2AW6C-5GAC5G 2.4GHz modem plus MB13 antenna

105 Edgeview Drive, Suite 300 Broomfield, CO 80021 USA +1 303 301 3200 business.gogoair.com Date: 12/29/2025 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: 2WA6C-5GAC 1. Gogo Business Aviation (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Gogo Business Aviation (“the applicant”) certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. 3. Gogo Business Aviation (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Michael H. Baker, Distinguished Member of the Technical Staff Gogo Business Aviation

105 Edgeview Drive, Suite 300 Broomfield, CO 80021 USA +1 303 301 3200 business.gogoair.com Date: 8/28/2025 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: 2AW6C-5GAC To whom it may concern: Gogo Business Aviation (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U.S. Agent Information: Michael H. Baker Gogo Business Aviation FCC FRN 0029823226 105 Edgeview Drive, Suite 300, Broomfield, CO 80021 [email protected] Sincerely yours, Michael H. Baker, Distinguished Member of the Technical Staff Gogo Business Aviation

Applicant/Grantee Gogo Business Aviation FCC ID: 2AW6C-5GAC Section 15.212 Modular Transmitters Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The 5GAC aircard is enclosed in a metal clamshell. Key radio elements on the aircard have additional metal shielding on the printed circuit board. See external and internal 5GAC picture exhibits in the application. Y 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over- modulation. Communication to modular transmitter is buffered through USB, Ethernet, and discrete IO. Y 3 The modular transmitter must have its own power supply regulation. Module has its own power supply regulation. See Schematic for details. Y 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. The 5GAC module is professionally installed into an LX5 cabinet by Gogo. Standard TNC cables are used between the LX5 and the antenna. The MB13 antenna is mounted to the underside of the aircraft. Only professional installers under NDA with Gogo are authorized to install Gogo’s LX5 cabinet and MB13 antenna equipment on aircraft. See LX5 installation manual. N 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Module was tested in standalone configuration. See Test Report for details. The LX5 cabinet/5GAC module is powered from Aircraft DC power so Section 15.207 does not apply. Cabinets installed with 5GAC module adhere to FAA RTCA/DO-160 Section 21 Conducted Emissions limits. Y Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the Gogo’s label shown below is permanently affixed to the 5GAC and pdf documents with the label and label location are included in the application. 5GAC Label: The LX5 cabinet containing the 5GAC is affixed with the following label: Y device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Gogo does not offer the 5GAC aircard as a standalone product. Both the 5GAC and the LX5 cabinet are manufactured by Gogo. Gogo production installs the 5GAC aircard into the LX5 cabinet. Gogo provides an installation manual for our cabinets which is included in the application for equipment authorization. Gogo does not produce a User Manual containing operating or installation instructions related to the 5GAC aircard modem. The modem will only be used as part of Gogo’s Air to Ground Broadband System, which is professional installed on aircraft and operates under Gogo…

Text truncated - open the document above for the full version.

105 Edgeview Drive, Suite 300 Broomfield, CO 80021 USA +1 303 301 3200 business.gogoair.com Date: 6/12/2025 UL LLC 12 Laboratory Dr. Research Triangle Park, NC 27709 USA To whom it may concern: I, the undersigned, hereby authorize UL LLC to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL LLC as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b) supply any and all information needed for the evaluation of the products for which certification is sought; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f) use certification only to indicate that products are certified in conformity with specified standards; g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l) keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, Michael H. Baker, Distinguished Member of the Technical Staff Gogo Business Aviation

105 Edgeview Drive, Suite 300 Broomfield, CO 80021 USA +1 303 301 3200 business.gogoair.com Date: 6/12/2025 To Whom It May Concern: Gogo declares that 36dBm EIRP (33.85dBm ERP) is used for RF exposure calculations. Sincerely Yours, Michael H. Baker, Distinguished Member of the Technical Staff Gogo Business Aviation

105 Edgeview Drive, Suite 300 Broomfield, CO 80021 USA +1 303 301 3200 business.gogoair.com Date: 6/12/2025 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: Request for Confidentiality FCC ID: 2AW6C-5GAC To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. • Schematic Diagram • Block Diagrams • Internal Photographs • Theory of Operation • Antenna Specifications and Reports • Tune up, Mod Desc, Install Oper Inst • Installation Manual Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the grant date: • External Photos • Test Setup Photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Michael H. Baker, Distinguished Member of the Technical Staff Gogo Business Aviation

