camera Feed with Voice and Motion detection, Night Vision, Wireless Screencasting, Screen Sharing, TV Streaming and more. 03 WHAT’S IN THE BOX HELLO 2 AND MANUAL ONE REMOTE CONTROL ONE HDMI CABLEONE GLOBAL POWER ADAPTER 14 Bluetooth: 2.402GHz - 2.480GHz Max. output power: 9.79 dBm WiFi 2.4GHz: 2.4 GHz - 2.4835 GHz (2.4 GHz ISM Band) Max. output power: 19.86 dBm WiFi 5GHz: 5.15 - 5.35GHz, 5.47 - 5.725GHz and 5.725 - 5.85GHz Max. output power: 21.81 dBm 5150-5350MHz for this device are restricted to indoor use only within all European Union countries. Declaration of EU Compliance Hereby, Solaborate Inc. declares that the radio equipment type HELLO2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https:\\www.solabo- rate.com 04 Once you unbox the HELLO 2 device, follow these steps to connect HELLO 2 to your TV: 1. Place the HELLO 2 device on top or bottom of your TV. Use the hinge to clamp the HELLO 2 to the TV. 2. Plug in the power adapter on the back of the HELLO 2 device. 3. Connect the HELLO 2 to your TV via the HDMI cable. CONNECTING HELLO 2 TO YOUR TV Note: In case you are not using WiFi, make sure to connect a LAN/ Ethernet cable on the back of the HELLO 2 device. 13 compromettre le fonctionnement. Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20cm entre le radiateur et votre corps. Le dispositif utilisé dans la bande 5150-5250 MHz est réservé à une utilisation en intérieur afin de réduire le risque de brouillage préjudiciable aux systèmes mobiles par satellite dans le même canal. 1205 1. Connect the device to either Ethernet or Wifi using the HELLO Remote 3 after device has successfully booted and shown on the TV screen. 2. Once the device is connected to the Internet the device will start downloading the latest update or your specific company software configured through the online administration console. 3. In case there are network restrictions the IT Admin should whitelist these domains in order for the device to receive the update: login.solaborate.com api.solaborate.com signalin.solaborate.com mobile.solaborate.com ota.solaborate.com 4. The device will install the downloaded update and the device will be ready for use. SETTING UP HELLO 2 ISED Regulatory Compliance This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en 11 06 In the box with the HELLO 2 device, you will find a remote control which you can use to operate the applications on the HELLO 2. Please ensure the batteries on the remote are plugged in before use. Here is how to use the remote control buttons: 1. Power Button (hold the button for 3 seconds to reboot HELLO 2). 2. Accept/Decline (use the green button to answer calls and the red button to decline calls). 3. Mute Button (use the button to mute the microphones during a call on HELLO 2). 4. Arrow Keys (use the buttons to navigate through the menu). 5. OK Button (use the button to select or click on the menu). 6. Mouse Button (use the button to enable or disable the air mouse). 7. Home Button (use the button to go to home screen). 8. Back Button (use the button to go to the previous screen). 9. Volume Buttons (use the buttons to increase or decrease the volume). HOW TO USE THE REMOTE CONTROL FCC Regulatory Compliance FCC SDoC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifier Trade Name: Solaborate Model No.: HELLO2 Responsible Party – U.S. Contact Information US Company Name: Solaborate Inc. Address: #283-8300 Utica Ave, Rancho Cucamonga, CA 91730 USA Telephone number or internet contact information: 909-947-7851 This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. HELLO 2 REMOTE DIAGRAM Power Button Mute Button Home Button Arrow Keys OK Button Mouse Button Back Button Volume Buttons Decline the Call Accept the Call 10 07 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reas…

Text truncated - open the document above for the full version.

