2AWWH-CINSABXAInsta360 X6

Arashi Vision Inc. 11th Floor, Building 2, Jinlitong Financial Center, Bao'an District, 518000 Shenzhen, Guangdong, China Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05/11/2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AWWH-CINSABXA Arashi Vision Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Arashi Vision Inc. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Contact Name: Ya Zhou Title: Certification Engineer Tel.: +86 130 5813 9050 Fax Number: +86-0755-27798960 Email: [email protected] Signature： Arashi Vision Inc. 11th Floor, Building 2, Jinlitong Financial Center, Bao'an District, 518000 Shenzhen, Guangdong, China Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05/11/2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AWWH-CINSABXA Arashi Vision Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Contact Name: Ya Zhou Title: Certification Engineer Tel.: +86 130 5813 9050 Fax Number: +86-0755-27798960 Email: [email protected] Signature：

Arashi Vision Inc. 11th Floor, Building 2, Jinlitong Financial Center, Bao'an District, 518000 Shenzhen, Guangdong, China FCC Agent Designation for Service of Process - Certification Attestation Letter Date: 5/11/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: 2AWWH-CINSABXA Applicant Company Name: Arashi Vision Inc. Company Address: 11th Floor, Building 2, Jinlitong Financial Center, Bao'an District, 518000 Shenzhen, Guangdong, China Applicant name: Zhou Ya Email Address: [email protected] FRN: 0029763547 Per section 2.911(d)(7) of the FCC rules, Arashi Vision Inc. certifies that the equipment for which authorization is sought is designated to the following FCC Designated agent* for service of process: Company Name: Arashi Vision (U.S.) LLC Physical U.S. Company Address: 2323 Main St, Unit 16, lrvine, CA, 92614, United States Agent name: Gene Cao Tel: +1 626.244.9736 Agent Email: [email protected] FRN: 0033406828 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Sincerely yours Applicant Signed: Designated Agent Signed: Company Name Arashi Vision Inc. Arashi Vision (U.S.) LLC Printed Name: Ya Zhou Gene Cao Signed Date 5/11/2026 5/11/2026

Arashi Vision Inc. 11th Floor, Building 2, Jinlitong Financial Center, Bao'an District, 518000 Shenzhen, Guangdong, China Date: May. 12, 26 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2AWWH-CINSABXA Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below :  Block Diagram  Schematics  Operational Description  NIl Software Security The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of (up to 180) days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify TCB in the event information regarding the product or the product is made available to the public before the requested period has expired.  User Manual  Internal Photos  External Photos  Test Setup Photos Sincerely yours Applicant Signature Printed Name: Ya Zhou Title: Certification Engineer Tel.: +86 130 5813 9050 Fax Number: +86-0755-27798960 Email: [email protected]

Arashi Vision Inc. 11th Floor, Building 2, Jinlitong Financial Center, Bao'an District, 518000 Shenzhen, Guangdong, China Declaration of Authorization We Name: Arashi Vision Inc. Address: 11th Floor, Building 2, Jinlitong Financial Center, Bao'an District, 518000 Shenzhen, Guangdong, China City: Shenzhen, Guangdong Country: China Declare that: Name Representative of agent: Andrea Yan Agent Company name: DEKRA Testing and Certification (Suzhou) Co., Ltd. Address: No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China City: Suzhou Country China is authorized to apply for Certification of the following product(s): Product description: Insta360 X6 Type designation: CINSABXA Trademark: Insta360 FCC ID: 2AWWH-CINSABXA on our behalf. Date: 05/11/2026 Contact Name: Ya Zhou Title: Certification Engineer Tel.: +86 130 5813 9050 Fax Number: +86-0755-27798960 Email: [email protected] Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

