2AWDI-ACRC1ACTION CAMERA REMOTE CONTROL

Label: Location (backof product)：

Report No.: Ti-EE26070746-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 9 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2026-04-30) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen TEST REPORT Applicant: Zhongshan YangGuo Electronic Technology Co., Ltd. Address: Second and Fourth Of Three Floor, NO.9 Huayuan Road, Xiaolan Town, Zhongshan City, Guangdong Province, China. Equipment Type: ACTION CAMERA REMOTE CONTROL Model Name: ACRC1 Brand Name: LINYTUO FCC ID: 2AWDI-ACRC1 Test Standard: 47 CFR Part 2.1093 KDB 447498 D04 v01 Sample Arrival Date: Jul. 21, 2026 Test Date: Aug. 17, 2026 Date of Issue: Sep. 01, 2026 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Xiong Lining Checked by: Xu Rui Approved by: Liao Jianming (Technical Director) _______________ _______________ _______________ Report No.: Ti-EE26070746-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 9 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2026-04-30) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen Revision History Version Issue Date Revisions Content Rev. 01 Sep. 01, 2026 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 3 1.1 Test Laboratory ............................................................................................................ 3 1.2 Test Location ................................................................................................................ 3 2 PRODUCT INFORMATION ....................................................................................................... 4 2.1 Applicant Information .................................................................................................... 4 2.2 Manufacturer Information .............................................................................................. 4 2.3 General Description for Equipment under Test (EUT) ................................................... 4 2.4 Technical Information ................................................................................................... 4 3 SUMMARY OF TEST RESULT ................................................................................................. 5 3.1 Test Standards ............................................................................................................. 5 4 DEVICE CATEGORY AND LEVELS LIMITS ............................................................................. 6 5 ASSESSMENT RESULT ........................................................................................................... 8 5.1 Output Power ............................................................................................................... 8 5.2 Tune-up power ............................................................................................................. 8 5.3 RF Exposure Evaluation Result .................................................................................... 8 5.4 Conclusion .................................................................................................................... 8 Report No.: Ti-EE26070746-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 9 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2026-04-30) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen, Guangdong 1/F., Building B, Ganghongji High-Tech Intelligent Industrial Park, No.1008, Songbai Road, Yangguang Community, Xili Subdistrict, Nanshan District, Shenzhen, Guangdong Accreditation Certificate The laboratory is a testing organization accredited by FCC as a accredited testing laboratory. The designation number is CN1196. Report No.: Ti-EE26070746-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 9 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2026-04-30) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Zhongshan YangGuo Electronic Technology Co., Ltd. Address Second and Fourth Of Three Floor, NO.9 Huayuan Road, Xiaolan Town, Zhongshan City, Guangdong Province, China. 2.2 Manufacturer Information Manufacturer Zhongshan YangGuo Electronic Technology Co., Ltd. Address Second and Fourth Of Three Floor, NO.9 Huayuan Road, Xiaolan Town, Zhongshan City, Guangdong Province, China. 2.3 General Description for Equipment under Test (EUT) EUT Name ACTION CAMERA REMOTE CONTROL Model Name Under Test ACRC1 Series Model Name N/A Description of Model name differentiation N/A Hardware Version V1.0 Software Version V1.0 Dimensions (Approx.) N/A Weight (Approx.) N/A 2.4 Technical Information Network and Wireless connectivity Bluetooth (BLE) The requirement for the following technical information of the EUT was tested in this report: Operating Mode Bluetooth Frequency Range Bluetooth 2402 ~ 2480 MHz Antenna Type Bluetooth Ceramic Antenna Exposure Category General Population/Uncontrolled Exposure Product Type Portable Device Report No.: Ti-EE26070746-701 Tel: +86-755-66850100 E-mail: qc…

Text truncated - open the document above for the full version.

ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. C PAGE 1 OF 11 3.2 x 1.6 x 0.5 (mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification 1. Product Number 2. Features *Stable and reliable in performances *Low profile, compact size *RoHS 2.0 compliance *SMT processes compatible 3. Applications *ISM 2.4 GHz applications *ZigBee/BLE applications *Bluetooth earphone systems *Hand-held devices when WiFi / Bluetooth functions are needed, e.g., Smart phones *IEEE802.11 b/g/n *Wireless PCMCIA cards or USB dongles 4. Description Unictron’s AA055U ceramic chip antenna is designed for ISM 2.4GHz applications, covering frequencies 2400~2500MHz. Fabricated with proprietary design and processes, AA055U shows excellent performance and is fully compatible with SMT processes which can decrease the assembly cost and improve device’s quality and consistency. H 2 1 4 W H Z 7 0 U 3 0 1 0 ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. C PAGE 2 OF 11 5. Layout Guide & Electrical Specifications 5-1. Layout Guide (unit:mm) Solder Land Pattern: The solder land pattern (gold marking areas) is shown below. Recommendation on matching circuit will be provided according to customer’s installation conditions. ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. C PAGE 3 OF 11 5-2. Electrical Specifications (Evaluation Board Dimensions: 80 x 40 mm 2 ) 5-2-1. Electrical Table Characteristics Specifications Unit Outline Dimensions 3.2 x 1.6 x 0.5 mm Ground Plane Dimensions 80 x 40 mm Working Frequency 2400~2500 MHz VSWR (@ center frequency)* 2 Max. Characteristic Impedance 50 : Polarization Linear Polarization Peak Gain (@2442 MHz) 1.8 (typical**) dBi Efficiency 76.3 (typical**) % *Center frequency means the frequency with the lowest value in return loss of the chip antenna on the evaluation board. **A typical value is for reference only, not guaranteed. 5-2-2. Frequency vs. V.S.W.R. and Total Radiation Gain ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. C PAGE 4 OF 11 6. Outline Dimensions of Antenna & Evaluation Board (unit: mm) 6-1. Antenna Dimensions PIN Definition PIN 1 2 Soldering PAD Signal Tuning / Ground ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. C PAGE 5 OF 11 6-2. Evaluation Board with Antenna ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. C PAGE 6 OF 11 7. 3D Radiation Gain Pattern (with 80 x 40 mm 2 Evaluation Board) 3D Radiation Gain Pattern @ 2442 MHz (unit: dBi) Z X Z Y ຐ཰ࣽިמҽԖज़Ϧљ Unictron Technologies Corporation Website:www.unictron.com THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES W ITHOUT PERMISSION Prepared by : Jane Designed by :James Checked by : Mike Approved by烉Herbert TITLE烉3.2 x 1.6 x 0.5(mm) WiFi/Bluetooth Ceramic Chip Antenna (AA055U) Engineering Specification DOCUMENT H2U34W1H1Z0700 REV. NO. C PAGE 7 OF 11 8. Frequency tuning and Matching circuit 8-1. Chip antenna tuning scenarioǺ 8-2. Matching circuit烉 With the following recommended values of matching and tuning components, the center frequencies will be about 2442 MHz at our standard 80x40 mm 2 evaluation board. However, these are typical reference values which may need to be changed when circuit boards or part vendors are different. System Matching Circuit Component Location Description Vendor Tolerance 1 1.2pF, (0…

Text truncated - open the document above for the full version.

Report No.: Ti-EE26070746-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 55 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen TEST REPORT Applicant: Zhongshan YangGuo Electronic Technology Co., Ltd. Address: Second and Fourth Of Three Floor, NO.9 Huayuan Road, Xiaolan Town, Zhongshan City, Guangdong Province, China. Equipment Type: ACTION CAMERA REMOTE CONTROL Model Name: ACRC1 Brand Name: LINYTUO FCC ID: 2AWDI-ACRC1 Test Standard: 47 CFR Part 15 Subpart C (refer to section 3.1) Sample Arrival Date: Jul. 21, 2026 Test Date: Jul. 21, 2026 - Aug. 12, 2026 Date of Issue: Sep. 01, 2026 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Wang Yinglong Checked by: Li Ganming Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: Ti-EE26070746-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 55 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen Revision History Version Issue Date Revisions Rev. 01 Sep. 01, 2026 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 4 1.1 Test Laboratory ............................................................................................................ 4 1.2 Test Location ................................................................................................................ 4 2 PRODUCT INFORMATION ....................................................................................................... 5 2.1 Applicant Information .................................................................................................... 5 2.2 Manufacturer Information .............................................................................................. 5 2.3 General Description for Equipment under Test (EUT) ................................................... 5 2.4 Technical Information ................................................................................................... 6 2.5 Additional Instructions ................................................................................................... 7 3 SUMMARY OF TEST RESULTS ............................................................................................... 8 3.1 Test Standards ............................................................................................................. 8 3.2 Test Verdict .................................................................................................................. 8 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 9 4.1 Test Environments ........................................................................................................ 9 4.2 Test Equipment List ...................................................................................................... 9 4.3 Test Software List ....................................................................................................... 10 4.4 Measurement Uncertainty ........................................................................................... 10 4.5 Description of Test Setup ........................................................................................... 11 4.6 Measurement Results Explanation Example ............................................................... 14 5 TEST ITEMS ........................................................................................................................... 15 5.1 Antenna Requirements ............................................................................................... 15 5.2 Output Power ............................................................................................................. 16 5.3 Occupied Bandwidth ................................................................................................... 18 5.4 Conducted Spurious Emission .................................................................................... 20 Report No.: Ti-EE26070746-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 55 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: 601, Building 2, Intelligent Connected Vehicle Industrial Park, No.55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen 5.5 Band Edge (Authorized-band band-edge) ................................................................... 22 5.6 Conducted Emission ................................................................................................... 24 5.7 Radiated Spurious Emission ....................................................................................... 25 5.8 Band Edge (Restricted-band band-edge) .................................................................... 30 5.9 Power Spectral density (PSD) .................................................................................... 33 ANNEX A TEST RESULT ........................................................................................................... 34 A.1 Output Power ............................................................................................................. 34 A.2 Occupied Bandwidth ................................................................................................... 35 A.3 Conducted Spurious Emissions .................................................................................. 37 A.4 Band Edge (Authorized-band band-edge) ................................................................... 40 A.5 Conducted Emissions ................…

Text truncated - open the document above for the full version.