Solaborate Inc. Date: ​08/07/2020 TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: ​FCC ID: 2AW3M-HELLO2 To whom it may concern: We, the undersigned, hereby authorize ​SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch​ and Keny Xu in ​SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch​ to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with ​Solaborate Inc. This authorization is valid until further written notice from the applicant. Print Name: Labinot Bytyqi Title: CEO Signature: On behalf of Company: Solaborate Inc. Telephone: 9092759196 E-mail: [email protected]

Solaborate Inc. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From:Solaborate Inc. 8300 Utica Ave #283, Rancho Cucamonga California 91730 United States Regarding: Confidentiality Request regarding application for ​FCC ID: 2AW3M-HELLO2 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 45 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Labinot Bytyqi Title: CEO Signature: On behalf of Company: Solaborate Inc. Telephone: 9092759196 E-mail: [email protected]

Applicant Declaration Applicant Legal Business Name Solaborate Inc. Address 8300 Utica Ave #283, Rancho Cucamonga California 91730 United States Grantee Code 2AW3M FCC ID 2AW3M-HELLO2 Authorized Contact Name Labinot Bytyqi Contact Email [email protected] Contact Phone 9092759196 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: labeling the equipment with the exact FCC ID as specified in this application, compliance statement labeling pursuant to the applicable rules, compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant ​shall​ make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant ​shall​, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: ​https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: ​https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: ​https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Declaration Rev:0.0 Applicant Declaration Applicant Signature: Date:​ 08/07/2020 Print Name: Labinot Bytyqi Title: CEO *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 6 External Photos for SZEM2007006574CR FCC ID: 2AW3M-HELLO2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 6 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 6

  www.solaborate.com #283-8300 Utica Ave Rancho Cucamonga California 91730 United States (Label location: back side of the device)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 11 Internal Photos for SZEM2007006574CR FCC ID: 2AW3M-HELLO2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 11 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 11 NFC Antenna Connector Wifi-Bluetooth Antenna 0 Connector Wifi Antenna 1 Connector SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 11 Wifi Antenna 1 NFC Antenna Wifi-Bluetooth Antenna 0 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 8 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 9 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 10 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 11 of 11

