2AWFPBOX1IoT cat litter box

Copyright ⓒ 2022. Lab-T, Inc. User Manual LavvieBoxMANUAL •Instruction manual •Contains important information for use. •Please read the manual carefully before use and use it correctly. •Please keep it so that users can check it at any time. •Please keep the instruction manual carefully. •This product is for home use and is not intended for business use. •This product does not guarantee the safety and health of pets. •This is a product that needs cleaning and maintenance. •For the health of your cat, you should change the litter bag, air filter, and deodorant according to the frequency of use, just as you change the litter periodically. •This is an IOT product that requires WIFI. •This product is an IOT general toilet, and it is possible to check and manage toilet use information transmitted through WIFI in a dedicated application, so WIFI and dedicated application installation are necessary. We ask for your understanding in advance as the appearance and operation method may change without notice due to specification changes. Index 1.Productcomposition 2.Precautions 3.Productinstallation 4.UsingLavvieBox 1.Installtheapp 2.Action:LED,FAN 5.Managementmethod 1.Excretionbed(envelope) 2.filter,deodorant 3.cleaningandwashing 6.Maintenance:lifecycle 7.problemsolvingbook 8.guarantee 9.Summarymanual(attachedsheet) Productcomposition •Please keep the packaging material. Necessary for repairs or returns. •Damaged during shipping: Please contact the courier company •Initial defect: Contact the place of purchase •Returns and Refunds: Contact the place of purchase Top Entry Mid Frame Litter pan Main body Stepper Upper front wall Upper back wall Door Upper side walls 1 Litter bag 1 Air filter 1 Gel deodorant 1 Power adapter Manual Planar figure Stepper Fan Litter pan USBport Filter cover Mid frame Upper walls Top entry Main body Door LED Front Back Basic Precautions Do not use for purposes other than the manual: cause of malfunction or fire Do not place in an environment that is not exposed to high temperature or direct sunlight: cause of failure or deformation For indoor use only. Do not pour hot water Do not place where children can handle Never disassemble, repair, or modify by yourself Do not subject to strong shocks or vibrations such as dropping, stepping on, or throwing. Do not damage the power adapter's wires and plugs. There is a risk of electric shock. ●Do not damage the AC adapter cord. Do not process, forcefully bend, pull, twist, or bundle. Do not lift or pinch heavy objects. (The code is damaged, causing fire and electric shock) ●Use in a well-ventilated state and do not pat or wrap with a cloth or duvet. (cause of fire, electric shock, malfunction) ●Do not use a damaged AC adapter cord or an outlet with a loose plug. (cause of fire, electric shock, short circuit) ●Do not remove and plug with wet hands. (Cause of electric shock and injury) ●Do not use with octopus foot wiring or cord tied together (cause of fire). •Product Features •This product installs the app as an IoT device and uses it in a WIFI registered environment. •Product features may change depending on how you use the app. •After installing the app, please register as a member and register a cat. •Function •Registration: Install the app, use the product after registration •Settings: Fan Control, USB, Filter •Because the weight sensor catches the baseline, it recognizes the use of the cat's toilet after litter grinding or about 10 minutes after disassembly and assembly. •Precautions for use •watch out for water •Assemble the parts(filter,USBcap, Litter pan, upper walls) •Weight Sensor Caution: Do not put the materials over 50kg on the product. •IoT products •As usage information goes up in the following process, app installation and WIFI registration are absolutely necessary. •PLAY STORE (QR code) •APP STORE (QR code) •First install the app. •Sign Up •Cat registration •Before using the product, prepare it in the following order. •Power connector connection •filter assembly •Deodorant attachment and stepper assembly •Litter bag installation and filling litter •upper wall assembly Product installation Product installation •Power connection •1. Since the power is on the bottom of the product, first connect the product and the power connector. •2. Insert the power cord into the groove. •Filter assembly •Remove the cover on both sides of the filter •Open the filter cover on the front of the labybox and insert the filter. •Then close the filter cover. •The filter life is about 1 month. Product installation •Deodorant and stepper assembly •Deodorant Assembly •Open the lid and remove the foil. •Close the lid and attach the double-sided tape. •attached to the inside of the stepper •The period of use is about 1 month. •Stepper assembly •The stepper has a hole at the bottom. •Check the top and bottom of the stepper and assemble. top bottom Product installation •Litter bag •Attach the litter bag with double-sided tape as shown below. •Attach double-sided tape on both sides •With the excretion bed and center frame assembled, insert the hole of the litter bag into the protrusion of the frame and fix it. •The side with the small hole is the front of the product. •Assemble from the center hole in the back. •Due to the nature of the envelope product, the hole position may be misaligned. It is not defective, so please use it accordingly. Product installation •Assemble the upper wall. •Align the ends of the parts and slide them in. •When you insert three places, lightly tap the assembly part to assemble it. •Bare hands are dangerous, use tools •Assemble all four parts of the upper wall. •When using the top cover, stably assemble it to the upper wall by hitting four places. •When using a door, assemble it by inserting it into the upper front wall before assembling the top cover. •Upper wall assembly sequence Without top entry With top entry Put it on top of the product. Product installation •Power connection •Plug the first adapter connected into…

