2AW5A-CLH02LED Corn Lamp

LED Corn Light Instruction Can not use the electric generator to test the LED lamp.Please avoid using the led fixture in environment where there is smoke,sulfur, and corrosive substances. But if used in such environment, make sure the led fixture is well protected by an enclosed lampshade whose dimension is no less than below size, and whose material is either glass or semi-glass, semi-metallic. Surface of the lampshade shall not have any covering which prevents heat dissipation   Power W Vol um e CM 110 44*26*26 95 44*24*24 Rev A1  75 47*21*21 ADDED WEIGHT OF THE DEVICE MAY CAUSE INSTABILITY OF A FREE-STANDING PORTABLELUMINAIRE. USE ONLY WITH A PORTABLE LUMINAIRE THAT IS PROVIDED WITH A SHADE. THIS LAMP EMPLOYS LIGHT EMITTING DIODE TECHNOLOGY AND UNLIKE TUNGSTEN-HALOGEN LAMPS DOES NOT REQUIRE A BARRIER. LAMP IS SUITABLE FOR OPEN LUMINAIRES. NOT FOR EMERGENCY LIGHTING. ADDED WEIGHT OF THE DEVICE MAY CAUSE INSTABILITY OF A FREE STANDING PORTABLE LUMINAIRE. UTILISER UNIQUEMENT AVEC UNE LAMPE DE TABLE DOTÉE D’UN ABAT-JOUR. NE CONVIENT PAS AUX SORTIES DE SECOURS. AVERTISSEMENT: WARNING: AVERTISSEMENT - PRECAUTIONNEZ-VOUS CONTRE DES CHOCS ÉLECTRIQUES. L'INSTALLATION DES PIÈCES DE RECHANGE LED EST SEULEMENT EN CHARGE DES PROFESSIONNELS. PRECAUTIONNEZ-VOUS CONTRE FEU. INSTALLER DES PIÈCES DE RECHANGE SELON LES SPÉCIFICATIONS, VEILLER À CE QUE LA PUISSANCE D'ENTRÉE NE DÉPASSE PAS LA PUISSANCE D'ENTRÉE DE REMPLACEMENT DE LA LAMPE. NE FAITES PAS DE CONTACT AVEC LE CÂBLE POINTUS OU MÉTALLIQUES, AFIN D'ÉVITER LE FIL USÉ. VÉRIFIER LE CIRCUIT FERMÉ, AFIN DE DOMMAGES LES CÂBLES ET LES COMPOSANTS ÉLECTRONIQUES LORS DE L'INSTALLATION DE FORAGE. NE PAS MODIFIER LA STRUCTURE DU CIRCUIT FERMÉ ET LES COMPOSANTS ÉLECTRONIQUES OU FORAGE SUR CELUI-CI LORS DE L'INSTALLATION DES PIÈCES DE RECHANGE.WARNING – RISK OF FIRE OR ELECTRIC SHOCK. LED RETROFIT KIT INSTALLA-TION REQUIRES KNOWLEDGE OF LUMINARIES ELECTRICAL SYSTEMS. IF NOT QUALIFIED, DO NOT ATTEMPT INSTALLATION. CONTACT A QUALIFIED ELECTRI-CIAN. WARNING – RISK OF FIRE OR ELECTRIC SHOCK. INSTALL THIS KIT ONLY IN THE LUMINAIRES THAT HAVE THE CONSTRUCTION FEATURES AND DIMEN-SIONS SHOWN IN THE PHOTOGRAPHS AND/OR DRAWINGS AND WHERE THE INPUT RATING OF THE RETROFIT KIT DOES NOT EXCEED THE INPUT RATING OF THE LUMINAIRE. WARNING – TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR OTHER SHARP OBJECTS. WARNING – RISK OF FIRE OR ELECTRIC SHOCK. LUMINAIRE WIRING AND ELECTRICAL PARTS MAY BE DAMAGED WHEN DRILLING FOR INSTALLATION OF LED RETROFIT KIT. CHECK FOR ENCLOSED WIRING AND COMPONENTS.DO NOT MAKE OR ALTER ANY OPEN HOLES IN AN ENCLOSURE OF WIRING OR ELECTRICAL COMPONENTS DURING KIT INSTALLATION.THIS RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING JURISDICTION. INSTALLERS SHOULD NOT DISCONNECT EXISTING WIRES FROM LAMPHOLDER TERMINALS TO MAKE 6 CONNECTIONS AT LAMPHOLDER TERMINALS. INSTEAD INSTALLERS SHOULD CUT EXISTING LAMPHOLDER