2AWEJSV-M082FFace Recognition Terminal

Page: 1 of 13 FasTer Series Quick Start Manual Page: 2 of 13 1. Hardware Connection 1) Plug in power adapter, then power on. 2) Connect the FasTer and PC with a network cable. 3) Change PC IP to 192.168.1.200, subnet mask:255.255.255.0. 4) Run “FasterManagementTool.exe”, click “Add”, will pop-up a dialog, then click “Find”. Page: 3 of 13 5) FasTer list as follow: 6) Click “Add”, then input user name and password. Default user name:“admin”,password:“admin123” 7) Login success will display as follow ： Page: 4 of 13 2. Register Staff 1)Double-click the listed FasTer to login automatically. 2) Click “Users” to register. Required to fill in personnel information, user ID and name. User ID cannot be empty and the length is less than 20 characters. User ID must be unique (not be duplicated). Click “Update” to select a photo. This photo should be less than 64KB in JPG format and less than 600 * 600 pixels. Page: 5 of 13 3)Batch import/export ： Click “ Export ” ,select a path,then click “OK”. User Information.csv and xxx.jpg are exported as follows: Uo Open “User Information.csv”: Page: 6 of 13 Fill in the sheet, at least fill in user ID, name. Copy staff photo into the same folder, fill in filename on pictures column. Click “Import”, select “User Information.csv”, then it will be imported automatically. Recommend export staff information as backup. 3. AC Settings 1) Click “Permissions” 2) Change “Display settings” as you want. Click “Confirm” for changes to take effect. Page: 7 of 13 3) Adjust the threshold for better facial recognition effect, If the accuracy rate is low, please lower the threshold, if the false accepted rate is high, please raise the threshold. 4. Temperature Settings *This section is only valid for T2. Click “Advanced”, set alarm threshold, default 37.3°C.Select work mode, default FR+TEMP. FR: Facial Recognition, TEMP: Temperature detection. Click “Confirm” 5. Change IP 1) Click “Settings” Page: 8 of 13 2) Modify network parameters, then click “Confirm”. 3) Change PC IP in same gateway, then reconnect as section 1”Hardware connection”. 6. Precautions 1) Recommend distance ： a) 500mm~2000mm (Only facial recognition) b) 500~700mm (Facial recognition and Temperature measurement) 2) Temperature measurement (T series only) a) Make sure your face is in the middle of detection windows and your forehead is in TEMP Zone, then keep it at least 1 second. b) For more accurate results, make sure your forehead is not obscured by hair, hat, etc. c) Temperature measurement data is for reference only, not for medical use 3) Tips when collecting/comparing face pictures a) Expression Keep your expression naturally when collecting or comparing face pictures, just like the expressions in the picture as below. Page: 9 of 13 Do not wear hat, sunglasses, or other accessories that can affect the facial recognition function. Do not make your hair cover your eyes, ears, etc. and heavy makeup is not allowed. b) Posture In order to get a good quality and accurate face picture, position your face looking at the camera when collecting or comparing face pictures. c) Size Make sure your face is in the middle of the collecting window. Page: 10 of 13 4) Positions when collecting/comparing face pictures (Recommended distance: 0.5m) Page: 11 of 13 7. Installation Page: 12 of 13 1) Wall Mount ： a. Remove the bottom screw of the mount with a hex key b. Remove the mount. c. Punch holes in the wall according to the fixed holes of the mount and screw the mount to the wall. d. Plug in the cable and secure FasTer A2/T2 on the mount. e. Lock the screws connecting the mount and FasTer A2/T2 with a hex key . 2) Support frame ： a. Plug in the cable and secure FasTer A2/T2 on the support frame with screws. b. Use the hex key to loosen the screw, then tighten it at the right angle. Page: 13 of 13 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Shenzhen Xinyi Technologies Co.,Ltd CONFIDENTIALITY REQUEST for Certification under the FCC Rules Date: 28th April, 2020 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the following product: FCC ID Number: 2AWEJSV-M082F Tested Model Number: SV-M082F-TC1, SV-M082F-C1, SV-M082F-FC1,SV-M082F- TFC1, FasTer A2, FasTer A2W, FasTer T2W, FasTer T2, SV-M082F-GC1, SV-M082-TGC1, FasTer A2M, FasTer T2M For the product stated above, we request that the following information be held confidential: Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days Block Diagram Schematic Diagram/ Circuit Diagram Circuit Description/ Operational Description Parts List Tune Up Information User’s Manual External Photos Internal Photos Test Setup Photos The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. Please do not hesitate to contact me if you have any queries. Yours Sincerely, Shenzhen Xinyi Technologies Co.,Ltd <Signature of Wu hongjun > ----------------------------------------------------------------------------------- Wu hongjun (Senior Product Manager) Shenzhen Xinyi Technologies Co.,Ltd 4th Floor, Main Building, Modern Building R1-A, High-tech South 4th Road, Nanshan District, Shenzhen, Guangdong, China Phone: +86 18680310570 Email: [email protected]

