2AX2X-IPDDPVideo door phone with camera touch display

Quick Start Guida Rapida A New Interactive Experience )OXVK7RXFK 130mm95mm20mm2mm 25mm 42mm 262mm311mm Wall Per registrare la targa in una rete wireless, premere a lungo nella parte alta dello schermo, accedere alle impostazioni di rete, selezionare la propria rete tra quelle disponibili ed inserire i dati di accesso. To register the door station in a wireless network, long press at the top of the screen, access the network settings, select your network from those available and enter the access data. &RQƪJXUD]LRQH:,), :,),&RQƪJXUDWLRQ 90° -90° 0° 180° 45°315° 270°90° 225° 135° Vista dall’alto Top View Area a bassa copertura Low coverage area Area ad alta copertura High coverage area Vista Frontale Front View 2 0 m 1 0 m 1 5 m 1 0 m Per ottenere prestazioni migliori posizionare la targa nell’area ad alta copertura. For best performance, place the door station in the high coverage area. &ROOHJDPHQWR,QJUHVVL$OODUPH Connection of Alarm Inputs M Ingresso generico Generic input Pulsante esterno apriporta External door button IN2IN1 L Gli ingressi “IN1” e “IN2” vanno riferiti alla massa “M”. Per aggiungere un pulsante apriporta esterno, collegare il pulsante WUDLPRUVHWWL,1 R,1 H0HGDVVRFLDUHOoLQJUHVVRVFHOWRDOOoD]LRQH uscita OUTPUT nelle impostazioni della targa. The inputs “IN1” and “IN2” must refer to ground “M”. To add an external door opener button, connect the button between termi- nals IN1 (or IN2) and M and associate the chosen input with the OUTPUT output action in the door station settings. 0RUVHWWLH&RQQHWWRUL Terminals and Connectors 24V @ 0,5A RS485 - IN1 AUX1 Lock+ M RS485 + IN2 AUX1 Lock- B OIOGIBBIGBrlBr Rj-45 Plug RJ-45 EIA/TIA 568B CAT5/6 Presa di rete/ Network Socket Scheda rete/ Network Card : 10/100Mbps PoE IEEE 802.3af. A 51mm Made in italy A Porta Ethernet Ethernet port B Morsetto estraibile a 10 poli Removable 10-pole terminal C Ripristino impostazioni di fabbrica Premere per 10 secondi al riavvio Factory reset Hold for 10 seconds on reboot 51mm &ROOHJDPHQWR(OHWWURVHUUDWXUD Electric Lock Connection La targa dispone di un’uscita alimentata 9$ per l’azionamento di una serratura elettrica senza l’ausilio di un alimentatore supplementare. La serratura va connessa, seguendo lo schema del produttore, ai morsetti “/2&.” e “/2&.” rispettivamente positivo 9 HQHJDWLYR PDVVD FRQXQFDYRHOHWWULFRGLOXQJKH]]DPDVVL PD PHWUL e VH]LRQHPLQLPDPP The door station has a 12V 1A powered output for the drive of an electric lock without the aid of an additional power supply. The locks must be connected, following the manufacturer’s scheme, to the terminals “LOCK +” and “LOCK-” respectively positive (+ 12V ) and negative (earth) with an electric cable with a maximum length of 50 meters and minimum section 1,5mm. Max 50m - sez. min. 1,5mm 12V @1A LOCK+LOCK- L   2 Utilizzare un alimentatore stabilizzato 24V @0.5A tipo ICA0001. Facendo riferimento all’uscita 24V dell’alimentatore, collegare il positivo all’ingresso 24V @0,5A ed il negativo all’ingresso M sui morsetti della targa. Use a 24V @0.5A stabilized power supply like ICA0001. Referring to the 24V output of the power supply, connect the positive to the 24V @0.5A input and the negative to the M input on the door station clamps. &ROOHJDPHQWR$OLPHQWDWRUH(VWHUQR External Power Supply Connection 85 ~264 V 24V 24V @0,5A M INPUT OUTPUT L ,&$ NL v+ + v- - NL ,PRUVHWWL$8;LGHQWLƪFDQRXQoXVFLWDUHOÃ 1$ FRQFDULFRPDVVLPR supportato di 1A@24V o 1A@24V . The AUX1 terminals identify a relay output (NO) with a maximum suppor- ted load of 1A@24V or 1A@24V . &ROOHJDPHQWR8VFLWD5HOÃ Relay Output Connection Alimentatore Power Supply L AUX1 220V AUX1 AUX1AUX1 Max 24V @1A Max 24V @1A o Alimentatore Power Supply Schema di collegamento diretto Direct connection diagram 6FKHPDGLFROOHJDPHQWRWUDPLWHUHOÃGLSRWHQ]D Connection diagram via power relay Max 24V @1A Max 24V @1A o /oLQVWDOOD]LRQHZLUHOHVVVLUHDOL]]DFRQQHWWHQGRODVFKHGD:LƪD*K] integrata ad un access point o router wireless. Questo tipo di collega- mento prevede l’utilizzo di un alimentatore esterno 24V tipo ICA0001 da collegare direttamente alla targa. The wireless installation is made connecting WKHLQWHJUDWHG*K]:LƪFDUG to a wireless access point or router. This type of connection requires the use of an external 24V power supply like ICA0001 to be connected directly to the door station. Schema con collegamento di rete wireless ed alimentatore esterno Diagram with wireless network connection and external power supply ,QVWDOOD]LRQH:,), WI-FI Installation CAT 5/6 3689 Door Station Internal Units Smartphone WI-FI WI-FIRouterCloud th L’installazione LAN si realizza collegando un cavo di rete CAT5/6 tra la VFKHGDGLUHWHSRVWDVXOUHWURGHOODWDUJDHGLOURXWHU RXQRVZLWFK  Questo tipo di collegamento prevede l’utilizzo di un alimentatore ester- no 24V tipo ICA0001 da collegare direttamente alla targa. The LAN installation is made connecting a CAT5/6 network cable between the network card, located on the back of the door station, and the router (or switch). This type of connection requires the use of an external 24V power supply like ICA0001 to be connected directly to the door station. Schema di collegamento con cavo di rete CAT5/6 ed alimentatore esterno Connection diagram with CAT5/6 network cable and external power supply ,QVWDOOD]LRQH/$1 LAN Installation CAT 5/6 max 100m 3689 Door Station Internal Units Smartphone WI-FI RouterCloud th CAT 5/6 L’installazione PoE si realizza collegando un cavo di rete CAT5/6 tra la scheda di rete, posta sul retro della targa ed un Injector tipo ICA0002 od XQRVZLWFK3R(,(((DI,QTXHVWDPRGDOLW»OoDOLPHQWD]LRQHÃIRUQLWD GLUHWWDPHQWHDWWUDYHUVRLOFDYRGLUHWHSHUWDQWRQRQÃQHFHVVDULRXWLOL]- zare un alimentatore esterno. The PoE installation is made connecting a CAT5/6 network cable between the network card, located on the back of the door station and …

