2AWUU60B6901Wireless Ceiling-Mounted Motion Sensor

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: (VERKADA INC, 2AWUU) Attestation Statement Reference: a) FCC CFR section 2.911(d)(5)(i) b) FCC Section 2.911(d)(5)(ii) c) FCC Section 2.911(d)(7) a) [VERKADA INC] (“the applicant”) certifies that the equipment [FCC ID: 2AWUU60B6901] for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules; b) [VERKADA INC] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) published on September 03, 2024 by Public Safety and Homeland Security Bureau (PSHSB) per Section 1.50002 of the Commission’s rules, as an entity producing “covered” equipment; c) [VERKADA INC] (“the applicant”) certifies that, the device does not have cybersecurity and/or anti-virus software produced by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered list installed on the device, nor will it be installed by the applicant any time after certification. d) [VERKADA INC] (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC Grantee Code. The service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. The applicant acknowledges that they will maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. Designated Agent VERKADA INC 405 E. 4th Ave, San Mateo, CA 94401, United States Joey Gomez, 5106033943, [email protected] FRN: 0025887894 Sincerely yours, Signed by the Applicant Name: Joey Gomez Title : Engineering Program Manager Date: January 29, 2026

Date: 2026/1/29 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: 2AWUU60B6901 Product name: Wireless Ceiling-Mounted Motion Sensor To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for FCC equipment authorization, including the signing of all documents relating to these matters. International Certification Corp. Address : No.3 -1, Lane 6, Wen San 3rd St. Kwei Shan Dist., TaoYuan City 333, Taiwan (R.O.C.) Name : Gary Chang Job Title : Manager e-mail : [email protected] Webs We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti -Drug Abuse Act of 1998, 21 U.S.C. 862. Applicant : VERKADA INC Address : 405 E. 4th Ave, San Mateo, CA 94401, United States Signature : _________________________________ Name and Job Title . : Joey Gomez/Engineering Program Manager E-mail : [email protected] Tel. : 510- 603- 3943

Date: January 29, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: 2AWUU60B6901 To whom it may concern: Short -term confidentiality Pursuant to DA 04-1705 of the Commission’s pubic notice, in order to comply with the marketing regulations in 47CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality requ est on the following attachments until 180 days after issue date ☒ Internal Photographs ☒ External Photographs ☒ User's manual ☒ Test Set up photo Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: ☒ Block Diagram ☒ Schematics ☒ Operational Description ☐ Bill of Materials ☐ Tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Applicant : VERKADA INC Address : 405 E. 4th Ave, San Mateo, CA 94401, United States Signature : _________________________________ Name and Job Title . : Joey Gomez/Engineering Program Manager E-mail : [email protected] Tel. : 510- 603- 3943