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700657406 Page: 1 of 10 Keny Xu EMC Laboratory Manager 1 Cover page RF Exposure Evaluation Report Application No.: SZEM2007006574CR Applicant: Solaborate Inc. Address of Applicant: 8300 Utica Ave #283 Rancho Cucamonga California 91730 3852 United States Manufacturer: Solaborate Inc. Address of Manufacturer: 8300 Utica Ave #283 Rancho Cucamonga California 91730 3852 United States Equipment Under Test (EUT): Product Name: HELLO2 Model No.: HELLO2 FCC ID: 2AW3M-HELLO2 Standards: 47 CFR Part 1.1307 47 CFR Part 1.1310 47 CFR Part 2.1091 Date of Receipt: 2020-07-24 Date of Test: 2020-07-20 to 2020-08-31 Date of Issue: 2020-09-04 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700657406 Page: 2 of 10 2 Version Revision Record Version Chapter Date Modifier Remark 01 2020-09-04 Original Authorized for issue by: Harry Wu/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700657406 Page: 3 of 10 3 Contents Page 1 COVER PAGE ............................................................................................................................................................1 2 VERSION .....................................................................................................................................................................2 3 CONTENTS .................................................................................................................................................................3 4 GENERAL INFORMATION ......................................................................................................................................4 4.1 GENERAL DESCRIPTION OF EUT ...............................................................................................................................4 4.2 TEST LOCATION .........................................................................................................................................................7 4.3 TEST FACILITY ..........................................................................................................................................................7 4.4 DEVIATION FROM STANDARDS ..................................................................................................................................7 4.5 ABNORMALITIES FROM STANDARD CONDITIONS .......................................................................................................7 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER .............................................................................................7 5 RF EXPOSURE EVALUATION ................................................................................................................................8 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ..............................................................................................................8 5.1.1 Limits ..............................................................................................................................................................8 5.1.2 Test Procedure ..............................................................................................................................................8 4.1.3 EUT RF EXPOSURE EVALUATION .............................................................................................................................9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700657406 Page: 4 of 10 4 General Information 4.1 General Description of EUT Power supply: AC 100-240V, 50-60Hz Power adapter: Model: EA1019AVRS-050 Input: AC 100-240V, 50-60Hz, 0.8A Output: DC 5.0V, 3.0A For BT: Bluetooth Version: V5.0 Operation Frequency: 2402MHz to 2480MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Modulation Type: GFSK, p/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Antenna Type: FPC Antenna Antenna Gain: 2.98dBi For BLE: Bluetooth Version: V5.0 Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Data Rate: 1Mb/s,2Mb/s Antenna Type: FPC Antenna Antenna Gain: 2.98dBi For 2.4GHz Wifi: Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK) 802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20):11 Channel Spacing: 5MHz Antenna Type: FPC Antenna Antenna Gain: Antenna 0 & 1: 2.98dBi SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700657406 Page: 5 of 10 Remark: Two Antennas can simultaneous transmit WIFI signal at 802.11n(HT20) mode. For 5GHz Wifi: Operation Frequency: Band Mode Frequency Range(MHz) Number of channels UNII Band I IEEE 802.11a 5180-5240 4 IEEE 802.11n/ac 20MHz 5180-5240 4 IEEE 802.11n/ac 40MHz 5190-5230 2 IEEE 802.11ac 80MHz 5210 1 UNII Band II-A IEEE 802.11a 5260-5320 4 IEEE 802.11n/ac 20MHz 5260-5320 4 IEEE 802.11n/ac 40MHz 5270-5310 2 IEEE 802.11ac 80MHz 5290 1 UNII Band II- C IEEE 802.11a 5500-5700 11 IEEE 802.11n/ac 20MHz 5500-5700 11 IEEE 802.11n/ac 40MHz 5510-5670 5 IEEE 802.11ac 80MHz 5530-5690 3 UNII Band III IEEE 802.11a 5745-5825 5 IEEE 802.11n/ac 20MHz 5745-5825 5 IEEE 802.11n/ac 40MHz 5755-5795 2 IEEE 802.11ac 80MHz 5775 1 Type of Modulation: IEEE 802.11a: OFDM(BPSK/QPSK/16QAM/64QAM) IEEE 802.11n: OFDM(BPSK/QPSK/16QAM/64QAM) IEEE 802.11ac: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) DFS mode: Slave without radar detection Antenna Type FPC Antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700657406 Page: 6 of 10 Antenna Gain Antenna 0 & 1: 3.5dBi Remark1: Two Antennas can simultaneous transmit WIFI signal at 802.11n(HT20), 802.11n(HT40), 802.11ac(HT20)…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700657402 Page: 1 of 87 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2007006574CR Applicant: Solaborate Inc. Address of Applicant: 8300 Utica Ave #283 Rancho Cucamonga California 91730 3852 United States Manufacturer: Solaborate Inc. Address of Manufacturer: 8300 Utica Ave #283 Rancho Cucamonga California 91730 3852 United States Equipment Under Test (EUT): EUT Name: HELLO2 Model No.: HELLO2 FCC ID: 2AW3M-HELLO2 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2020-07-24 Date of Test: 2020-07-24 to 2020-08-31 Date of Issue: 2020-09-04 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700657402 Page: 2 of 87 Revision Record Version Chapter Date Modifier Remark 01 2020-09-04 Original Authorized for issue by: Harry Wu/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700657402 Page: 3 of 87 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200700657402 Page: 4 of 87 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 CABLE ................................................................................................................................................. 6 4.3 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.4 MEASUREMENT UNCERTAINTY .............................................................................................................. 7 4.5 TEST LOCATION .................................................................................................................................... 8 4.6 TEST FACILITY ...................................................................................................................................... 8 4.7 DEVIATION FROM STANDARDS ............................................................................................................... 8 4.8 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 8 5 EQUIPMENT LIST ...................................................................................................................................... 9 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 14 6.1 ANTENNA REQUIREMENT .................................................................................................................... 14 6.1.1 Test Requirement: ....................................................................................................................... 14 6.1.2 Conclusion ................................................................................................................................... 14 6.2 OTHER REQUIREMENTS FREQUENCY HOPPING SPREAD SPECTRUM SYSTEM HOPPING SEQUENCE ........ 15 6.2.1 Test Requirement: ....................................................................................................................... 15 6.2.2 Conclusion ................................................................................................................................... 15 7 RADIO SPECTRUM MA…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM2007006574CR FCC ID: 2AW3M-HELLO2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup Radiated Spurious Emissions Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 Conducted RF Test Setup