2AW6W-DPA01-1Pet polisher

Instruction Manual Please read the quick start before beginning. Thanks for purchasing! The dog training collar is designed to let dogs live safely, happily and get along with people more harmoniously. Warning Do not use with aggressive dogs. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certified trainer. Caution Safety during on-leash training. It is vitally important that you and your dog remain safe while learning during on-leash training. Your dog should be on a strong leash, long enough for him to attempt to chase an object, but short enough for him not to reach a road or other unsafe area. You must also be physically strong enough to restrain your dog when he tries to chase. Caution Risk of skin damage. Please read and follow the instructions in this manual. Proper fit of the collar is important. A collar worn for too long or made too tight on the pet’s neck may cause skin damage ranging from redness to pressure ulcers. This condition is commonly known as bed sores.  Avoid leaving the collar on the dog for more than 12 hours per day.  When possible reposition the collar on the pet’s neck every 1 to 2 hours.  Never connect a lead to the electronic collar; it will cause excessive pressure on the contacts.  If a rash or sore is found, discontinue use of the collar until the skin has healed.  If the condition persists beyond 48 hours, see your veterinarian.  This product is not a toy, please keep away from children.  This product is only for use with healthy dogs. Overview Remote A. Shock Level + B. Shock Level – C. On/Off Button D. Tone Button E. Vibration Button F. Shock Button G. Charging Port Re ce iver Collar H. Contact Points I. On/Off Button J. Charging Port (with cover) K. Contact spring sheet Se tting Up the Product Before you can use the Dog Training Collar, you must set up the product as below steps: 1. Charging the Remote and the Receiver Collar. 2. Prepare the Remote and turn it on. 3. Prepare the Receiver Collar and turn it on. 4. Function test, test function of buttons before wearing it on dog. 5. How to use the Test Lamp, test Shock function or use as a spanner. 6. Pair the Remote and the Receiver Collar。 1. Plug in and fully charge the Remote and the Receiver collar. 2 hours charging time is sufficient for battery to be fully charged. 2. When full charged, the red LED on the Receiver Collar will become green. The Battery Display of the Remote will stop cycling and appear full. 3. Please replace the rubber cover when the Receiver Collar is full charged. Tips: 1. Excessive charging will shorten battery life. Only charge them when batteries are low. 2. When you’re not using the collar, please turn it off to increase the battery life. Note : Please use the Output: DC 5V 500-1000mA charger to charge the product. Don’t use a charger that does not meet the specifications to charge the product. Pre pare the Remote Turn ON/OFF the Remote 1. Press the ON/OFF button to turn the remote ON. 2. LED screen will show the information of current channel, battery power and levels. If not, please charge the remote. 3. Long press the ON/OFF button to turn the remote OFF. Pre pare the Receiver Please use our distribution test tool to install the contact points. You can also choose to use contact spring sheet, which make the contact more effective and more comfortable. Asse mbly Collar Please refer to the picture to wear the collar on the dog's neck. Adjust the length of the collar. Turn on the Receiver Collar  Press the On/Off Button the Green LED light comes on.  In normal mode, the Green LED will flash every 2 seconds, indicating the Receiver Collar is on and ready to receive a signal from the Remote. Turn off the Re ceiver Collar Press On/Off Button, then press and hold On/Off Button again until the Red LED light flashes 3 times to shut off (This takes approximately 3 seconds). Release the On/Off Button. NOTE: To extend the life of the batteries, please turn the Receiver Collar off when it is not in use. Function Test We recommend you experience firsthand how the different levels feel on yourself and always begin at the lowest level, and increase the levels up to your personal comfort levels. 1. Hold your remote approximately 2 ft. from the training collar. Press the Vibration Button continuously for 1 to 2 seconds. You should feel continuous vibration. 2. Pressto decrease levels. Starting at level 1,press the Shock Button. 3. Increase the level until the sensation begins to feel uncomfortable. NOTE: Continuous stimulation will transmit for no more than 10 continuous seconds. To reactivate, release and repress the button. Tone: sends a tone with non-adjustable level to the Receiver Collar. Vibration: sends a vibration with non-adjustable level to the Receiver Collar. Shock: sends 1-16 adjustable levels of static stimulation to the Receiver Collar. Slide up, control dog 1, slide down, control dog 2. Short press to turn on, long press to turn off. Press to increase the Shock Level Press to decrease the Shock Level. Note : The Shock Level can be adjusted from 1 to 16 levels , please adjust it properly as per your dog’s reaction. It is not recommended to press and hold the Vibration/Shock Button too long to avoid physical or psychological hurt to the dog. How to Use the Test Lamp Shock Function Test 1. Turn on the Receiver Collar. 2. Hold the Test Lamp contacts against the Contact Points (or Conductive Silicone). 3. Press the Shock Button and the Test Lamp will be lighted. It will be lighter accordingly with the Shock Level increasing. As a Spanner Use the Test Lamp to tighten or loosen the Contact Points when prepare the Receiver Collar. Pair the Remote and the Receiver Collar 1. Use the switch on the Remote to select Dog 1 . 2. With the Remote turned on and the Receiver Collar turned off, press and hold the ON/OFF Button on the Receiver Colla…

Text truncated - open the document above for the full version.

