2AWUP-DD1601Remote control

Manual for the Remote Control Thanks for choosing our product. In order to better use this product, please read this manual carefully before using. This manual will guide you how to correctly use and maintain this product. Out company will keep providing you with high-quality products with the spirit of pursuing perfection and meticulosity. Thank you. Product Feature The Remote Control is exquisite and light with smooth control, long control distance, strong anti-interference capability, long service life, and beautiful appearance. It can support up to 21 key-value codes, and millions of address codes with good frequency consistency and stable performance. It is especially suitable for supporting the use of various radio remote control systems. Specifications Use Instruction 1. Please pull out the transparent battery separator at the bottom before use. 2. Press the corresponding buttons on the panel to realize the corresponding remote-control function. When a button is pressed, the LED indicator on the top of the panel will turn on. 3. Press the buttons on the panel. When receiving terminal receives the corresponding signal, corresponding function will be realized. Trouble Shooting 1.If there is no response and the indicator is still off after the remote-control button is pressed when it is used for the first time. Solution: The transparent battery separator at the bottom is not removed. Please pull it out. 2.The indicator light is on when using the remote control, but there is no response from the receiving terminal. Solution: 1) The Remote Control should be aimed at the receiving end, and ensure there is no obstruction in between to avoid remote control effect from being affected. 2) The distance is too far. Please move to a suitable distance before using the remote control. 3. After long-term use, the remote-control button does not respond after pressing and the indicator light does not turn on. Solution: The battery is low. Please replace the battery of correct type, and pay attention to the direction of the battery when installing. Explosive Hazard: DO NOT throw this product into fire, as this may cause an explosion. Attention: Non-professionals are not allowed to disassemble this product, as this may cause permanent damage. If you have any questions, please contact our company or an authorized service provider. Warranty Thank you for purchasing our product. From the date you purchase this product, you are eligible for free warranty for 1 year (batteries excluded). Warranty means that our company is responsible for repair or replacement of the products sold by the company in the event of failure or damage. All losses caused by other human factors will not be borne by the company. Repair Procedure Before requesting a repair, check the instructions to make sure that a problem indeed occurs to the product. If it cannot be resolved, please contact our company or authorized service provider and describe the cause of the failure in detail, including the product's model and usage condition. This information is very important for us to solve the problem quickly. Damages caused by the customer due to improper use or failure without following the instructions in this manual or other irresistible natural disasters, etc. are not included in the warranty. In these cases, our company will not be responsible, and the repair procedure will be carried out in accordance with the procedure stated above, but repair cost will be charged. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accep t any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party Product Name Wireless Remote Control Model DD1601 Appearance Size 86*40.5*7.5mm Battery CR2025 or CR2032，DC3V Operating Voltage 2.5V~3.4V Working Current ≤10mA Quiescent Current ≤3uA Emission Source RFID Emission Frequency 433MHz Operating Distance 8~20m (axis with no block and within operating voltage) Effective Angle 120° Surface Material 0.15mm PET Keystroke Life ≥10,000 times Operating Temperature -25°C~+55°C Storage Temperature -25°C~+55°C Weight 16g responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason able protection against harmful interference in a residential ins tallation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfere nce will not occur in a particular installation. If this equipment does cause harmful interference to radio or television receptio n, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help important announcement Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Warranty Card Model Name Purchase Date Address Service Provider (Sealed)

Ganzhou SHANGJIE Technologies Co. Ltd Land Parcel D5-2, South District of Huangpu Industrial Zone, Shangyou, Ganzhou,China Date: 2020-07-07 FCC ID: 2AWUP-DD1601 Dear Sir/Madam, We, Ganzhou SHANGJIE Technologies Co. Ltd. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: Remote control Model no.: DD1601-21,DD1601-1,DD1601-2,DD1601-3,DD1601-4,DD1601-5, DD1601-6,DD1601-7,-DD1601-8,DD1601-9,DD1601-10,DD1601-11,DD1601-12, DD1601-13,DD1601-14,DD1601-15,DD1601-16,DD1601-17,DD1601-18,DD1601-19, DD1601-20 Sincerely, Name/Title： Jianjun Zhu/ Manager Company: Ganzhou SHANGJIE Technologies Co. Ltd. Address: Land Parcel D5-2, South District of Huangpu Industrial Zone, Shangyou, Ganzhou,China Phone: +86 15815387629 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: 2020/07/07 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2AWUP-DD1601 DD1601-21,DD1601-1,DD1601-2,DD1601-3,DD1601-4, DD1601-5,DD1601-6,DD1601-7,DD1601-8,DD1601-9, DD1601-10,DD1601-11,DD1601-12,DD1601-13,DD1601-14, DD1601-15,DD1601-16,DD1601-17,DD1601-18,DD1601-19, DD1601-20 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Jianjun Zhu/ Manager Company: Ganzhou SHANGJIE Technologies Co. Ltd. Address: Land Parcel D5-2, South District of Huangpu Industrial Zone, Shangyou, Ganzhou,China Phone: +86 15815387629 E-Mail: [email protected]