Text truncated - open the document above for the full version.

PurrSong, Inc. D2, 179, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea Date: Dec, 05, 2022 Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 SUBJECT: Application for Certification for FCC ID: 2AWFPBOX1 To Whom It May Concern: We, the undersigned, hereby authorize SangHoon, Yu at Lab-T, Inc. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by SangHoon, Yu at Lab-T, Inc. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, (Signature) Changhyeon Bak / Project manager +82-10-8853-1250 D2, 179, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea

PurrSong, Inc. D2, 179, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AWFPBOX1 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name - Block Diagram - Schematics - Operational Description - Tune-up Procedure - 06. Block Diagram.pdf - 07. Schematics.pdf - 10. Operation Description.pdf - 12. Tune-up procedure.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for a period of 180 days Exhibit Type File Name - RF Test Setup photos - Internal Photos - User manual - 03. Test Setup Photos.pdf - 05. Internal Photos.pdf - 08. User Manual.pdf (Signature) Changhyeon Bak / Project manager +82-10-8853-1250 D2, 179, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea

Page: 1 / 4 Copyright ⓒ 2022, Lab-T, Inc. External Photos Page: 2 / 4 Copyright ⓒ 2022, Lab-T, Inc. External Photos Front Rear Page: 3 / 4 Copyright ⓒ 2022, Lab-T, Inc. External Photos Top Bottom Page: 4 / 4 Copyright ⓒ 2022, Lab-T, Inc. External Photos Left Right

Copyright ⓒ 2022. Lab-T, Inc. Label Information LavvieBOXLABEL GUIDE LavvieBOXBOTTOM Label size : 110 * 110 mm

Page: 1 / 4 Copyright ⓒ 2022. Lab-T, Inc. Internal Photos Page: 2 / 4 Copyright ⓒ 2022. Lab-T, Inc. Internal Photos Main Board Front Main Board Rear Blutooth LE Antenna 2.4 GHz WLAN Antenna Page: 3 / 4 Copyright ⓒ 2022. Lab-T, Inc. Internal Photos Sub Board Front Sub Board Rear Page: 4 / 4 Copyright ⓒ 2022. Lab-T, Inc. Internal Photos Inside