Shenzhen Xinyi Technologies Co.,Ltd Agent Authorization Date: 13th May, 2020 Company: Shenzhen Xinyi Technologies Co.,Ltd Address: 4th Floor, Main Building, Modern Building R1-A, High-tech South 4th Road, Nanshan District, Shenzhen, Guangdong, China Product Description: Face Recognition Terminal FCC ID Number: 2AWEJSV-M082F Tested Model Number: SV-M082F-TC1, SV-M082F-C1, SV-M082F-FC1,SV-M082F-TFC1, FasTer A2, FasTer A2W, FasTer T2W, FasTer T2, SV-M082F-GC1, SV-M082-TGC1, FasTer A2M, FasTer T2M We authorize Eurofins Product Service GmbH, Storkower Strasse 38c, D-15526 Reichenwalde, Germany, to act on our behalf on all matters concerning the certification of above mentioned equipment. We declare that Eurofins Product Service GmbH is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We, Shenzhen Xinyi Technologies Co.,Ltd, the undersigned, hereby authorize Shenzhen Toby Technology Co., Ltd. (Ivan Su, Supervisor of EMC Dep.), Shenzhen Microwave Certification Services Co., Ltd. (Gilbert Lui, Marketing Manager) and Ka.Ma.S UG (Karin Schmidt, CEO) on our behalf, to apply to the Federal Communications Commission on our equipment. We, the undersigned, hereby authorize Shenzhen Toby Technology Co., Ltd. (Ivan Su, Supervisor of EMC Dep.) to act on our behalf in matters relating to the application for a FCC equipment authorization for mentioned FCC ID Number including the signing of Form 731, necessary forms and documents in connection with this application. Any and all acts carried out by Shenzhen Toby Technology Co., Ltd. (Ivan Su, Supervisor of EMC Dep.) on our behalf shall have the same effect as acts of our own. This authorization expires on February 28, 2022 Yours Sincerely, Shenzhen Xinyi Technologies Co.,Ltd <Signature of Wu hongjun > ----------------------------------------------------------------------------------- Wu hongjun (Senior Product Manager) 4th Floor, Main Building, Modern Building R1-A, High-tech South 4th Road, Nanshan District, Shenzhen, Guangdong, China Phone: +86 18680310570 Email: [email protected]

Shenzhen Xinyi Technologies Co.,Ltd Model Declaration Letter For FCC ID : 2AWEJSV-M082F We, the undersigning company Company Name: Shenzhen Xinyi Technologies Co.,Ltd Address: 4th Floor, Main Building, Modern Building R1-A, High-tech South 4th Road, Nanshan District, Shenzhen, Guangdong, China Hereby confirm that the following products: Product description: Face Recognition Terminal Type designation: The Model(s): SV-M082F-TC1, SV-M082F-TFC1, FasTer T2W, FasTer T2, SV-M082-TGC1, FasTer T2M with temperature measurement function. The Model(s): SV-M082F-C1, SV-M082F-FC1, FasTer A2, FasTer A2W, SV-M082F-GC1, FasTer A2M without temperature measurement function. Trade name or Brand(s): GRG Banking·Xinyi That All these models are the same PCB, layout and electrical circuit, the only difference is Model Name. City and Country: Date: Name: Function:Signature: Shenzhen/China 05/13/2020 Wu hongjun Senior Product Manager

Report No.:TB-FCC172740 Page: 3 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT Temperature Measurement Function Module Report No.:TB-FCC172740 Page: 4 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT Report No.:TB-FCC172740 Page: 5 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT Report No.:TB-FCC172740 Page: 6 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT

Report No.:TB-FCC172740 Page: 2 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Appendix II ID Label Location ID LOCATION