LEADS AWAY FROM THE LAMPHOLDER AND MAKE 6 ELECTRICAL CONNECTIONS TO LAMPHOLDER LEAD WIRES BY EMPLOYING APPLICABLE CONNECTORS. THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS OR NOT FOR EMERGENCY LIGHTING. LED Corn Light Instruction Application: LED Retrofit Kit make it simple to replace: parking lot lighting, shoebox lighting, street lighting, flood lighitng, wall pack lighting, and canopy lighting etc. Product features: ƹ 120/280 degree lighting.Can be with Clear or frosted PC cover. ƹ No fan. ƹƹ 75-110W lamp can be with AC120-277V internal driver.75-110W Sealant pouring for whole driver and lamp plastic housing. ƹ Long lifespan and good heat dissipation. ƹ Direct replacement for Metal Halide, easy Installation. ƹ Fits many different fixtures to replace traditional lamps. ƹ Installation Instructions: Warning: Please make sure the power is off before installation. 1. Turn off the power switch. 2. Screw off the CFL or MHL or HPS and so on, see Figure 3 4  3. Take out the led corn lamp and screw it on, make sure the side with the sensor hole is in the same direction as the luminous su rface of the lamp, and then unfold the radiator to 180 degrees, see Figure (1)(2). Figure 1 ,Figure 2  Regular lamp Lamp with motion sensor or PIR sensor, See the lower right corner for installation instructions.  1 2 :AC internal driver,(Note: Pls make sure to take off the ballast before installing led corn light,otherwise the ballast will produce the resonance of high voltage and makes led corn light breakdown.)4.security rope provided, pls fix the rope on the lamp with hand, then fix the wire of other end on the shell, see Figure 2 . 5. Turn on the power switch.( Finished!) Installation of or PIR sensor motion sensor  It could be easily installed using a straight screwdriver . Use a flat-blade screwdriver to unscrew the plug and remove the plug. And then, choose motion sensor or PIR sensor to install and tighten. the motion sensor has no dialing code, Note:and a remote control is needed for adjustment.Please refer to the instruction for remote control adjustment. Figure(3) Figure(4) Figure(1) Figure(2) FCCStatement ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowing twoconditions: (1)Thisdevicemaynotcauseharmfulinterference. (2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay causeundesiredoperation. 2.Changesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliancecouldvoidtheuser’sauthoritytooperatetheequipment. Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaclassB digitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovide reasonableprotectionagainstharmfulinterferenceinaresidentialinstallation. Thisequipmentgeneratesusesandcanradiateradiofrequenceenergyand,ifnot installedandusedinaccordancewiththeinstructions,maycauseharmfulinterferenceto radiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurina par…

Text truncated - open the document above for the full version.