1. FCC Regulation 2. ISED Regulation Note: ƒ is frequency in MHz. *Based on nerve stimulation (NS). ** Based on specific absorption rate (SAR). RF EXPOSURE f=frequency in MHz, *= plane-wave equivalent power density 6** 1.1-10 87/ ƒ 0.5 --6** 10-2027.46 0.0730.230 300 ~ 1 500//f/1 50030 1 500 ~ 15 000//130 According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this Chapter. Limits for Maximum Permissive Exposure: RF exposure is calculated. Limits for General Population / Uncontrolled Exposure 0.3 ~ 1.346141.63*(100)30 Frequency Range Electric Field Strength [V/m] Magnetic Field Strength [A/m] Power Density [mW/cm 2 ] Averaging Time [minute] 1.34 ~ 30824/f2.19/f*(180/f2) - 30 30 ~ 30027.5 FCC ID : 2AWFPBOX1 IC : 26107-BOX1 According to RSS-102 §4 Exposure Limits, For the purpose of this standard, Industry Canada has adopted the SAR and RF field strength limits established in Health Canada’s RF exposure guideline, Safety Code 6. 18 Table 4: RF Field Strength Limits for Devices Used by the General Public (Uncontrolled Environment) Frequency Range Electric Field Strength [V/m rms] Magnetic Field Strength [A/m rms] Power Density [W/m 2 ] Reference Period [minutes] 0.003-10 21 8390-Instantaneous* 0.1-10-0.73/ ƒ 0.072826 20-48 58.07/ ƒ 0.25 0.1540/ ƒ 0.25 8.944/ ƒ 0.5 6 48-30022.060.058521.2916 300-6000 3.142 ƒ 0.3417 0.008335 ƒ 0.25 0.02619 ƒ 0.6834 6 6000-1500061.40.163106 15000-15000061.40.16310 616000/ƒ 1.2 150000-300000 0.158 ƒ 0.5 4.21 x 10 -4 ƒ 0.5 6.67 x 10 -5 ƒ616000/ƒ 1.2 Copyright ⓒ 2022. Lab-T, Inc. Page :1 / 4 3. RF Exposure Compliance Issue MPE (Maximum Permissive Exposure) Prediction Predication of MPE limit at a given distance: Equation from page 18 of OET Bulletin 65, Edition 97-01 S = power density [mW/cm 2 ] P = Power input to antenna [mW] G = Power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna [cm] The information should be included in the user’s manual: This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements.  SPGRRPGS4 4 2  Copyright ⓒ 2022. Lab-T, Inc. Page :2 / 4 ( (Limit :1.00) (Limit :5.96)R : Distance to the center of the radiation of the antenna20cm ) = 0.001 140 W/cm 2 EIRP : Equivalent Isotropic Radiated Power (mW) - NOTE P : Max tuneup Power (dBm) G : Maximum Peak Antenna Gain (dBi) Power Density at the specific separation - NOTE- S dBi -2.42dBm =0.57mW = 3.50dBm+ mW/cm 2 = 0.000 114 -5.92 - EIRP=P + G = Minimum :1.50 = EIRP / (4 X R 2 π) = S : Maximum Power Density (mW/cm 2 ) - Maximum Output Power for the Calculation :3.50 dBm Maximum :3.50 dBm The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the The MPE Calculations for this exposure is shown below. dBi (& - Maximum Peak Antenna Gain :-5.92 0.57/( 4 X 20^2 X π ) 1.00 dB- Target Power & Tolerance :2.50 dBm&± dBm) MHz - Measured RF Maximum Output Power :2.93 dBm MPE Calculations : Bluetooth LE - Frequency Range :2402 MHz~2480 Copyright ⓒ 2022. Lab-T, Inc. Page :3 / 4 ( ( 100 = 3.355 %Distance to the center of the radiation of the antenna20cm ) Limit : ≤ 100 % *In the case of WLAN, Power Density value of the module report was used. module report no. : SET2016-20460 =[ 0.001 140 /5.96]+ [ 0.198 944 /5.98]* - NOTE [ Bluetooth LE Result(W/cm2) / Limit(W/cm2) ] + Bluetooth LE + 2.4 GHz WLAN [ 2.4 GHz WLAN Result(W/cm2) / Limit(W/cm2) ] * 100 Bluetooth LE =0.001 140W/cm2 2.4 GHz WLAN =0.198 944W/cm2 - Total (%)= antenna20cm ) Limit : ≤ 100 % - NOTE Bluetooth LE =0.000 114mW/cm2 Bluetooth LE + 2.4 GHz WLAN - Total (%)= [ 0.019 894 /1]* 2.4 GHz WLAN =0.019 894 *In the case of WLAN, Power Density value of the module report was used. module report no. : SET2016-20460 = 2.001 % mW/cm2 Bluetooth LE + 2.4 GHz WLAN [ 2.4 GHz WLAN Result(mW/cm2) / Limit(mW/cm2) ] * 100 Distance to the center of the radiation of the MPE Calculations : Bluetooth LE + WLAN2.4G The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the The MPE Calculations for this exposure is shown below. simultaneous MPE for Wi-Fi and Bluetooth [ Bluetooth LE Result(mW/cm2) / Limit(mW/cm2) ] + 100 =[ 0.000 114 /1]+ Copyright ⓒ 2022. Lab-T, Inc. Page :4 / 4

