2AWD8-CREAGLEVCIwireless diagnostic interface

User Manual CR Eagle High Cost Performance Professional Automotive Diagnostic Tool EN FR EN Trademarks iCarsoft, CR Eagle is trademarks of iCarsoft Technology Inc, registered in the United States and other countries. All other marks are trademarks or registered trademarks of their respective holders. Copyright Information No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of iCarsoft. Disclaimer of Warranties and Limitation of Liabilities All information, specifications and illustrations in this manual are based on the latest information available at the time of printing. iCarsoft reserves the right to make changes at any time without notice. While information of this manual has been carefully checked for accuracy, no guarantee is given for the completeness and correctness of the contents, including but not limited to the product specifications, functions, and illustrations. iCarsoft will not be liable for any direct, special, incidental, indirect damages or any economic consequential damages (including the loss of profits). IMPORTANT Before operating or maintaining this unit, please read this manual carefully, paying extra attention to the safety warnings and precautions. For Services and Support Http://www.icarsoft.us Http://www.icarsoft.com [email protected] For technical assistance in all other markets, please contact your local selling agent. Safety Information For your own safety and the safety of others, and to prevent damage to the device and vehicles upon which it is used, it is important that the safety instructions presented throughout this manual be read and understood by all persons operating or coming into contact with the device. There are various procedures, techniques, tools, and parts for servicing vehicles, as well as in the skill of the person doing the work. Because of the vast number of test applications and variations in the products that can be tested with this equipment, we cannot possibly anticipate or provide advice or safety messages to cover every circumstance. It is the automotive technician’s responsibility to be knowledgeable of the system being tested. It is crucial to use proper service methods and test procedures. It is essential to perform tests in an appropriate and acceptable manner that does not endanger your safety, the safety of others in the work area, the device being used, or the vehicle being tested. EN Before using the device, always refer to and follow the safety messages and applicable test procedures provided by the manufacturer of the vehicle or equipment being tested. Use the device only as described in this manual. Read, understand, and follow all safety messages and instructions in this manual. Safety Messages Safety messages are provided to help prevent personal injury and equipment damage. All safety messages are introduced by a signal word indicating the hazard level. DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders. WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders. Safety Instructions The safety messages herein cover situations iCarsoft is aware of. iCarsoft cannot know, evaluate or advise you as to all of the possible hazards. You must be certain that any condition or service procedure encountered does not jeopardize your personal safety. DANGER When an engine is operating, keep the service area WELL VENTILATED or attach a building exhaust removal system to the engine exhaust system. Engines produce carbon monoxide, an odorless, poisonous gas that causes slower reaction time and can lead to serious personal injury or loss of life. SAFETY WARNINGS  Always perform automotive testing in a safe environment.  Wear safety eye protection that meets ANSI standards.  Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.  Operate the vehicle in a well ventilated work area, for exhaust gases are poisonous.  Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and make sure the parking brake is engaged.  Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.  Be extra cautious when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.  Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby. EN  Do not connect or disconnect any test equipment while the ignition is on or the engine is running.  Keep the test equipment dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment as necessary.  Do not drive the vehicle and operate the test equipment at the same time. Any distraction may cause an accident.  Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment.  To avoid damaging the test equipment or generating false data, make sure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure.  Do not place the test equipment on the distributor of the vehicle. Strong electro-magnetic interference can damage the equipment.  Please ensure that the distance between the device and the human body is at least 20cm, otherwise personal injury may be caused. A1-2024.09 EN CONTENTS 1 Using this Manual .................................................................................................... 1 1.1 Illustrations .......................................................................................…

Text truncated - open the document above for the full version.