Report No.: FA5D2902 Page : 1 of 6 Report Version: Rev. 01 FCC RF Exposure Report FCC ID : 2AWUU60B6901 Equipment : Wireless Ceiling-Mounted Motion Sensor Model No. : QM21-W-HW Brand Name : Verkada Applicant : VERKADA INC Address : 405 E. 4th Ave, San Mateo, CA 94401, United States Standard : 47 CFR FCC Part 2.1091 Received Date : Dec. 29, 2025 Tested Date : Jan. 03 ~ Jan. 06, 2026 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Manager Gary Chang / Manager Report No.: FA5D2902 Page : 2 of 6 Report Version: Rev. 01 Table of Contents 1 RF EXPOSURE TEST EXEMPTIONS ................................................................................................... 4 1.1 1-mW TEST EXEMPTION ..................................................................................................................... 4 1.2 SAR-BASED EXEMPTION .................................................................................................................... 4 1.3 MPE-BASED EXEMPTION .................................................................................................................... 4 1.4 REFERENCE GUIDANCE ..................................................................................................................... 5 1.5 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE ................................... 5 1.6 MEASUREMENT UNCERTAINTY ......................................................................................................... 5 1.7 EXEMPTION CALCULATION ................................................................................................................ 5 2 TEST LABORATORY INFORMATION ................................................................................................. 6 Report No.: FA5D2902 Page : 3 of 6 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FA5D2902 Rev. 01 Initial issue Feb. 12, 2026 Report No.: FA5D2902 Page : 4 of 6 Report Version: Rev. 01 1 RF Exposure Test Exemptions 1.1 1-mW TEST EXEMPTION Available maximum time-averaged power is no more than 1 mW. 1.2 SAR-BASED EXEMPTION This exemption is applicable to the frequency range between 300 MHz and 6 GHz, with test separation distances between 0.5 cm and 40 cm, and for all RF sources in fixed, mobile, and portable device exposure conditions. The maximum time-averaged power or effective radiated power (ERP), whichever is greater, ≤ Pth Pth (mW) = ERP 20cm (d/20) x d≤20cm Pth (mW) = ERP 20cm 20 cm < d ≤40cm Where = - log 10 Pth (mW) = ERP 20cm (mW) = 2040f 0.3GHz ≤ f < 1.5 GHz Pth (mW) = ERP 20cm (mW) = 3060 1.5GHz ≤ f < 6 GHz Frequency (MHz) Power Thresholds mW dBm 663 1353 31.31 699 1426 31.54 704 1436 31.57 777 1585 32.00 824 1681 32.26 902 1840 32.65 1500 ~ 6000 3060 34.86 1.3 MPE-BASED EXEMPTION For a much wider frequency range, from 300 kHz to 100 GHz, applicable for separation distances greater or equal to λ/2π, where λ is the free-space operating wavelength in meters. Radio Source Frequency Minimum Distance Threshold ERP F L MHz F H MHz λ L / 2π λ H / 2π W 0.3 - 1.34 159 m - 35.6 m 1920 R 2 1.34 - 30 35.6 m - 1.6 m 3450 R 2 /f 2 30 - 300 1.6 m - 159 mm 3.83 R 2 300 - 1500 159 mm - 31.8 mm 0.0128 R 2 f 1500 - 100000 31.8 mm - 0.5 mm 19.2 R 2 Note: R is the antenna-person separation distance. Report No.: FA5D2902 Page : 5 of 6 Report Version: Rev. 01 1.4 REFERENCE GUIDANCE 447498 D04 Interim General RF Exposure Guidance v01. 1.5 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE None 1.6 MEASUREMENT UNCERTAINTY The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)). Parameters Uncertainty Conducted power ±0.808 dB Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. 1.7 EXEMPTION CALCULATION Frequency Range (MHz) Maximum Conducted Power (dBm) Maximum Tune Up Limit (dBm) Antenna Gain (dBi) EIRP (dBm) ERP (dBm) ERP (mW) SAR-Based Exemption Thresholds (mW) Ratio Pass/ Fail 915 ~ 915.7 (Sub-G) 18.78 19.0 1.48 20.48 18.33 68.10 1867 0.036 Pass Note: Minimum separation distance = 20 cm. Report No.: FA5D2902 Page : 6 of 6 Report Version: Rev. 01 2 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corporation (EMC and Wireless Communication Laboratory), it is our definitive objective is to institute long term, trust-based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan District. Location map can be found on our website https://www.icertifi.com.tw. Linkou Kwei Shan Kwei Shan Site II Tel: 886-2-2601-1640 Tel: 886-3-271-8666 Tel: 886-3-271-8640 No.30-2, Ding Fwu Tsuen, Lin Kou District, New Taipei City, Taiwan (R.O.C.) No.3-1, Lane 6, Wen San 3rd St., Kwei Shan Dist., Tao Yuan City 33381, Taiwan (R.O.C.) No.2-1, Lane 6, Wen San 3rd St., Kwei Shan Dist., Tao Yu…

Text truncated - open the document above for the full version.