REPORT No.:TRRFCC22-0016 Total 35 pages TRF-R-003(00) Page: 2 / 35 Copyright ⓒ 2022, Lab-T, Inc. CONTENTS 1. Revision history ........................................................................................................................................ 3 2. Information ................................................................................................................................................ 4 2.1 Applicant Information................................................................................................................................ 4 2.2 Test Laboratory information ..................................................................................................................... 4 2.3 Test Site ................................................................................................................................................... 4 3. Information About Test Equipment ......................................................................................................... 5 3.1 Equipment Information ............................................................................................................................. 5 3.2 Antenna Information ................................................................................................................................. 5 3.3 Test Frequency ......................................................................................................................................... 5 3.4 Operation conditions for the EUT ............................................................................................................. 5 4. Test Report ................................................................................................................................................ 6 4.1 Summary .................................................................................................................................................. 6 4.2 Measurement Uncertainty ........................................................................................................................ 6 4.3 Transmitter Requirements ........................................................................................................................ 7 4.3.1 Antenna Requirement ........................................................................................................................ 7 4.3.2 Maximum Peak Output Power........................................................................................................... 8 4.3.3 Peak Power Spectral Density .......................................................................................................... 10 4.3.4 6 dB Bandwidth(DTS Bandwidth) .................................................................................................... 13 4.3.5 Spurious Emission, Band Edge, and Restricted bands .................................................................. 17 4.3.6 Conducted Emission ....................................................................................................................... 32 APPENDIX I .................................................................................................................................................... 34 REPORT No.:TRRFCC22-0016 Total 35 pages TRF-R-003(00) Page: 3 / 35 Copyright ⓒ 2022, Lab-T, Inc. 1. Revision history Test Report No. Date Description TRRFCC22-0016 2022-12-06 Initial issue REPORT No.:TRRFCC22-0016 Total 35 pages TRF-R-003(00) Page: 4 / 35 Copyright ⓒ 2022, Lab-T, Inc. 2. Information 2.1 Applicant Information Applicant name PurrSong, Inc. Address D2, 179, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea Telephone No. +82-10-8853-1250 Person in charge Changhyeon Bak / [email protected] Manufacturer PurrSong, Inc. Address D2, 179, Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea 2.2 Test Laboratory information Corporate name Lab-T, Inc. Representative Duke (Jongyoung) Kim Address 2182-42 Baegok-daero, Mohyeon-eup, Cheoin-gu, Yongin-si, Gyeonggi-do 17036, Korea(Republic of) Telephone +82-31-322-6767 Fax +82-31-322-6768 E-mail [email protected] FCC/IC Designation No. KR0159 2.3 Test Site Test Site used Address Building L 2182-40 Baegok-daero, Mohyeon-eup, Cheoin-gu, Yongin-si, Gyeonggi-do 17036, Korea(Republic of) Building T 2182-42 Baegok-daero, Mohyeon-eup, Cheoin-gu, Yongin-si, Gyeonggi-do 17036, Korea(Republic of) Building A 2182-44 Baegok-daero, Mohyeon-eup, Cheoin-gu, Yongin-si, Gyeonggi-do 17036, Korea(Republic of) REPORT No.:TRRFCC22-0016 Total 35 pages TRF-R-003(00) Page: 5 / 35 Copyright ⓒ 2022, Lab-T, Inc. 3. Information About Test Equipment 3.1 Equipment Information Equipment type IoT cat litter box Equipment model name LavvieBox Equipment add model name - Frequency range 2 402 MHz ~ 2 480 MHz Modulation type (Symbol rate / Bit rate) GFSK (1 Msps / 1 Mbps) Modulation technology Bluetooth LE Power supply DC 12 V H/W version 1.0 S/W version 1.0 Note1: The above EUT information was declared by the manufacturer. 3.2 Antenna Information Type Model No. Gain Note PCB Antenna - -5.92 dBi Bluetooth LE PCB Antenna - 2.00 dBi 2.4 GHz WLAN 3.3 Test Frequency Test mode Test frequency (MHz) Lowest frequency Middle frequency Highest frequency Bluetooth LE 2 402 2 440 2 480 3.4 Operation conditions for the EUT Firmware state 0.2 Test software name(version) Teraterm (Version 4.86) Test power setting 6 Serial number (Setup mode) EUT #1 #1 (RF conducted measurement) EUT #2 #2 (Radiated Emission) REPORT No.:TRRFCC22-0016 Total 35 pages TRF-R-003(00) Page: 6 / 35 Copyright ⓒ 2022, Lab-T, Inc. 4. Test Report 4.1 Summary FCC Part 15 & RSS-247 Issue 2 & RSS-GEN Issue 5 FCC Rule IC Rule Parameter Clause Status Transmitter Requirements 15.203 15.247(b)(4) RSS-247 5.4(f) Antenna Requirement 4.3.1 C 15.247(b)(3) RSS-247 5.4(d) Maximum Peak Output Power 4.3.2 C 15.247(e) RSS-247 5.2(b) Peak Power Spectral Density 4.3.3 C 15.247(a)(2) RSS-247 5.2(a) 6 dB Chann…

Text truncated - open the document above for the full version.