SCS-F018:ProjectandProductCertificationRepresentativeAuthorizationLetterPage1of2Rev7.0 775MontagueExpressway Milpitas,CA95035 Tel:408-526-1188 Fax:408-526-1088 Email:[email protected] Website:https://www.cps.bureauveritas.com/ ProjectandProduct Certification Representative AuthorizationLetter ReasonforAmendment(current/obsolete) RevisionHistory ApprovedDate FromTo InitialRelease(obsolete)1.01.0Nov-14-2006 Revisedwording(obsolete)1.02.0Sept–25-2007 Updatedcompanytemplate(obsolete)2.03.0Jan-31-2012 Updatedletterinformation(obsolete)3.04.0May-23-2014 AddedFCCIDfield(obsolete)4.05.0Sep-16-2014 Updatedcompanyname&logo(current)5.06.0Jun-27-2018 UpdatedReferencesandContactinfo6.07.0Aug-30-2020 SCS-F018:ProjectandProductCertificationRepresentativeAuthorizationLetterPage2of2Rev7.0 ASMARTLIGHTCO.,LTD (2020-11-03) To:BVCPS,INC. 775MontagueExpressway, Milpitas,CA95035 USA DearSir/Madam, Re:ProductCertificationRepresentativeAuthorizationLetter We,_____ASMARTLIGHTCO.,LTD___herebyauthorizeBVCPS, Inc.toactasaCertificationBodyforcertifyingforthefollowing project(s): Product::LEDCornLamp FCCID:2AW5A-CLH02 M/N:AST-CLH02-075WXYMA1-abcK,AST-CLH02-095WXYMA1-abcK,AST- CLH02-110WXYMA1-abcK Sincerely, Admawilliams manager ASMARTLIGHTCO.,LTD 506NGARFIELDAVESUITE#210ALHAMBRA,CAUnitedStates.

SCS-F019:ConfidentialityRequestLetterPage 1 of 3 Rev7.0 775MontagueExpressway Milpitas,CA95035 Tel:408-526-1188 Fax:408-526-1088 Email:[email protected] Website:https://www.cps.bureauveritas.com/ Confidentiality RequestLetter ReasonforAmendment(current/obsolete) RevisionHistory ApprovedDate FromTo InitialRelease(obsolete)1.01.0Nov-14-2006 AddingCFR2.459(obsolete)1.02.0August–11-2008 Updatedcompanytemplate&Addedtext box(obsolete) 2.03.0Jan-31-2012 AddedICconfidentialityletterform (obsolete) 3.04.0March-26-2015 CorrectionstoSTCform.Addedreference toKDB(obsolete) 4.05.0Nov-19-2015 Updatedcompanylogo(current)5.06.0Jun-26-2019 UpdatedReferencesandContactInfo6.07.0Aug-30-2020 SCS-F019:ConfidentialityRequestLetterPage 2 of 3 Rev7.0 ASMARTLIGHTCO.,LTD (2020-11-03) To: FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046-1609 Cc: BureauVeritasConsumerProductsServicesInc. 775MontagueExpressway Milpitas,CA95035 Subject:ConfidentialityRequestforFCCID:2AW5A-CLH02 PursuanttoCFR47sections0.457and0.459,werespectfullyrequestpermanentconfidentialtreatmentofthe followingExhibitsaccompanyingthisapplicationbeheldconfidential: TypeofConfidentialityRequestedExhibit ShortTermPermanentBlockDiagram ShortTermExternalPhotos ShortTermPermanent i InternalPhotos ShortTermPermanentOperationalDescription/TheoryofOperation ShortTermPermanentPartsList ShortTermPermanentTune-UpProcedure ShortTermPermanentSchematics ShortTermTestSetupPhotos ShortTermPermanent i User’sManual Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedtothepublic. Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovideunjustifiedbenefitstoits competitors. PermanentConfidentiality: Theapplicantrequeststheexhibitslistedaboveaspermanentlyconfidentialbepermanentlywithheldfrom publicreviewduetomaterialsthatcontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic. Short-TermConfidentiality: Toavoidprematurereleaseofsensitiveinformationpriortomarketingorreleaseoftheproducttothepublic,the applicantrequeststhefollowingdocumentscontainedinthiscertificationapplicationbetemporarilywithheld frompublicdisclosureforaninitialperiodof45or180days;orforaspecifieddateofnottoexceed 180daysfromtheGrantDate Theapplicantunderstandsthatdisclosureofthisapplicationandallaccompanyingdocumentationwillnotbe madebeforethedateoftheGrantforthisapplication. Sincerely, SCS-F019:ConfidentialityRequestLetterPage 3 of 3 Rev7.0 Admawilliams manager ASMARTLIGHTCO.,LTD 506NGARFIELDAVESUITE#210ALHAMBRA,CAUnitedStates. i PermanentconfidentialitymayberequestedinaccordancewithFCCKDB726920