105 Edgeview Drive, Suite 300 Broomfield, CO 80021 USA +1 303 301 3200 business.gogoair.com Date: 10/7/2025 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: Request for Installation Manual and 5GAC Internal Photo Confidentiality FCC ID: 2AW6C-5GAC To Whom It May Concern: This is a formal request to hold the Installation Manual (IM) for the LX5 cabinet and the internal photographs for FCC ID 2AW6C-5GAC long term confidential. This request is made under the FCC rules 47 CFR § 0.457 (d) and 47 CFR § 0.459 as the authority for requesting confidentiality. Our response follows guidance from FCC KDB 726920 D01 Confidentiality Request Procedures v01r02, Section IV, EXCEPTIONAL CIRCUMSTANCES sub paragraph 3) requesting exhibits not eligible for Long-Term Confidentiality to be held Long-Term Confidential. 1. Authority under FCC rules 47 CFR § 0.457 (d) and 47 CFR § 0.459 2. Type of Confidentiality Requested: Long Term Confidentiality 3. Why the material should be withheld from public inspection: The system being developed is unique to the industry and represents significant competitive advantage to Gogo Business Aviation over the systems currently in service by our competitors. The dissemination or posting of this technical information would reveal design concepts that are considered confidential intellectual property. 4. Specific confidential information: a. LX5 Install Manual i. Exhibit Type: PDF Document ii. Exhibit Name: LX5 Installation Manual in attached file named “D51600-500 LX5 Rev C.pdf” iii. Exhibit Description: Installation manual for the Gogo LX5 cabinet which houses Gogo’s 5G aircard covered under FCC ID 2AW6C-5GAC and Gogo’s DMA aircard covered under FCC ID 2AW6C-DMA. b. 5GAC and MB13 Internal Photographs i. Exhibit Type: PDF file ii. Exhibit Name: Internal Photos.pdf iii. Exhibit Description: Internal photographs of Gogo’s aircard and antenna covered under FCC ID 2AW6C- 5GAC. 5. Statement information is not publicly available: Gogo uses professional installers and requires NDAs with our installers. The LX5 Installation Manual is not publicly available. Gogo’s 5G aircard (5GAC) is enclosed in a metal clamshell which is enclosed in our LX5 cabinet. Only Gogo authorized employees are permitted to open the LX5, remove the clamshell, open the clamshell and service the 5GAC. The MB13 antenna is enclosed in a radome. Only First RF authorized employees are permitted to remove the radome and service the MB13 antenna. 6. Statement regarding trade secrets: The LX5 Installation Manual, and the internal photos of the 5GAC aircard and the MB13 antenna contain trade secrets that are not generally known or reasonably ascertainable that gives Gogo business and economic advantage over competitors. 7. Justification, Information and Additional Exhibits required in Section II Long Term Confidentiality part 3) are provided below. a. Proprietary technical information statement Gogo’s LX5 Installation Manual contain proprietary technical information intended for professional technicians obligated under an NDA. All sales and distribution of the installation manual is under an NDA that restricts the disclosure of the information. b. Additional information 1. Details on how the installation manual is controlled to prevent it from becoming public or disclosed to unauthorized persons. The IMs are Agile controlled documents that are accessible electronically on a Gogo controlled website for use behind a username and password issued by Gogo technical publications team and all users are registered and tracked. Accounts can be setup with expiration dates when needed. 2. Describe how public access is restricted. Gogo’s AVANCE LX5 is installed on aircraft. FAA requirements only allow authorized professional installers to do maintenance or installation on aircraft. Gogo contracts with professional installers to install our AVANCE equipment. Installers must sign an NDA which prevents them from disseminating the installation manual. 3. Statement on sales and final installer: All sales of the AVANCE LX5 non-consumer device are under an NDA which include third party sales. The final installer of the AVANCE LX5 is subject to the NDA. 4. Provide NDA exhibit: The attached exhibit titled “Gogo Mutual Nondisclosure Agreement – BA.pdf” is the NDA we require our installers to sign. Best Regards Michael H. Baker, Distinguished Member of the Technical Staff Gogo Business Aviation

Labels are permanently affixed with adhesive.