Externalphotos FCCID：2AWD8-CREAGLEVCI

2023.6.12 A0 接头 KG- 技术要求 1.材料 ：PC ，厚度0.2MM 2.产品表面清洁，边整齐无锯齿，无粘连拉丝。 3.未注尺寸以2D电子档实测为准，未注公差依 照图纸公差表； 47.6 mm 7 0 . 6 m m Operating Temp. : 0 to 40°C (32 to 104°F) Storage Temp. : -20 to 70°C (-4 to 158°F) OBD DLC Voltage Range: 9V - 18V Operating Current: 150mA@12V(Typical) Power Consumption:1.8W(Typical) Dimensions (W x H x D) : 168.0mm*98.0mm*35mm --- - FCC ID : 2AWD8-CREAGLEVCI Ask on one, ask iCarsoft. Trusted by DIYers of auto diagnosis over 120 countries around the globe. CR Eagle VCI Designed by iCarsoft in Washington D.C., Assembled in China. 4-R1.8 iCarsoft Technology Inc. Copyright©Icarsoft Technology Inc. All rights reserved. www.icarsoft.us www.icarsoft.com

Internalphotos FCCID：2AWD8-CREAGLEVCI ANT

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 RFExposureEvaluationReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlyto thesample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.:CQASZ20240801777E-02 Applicant: IcarsoftTechnologyInc. AddressofApplicant: 1629KSt.Suite300N.W.WashingtonD.C.,20006UnitedStates. EquipmentUnderTest(EUT): EUTName: wirelessdiagnosticinterface ModelNo.: CREagleVCI TestModelNo.: CREagleVCI BrandName: FCCID:2AWD8-CREAGLEVCI Standards: 47CFRPart1.1307 47CFRPart1.1310 447498D04InterimGeneralRFExposureGuidancev01 DateofReceipt:2024-08-21 DateofTest: 2024-08-21to2024-09-13 DateofIssue:2024-09-29 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (LewisZhou) ReviewedBy: (TimoLei) ApprovedBy: (AlexWang) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-02 Page:2of6 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20240801777E-02Rev.01 Initialreport 2024-09-29 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-02 Page:3of6 2Contents Page 1VERSION............................................................................................................................................................................2 2CONTENTS........................................................................................................................................................................3 ..................................................................................................................................................................................................3 3GENERALINFORMATION..............................................................................................................................................4 3.1CLIENTINFORMATION...................................................................................................................................................4 3.2GENERALDESCRIPTIONOFEUT...................................................................................................................................4 3.3GENERALDESCRIPTIONOF2.4GWIFICLASSIC...........................................................................................................4 4MPEEVALUATION...........................................................................................................................................................5 4.1RFEXPOSURECOMPLIANCEREQUIREMENT.................................................................................................................5 4.1.1Limits....................................................................................................................................................................5 4.1.2TestProcedure...................................................................................................................................................5 4.1.3EUTRFExposure..............................................................................................................................................6 