Copyright ⓒ 2022. Lab-T, Inc. Antenna datasheet 정부3.0, 국민과의 약속 시험보고서 (TEST REPORT) 정보통신산업진흥원 수신자(Recipient) CEO of The THOU&TECH (경유) 제 목 (Subject)2.4 GHz PCB Antenna Performance Test(S220927-011) 정보통신산업진흥원장 담당 김재욱 팀장 전결 10/23 김경식 협조자 시행AIoT산업팀-5506(2022.10.24.)접수() 우306-840인천광역시 연수구 벤처로 82/http://www.nipa.kr 전화032-720-8125/전송032-720-8270/[email protected]/비공개(7) 정부3.0, 정보의 개방과 공유로 일자리는 늘고 생활은 편리해집니다. 시 험 의뢰자 (Applicant) 기관(업)명 (Company) THOU&TECH CO., KR 주소 (Address) A-F610, Pyeongchon Station High Field Knowledge Industry Center, 66, Beolmal-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Republic of Korea 의뢰일/신청번호 (Date of Application) 2022. 9. 22. / S220927-011 시료 정보 (Products) 품명/모델명 (Name/Model) 2.4 GHz PCB Antenna / PCB Pattern 일련번호 (Serial Number) - 제조사 (Manufacturer) THOU&TECH CO., KR / Korea Republic of. 시험일 (Date of Test) 2022. 9. 28. 시험 규격/방법 (Test Standard/Method) ANSI/IEEE Std 149-1979 IEEE Standard Test Procedures for Antennas / Peak Gain, Radiation Pattern(2D/3D) 시험 결과 (Test Results) Refer to Page 3 시험 담당자 (Tested by) Kim Jae Wook 검토자 (Reviewed by) Kim Kyeong Sik 주1) 본 보고서의 시험 결과 및 데이터는 의뢰자로부터 제공된 시료에 한정되며, 정보통신산업진흥원의 내부 절차에 따라 관리되고 있는 시험 장비 및 설비를 이용하여 시험한 결과입니다. Note1) The test results and data in the report are limited to samples provided by the applicant. It is the test results by experimental equipment and facilities administered by the internal procedures of NIPA. 주2) 정보통신산업진흥원의 사전 승인 없이 본 보고서의 전부 또는 일부를 재가공하여 사용할 수 없습니다. Note2) This test report shall not be reproduced in full or in part without approval of NIPA in advance. TEST REPORT Page 1/4 1. DUT information ItemsSpecificationsRemarks Product name2.4 GHz PCB Antenna Model namePCB Pattern Serial number- Operating Frequency(2.4 ~ 2.5) GHz VSWR2.0 Less Than Nominal Value Antenna Gain-7.8 dBi PolarizationLinear Input Impedance50 ohms Photograph ※ The above DUT information was provided by the applicant of the test. 2. Test information A. Equipments No.EquipmentsManufacturerModelS/N 1ZNA Network Analyzer ROHDE & SCHWARZ ZNA26101268 2Quad-ridged HornMTGQRH004060- 3Double Ridged Horn AntennaSchwarzbeck Mess BBHA 9120 LFA 253 TEST REPORT Page 2/4 B. Environment Date of testTemperatureHumidity 2022. 9. 28.(21 ± 1) °C(43 ± 3) % R.H. C. Configuration < Test configuration >< Test layout > < DUT layout >< Orientation > D. Test method: Gain-Transfer Measurements * Refer to the ANSI/IEEE Std 149-1979 IEEE Standard Test Procedures for Antennas TEST REPORT Page 3/4 3. Test result Frequency (GHz)Peak Gain (dBi) 2.400-5.9 2.440-7.8 2.450-7.8 2.485-8.7 4. Test data – 2D Radiation Patterns 2D Radiation Patterns TEST REPORT Page 4/4 – 3D Radiation Patterns 3D Radiation Patterns The end.

Page: 1 / 4 Copyright ⓒ 2022. Lab-T, Inc. Test Setup Photos Page: 2 / 4 Copyright ⓒ 2022. Lab-T, Inc. Test Setup Photos Radiated Emission_9 kHz ~ 30 MHz Test distance : 3 m, height of table : 0.8 m Radiated Emission_30 MHz ~ 1 GHz Test distance : 3 m, height of table : 0.8 m Page: 3 / 4 Copyright ⓒ 2022. Lab-T, Inc. Test Setup Photos Radiated Emission_1 GHz ~ 18 GHz Test distance : 1 m, height of table : 1.5 m Radiated Emission_18 GHz ~ 26 GHz Test distance : 1 m, height of table : 1.5 m Page: 4 / 4 Copyright ⓒ 2022. Lab-T, Inc. Test Setup Photos Conducted Emission_Front Conducted Emission_Rear