2AWAH-LS9A10LED Strip Light

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name LUCKYSTAR ELECTRONIC TECHNOLOGY CO., LTD. Address 10 Fusheng Road, Hecheng street, Gaoming District, Foshan, Guangdong Grantee Code 2AWAH FCC ID 2AWAH-LS9A10 Authorized Contact Name Bill Du Contact Email [email protected] Contact Phone 0757-88268209 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2020 Aug 31 Print Name: Bill Du Title: Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

LUCKYSTAR ELECTRONIC TECHNOLOGY CO., LTD. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: LUCKYSTAR ELECTRONIC TECHNOLOGY CO., LTD. 10 Fusheng Road, Hecheng street, Gaoming District, Foshan, Guangdong Regarding: Confidentiality Request regarding application for FCC ID: 2AWAH-LS9A10 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 45 days from the grant date, whichever is less. If the device is marketed within 45 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Internal Photos Sincerely, Name (Printed): Bill Du Title: Engineer Signature: On behalf of Company: LUCKYSTAR ELECTRONIC TECHNOLOGY CO., LTD.

External photo

Internal photo

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM200401180402 Page: 1 of 28 FCC ID: 2AWAH-LS9A10 Kobe Jian EMC Laboratory Manager TEST REPORT Application No.: GZEM2004011804CR Applicant: LUCKYSTAR ELECTRONIC TECHNOLOGY CO.,LTD. Address of Applicant: 10# Fusheng Road, Hecheng street, Gaoming District, Foshan City, Guangdong, CHINA Manufacturer: The same as applicant. Address of Manufacturer: The same as applicant. Factory: The same as applicant. Address of Factory: The same as applicant. Equipment Under Test (EUT): FCC ID: 2AWAH-LS9A10 EUT Name: LED Strip Light Model No.: LS9A10-32FT, LS9A128-1-01 ¤ ¤ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: LSL /LUCKYSTAR Standard(s): 47 CFR Part 15, Subpart C 15.231 Date of Receipt: 2020-07-14 Date of Test: 2020-07-27 to 2020-08-13 Date of Issue: 2020-08-27 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM200401180402 Page: 2 of 28 Revision Record Version Chapter Date Modifier Remark 01 2020-08-27 Original Authorized for issue by: Tested By 2020-07-27 to 2020-08-13 Lily_Kuang /Project Engineer Date Checked By 2020-08-27 Ricky_Liu /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM200401180402 Page: 3 of 28 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.231 N/A 47 CFR Part 15, Subpart C 15.203 Pass N/A: Not applicable Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C 15.231 ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.231(c) Pass Dwell Time (15.231(a)) 47 CFR Part 15, Subpart C 15.231 ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.231(a) Pass Field Strength of the Fundamental Signal (15.231(b)) 47 CFR Part 15, Subpart C 15.231 ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.231(b) Pass Radiated Emissions & Restricted bands 47 CFR Part 15, Subpart C 15.231 & 15.209 ANSI C63.10 (2013) Section 6.4&6.5&6.6 47 CFR Part 15, Subpart C 15.231(b) & 15.209 Pass ¤ Declaration of EUT Family Grouping: Model No.: LS9A10-32FT, LS9A128-1-01 According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, only their item no.’s and outer decoration are different. Therefore only one model LS9A10-32FT was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM200401180402 Page: 4 of 28 3 Contents Page 1 Cover Page .................................................................................................................................................... 1 2 Test Summary ............................................................................................................................................... 3 3 Contents ........................................................................................................................................................ 4 4 General Information ..................................................................................................................................... 5 4.1 Details of E.U.T. ..................................................................................................................................... 5 4.2 Description of Support Units .................................................................................................................. 5 4.3 Measurement Uncertainty ...................................................................................................................... 5 4.4 Test Location ......................................................................................................................................... 6 4.5 Test Facility ............................................................................................................................................ 7 4.6 Deviation from Standards ...................................................................................................................... 8 4.7 Abnormalities from Standard Conditions ............................................................................................... 8 5 Equipment List .............................................................................................................................................. 9 6 Radio Spectrum Technical Requirement ................................................................................................. 11 6.1 Antenna Requirement .......................................................................................................................... 11 6.1.1 Test Requirement: ........................................................................................................................... 11 6.1.2 Conclusion ....................................................................................................................................... 11 7 Radio Spectrum Matter Test Results ........................................................................................................ 12 7.1 20dB Bandwidth ................................................................................................................................... 12 7.1.1 E.U.T. Operation .............................................................................................................................. 12 7.1.2 Test Setup Diagram ......................................................................................................................... 12 7.1.3 Measurement Procedure and Data .........................................................................................…

Text truncated - open the document above for the full version.

Test Setup photo 1.1 Field Strength of the Fundamental Signal (15.231(b)) Test Setup 1.2 Radiated Emissions Test Setup