E- Label 1. The information that will be displayed on the e-label and information that will remain in the user manual is shown below: Information on E-label In Manual FCC ID number Yes No 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) Yes Yes Class A / B Digital Device user manual statements* No Yes Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment1 No Yes Describe any other FCC regulatory information included in e-label* No * If the e-label includes information typically included in the manual then the e-label shall clearly differentiate between information required to be on the device’s surface and information required to be in the manual – refer to KDB 784748 D02 e labelling v02r01. E-label show： B. Access to the required information on the e-label 1. Users can access the information in no more than three steps in a device’s menu. The actual steps are: To find camera's Regulatory Information, please swipe down touch screen on your camera, then tap Settings> Certification. No special access codes or permissions are required to go through the above steps. 2. The information is stored on the device, no special accessories or supplemental plug-ins (e.g., a SIM/USIM card) are required to access the information. Yes 3. Users are provided specific instructions on how to access the information. The information to the user is provided in the Safety Guidelines. C. Labeling for Importation and Purchasing 1. Products utilizing e-labels are required to have a physical label on the product at the time of importation, marketing and sales. For devices imported in bulk and not packaged individually, a removable adhesive label or, for devices in protective bags, a label on the bags is acceptable for this purpose. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. For devices imported already in individual packages ready for sale, the information may alternatively be provided on the package. It shall contain: 1. The FCC ID and/or the SDoC logo (if applicable); and 2. Any other information required by specific rule to be provided on the surface of the product unless such information is permitted to be included in the User’s manual or other packaging inserts. The FCC ID and Model number are present on the product packaging、physical label. D. Other considerations 1. The above information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information. 2. All the applicable regulatory information required on the packaging or user instructions must be provided according to the rules even if it is displayed electronically. Yes, it is provided

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 25B0460R.705B FCC TEST REPORT Product Name Insta360 X6 Trademark Insta360 Model and /or type reference CINSABXA FCC ID 2AWWH-CINSABXA Applicant ́s name / address Arashi Vision Inc. 11th Floor, Building 2, Jinlitong Financial Center, Bao'an District, 518000 Shenzhen, Guangdong, China Test method requested, standard 47 CFR FCC Part 2 (Section 2.1093) IEEE Std 1528-2013 ANSI C95.1-2019 Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Tim Cao / Project Manager Approved by (name / position & signature) Frank He / Technical Manager Date of issue 2026-03-03 Report Version V1.0 Report template No Template_FCC SAR-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25B0460R.705B Page 2 / 69 INDEX page General conditions ........................................................................................................................................ 4 Document History ....................................................................................................................................................... 5 Statement of Compliance ............................................................................................................................................ 6 Used Equipment ......................................................................................................................................................... 7 Uncertainty ................................................................................................................................................................. 8 1 General Information.......................................................................................................................................... 11 1.1 DUT Antenna Locations.......................................................................................................................... 12 1.2 Power reduction specification ................................................................................................................. 13 1.3 Test Specification ................................................................................................................................... 14 1.4 RF exposure limits .................................................................................................................................. 15 2 SAR Measurements System Configuration ....................................................................................................... 16 2.1 DASY6 SAR System Description ............................................................................................................ 17 2.2 Applications ............................................................................................................................................ 18 2.3 Area & Zoom Scan Procedures .............................................................................................................. 18 2.4 Uncertainty of Inter-/Extrapolation and Averaging ................................................................................... 20 2.5 DASY6 E-Field Probe & EUmmWV Probe .............................................................................................. 21 2.6 Boundary Detection Unit and Probe Mounting Device ............................................................................. 23 2.7 DATA Acquisition Electronics (DAE) and Measurement Server ............................................................... 23 2.8 Robot ..................................................................................................................................................... 24 2.9 Light Beam Unit ...................................................................................................................................... 24 2.10 Device Holder......................................................................................................................................... 25 2.11 SAM Phantom ........................................................................................................................................ 26 3 Tissue Simulating Liquid................................................................................................................................... 27 3.1 The composition of the tissue simulating liquid........................................................................................ 27 3.2 Measurement for Tissue Simulate Liquid ................................................................................................ 28 4 System Check .................................................................................................................................................. 29 4.1 Justification for Extended Dipole Calibrations ......................................................................................... 30 4.2 Measurement for System Check ............................................................................................................. 31 5 Test Configuration ............................................................................................................................................ 32 5.1 SAR Test Reduction Procedure .............................................................................................................. 32 5.2 Operation Configurations ........................................................................................................................ 32 5.2.1. GSM Test Configuration ............................................................................................................... 32 5.2.2. WCDMA Test Configuration …