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-02 Page:4of6 3GeneralInformation 3.1ClientInformation Applicant: IcarsoftTechnologyInc. AddressofApplicant: 1629KSt.Suite300N.W.WashingtonD.C.,20006UnitedStates. Manufacturer: IcarsoftTechnologyInc. AddressofManufacturer: 1629KSt.Suite300N.W.WashingtonD.C.,20006UnitedStates. Factory: DongguanYongdongElectronicTechnologyCo.,Ltd AddressofFactory: No.10,4thStreet,ZhangyangFuzhuIndustrialZone,Zhangmutoutown, DongguanCity 3.2GeneralDescriptionofEUT ProductName: wirelessdiagnosticinterface ModelNo.: CREagleVCI TestModelNo.:CREagleVCI TradeMark: SoftwareVersion: Boot:H23.10;Firmware:H24.06 HardwareVersion: V1.02 EUTPowerSupply: PowersupplyDC12VformOBD 3.3GeneralDescriptionof2.4GWIFIClassic OperationFrequency: 2412MHz~2462MHz TypeofModulation: IEEEfor802.11b:DSSS(CCK,DQPSK,DBPSK) IEEEfor802.11g:OFDM(64QAM,16QAM,QPSK,BPSK) IEEEfor802.11n(HT20andHT40):OFDM(64QAM,16QAM,QPSK,BPSK) NumberofChannel: IEEE802.11b/g,IEEE802.11nHT20:11Channels IEEE802.11nHT40:7Channels ChannelSeparation: 5MHz TransferRate: IEEEfor802.11b: 1Mbps/2Mbps/5.5Mbps/11Mbps IEEEfor802.11g: 6Mbps/9Mbps/12Mbps/18Mbps/24Mbps/36Mbps/48Mbps/54Mbps IEEEfor802.11n(HT20): 6.5Mbps/13Mbps/19.5Mbps/26Mbps/39Mbps/52Mbps/58.5Mbps/65Mbps IEEEfor802.11n(HT40): 13.5Mbps/27Mbps/40.5Mbps/54Mbps/81Mbps/108Mbps/121.5Mbps/135Mbps SampleType: MobilePortable AntennaType:PCBantenna AntennaGain:2.5dBi Note： Theaboveparameterswilldirectlyaffectthetestresults.Theinformationisprovidedbytheapplicant. ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-02 Page:5of6 4MPEEvaluation 4.1RFExposureComplianceRequirement 4.1.1Limits ThetableappliestoanyRFsource(i.e.,singlefixed,mobile,andportabletransmitters)andspecifiespower anddistancecriteriaforeachofthefivefrequencyrangesusedfortheMPElimits.Thesecriteriaapplyat separationdistancesfromanypartoftheradiatingstructureofatleastλ/2π.Thethresholdsarebasedonthe generalpopulationMPElimitswithasingleperfectreflection,outsideofthereactivenear-field,andinthemain beamoftheradiator.FormobiledevicesthatarenotexemptperTableB.1[Table1of§1.1307(b)(1)(i)(C)]at distancesfrom20cmto40cmandin0.3GHzto6GHz,evaluationofcompliancewiththeexposurelimitsin §1.1310isnecessaryiftheERPofthedeviceisgreaterthanERP20cminFormula(B.1)[repeatedfrom§ 2.1091(c)(1)and§1.1307(b)(1)(i)(B)]. IftheERPisnoteasilyobtained,thentheavailablemaximumtime-averagedpowermaybeused(i.e.,without considerationofERPonlyifthephysicaldimensionsoftheradiatingstructure(s)donotexceedtheelectrical lengthofλ/4oriftheantennagainislessthanthat…

Text truncated - open the document above for the full version.

Http://www.hlktech.com Tel:0755-83575155 Fax: 深圳市海凌科电子有限公司 Shenzhen Hi-Link Technology 112 Minkang Road, Bao 'an District, Shenzhen 0755-83575189 2.4G PCB ANTENNA SPEC(HLK-N2420) 机械性能 Mechanical Specifications 接头形式 Connector Type IPX 辐射材料 Radiating Element Material PCB Copper 天线尺寸 Dimension (mm) ~88 重量 Wight(Kg) 0.005 使用环境 Application Condition Indoor 工作温度 Operating Temperature(°C) -40~+70 储藏温度 Reposition Temperature(°C Name: 2.4G omnidirectional antenna frequency band: 2400-2500 Electrical Specifications 频带FrequencyRange(MHz) 增益Gain(dBi) 驻波比 V.S.W.R. ＜ 2400-2500 2.5 1.5 极化 Polarization Vertical 不圆度 Non-Circularity(dB) ±0.5 输入阻抗 Impedance(Ω) 50 雷电保护 Lightning Protection Direct Ground 最大功率 Maximum Input Power(W) 50 ) -55~+80 2.4G PCB antenna

