2AWYKXP-365BTHERMAL BARCODE PRINTER, THERMAL RECEIPT PRINTER

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC warning: These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Zhuhai Xprinter Electronics Technology Co., Ltd. Code 00018768 Ed. 1 Device Tattoo Stencil Printer, Wireless Tattoo Machine Company name Zhuhai Xprinter Electronics Technology Co., Ltd. Grantee code 2AWYK FCC ID 2AWYKXP-365B FRN 0029777570 Contact name Xinqiang Wang Address 5/F，1st Workshop，No.613 Huawei Road， Qianshan Industrial Zone，Xiangzhou District， Zhuhai City，Guangdong Province，P.R.China Telephone number 0756-3895769 [email protected] Chipset/module information BR8051A01 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (P846 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A 3 # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or N/A 4 later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Xinqiang Wang Date: 206/02/09 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

Zhuhai Xprinter Electronics Technology Co., Ltd. Product Similarity Declaration Product name: THERMAL BARCODE PRINTER, THERMAL RECEIPT PRINTER Model: XP-365B, K200L, T890H, Q890K, Q809K, Q80A, Q80K, Q802K, S300H, E200L, V320L, V320M, Q801K, Q804S, S300M FCC ID: 2AWYKXP-365B We (Zhuhai Xprinter Electronics Technology Co., Ltd.) hereby state that all the models are electrically identical, including the same software parameters and hardware designs (such as circuit design, PCB layout, RF module/circuit, antenna type and antenna position, components on the PCB, etc.), the same mechanical structure and design (including product casing, materials, etc). only the model numbers and product colors are different. Signature: Name: Xinqiang Wang Title: Manager Place, date In China, 2026.02.09

TCB CALL página 1 File FCC ID: 2AWYKXP-365B Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://apps.dos.ny.gov/publicInquiry/EntityDisplay Google: TCB CALL página 2 State of New York department of State: TCB CALL página 3 TCB CALL página 4 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter"

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Zhuhai Xprinter Electronics Technology Co., Ltd. Grantee code: 2AWYK FCC ID: 2AWYKXP-365B FRN: 0029777570 Contact Name: Xinqiang Wang Address: 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Fax No:0756-3977067 Email: [email protected] i. [Zhuhai Xprinter Electronics Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Zhuhai Xprinter Electronics Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Zhuhai Xprinter Electronics Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2026/02/09 Applicant’s Name: Xinqiang Wang Title: Manager Signature The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

C5266091_X10_Ed.2 1/1 < Zhuhai Xprinter Electronics Technology Co., Ltd.> Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2026.02.09 Subject: Request for Confidentiality FCC ID: 2AWYKXP-365B To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Xinqiang Wang Title: Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Zhuhai Xprinter Electronics Technology Co., Ltd. Address: 5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China Product Name: THERMAL BARCODE PRINTER, THERMAL RECEIPT PRINTER Model Number: XP-365B, K200L, T890H, Q890K, Q809K, Q80A, Q80K, Q802K, S300H, E200L, V320L, V320M, Q801K, Q804S, S300M FCC Identifier: 2AWYKXP-365B We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Xinqiang Wang Date: 2026.02.09 Title: Manager Signature of applicant:

Page 1 of 4 FCC ID: 2AWYKXP-365B External Photos Page 2 of 4 Page 3 of 4 Page 4 of 4

Label (Length * Width:73.5*52.5mm)

Page 1 of 5 FCC ID: 2AWYKXP-365B Internal Photos Page 2 of 5 Page 3 of 5 Page 4 of 5 Page 5 of 5 ANT

FCC ID: 2AWYKXP-365B RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1091，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation modulation Channel Freq. (MHz) Measured power (dBm) Tune-up power (dBm) Max tune-up power (dBm) Antenna Gain Numeric Evaluation result (mW/cm2 ) Power density Limits (mW/cm2 ) BR: GFSK 2402 0.43 ±1 1.43 0.29 0.000081 1 2441 2.65 ±1 3.65 0.29 0.000135 1 2480 1.58 ±1 2.58 0.29 0.000105 1 EDR: pi/4-DQPS K 2402 0.3 ±1 1.30 0.29 0.000078 1 2441 2.61 ±1 3.61 0.29 0.000133 1 2480 1.53 ±1 2.53 0.29 0.000104 1 BLE: GFSK(1M) 2402 0.31 ±1 1.31 0.29 0.000078 1 2441 2.3 ±1 3.30 0.29 0.000124 1 2480 1.29 ±1 2.29 0.29 0.000098 1 Remark: antenna gain=-5.35dBi the worst-case situation is 0.000135, which is less than “1”, This confirmed that the device comply with FCC 1.1310 MPE limit.

ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC26020597BE-1 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage1of45 TESTREPORT Applicant:ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. Address: 5/F,1stWorkshop,No.613HuaweiRoad,QianshanIndustrialZone, XiangzhouDistrict,ZhuhaiCity,GuangdongProvince,P.R.China Manufacturer:ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. Address: 5/F,1stWorkshop,No.613HuaweiRoad,QianshanIndustrialZone, XiangzhouDistrict,ZhuhaiCity,GuangdongProvince,P.R.China Factory:ZhuhaiXprinterElectronicsTechnologyCo.,Ltd. Address: 5/F,1stWorkshop,No.613HuaweiRoad,QianshanIndustrialZone, XiangzhouDistrict,ZhuhaiCity,GuangdongProvince,P.R.China ProductName:THERMALBARCODEPRINTER,THERMALRECEIPTPRINTER ModelNumber:SeeSection1.1fordetails Trademark:Xprinter FCCID:2AWYKXP-365B TestDate: Jan.29,2026-Feb.06,2026 DateofReport: Feb.09,2026 TestResult: ThisdevicedescribedabovehasbeentestedbyBKC,andthetest resultsshowthattheequipmentundertest(EUT)isincompliance withtheFCCCFRTitle47Part15SubpartCSection15.247 requirements.Anditisapplicableonlytothetestedsampleidentified inthereport. TestProcedureUsed: Standards:FCCCFRTitle47Part15SubpartCSection15.247 ANSIC63.10-2020+Cor1-2023 Preparedby(TestEngineer): StenHuang Approved(Manager): CaseyWang Approved(Manager): JerryLiao ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC26020597BE-1 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage2of45 TABLEOFCONTENT 1.GeneralInformation......................................................................................5 1.1.DescriptionofDevice(EUT).......................................................................................................................5 1.2.ChannelList..................................................................................................................................................6 1.3.Summaryoftestresult................................................................................................................................6 1.4.SpecialAccessoriesandAuxiliaryEquipment........................................................................................7 1.5.Testmode......................................................................................................................................................7 1.6.BlockDiagram...............................................................................................................................................7 1.7.TestConditions.............................................................................................................................................7 1.8.MeasurementUncertainty(95%confidencelevels,k=2)......................................................................8 1.9.TestFacility....................................................................................................................................................8 1.10.TestEquipment...........................................................................................................................................8 2.Conductedemissionatthemainsterminalstest....................................10 2.1.Limit..............................................................................................................................................................10 2.2.TestSetup....................................................................................................................................................10 2.3.TestProcedure............................................................................................................................................10 2.4.TestResult...................................................................................................................................................11 3.RadiatedSpuriousEmissions...................................................................13 3.1.Limit..............................................................................................................................................................13 3.2.TestSetup....................................................................................................................................................14 3.3.TestProcedure............................................................................................................................................16 3.4.TestResult...................................................................................................................................................17 4.MaximumPeakOutputPower....................................................................21 4.1.Limit..............................................................................................................................................................21 4.2.TestSetup....................................................................................................................................................21 4.3.TestProcedure............................................................................................................................................21 4.4.TestResult...................................................................................................................................................21 5.-20dBBandwidthMeasurement...............................................................25 5.1.Limit..............................................................................................................................................................25 5.2.TestSetup....................................................................................................................................................25 5.3.TestProcedure............................................................................................................................................25 5.4.TestResult...........................................................................…

Text truncated - open the document above for the full version.

BluetoothantennaofPCBon-board specification 1，Index ItemContentPage Remark 1 Index 1 2SpecDrawing2 3 Specification 2 4AntennaOn Test Board3 5ReturnLoss3 6 RadiationPattern 3 DocumentType:2.4GHZcoilantenna DocumentVersion:V1.0 ReleaseDate:Sep. 27 ， 2024 Manufacturer:Zhuhai Xprinter Electronics Technology Co.,Ltd. Office add.:5/F, 1st Workshop, No.613 Huawei Road, Qianshan Industrial Zone, Xiangzhou District, Zhuhai City, Guangdong Province, P.R.China 2，SpecDrawing 3，Specification ProductNumber:2.4GHZcoilantenna SamplePhoto: EfficiencyAndGain Freq(MHz)Effi(%)Gain(dBi) 24005.05-7.38 24105.85-6.56 24206.13-6.27 24306.99-5.84 24407.18-5.88 24506.79-6.07 24606.66-5.99 24706.74-5.85 24807.93-5.35 24908.58-5.27 25008.21-5.49 Groundcopper 2.2mm+/-0.1 1mm+/-0.05 0.5mm+/-0.05 2mm+/-0.1 4，AntennaOnTestBoard 5,ReturnLoss 6，RadiationPattern RadiationPatternandGainweredependentonmeasurementboarddesign.Thespecificationof coilantennawasmeasuredbasedonthePCBsizeandinstallationpositionasshowninthe belowfigureTestBoard. Groundcopper 13x5mm EmptyArea 13x5mm 16mm 5mm 5mm 3DRadiationPattern Z Y Ground X

Page 1 of 2 FCC ID: 2AWYKXP-365B Test Photo Page 2 of 2