Report No.: FR5D2902 Page : 1 of 16 Report Version: Rev. 01 FCC Test Report FCC ID : 2AWUU60B6901 Equipment : Wireless Ceiling-Mounted Motion Sensor Model No. : QM21-W-HW Brand Name : Verkada Applicant : VERKADA INC Address : 405 E. 4th Ave, San Mateo, CA 94401, United States Standard : 47 CFR FCC Part 15.247 Received Date : Dec. 29, 2025 Tested Date : Jan. 03 ~ Jan. 06, 2026 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Manager Gary Chang / Manager Report No.: FR5D2902 Page : 2 of 16 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Local Support Equipment List ................................................................................................................ 6 1.3 Test Setup Chart .................................................................................................................................... 6 1.4 The Equipment List ................................................................................................................................ 7 1.5 Test Standards ....................................................................................................................................... 8 1.6 Reference Guidance .............................................................................................................................. 8 1.7 Deviation from Test Standard and Measurement Procedure ................................................................. 8 1.8 Measurement Uncertainty ...................................................................................................................... 8 2 TEST CONFIGURATION ....................................................................................................................... 9 2.1 Testing Facility ....................................................................................................................................... 9 2.2 The Worst Test Modes and Channel Details ......................................................................................... 9 3 TRANSMITTER TEST RESULTS ....................................................................................................... 10 3.1 6dB and Occupied Bandwidth .............................................................................................................. 10 3.2 Conducted Output Power ..................................................................................................................... 11 3.3 Power Spectral Density ........................................................................................................................ 12 3.4 Unwanted Emissions into Restricted Frequency Bands ...................................................................... 13 3.5 Emissions in Non-Restricted Frequency Bands ................................................................................... 15 4 TEST LABORATORY INFORMATION ............................................................................................... 16 Appendix A. 6dB and Occupied Bandwidth Appendix B. Conducted Output Power Appendix C. Power Spectral Density Appendix D. Unwanted Emissions into Restricted Frequency Bands Appendix E. Emissions in Non-Restricted Frequency Bands Report No.: FR5D2902 Page : 3 of 16 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FR5D2902 Rev. 01 Initial issue Feb. 12, 2026 Report No.: FR5D2902 Page : 4 of 16 Report Version: Rev. 01 Summary of Test Results FCC Rules Test Items Measured Result 15.207 Conducted Emissions Note 1 N/A 15.247(d) 15.209 Radiated Emissions [dBuV/m at 3m]: 960.00MHz 42.15 (Margin -3.85dB) - PK Pass 15.247(b)(3) Maximum Output Power Max Power [dBm]: 18.78 Pass 15.247(a)(2) 6dB Bandwidth Meet the requirement of limit Pass 15.247(e) Power Spectral Density Meet the requirement of limit Pass 15.203 Antenna Requirement Meet the requirement of limit Pass N/A means Not Applicable. Note 1 : The EUT consumes DC power, so the test is not required. Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Report No.: FR5D2902 Page : 5 of 16 Report Version: Rev. 01 1 General Description 1.1 Information 1.1.1 Specification of the Equipment under Test (EUT) RF General Information Frequency Range (MHz) Ch. Freq. (MHz) Modulation Data Rate 915 ~ 916 915, 915.35, 915.70 DSSS-OQPSK 80Kbps 1.1.2 Antenna Details Brand Model Type Connector Gain (dBi) Sercomm 61721MN005 PIFA No 1.48 1.1.3 Power Supply Type of Equipment under Test (EUT) Power Supply Type 3Vdc (Powered from L91 AA Batteries *2) 1.1.4 Accessories N/A. 1.1.5 Channel List Channel MHz 0 915 10 915.35 20 915.70 1.1.6 Test Tool and Duty Cycle Test Tool Tera Term, Version: 4.105 Duty Cycle and Duty Factor Duty Cycle (%) Duty Factor (dB) 91.82% 0.37 1.1.7 Power Index of Test Tool Modulation Mode Test Frequency (MHz) 915 915.35 915.70 DSSS-OQPSK 200 200 200 Report No.: FR5D2902 Page : 6 of 16 Report Version: Rev. 01 1.2 Local Support Equipment List Support Equipment List No. Equipment Brand Model FCC ID Remarks 1 Laptop DELL…

Text truncated - open the document above for the full version.

SercommProprietary and Confidential Verkada Legolas (QM21-W -HW ) Antenna Test Report Dec. 31, 2025 Johnson YuAntenna Design Department •Antenna Structure & Placement •Return Loss •Peak Gain & Efficiency •Radiation Pattern Outline Antenna Structure & Placement 3 Ant No.FunctionOperating BandTypeMaterial FeedingP/NDimension Sub-G Antenna Sub-G868MHz ~ 915MHzPIFAMetalTrace61721MN00634.1(L) x 7(W) x 11(H) mm 3 Return Loss 4 -14 -12 -10 -8 -6 -4 -2 0 8008208408608809009209409609801000 S11 [dB] Frequency [MHz] Return Loss AirMetal Peak Gain & Efficiency 5 Table 6 Frequency (MHz) AirMetal Efficiency (%)Peak Gain (dBi)Efficiency (%)Peak Gain (dBi) 86341.750.8520.82-2.64 86845.671.3821.56-2.54 90248.872.0119.77-2.59 91544.961.4819.05-2.64 92840.621.1218.24-2.84 0 20 40 60 863868902915928 Efficiency(%) AirMetal -4 -2 0 2 4 863868902915928 Peak Gain(dBi) AirMetal Air Metal 2D Radiation Pattern -Air @868 & 915MHz 6 @ XY Plane@ XZ Plane@ YZ Plane 2D Radiation Pattern -Metal @868 & 915MHz 7 @ XY Plane@ XZ Plane@ YZ Plane 3D Radiation Pattern -Air @868MHz 3D Radiation Pattern -Air @915MHz 3D Radiation Pattern -Metal @868MHz 3D Radiation Pattern -Metal @915MHz WWW.SERCOMM.COM