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 TESTREPORT Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlyto thesample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.:CQASZ20240801777E-01 Applicant: IcarsoftTechnologyInc. AddressofApplicant: 1629KSt.Suite300N.W.WashingtonD.C.,20006UnitedStates. EquipmentUnderTest(EUT): Product: wirelessdiagnosticinterface ModelNo.: CREagleVCI TestModelNo.: CREagleVCI BrandName: FCCID:2AWD8-CREAGLEVCI Standards:47CFRPart15,SubpartC KDB558074D0115.247MeasGuidancev05r02 ANSIC63.10:2013 DateofReceipt:2024-08-21 DateofTest: 2024-08-21to2024-09-13 DateofIssue:2024-09-29 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove . TestedBy: (LewisZhou) ReviewedBy: (TimoLei) ApprovedBy: (AlexWang) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:2of90 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20240801777E-01Rev.01 Initialreport 2024-09-29 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:3of90 2TestSummary TestItemTestRequirementTestmethodResult AntennaRequirement47CFRPart15.203N/APASS ACPowerLine Conducted Emission 47CFRPart15.207ANSIC63.10-2013PASS ConductedPeak& AverageOutputPower 47CFRPart15.247ANSIC63.10-2013PASS 6dBOccupied Bandwidth 47CFRPart15.247ANSIC63.10-2013PASS PowerSpectralDensity47CFRPart15.247ANSIC63.10-2013PASS Band-edgeforRF ConductedEmissions 47CFRPart15.247ANSIC63.10-2013PASS RFConductedSpurious Emissions 47CFRPart15.247ANSIC63.10-2013PASS RadiatedSpurious Emissions 47CFRPart15.209ANSIC63.10-2013PASS Restrictedbandsaround fundamentalfrequency (RadiatedEmission) 47CFRPart15.205/15.209ANSIC63.10-2013PASS Remark: Thetestedsample(s)andthesampleinformationareprovidedbytheclient. Tx:InthiswholereportTx(ortx)meansTransmitter. Rx:InthiswholereportRx(orrx)meansReceiver. RF:InthiswholereportRFmeansRadiatedFrequency. CH:InthiswholereportCHmeanschannel. Volt:InthiswholereportVoltmeansVoltage. Temp:InthiswholereportTempmeansTemperature. Humid:InthiswholereportHumidmeanshumidity. Press:InthiswholereportPressmeansPressure. N/A:Inthiswholereportnotapplication ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:4of90 3Contents Page 1VERSION......................................................................................................................................................................2 2TESTSUMMARY........................................................................................................................................................3 3CONTENTS..................................................................................................................................................................4 4GENERALINFORMATION.......................................................................................................................................5 4.1CLIENTINFORMATION.............................................................................................................................................5 4.2GENERALDESCRIPTIONOFEUT..........................................................................................................................5 4.3PRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD................................................................................5 4.4TESTENVIRONMENTANDMODE...........................................................................................................................7 4.5DESCRIPTIONOFSUPPORTUNITS........................................................................................................................8 4.6TESTLOCATION......................................................................................................................................................8 4.7TESTFACILITY........................................................................................................................................................8 4.8STATEMENTOFTHEMEASUREMENTUNCERTAINTY.............................................................................................9 