RF EXPOSURE REPORT Report Number: R16084104-E6 Applicant : Gogo Buisness Aviation 105 Edgeview Drive, Suite 300, Broomfeild, CO, 80021 United States Model : 5GAC (5G Aircard) FCC ID : 2AW6C-5GAC IC : 10226A-5GAC EUT Description : 5G 2.4GHz modem plus MB13 antenna Test Standard(s) : FCC Part 1 Subpart I FCC Part 2 Subpart J RSS 102 ISSUE 6 Date Of Issue: 2025-12-10 Prepared by: UL LLC 12 Laboratory Dr. Durham, NC 27713 U.S.A. TEL: (919) 549-1400 REPORT NO: R16084104-E6 DATE: 2025-12-10 FCC ID: 2AW6C-5GAC IC: 10226A-5GAC Page 2 of 10 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., Durham, NC 27713 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. Revision History Rev. Issue Date Revisions Revised By V1 2025-12-10 Initial Issue Manish Baral REPORT NO: R16084104-E6 DATE: 2025-12-10 FCC ID: 2AW6C-5GAC IC: 10226A-5GAC Page 3 of 10 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., Durham, NC 27713 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ......................................................................................................... 4 2. TEST METHODOLOGY ............................................................................................................................. 5 3. REFERENCES ........................................................................................................................................... 5 4. FACILITIES AND ACCREDITATION ......................................................................................................... 5 5. DECISION RULES AND MEASUREMENT UNCERTAINTY...................................................................... 5 5.1. METROLOGICAL TRACEABILITY..................................................................................................... 5 5.2. DECISION RULES ............................................................................................................................. 5 6. MAXIMUM PERMISSIBLE EXPOSURE (LIMITS AND EQUATIONS) ....................................................... 6 6.1. FCC RULES ....................................................................................................................................... 6 6.2. ISED RULES ...................................................................................................................................... 7 6.3. EQUATIONS ...................................................................................................................................... 8 7. RF EXPOSURE RESULTS ...................................................................................................................... 10 REPORT NO: R16084104-E6 DATE: 2025-12-10 FCC ID: 2AW6C-5GAC IC: 10226A-5GAC Page 4 of 10 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., Durham, NC 27713 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: Gogo Buisness Aviation 105 Edgeview Drive, Suite 300, Broomfeild, CO, 80021 United States EUT DESCRIPTION: 5G 2.4GHz modem plus MB13 antenna MODEL: 5GAC (5G Aircard) SERIAL NUMBER: 5180020702 SAMPLE RECEIPT DATE: 2025-10-15 DATE TESTED: 2025-11-07 to 2025-11-10 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J RSS 102 ISSUE 6 Complies Complies UL LLC. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. All samples tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. This document may not be altered or revised in any way unless done so by UL LLC. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL LLC. will constitute fraud and shall nullify the document. Approved & Released For UL LLC By: Prepared By: Michael Antola Manish Baral Senior Staff Engineer Engineer Consumer, Medical and IT Segment Consumer, Medical and IT Segment UL LLC UL LLC REPORT NO: R16084104-E6 DATE: 2025-12-10 FCC ID: 2AW6C-5GAC IC: 10226A-5GAC Page 5 of 10 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., Durham, NC 27713 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. 2. TEST METHODOLOGY All calculations were made in accordance with FCC Parts 1.1310, 2.1091, 2.1093, KDB 447498 D01 v06, KDB 447498 D03 V01, IEEE Std C95.1-2005, and IEEE Std C95.3-2002, IC Safety Code 6 and RSS 102 Issue 6. 3. REFERENCES Refer to UL report R16084104-E3 for the 2.4 GHz test results. 4. FACILITIES AND ACCREDITATION UL LLC is accredited by A2LA, certification # 0751.06, for all testing performed within the scope of this report. Testing was performed at the locations noted below. Address ISED CABID ISED Company Number FCC Registration ☐ Building: 12 Laboratory Dr RTP, NC 27709, U.S.A US0067 2180C 825374 ☒ Building: 2800 Perimeter Park Dr. Suite B Morrisville, NC 27560, U.S.A 27265 5. DECISION RULES AND MEASUREMENT UNCERTAINTY 5.1. METROLOGICAL TRACEABILITY The measuring equipment utilized to perform the tests documented in this report has been calibrated in accordance with the manufacturer's recommendations, and is traceable to recognized national standards. 5.2. DECISION RULES For all tests where the applicable U LAB <…

Text truncated - open the document above for the full version.