ASMARTLIGHTCO.,LTD Declarationonmodeldifference Wetheundersignedherebyconfirmthatthesemodelsareidentical,andallmodelshavethe sameRFmoduleandantenna,PCBlayout,schematicsandcomponent.Theappearanceand internalstructureofthethreemodelsareexactlythesame.Theproductisequippedwithan 75W/95W/110Wselectorswitchtoselectthepowerbyrotating. ProductionnameTrademarkFCCIDModelno. LEDCornLampN/A2AW5A-CLH02AST-CLH02-075WXYMA1-abcK, AST-CLH02-095WXYMA1-abcK, AST-CLH02-110WXYMA1-abcK (X=LEDmanufacturer,canbeanyletter. Y=diffusertypes:“F”forfrostedtypeand “C”forcleartype,a=thelampbasetype, canbe“E”forE39,“EX”forEX39,BLANK forE26.b=theTopcovermaterial,canbe “P”or“M”,“P”forplasticmaterial.c=XX, XXcanbetwodigitsforCCT.) Sincerely, Admawilliams manager ASMARTLIGHTCO.,LTD 506NGARFIELDAVESUITE#210ALHAMBRA,CAUnitedStates.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. Microwave sensor

ANTENNA

ReportNo.:EA20100244F030011of42 DongGuanAnciElectronicTechnologyCo.,Ltd 1-2Floor,BuildingA,No.11,Headquarters2Road,SongshanLakeHi-techIndustrialDevelopmentZone, DongguanCity,GuangdongPr.,China. Phone:86-769-85075888;Fax:86-769-85075898E-mail:[email protected] ELECTROMAGNETICEMISSIONSCOMPLIANCEREPORT INTENTIONALRADIATORCERTIFICATIONTO FCCPART15SUBPARTCREQUIREMENT OF LEDCornLamp Model:AST-CLH02-075WXYMA1-abcK,AST-CLH02-095WXYMA1-abcK, AST-CLH02-110WXYMA1-abcK (X=LEDmanufacturer,canbeanyletter.Y=diffusertypes:“F”forfrostedtypeand“C”forclear type,a=thelampbasetype,canbe“E”forE39,“EX”forEX39,BLANKforE26.b=theTopcover material,canbe“P”or“M”,“P”forplasticmaterial.c=XX,XXcanbetwodigitsforCCT.) TradeMark:N/A FCCID:2AW5A-CLH02 ReportNo.:EA20100244F03001 IssueDate:Nov.02,2020 Preparedfor ASMARTLIGHTCO.,LTD 506NGARFIELDAVESUITE#210ALHAMBRA,CAUnitedStates. Preparedby DongGuanAnciElectronicTechnologyCo.,Ltd. 1-2Floor,BuildingA,No.11,Headquarters2Road,Songshan,LakeHi-tech IndustrialDevelopmentZone,DongguanCity,GuangdongPr.,China. Thisreportshallnotbereproduced,exceptinfull,withoutthewrittenapprovalof DongGuanAnciElectronicTechnologyCo.,Ltd. ReportNo.:EA20100244F030012of42 TRFNo.FCCPart15.249/AVer.1.0 VERIFICATIONOFCOMPLIANCE Applicant: ASMARTLIGHTCO.,LTD 506NGARFIELDAVESUITE#210ALHAMBRA,CAUnitedStates. Manufacturer: ASMARTLIGHTCO.,LTD 506NGARFIELDAVESUITE#210ALHAMBRA,CAUnitedStates. ProductDescription:LEDCornLamp TradeMark:N/A ModelNumber: AST-CLH02-075WXYMA1-abcK,AST-CLH02-095WXYMA1-abcK, AST-CLH02-110WXYMA1-abcK (X=LEDmanufacturer,canbeanyletter.Y=diffusertypes: “ F ” forfrosted typeand “ C ” forcleartype,a=thelampbasetype,canbe “ E ” forE39, “EX”forEX39,BLANKforE26.b=theTopcovermaterial,canbe“P” or “ M ” , “ P ” forplasticmaterial.c=XX,XXcanbetwodigitsforCCT.) (Note:Thethreeseriesmodelshavethesamecircuitprinciple,power driveandinductioncontroller.Thedifferenceisthatthenumberoflamp beadsleadstodifferentpower.Wechoosethemaximumpowermodel: AST-CLH02-110WBCMA1-EXP50Ktodoallthetests.) Weherebycertifythat: TheaboveequipmentwastestedbyDongGuanAnciElectronicTechnologyCo., Ltd.Thetestdata,dataevaluation,testprocedures,andequipmentconfigurations showninthisreportweremadeinaccordancewiththeproceduresgiveninANSI C63.10-2013andtheenergyemittedbythesampleEUTtestedasdescribedinthis reportisincompliancewithconductedandradiatedemissionlimitsofFCCRulesPart 15.249(2020). DateofTest:Oct.21,2020toNov.02,2020 Preparedby: TomasYang/Supervisor Reviewer&Approved: AlanHe/Manager ReportNo.:EA20100244F030013of42 TRFNo.FCCPart15.249/AVer.1.0 ModifiedInformation VersionSummaryRevisionDateReportNo. Ver.1.0OriginalReport/EA20100244F03001 ReportNo.:EA20100244F030014of42 TRFNo.FCCPart15.249/AVer.1.0 TableofContents 1.GENERALINFORMATION ............................................................................................................. 