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25B0460R.705B_Appendix Page 1 / 16 SAR Validation Data DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25B0460R.705B_Appendix Page 2 / 16 Date: 12/18/2025 System Check Head 2450MHz Communication System: UID 0, CW; Communication System Band: D2450MHz; Duty Cycle: 1:1; Frequency: 2450 MHz; Medium parameters used: f = 2450 MHz; σ = 1.811 S/m; ε r = 38.621; ρ = 1000 kg/m 3 Ambient temperature (°C): 22.5, Liquid temperature (°C): 22.0 DASY5 Configuration: • Probe: EX3DV4 - SN7860; ConvF(7.18, 7.37, 7.31); Calibrated: 4/7/2025 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1220; Calibrated: 3/14/2025 • Phantom: ELI V8.0; Type: QD OVA 004 Ax; Serial: 2106 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Area Scan (61x61x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 21.5 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 91.33 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 24.7 W/kg SAR(1 g) = 12.6 W/kg; SAR(10 g) = 5.95 W/kg Smallest distance from peaks to all points 3 dB below = 9 mm Ratio of SAR at M2 to SAR at M1 = 51.1% Maximum value of SAR (measured) = 20.6 W/kg DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25B0460R.705B_Appendix Page 3 / 16 Date: 12/20/2025 System Check Head 5250MHz Communication System: UID 0, CW (0); Communication System Band: 5250MHz; Duty Cycle: 1:1; Frequency: 5250 MHz; Medium parameters used: f = 5250 MHz; σ = 4.496 S/m; ε r = 34.986; ρ = 1000 kg/m 3 Ambient temperature (°C): 22.5, Liquid temperature (°C): 22.0 DASY5 Configuration: • Probe: EX3DV4 - SN7860; ConvF(5.59, 5.74, 5.69); Calibrated: 4/7/2025 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1220; Calibrated: 3/14/2025 • Phantom: ELI V8.0; Type: QD OVA 004 Ax; Serial: 2106 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Area Scan (61x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.0 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 41.42 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 30.9 W/kg SAR(1 g) = 7.18 W/kg; SAR(10 g) = 2.07 W/kg Smallest distance from peaks to all points 3 dB below = 7.4 mm Ratio of SAR at M2 to SAR at M1 = 62.6% Maximum value of SAR (measured) = 18.4 W/kg DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25B0460R.705B_Appendix Page 4 / 16 Date: 12/21/2025 System Check Head 5600MHz Communication System: UID 0, CW (0); Communication System Band: D5600MHz; Duty Cycle: 1:1; Frequency: 5600 MHz; Medium parameters used: f = 5600 MHz; σ = 4.864 S/m; ε r = 34.321; ρ = 1000 kg/m 3 Ambient temperature (°C): 22.5, Liquid temperature (°C): 22.0 DASY5 Configuration: • Probe: EX3DV4 - SN7860; ConvF(5.29, 5.43, 5.39); Calibrated: 4/7/2025 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1220; Calibrated: 3/14/2025 • Phantom: ELI V8.0; Type: QD OVA 004 Ax; Serial: 2106 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Area Scan (61x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 20.2 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 40.70 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 36.9 W/kg SAR(1 g) = 7.72 W/kg; SAR(10 g) = 2.22 W/kg Smallest distance from peaks to all points 3 dB below = 7.5 mm Ratio of SAR at M2 to SAR at M1 = 59.5% Maximum value of SAR (measured) = 20.5 W/kg DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25B0460R.705B_Appendix Page 5 / 16 Date: 12/22/2025 System Check Head 5750MHz Communication System: UID 0, CW (0); Communication System Band: D5750MHz; Duty Cycle: 1:1; Frequency: 5750 MHz; Medium parameters used: f = 5750 MHz; σ = 4.989 S/m; ε r = 33.994; ρ = 1000 kg/m 3 Ambient temperature (°C): 22.5, Liquid temperature (°C): 22.0 DASY5 Configuration: • Probe: EX3DV4 - SN7860; ConvF(5.09, 5.22, 5.18); Calibrated: 4/7/2025 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1220; Calibrated: 3/14/2025 • Phantom: ELI V8.0; Type: QD OVA 004 Ax; Serial: 2106 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Area Scan (61x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 19.7 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 38.98 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 37.6 W/kg SAR(1 g) = 7.52 W/kg; SAR(10 g) = 2.15 W/kg Smallest distance from peaks to all points 3 dB below = 7.5 mm Ratio of SAR at M2 to SAR at M1 = 58% Maximum value of SAR (measured) = 20.1 W/kg DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25B0460R.705B_Appendix Page 6 / 16 SAR Test Data DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25B0460R.705B_Appendix Page 7 / 16 Date: 12/18/2025 Bluetooth_DH5-Top-CH78-2480MHz-10mm Communication System: UID 0, B…

Text truncated - open the document above for the full version.

Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is oneof the signatories to the EA Multilateral Agreement for the recognition of calibration certificates s c s Schweizerischer Kalibrierdienst Service suisse d’etalonnage Servizio svizzero di taratura Swiss Calibration Service Accreditation No.: SCS 0108 Client DEKRA Certificate No. EX-7860_Apr25 CALIBRATION CERTIFICATE Object EX3DV4 - SN:7860 Calibration procedure(s) QA CAL-01 .v1 0, QA CAL-1 2.v1 0, QA CAL-1 4.v7, QA CAL-23.V6, QA CAL-25.V8 Calibration procedure for dosimetric E-field probes Calibration date April 07, 2025 Thiscalibration certificate documentsthe traceability to national standards, whichrealizethe physical units ofmeasurements (SI). The measurements andtheuncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations havebeenconducted in theclosed laboratory facility: environment temperature (22 + 3) °C and humidity <70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID Calibration Date (Certificate No.) Sched. Cal. Power Sensor R&S NRP-33T SN: 100967 26-Mar-25 (No. 217-04290) Mar-26 Type-N mismatchcombination SN: L11 19 26-Mar-25 (No. 217-04292) Mar-26 OCP DAK-12 SN: 1016 24-Sept-24 (No. OCP-DAK12-1016_Sep24) Sep-25 OCP DAK-3.5 SN: 1249 23-Sept-24 (No. OCP-DAK3.5-1249_Sep24) Sep-25 Reference Probe EX3DV4 SN: 7349 1 0-Jan-25 (No. EX3-7349_Jan25) Jan-26 DAE4 SN: 1301 07-Nov-24 (No. DAE4-1301_Nov24) Nov-25 Secondary Standards ID Check Date (inhouse) Sched. Check ACAP 2020 Calibration Setup SN: L1404 30-Sept-24 (No. Report_ACAP2020E-Cave_20240930s) Sep-25 Certificate No: EX-7860_Apr25 Page 1 of 22

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 25B0460R.702B FCC TEST REPORT Product Name Insta360 X6 Trademark Insta360 Model and /or type reference CINSABXA FCC ID 2AWWH-CINSABXA Applicant ́s name / address Arashi Vision Inc. 11th Floor, Building 2, Jinlitong Financial Center, Bao'an District, 518000 Shenzhen, Guangdong, China Test method requested, standard 47 CFR FCC Part 15 (Section 15.247) ANSI C63.10: 2020 Verdict Summary IN COMPLIANCE Tested By (name / position & signature) Tim Cao / Project Manager Approved by (name / position & signature) Frank He / Technical Manager Date of issue 2026-03-03 Report Version V1.0 Report template No. Template_FCC Part 15C-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25B0460R.702B Page 2 / 99 INDEX page Competences and Guarantees .................................................................................................................................... 4 General conditions ...................................................................................................................................................... 4 Document History ....................................................................................................................................................... 6 Test Summary ............................................................................................................................................................ 7 Used Equipment ......................................................................................................................................................... 8 Uncertainty ............................................................................................................................................................... 10 1 General Information.......................................................................................................................................... 11 Power setting in test ......................................................................................................................................... 11 2 Description of Test Setup ................................................................................................................................. 12 3 Verdict summary section .................................................................................................................................. 13 3.1 Standards............................................................................................................................................... 13 3.2 Deviation(s) from the Standard(s) / Test Specification(s) ......................................................................... 13 4 Test Results ..................................................................................................................................................... 14 4.1 AC Power Line Conducted Emission ...................................................................................................... 14 4.1.1 Limit ............................................................................................................................................. 14 4.1.2 Test Setup .................................................................................................................................... 14 4.1.3 Test Procedure ............................................................................................................................. 14 4.2 Emissions in restricted frequency bands ................................................................................................. 15 4.2.1 Limit ............................................................................................................................................. 15 4.2.2 Test Setup .................................................................................................................................... 16 4.2.3 Test Procedure ............................................................................................................................. 17 4.3 Emissions in non-restricted frequency band ............................................................................................ 18 4.3.1 Limit ............................................................................................................................................. 18 4.3.2 Test Setup .................................................................................................................................... 18 4.3.3 Test Procedure ............................................................................................................................. 18 4.4 Duty cycle .....................................................................................................................错误!未定义书签。 4.4.1 Limit ....................................................................................................................错误!未定义书签。 4.4.2 Test Setup ...........................................................................................................错误!未定义书签。 4.4.3 Test Procedure ....................................................................................................错误!未定义书签。 4.5 Radiated Emission Band Edge ............................................................................................................... 19 4.5.1 Limit ............................................................................................................................................. 19 4.5.2 Test Setup .................................................................................................................................... 19 4.5.3 Tes…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25B0460R.702B Page 63 / 99 3DH5_Ant1_High_2480 3DH5_Ant1_Low_Hop_2402 3DH5_Ant1_High_Hop_2480 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25B0460R.702B Page 64 / 99 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-62…

Text truncated - open the document above for the full version.