Shenzhen Deji Innovation Industrial Co. , Ltd Agent Authorization Company: Shenzhen Deji Innovation Industrial Co. , Ltd Address: B1 Area,5th Floor,Building C, FirstFlag Science and Technology Park, No 26 Baili Road, Nanwan Road, Longgang District, Shenzhen, China Product Name: Pet polisher Model Number(s): DPA01-1 Product Description: Pet polisher We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Aug. 17, 2020 Name: Yang Siting Title: manager Company: Shenzhen Deji Innovation Industrial Co. , Ltd

Shenzhen Deji Innovation Industrial Co. , Ltd Date: Aug. 17, 2020 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AW6W-DPA01-1 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Yang Siting Title: manager

SIZE: 30*10mm Pet polisher Model No.: DPA01-1 FCC ID: 2AW6W-DPA01-1

ANTENNA battery

Page 1 of 28 Report No.: HK2008072129-E Prepared for : Shenzhen Deji Innovation Industrial Co. , Ltd B1 Area,5th Floor,Building C, FirstFlag Science and Technology Park, No 26 Baili Road, Nanwan Road, Longgang District, Shenzhen, China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park, Fuhai Street, Bao'an District, Shenzhen City, China Date of Test: Jul. 24, 2020 ~ Aug. 12, 2020 Date of Report: Aug. 12, 2020 Report Number: HK2008072129-E TEST REPORT FCC PART 15 SUBPART C 15.231 Test Report On Behalf of Shenzhen Deji Innovation Industrial Co. , Ltd For Pet polisher Model No.: DPA01-1 FCC ID: 2AW6W-DPA01-1 Page 2 of 28 Report No.: HK2008072129-E TEST RESULT CERTIFICATION Applicant’s name .................. : Shenzhen Deji Innovation Industrial Co. , Ltd Address ................................... : B1 Area,5th Floor,Building C, FirstFlag Science and Technology Park, No 26 Baili Road, Nanwan Road, Longgang District, Shenzhen, China Manufacture's Name............. : Shenzhen Deji Innovation Industrial Co. , Ltd Address ................................... : B1 Area,5th Floor,Building C, FirstFlag Science and Technology Park, No 26 Baili Road, Nanwan Road, Longgang District, Shenzhen, China Product description Trade Mark .............................. : N/A Product name.......................... : Pet polisher Model and/or type reference . : DPA01-1 Standards............................... : 47 CFR FCC Part 15 Subpart C 15.231 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test .......................................... : Date (s) of performance of tests ............ : Jul. 24, 2020 ~ Aug. 12, 2020 Date of Issue .......................................... : Aug. 12, 2020 Test Result ............................................. : Pass Prepared by: Project Engineer Reviewed by: Project Supervisor Approved by: Technical Director Page 3 of 28 Report No.: HK2008072129-E Table of Contents Page 1. SUMMA RY ........................................................................................................................................................................................... 4 1.1. TEST STANDARDS....................................................................................................................................................................... 4 1.2. TEST DESCRIPTION.......................................................................................................................................................................... 4 1.3. TEST FACILITY ................................................................................................................................................................................. 5 1.4. STATEMEN T OF THE MEASUREMENT UNCERTAINTY............................................................................................................................ 5 2. GENERAL INFORMATION .................................................................................................................................................................. 6 2.1. ENVIRONMENTAL CONDITIONS ........................................................................................................................................................ 6 2.2. GENERAL DESCRIPTION OF EUT ...................................................................................................................................................... 6 2.3. DESCRIPTION OF TES T S ETUP .................................................................................................................................................. 6 2.4. LIST OF CHANNELS .......................................................................................................................................................................... 6 2.5. EQUIPMENTS USED DURING THE TEST ............................................................................................................................................. 7 2.6. RELATED SUBMITTAL(S) / GRANT (S) ............................................................................................................................................... 8 2.7. MODIFICATIONS ............................................................................................................................................................................. 8 3. TEST CONDITIONS AND RESULTS .................................................................................................................................................... 9 3.1. CONDUCTED EMISSIONS TEST ......................................................................................................................................................... 9 3.2. RADIATED EMISSIONS AND BAND EDGE .........................................................................................................................................12 3.3. 20DB BANDWIDTH.......................................................................................................................................................................16 3.4. TRANSMISSION TIME ....................................................................................................................................................................17 3.5. DUTY CYCLE .................................................................................................................................................................................18 3.6. ANTENNA REQ UIREMENT......................................…

Text truncated - open the document above for the full version.

30MHz-1000MHz Above 1000MHz Conducted Emission