Ganzhou SHANGJIE Technologies Co. Ltd. Land Parcel D5-2, South District of Huangpu Industrial Zone, Shangyou, Ganzhou,China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 07/07/2020 To whom it may concern: We, Ganzhou SHANGJIE Technologies Co. Ltd. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AWUP-DD1601 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Jianjun Zhu/ Manager Company: Ganzhou SHANGJIE Technologies Co. Ltd. Address: Land Parcel D5-2, South District of Huangpu Industrial Zone, Shangyou, Ganzhou,China Phone: +86 15815387629 E-Mail: [email protected]

GTS202004000239 Product Name: Remote control Test Model No.: DD1601-21 EUT Constructional Details External Photo Fig.1 Fig.2 GTS202004000239 Fig.3 Fig.4 GTS202004000239 Fig.5 Fig.6

FCC ID: 2AWUP-DD1601

GTS202004000239 Product Name: Remote control Test Model No.: DD1601-21 EUT Constructional Details Internal Photo Fig.1 Fig.2 GTS202004000239 Fig.3

Global United Technology Services Co., Ltd. Report No.: GTS202004000239F01 Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 20 Cover Page TEST REPORT Applicant: Ganzhou SHANGJIE Technologies Co. Ltd. Address of Applicant: Land Parcel D5-2, South District of Huangpu Industrial Zone, Shangyou, Ganzhou, China Manufacturer: Ganzhou SHANGJIE Technologies Co. Ltd. Address of Manufacturer: Land Parcel D5-2, South District of Huangpu Industrial Zone, Shangyou, Ganzhou, China Equipment Under Test (EUT) Product Name: Remote control Model No.: DD1601-21,DD1601-1,DD1601-2,DD1601-3,DD1601-4, DD1601-5,DD1601-6,DD1601-7,DD1601-8,DD1601-9, DD1601-10,DD1601-11,DD1601-12,DD1601-13,DD1601-14, DD1601-15,DD1601-16,DD1601-17,DD1601-18,DD1601-19, DD1601-20 FCC ID: 2AWUP-DD1601 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.231 Date of sample receipt: Apr.20,2020 Date of Test: Apr.20,2020- May.12,2020 Date of report issued: May.12,2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202004000239F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 20 2 Version Version No. Date Description 01 May.12,2020 Original Tested/Prepared By: Date: May.12,2020 Project Engineer Check By: Date: May.12,2020 Reviewer Report No.: GTS202004000239F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 20 3 Contents Page 1 COVER PAGE .......................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................ 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 6 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 6 5.4 TEST FACILITY .................................................................................................................................... 6 5.5 TEST LOCATION ................................................................................................................................. 6 5.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 6 5.7 DEVIATION FROM STANDARDS ............................................................................................................. 6 5.8 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 6 5.9 ADDITIONAL INSTRUCTIONS ................................................................................................................. 6 6 TEST INSTRUMENTS LIST ..................................................................................................................... 7 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1 ANTENNA REQUIREMENT .................................................................................................................... 9 7.2 RADIATED EMISSION METHOD ........................................................................................................... 10 7.3 20DB OCCUPY BANDWIDTH .............................................................................................................. 14 7.4 DWELL TIME ..................................................................................................................................... 16 7.5 DUTY CYCLE .................................................................................................................................... 17 8 TEST SETUP PHOTO ............................................................................................................................ 20 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 20 Report No.: GTS202004000239F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 20 4 Test Summary Test Item Section in CFR 47 Result Antenna Requirement 15.203 Pass Conduction Emission 15.207 N/A Field strength of the Fundament…

Text truncated - open the document above for the full version.

GTS202004000239 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 1 of 1 Product Name: Remote control Test Model No.: DD1601-21 Test Setup Photo Radiated Emission ------End------