Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Grantee also Agent for Service of Process_FCC_Attestation Statements U.S. Agent Designation for Service of Process (Applicant is Both Grantee and U.S. Agent) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant & Agent Company name: Verkada Inc FRN: 0025887894 Grantee Code: 2AWUU Contact person name: Joey Gomez Agent name: Verkada Inc Street address: 405 E. 4th Ave. ZIP/City/State San Mateo California United States 94401 Telephone number: +1 ( 510) 6033943 Email address: [email protected] Signature Contact person*: Date: Signature Agent*: Date: Note *Must be signed by both the applicant, and agent on behalf 8/13/2026 8/13/2026
Applicant Declaration QSF27-14- 04 Rev 1.3 March 4, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Verkada Inc Address 405 E. 4th Ave. San Mateo California United States 94401 FRN 0025887894 Grantee Code 2AWUU FCC ID: 2AWUU60B5301 Authorized Contact Name Joey Gomez Contact Phone +1 (510) 6033943 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14- 01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and- innovation-division/rules-regulations-title -47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Verkada Inc (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Verkada Inc (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Verkada Inc (“the applicant”) certifies that the equipment for which authorization is sought does not contain cybersecurity and anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software. Applicant Signature: Date: August 13, 2026 Print Name: Joey Gomez Title: Compliance Engineer Program Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database
Date: July 23, 2026 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Verkada Inc 405 E. 4 th Ave. SAN MATEO CA 94401 UNITED STATES Dear Sir or Madam, Due to the business consideration, we hereby declare that our product of ,Model: have as following difference: Model Difference White (Marketing different for colors) Black (Marketing different for colors) for all the specification and layout are identical except they come with different model number for marketing purposes. Any questions regarding this declaration, please don’t hesitate to contact us. Your Sincerely, Joey Gomez / Compliance Engineer Program Manager Verkada Inc Phone: +1 (510) 6033943 E-Mail: [email protected] Outdoor Wall-Mounted IP Speaker NS631-W-E-HW NS631-B-E-HW NS631-W-E-HW , NS631-B-E-HW
Date: August 13, 2026 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Verkada Inc 405 E. 4th Ave. San Mateo California United States 94401 Regarding: Confidentiality Request regarding application for FCC ID: 2AWUU60B5301 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Joey Gomez Compliance Engineer Program Manager Verkada Inc
Date: August 13, 2026 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: 2AWUU60B5301 To whom it may concern: We, the undersigned, hereby authorize Kevin Tsai / Supervisor of Compliance Certification Services Inc. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Verkada Inc This authorization is valid until further written notice from the applicant. Joey Gomez Compliance Engineer Program Manager Verkada Inc
Project No: TM-2606000069P Page 1 / 14 Report No.: TMWK2606002531KS FCC ID: 2AWUU60B5301 Rev.: 02 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City , Taiwan /新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2299-9721 www.sgs.com.tw Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group RF Exposure Evaluation Report FCC 47 CFR § 2.1091 for Outdoor Wall-Mounted IP Speaker Model Name.: NS631-W-E-HW, NS631-B-E-HW Prepared for: Verkada Inc 405 E. 4th Ave. San Mateo California United States 94401 Prepared by Compliance Certification Services Inc. Wugu Laboratory No.11, Wugong 6th Rd., Wugu Dist., New Taipei City, Taiwan. Issue Date: August 26, 2026 Note: This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, NIST or any government agencies. The test results in the report only apply to the tested sample. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可,不可部份複製。 Project No: TM-2606000069P Page 2 / 14 Report No.: TMWK2606002531KS Rev.: 02 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 August 18, 2026 Initial Issue ALL Peggy Tsai 01 August 25, 2026 See the following Note Rev.(01) P. 7, 13 Peggy Tsai 02 August 26, 2026 See the following Note Rev.(02) P. 7, 13 Peggy Tsai Rev. (01) 1. Modify antenna specification in section 3.2. 2. Modify MPE exemption option B in section 6. Rev. (02) 1. Modify antenna specification in section 3.2. 2. Modify MPE exemption option B in section 6. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可,不可部份複製。 Project No: TM-2606000069P Page 3 / 14 Report No.: TMWK2606002531KS Rev.: 02 Table of Contents 1 ATTESTATION OF TEST RESULTS ............................................................................. 4 2 TEST SPECIFICATION, METHODS AND PROCEDURES ............................................ 5 3 DEVICE UNDER TEST (DUT) INFORMATION .............................................................. 6 3.1 DUT DESCRIPTION .............................................................................................. 6 3.2 WIRELESS TECHNOLOGIES ............................................................................... 7 4 MEASUREMENT UNCERTAINTY .................................................................................. 8 5 MAXIMUM PERMISSIBLE EXPOSURE ......................................................................... 9 5.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ................................ 9 5.2 MPE CALCULATION METHOD ........................................................................... 10 5.3 MPE EXEMPTION ............................................................................................... 11 5.4 MULTIPLE RF SOURCES ................................................................................... 12 6 MPE EXEMPTION OPTION B ...................................................................................... 13 7 FACILITIES .................................................................................................................. 14 This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可,不可部份複製。 Project No: TM-2606000069P Page 4 / 14 Report No.: TMWK2606002531KS Rev.: 02 1 Attestation of Test Results Applicant Name Verkada Inc Model Name NS631-W-E-HW, NS631-B-E-HW Applicable Standards FCC 47 CFR § 2.1091 FCC 47 CFR § 1.1310 Published RF exposure KDB procedures Receive EUT Date: June 5, 2026 Date of Test: June 23, 2026 Compliance Certification Services Inc. , tested the above equipment in accordance with the requirements set forth in the above standards. Determination of compliance is based on the results of the compliance measurement,not taking into account measurement instrumentation uncertainy.All indications of Pass/Fail in this report are opinions expressed by Compliance Certification Services Inc, based on interpretations and/or observations of test results. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Approved & Released By: Tested by: Sky Zhou Asst. Section Manager KW Huang Engineer This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可,不可部份複製。 Project No: TM-2606000069P Page 5 / 14 Report No.: TMWK2606002531KS Rev.: 02 2 Test Specification, Methods and Procedures The tests documented in this report were perform…
Text truncated - open the document above for the full version.
Half dome 天線製造商(中文): 惠州硕贝德无线科技股份有限公司 天線製造商地址(英文): Huizhou Speed Wireless Technology Co., Ltd. 天線製造商地址(中文): 广东省惠州市仲恺高新区东江高新科技产业园惠泽大道138 号 天線製造商地址(英文): No.138 Huize Road, Hi-Tech Industrial Park of East River, Zhongkai Hi-tech District, Huizhou City, Guangdong Province 天線廠牌: SPEED Antenna Simulation Analysis Return loss-ANT1 Return loss-ANT2 VSWR-ANT1 VSWR-ANT2 Isolation 3D Gain Total 3D Radiation Efficiency (%) 3D Gain (dBi) Peak Gain (dBi) Frequency (MHz) 48.98 -3.13.47 2400 46.45 -3.333.572412 47.97 -3.193.83 2442 49.32 -3.074.062450 49.55 -3.054.55 2484 48.08 -3.184.662500 3D Radiation Efficiency (%) 3D Gain (dBi) Peak Gain (dBi) Frequency (MHz) 48.19 -3.175.05 2400 48.42 -3.155.37 2412 47.10 -3.274.45 2442 47.64 -3.224.04 2450 47.64 -3.224.19 2484 48.42 -3.154.38 2500 Ant1 Ant2 THE END
This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可,不可部份複製。 Project No: TM-2606000069P Page: A-1 / A-5 Report No.: TMWK2606002529KR Rev.: 02 APPENDIX-A Test Photo Radiation (9kHz ~ 30MHz) Radiation (30MHz ~ 1GHz) This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可,不可部份複製。 Project No: TM-2606000069P Page: A-2 / A-5 Report No.: TMWK2606002529KR Rev.: 02 Radiation (Above 1GHz) This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可,不可部份複製。 Project No: TM-2606000069P Page: A-3 / A-5 Report No.: TMWK2606002529KR Rev.: 02 Conducted Emission Set up Photo This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可,不可部份複製。 Project No: TM-2606000069P Page: A-4 / A-5 Report No.: TMWK2606002529KR Rev.: 02 Conduction This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可,不可部份複製。 Project No: TM-2606000069P Page: A-5 / A-5 Report No.: TMWK2606002529KR Rev.: 02
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 6.80 mW |