Report No.:TB-FCC172740 Page: 1 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Appendix IFCC ID Label FCC ID: 2AWEJSV-M082F Face Recognition Terminal Shenzhen Xinyi Technologies Co.,Ltd This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Model: SV-M082F-TC1 Size for the label: 50mm X 25mm

Report No.:TB-FCC172740 Page: 7 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 9 Internal of EUT Photo 10 Internal of EUT Report No.:TB-FCC172740 Page: 8 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Photo 11 Appearance of PCB Photo 12 Appearance of PCB Report No.:TB-FCC172740 Page: 9 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Photo 13 Appearance of PCB Photo 14 Appearance of PCB Report No.:TB-FCC172740 Page: 10 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Photo 15 Appearance of PCB Photo 16 Appearance of PCB Report No.:TB-FCC172740 Page: 11 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Photo 17 Appearance of PCB Photo 18 Appearance of PCB NFC Antenna

Shenzhen Toby Technology Co., Ltd. Report No.: TB-FCC172740 Page: 1 of 39 TB-RF-074-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195 FCC Radio Test Report FCC ID: 2AWEJSV-M082F Original Grant Report No. : TB-FCC172740 Applicant : Shenzhen Xinyi Technologies Co.,Ltd Equipment Under Test (EUT) EUT Name : Face Recognition Terminal Model No. : SV-M082F-TC1 Series Model No. : SV-M082F-C1, SV-M082F-FC1,SV-M082F-TFC1, FasTer A2, FasTer A2W, FasTer T2W, FasTer T2, SV-M082F-GC1, SV-M082-TGC1, FasTer A2M, FasTer T2M S/N : 202050222040100011, 202050219040200053 Brand Name : GRG Banking·Xinyi Receipt Date : 2020-04-27 Test Date : 2020-04-28 to 2020-05-13 Issue Date : 2020-05-13 Standards : FCC Part 15, Subpart C 15.225 Test Method : ANSI C63.10: 2013 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above, Test/Witness Engineer : Garen Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TB-FCC172740 Page: 2 of 39 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 6 1.5 Description of Test Mode .................................................................................................... 7 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 8 1.8 Test Facility ........................................................................................................................... 9 2. TEST SUMMARY ..................................................................................................................... 10 3. TEST SOFTWARE ................................................................................................................... 10 4. TEST EQUIPMENT .................................................................................................................. 11 5. CONDUCTED EMISSION TEST ........................................................................................... 12 5.1 Test Standard and Limit .................................................................................................... 12 5.2 Test Setup ........................................................................................................................... 12 5.3 Test Procedure ................................................................................................................... 13 5.4 Deviation From Test Standard ......................................................................................... 13 5.5 EUT Operating Mode ........................................................................................................ 13 5.6 Test Data ............................................................................................................................. 13 6. RADIATED EMISSION TEST ................................................................................................ 14 6.1 Test Standard and Limit .................................................................................................... 14 5.2 Test Setup ........................................................................................................................... 14 6.3 Test Procedure ................................................................................................................... 15 6.4 Deviation From Test Standard ......................................................................................... 15 6.5 EUT Operating Condition ................................................................................................. 15 6.6 Test Data ............................................................................................................................. 15 7. ELECTRIC FIELD STRENGTH OF FUNDAMENTAL AND OUTSIDE THE ALLOCATED BANDS ......................................................................................................................... 16 7.1 Test Standard and Limit .................................................................................................... 16 7.2 Test Setup ........................................................................................................................... 17 7.3 Test Procedure ................................................................................................................... 17 7.4 Deviation From Test Standard ......................................................................................... 17 7.5 EUT Operating Condition ................................................................................................. 17 7.6 Test Data ............................................................................................................................. 17 8. OCCUPIED BANDWID…

Text truncated - open the document above for the full version.

Report No.:TB-FCC172740 Page: 12 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Appendix V EUT Test Photographs 15C Test Setup Photo of Setup for Radiated Emission(Below 30MHz) Report No.:TB-FCC172740 Page: 13 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Photo of Setup for Radiated Emission (Below 1 GHz) Report No.:TB-FCC172740 Page: 14 of 14 FCC ID: 2AWEJSV-M082F TB-RF-074-1.0 Photo of Setup for Conducted Emission -----END OF REPORT-----