4.9DEVIATIONFROMSTANDARDS..............................................................................................................................9 4.10ABNORMALITIESFROMSTANDARDCONDITIONS................................................................................................9 4.11OTHERINFORMATIONREQUESTEDBYTHECUSTOMER....................................................................................9 4.12EQUIPMENTLIST................................................................................................................................................10 5TESTRESULTSANDMEASUREMENTDATA..................................................................................................11 5.1ANTENNAREQUIREMENT.....................................................................................................................................11 5.2CONDUCTEDEMISSIONS......................................................................................................................................12 5.3CONDUCTEDPEAK&AVERAGEOUTPUTPOWER.............................................................................................16 TestResult............................................................................................................................................................17 Note:......................................................................................................................................................................17 WhenDutycycle>98%,D.C.Fisnotrequired....................…

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:31of90 5.5PowerSpectralDensity TestRequirement:47CFRPart15CSection15.247(e) TestMethod:ANSIC63.10:2013 TestSetup: Offset=cableloss+attenuationfactor ExploratoryTestMode:Transmittingwithallkindofmodulations,datarates FinalTestMode:Onlytheworstcaseisrecordedinthereport. Limit:≤8.00dBm/3kHz TestResults:Pass ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:32of90 TestResult TestModeFrequency[MHz]Result[dBm/3kHz]Limit[dBm/3kHz]Verdict 11B 2412-19.9≤8.00PASS 2437-19.54≤8.00PASS 2462-18.77≤8.00PASS 11G 2412-22.46≤8.00PASS 2437-22.11≤8.00PASS 2462-20.6≤8.00PASS 11N20SISO 2412-18.29≤8.00PASS 2437-17.89≤8.00PASS 2462-16.45≤8.00PASS 11N40SISO 2422-17.36≤8.00PASS 2437-16.76≤8.00PASS 2452-14.99≤8.00PASS Note: WhenDutycycle>98%,D.C.Fisnotrequired. ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:33of90 TestGraphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:34of90 11G_Ant1_2412 11G_Ant1_2437 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:35of90 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:36of90 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:37of90 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:38of90 5.6Band-edgeforRFConductedEmissions TestRequirement:47CFRPart15CSection15.247(d) TestMethod:ANSIC63.10:2013 TestSetup: Offset=cableloss+attenuationfactor ExploratoryTestMode:Transmittingwithallkindofmodulations,datarates .FinalTestMode:Onlytheworstcaseisrecordedinthereport. Limit:Inany100kHzbandwidthoutsidethefrequencybandinwhichthespread spectrumintentionalradiatorisoperating,theradiofrequencypowerthatis producedbytheintentionalradiatorshallbeatleast30dBbelowthatinthe 100kHzbandwidthwithinthebandthatcontainsthehighestlevelofthe desiredpower,basedoneitheranRFconductedoraradiated measurement. TestResults:Pass ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:39of90 TestResult TestModeChNameFrequency[MHz]RefLevel[dBm]Result[dBm]Limit[dBm]Verdict 11B Low24123.71-41.26≤-26.29PASS High24623.65-41.33≤-26.35PASS 11G Low24120.39-36.46≤-29.61PASS High24622.08-39.49≤-27.92PASS 11N20SISO Low24120.36-39.53≤-29.64PASS High24622.07-40.67≤-27.93PASS 11N40SISO Low2422-2.80-34.26≤-32.8PASS