5 1.1PRODUCTDESCRIPTION .............................................................................................................................. 5 1.2TESTFACILITY .............................................................................................................................................. 6 2.TESTCONFIGURATION ................................................................................................................. 7 3.SUMMARYOFTESTRESULTS ................................................................................................... 8 4.DESCRIPTIONOFTESTMODES ................................................................................................. 9 5.TESTSYSTEMUNCERTAINTY .................................................................................................. 10 6.CONDUCTEDEMISSIONSTEST ................................................................................................ 11 6.1MEASUREMENTPROCEDURE: ..................................................................................................................... 11 6.2TESTSET-UP(BLOCKDIAGRAMOFCONFIGURATION) ........................................................................... 11 6.3MEASUREMENTEQUIPMENTUSED: ........................................................................................................... 11 6.4CONDUCTEDEMISSIONLIMIT .................................................................................................................... 11 6.5MEASUREMENTRESULT: ........................................................................................................................... 12 6.5CONDUCTEDMEASUREMENTPHOTOS: .................................................................................................... 14 7.20DBBANDWIDTHTEST ............................................................................................................ 15 7.1MEASUREMENTPROCEDURE ...................................................................................................................... 15 7.2TESTSET-UP(BLOCKDIAGRAMOFCONFIGURATION) ........................................................................... 15 7.3MEASUREMENTEQUIPMENTUSED: ........................................................................................................... 15 7.4MEASUREMENTRESULTS: .......................................................................................................................... 15 8.BANDEDGETEST ........................................................................................................................ 17 8.1MEASUREMENTPROCEDURE ..................................................................................................................... 17 8.2TESTSET-UP(BLOCKDIAGRAMOFCONFIGURATION) .......................................................................... 18 8.3MEASUREMENTEQUIPMENTUSED: ........................................................................................................... 18 8.4MEASUREMENTRESULTS: .....................................................................................................…

Text truncated - open the document above for the full version.