TEST REPORT Report Number: R16084104-E3 Applicant : Gogo Buisness Aviation 105 Edgeview Drive, Suite 300, Broomfield, CO, 80021 United States Model : 5GAC FCC ID : 2AW6C-5GAC IC : 10226A-5GAC EUT Description : 5G 2.4GHz modem plus MB13 antenna Test Standard(s) : FCC 47 CFR PART 15 SUBPART C ISED RSS-247 ISSUE 4 ISED RSS-GEN ISSUE 5 + A1 + A2 Date Of Issue: 2025-12-29 Prepared by: UL LLC 12 Laboratory Dr. Durham, NC 27713 U.S.A. TEL: (919) 549-1400 REPORT NO: R16084104-E3 DATE: 2025-12-29 FCC ID: 2AW6C-5GAC IC: 10226A-5GAC Page 2 of 177 UL LLC 12 Laboratory Drive, Durham, NC 27713; USA TEL:(919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC REPORT REVISION HISTORY Rev. Issue Date Revisions Revised By V1 2025-12-10 Initial Issue Manish Baral V2 2025-12-29 Updates to Sections 9.4 and 9.6 based on TCB feedback. Misc. editorial updates made throughout the report as well. Mike Antola REPORT NO: R16084104-E3 DATE: 2025-12-29 FCC ID: 2AW6C-5GAC IC: 10226A-5GAC Page 3 of 177 UL LLC 12 Laboratory Drive, Durham, NC 27713; USA TEL:(919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC TABLE OF CONTENTS REPORT REVISION HISTORY ................................................................................................. 2 TABLE OF CONTENTS ............................................................................................................ 3 1. ATTESTATION OF TEST RESULTS ................................................................................. 5 2. TEST RESULTS SUMMARY .............................................................................................. 6 3. TEST METHODOLOGY ..................................................................................................... 6 4. FACILITIES AND ACCREDITATION ................................................................................. 6 5. DECISION RULES AND MEASUREMENT UNCERTAINTY .............................................. 7 5.1. METROLOGICAL TRACEABILITY .............................................................................. 7 5.2. DECISION RULES ....................................................................................................... 7 5.3. MEASUREMENT UNCERTAINTY ............................................................................... 7 5.4. SAMPLE CALCULATION ............................................................................................ 7 6. EQUIPMENT UNDER TEST ............................................................................................... 9 6.1. EUT DESCRIPTION .................................................................................................... 9 6.2. MAXIMUM OUTPUT POWER...................................................................................... 9 6.3. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................. 9 6.4. SOFTWARE AND FIRMWARE .................................................................................... 9 6.5. WORST-CASE CONFIGURATION AND MODE .........................................................10 6.6. DESCRIPTION OF TEST SETUP ...............................................................................11 7. MEASUREMENT METHOD...............................................................................................12 8. TEST AND MEASUREMENT EQUIPMENT ......................................................................13 9. RADIATED TEST RESULTS .............................................................................................15 9.1. ON TIME AND DUTY CYCLE .....................................................................................15 9.2. 99% BANDWIDTH ......................................................................................................17 9.2.1. QPSK 12RB MODE .............................................................................................17 9.2.2. QPSK 200RB MODE ...........................................................................................18 9.2.3. 16QAM 12RB MODE ...........................................................................................19 9.2.1. 16QAM 200RB MODE .........................................................................................20 9.2.1. 64QAM 12RB MODE ...........................................................................................21 9.2.1. 64QAM 200RB MODE .........................................................................................22 9.3. 6 dB BANDWIDTH ......................................................................................................23 9.3.1. QPSK 12RB MODE .............................................................................................23 9.3.2. QPSK 200RB MODE ...........................................................................................24 9.3.3. 16QAM 12RB MODE ...........................................................................................25 9.3.4. 16QAM 200RB MODE .........................................................................................26 REPORT NO: R16084104-E3 DATE: 2025-12-29 FCC ID: 2AW6C-5GAC IC: 10226A-5GAC Page 4 of 177 UL LLC 12 Laboratory Drive, Durham, NC 27713; USA TEL:(919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC 9.3.5. 64QAM 12RB MODE ...........................................................................................27 9.3.6. 64QAM 200R…

Text truncated - open the document above for the full version.