High2452-1.83-40.06≤-31.83PASS ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:40of90 5.6.1TestGraphs 11B_Ant1_Low_2412 11B_Ant1_High_2462 11G_Ant1_Low_2412 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:41of90 11G_Ant1_High_2462 11N20SISO_Ant1_Low_2412 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:42of90 11N20SISO_Ant1_High_2462 11N40SISO_Ant1_Low_2422 11N40SISO_Ant1_High_2452 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:43of90 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:44of90 5.7RFConductedSpuriousEmissions TestRequirement:47CFRPart15CSection15.247(d) TestMethod:ANSIC63.10:2013 TestSetup: Offset=cableloss+attenuationfactor ExploratoryTestMode:Transmittingwithallkindofmodulations,datarates FinalTestMode:Onlytheworstcaseisrecordedinthereport. Limit:Inany100kHzbandwidthoutsidethefrequencybandinwhichthespread spectrumintentionalradiatorisoperating,theradiofrequencypowerthatis producedbytheintentionalradiatorshallbeatleast30dBbelowthatinthe 100kHzbandwidthwithinthebandthatcontainsthehighestlevelofthe desiredpower,basedoneitheranRFconductedoraradiated measurement. TestResults:Pass ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:45of90 TestResult TestModeFrequency[MHz] FreqRange [Mhz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict 11B 2412 Reference3.223.22---PASS 30~10003.22-50.06≤-26.78PASS 1000~265003.22-45.35≤-26.78PASS 2437 Reference3.723.72---PASS 30~10003.72-50.32≤-26.28PASS 1000~265003.72-45.7≤-26.28PASS 2462 Reference4.004.00---PASS 30~10004.00-49.9≤-26PASS 1000~265004.00-46.92≤-26PASS 11G 2412 Reference0.620.62---PASS 30~10000.62-49.12≤-29.38PASS 1000~265000.62-46.22≤-29.38PASS 2437 Reference0.890.89---PASS 30~10000.89-50.04≤-29.11PASS 1000~265000.89-47.04≤-29.11PASS 2462 Reference1.891.89---PASS 30~10001.89-50.09≤-28.11PASS 1000~265001.89-46.49≤-28.11PASS 11N20SISO 2412 Reference0.440.44---PASS 30~10000.44-49.32≤-29.56PASS 1000~265000.44-46.78≤-29.56PASS 2437 Reference1.051.05---PASS 30~10001.05-49.32≤-28.95PASS 1000~265001.05-46.46≤-28.95PASS 2462 Reference1.891.89---PASS 30~10001.89-48.06≤-28.11PASS 1000~265001.89-46.49≤-28.11PASS 11N40SISO 2422 Reference-2.77-2.77---PASS 30~1000-2.77-49.36≤-32.77PASS 1000~26500-2.77-47.51≤-32.77PASS 2437 Reference-1.65-1.65---PASS 30~1000-1.65-48.95≤-31.65PASS 1000~26500-1.65-46.91≤-31.65PASS 2452Reference-1.77-1.77---PASS ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:46of90 30~1000-1.77-50.51≤-31.77PASS 1000~26500-1.77-47.57≤-31.77PASS ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:47of90 TestGraphs 11B_Ant1_2412_0~Reference 11B_Ant1_2412_30~1000 11B_Ant1_2412_1000~26500 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:48of90 11B_Ant1_2437_0~Reference 11B_Ant1_2437_30~1000 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:49of90 11B_Ant1_2437_1000~26500 11B_Ant1_2462_0~Reference 11B_Ant1_2462_30~1000 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:50of90 11B_Ant1_2462_1000~26500 11G_Ant1_2412_0~Reference

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:51of90 11G_Ant1_2412_30~1000 11G_Ant1_2412_1000~26500 11G_Ant1_2437_0~Reference ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:52of90 11G_Ant1_2437_30~1000 11G_Ant1_2437_1000~26500 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:53of90 11G_Ant1_2462_0~Reference 11G_Ant1_2462_30~1000 11G_Ant1_2462_1000~26500 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:54of90 11N20SISO_Ant1_2412_0~Reference 11N20SISO_Ant1_2412_30~1000 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:55of90 11N20SISO_Ant1_2412_1000~26500 11N20SISO_Ant1_2437_0~Reference 11N20SISO_Ant1_2437_30~1000 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:56of90 11N20SISO_Ant1_2437_1000~26500 11N20SISO_Ant1_2462_0~Reference ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:57of90 11N20SISO_Ant1_2462_30~1000 11N20SISO_Ant1_2462_1000~26500 11N40SISO_Ant1_2422_0~Reference ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:58of90 11N40SISO_Ant1_2422_30~1000 11N40SISO_Ant1_2422_1000~26500 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:59of90 11N40SISO_Ant1_2437_0~Reference 11N40SISO_Ant1_2437_30~1000 11N40SISO_Ant1_2437_1000~26500 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:60of90 11N40SISO_Ant1_2452_0~Reference 11N40SISO_Ant1_2452_30~1000 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:61of90 11N40SISO_Ant1_2452_1000~26500 Remark: Pretest9kHzto25GHz,findthehighestpointwhentesting,soonlytheworstdatawereshowninthetest report.PerFCCPart15.33(a)and15.31(o),Theamplitudeofspuriousemissionsfromintentional radiatorswhichareattenuatedmorethan20dBbelowthepermissiblevalueneednotbereportedunless specificallyrequiredelsewhereinthispart. ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:62of90 5.8RadiatedSpuriousEmissions TestRequirement:47CFRPart15CSection15.209and15.205 TestMethod:ANSIC63.102013 TestSite:MeasurementDistance:3m(Semi-AnechoicChamber) ReceiverSetup: FrequencyDetectorRBWVBWRemark 0.009MHz-0.090MHzPeak10kHz30kHzPeak 0.009MHz-0.090MHzAverage10kHz30kHzAverage 0.090MHz-0.110MHzQuasi-peak10kHz30kHzQuasi-peak 0.110MHz-0.490MHzPeak10kHz30kHzPeak 0.110MHz-0.490MHzAverage10kHz30kHzAverage 0.490MHz-30MHzQuasi-peak10kHz30kHzQuasi-peak 30MHz-1GHzQuasi-peak100kHz300kHzQuasi-peak Above1GHz Peak1MHz3MHzPeak Peak1MHz10HzAverage Limit: Frequency Fieldstrength (microvolt/meter) Limit (dBuV/m) Remark Measurement distance(m) 0.009MHz-0.490MHz2400/F(kHz)--300 0.490MHz-1.705MHz24000/F(kHz)--30 1.705MHz-30MHz30--30 30MHz-88MHz10040.0Quasi-peak3 88MHz-216MHz15043.5Quasi-peak3 216MHz-960MHz20046.0Quasi-peak3 960MHz-1GHz50054.0Quasi-peak3 Above1GHz50054.0Average3 Note:15.35(b),Unlessotherwisespecified,thelimitonpeakradiofrequency emissionsis20dBabovethemaximumpermittedaverageemissionlimit applicabletotheequipmentundertest.Thispeaklimitappliestothetotalpeak emissionlevelradiatedbythedevice. ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240801777E-01 Page:63of90 TestSetup: Figure1.Below30MHz Figure2.30MHzto1GHzFigure3.Above1GHz TestProcedure: a.1)Below1G:TheEUTwasplacedonthetopofarotatingtable0.8 metersabovethegroundata3metersemi-anechoiccamber.Thetable wasrotated360degreestodeterminethepositionofthehighest radiation. 2)Above1G:TheEUTwasplacedonthetopofarotatingtable1.5 metersabovethegroundata3metersemi-anechoiccamber.Thetable wasrotated360degreestodeterminethepositionofthehighest radiation. Note:Fortheradiatedemissiontestabove1GHz: PlacethemeasurementantennaawayfromeachareaoftheEUT determinedtobeasourceofemissionsatthespecifiedmeasurement distance,whilekeepingthemeasurementantennaaimedatthesourceof emissionsateachfrequencyofsignificantemissions,withpolarization orientedformaximumresponse.Themeasurementantennamayhaveto behigherorlowerthantheEUT,dependingontheradiationpatternofthe emissionandstayingaimedattheemissionsourceforreceivingthe maximumsignal.Thefinalmeasurementantennaelevationshallbethat whichmaximizestheemissions.Themeasurementantennaelevationfor maximumemissionsshallberestrictedtoarangeofheightsoffrom1m to4mabovethegroundorreferencegroundplane. b.TheEUTwasset3metersawayfromtheinterference-receivingantenna, whichwasmountedonthetopofavariable-heightantennatower. c.Theantennaheightisvariedfromonemetertofourmetersabovethe groundtodeterminethemaximumvalueofthefieldstrength.Both horizontalandverticalpolarizationsoftheantennaaresettomakethe measurement. 1 5 0 c m ShenzhenHuaxiaTestingTechnologyCo.,Ltd. R…

Text truncated - open the document above for the full version.