Text truncated - open the document above for the full version.

InfinitePlay S.r.l. – sede legale: Via Giacinto Andrea Longhin, 131 - 35129 Padova (PD) - Italy sede operativa: Via Ferreo 9, 35133 Padova (PD) - Italy tel. +39 049 706344 - email:[email protected] P.IVA / C.F. 01732330939 Padova 24/02/2021 Subject : USB interface removal We removed from our products line IP120D.xx and IP220D.xx the USB interface, because it had no functional use Below the detail InfinitePlay S.r.l. – sede legale: Via Giacinto Andrea Longhin, 131 - 35129 Padova (PD) - Italy sede operativa: Via Ferreo 9, 35133 Padova (PD) - Italy tel. +39 049 706344 - email:[email protected] P.IVA / C.F. 01732330939 Below the full final version :

Label Location on EUT Bottom Side of EUT/FCC ID Labal Location

CMC Centro Misure Compatibilità S.r.l. Via della Fisica, 20 36016 Thiene (VI) – ITALY Tel./Fax +39 0445 367702 www.cmclab.it - [email protected] Independent Testing Laboratory Accredited by ACCREDIA according to UNI CEI EN ISO/IEC 17025 cert. nr. 0168 TRF No. 15_225CMC Page 1 of 47 Test Report No. R20003601 rev.1.0 LAB N° 0168 L TEST REPORT Nr. R20003601 Federal Communication Commission (FCC) Report Reference No. ............... : R20003601 Date of issue: .............................. : 16.10.2020 Total number pages: ................... : 47 Applicant ́s name ...................... : Infiniteplay S.r.l. Address ....................................... : Giacinto Andrea Longhin, 131 – 35129 Padova (PD) – Italy Test specification: Standards ................................... : FCC Rules & Regulations, Title 47:2019 Part 15 paragraph(s): 203, 204, 205, 207, 209, 215 and 225 Non-standard test method .......... : N/A Test Report Form No. ............... : 15_225CMC Test Report Form(s) Originator .. : CMC Centro Misure Compatibilità S.r.l. Master TRF ................................. : 2020-05 General disclaimer: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of CMC Centro Misure Compatibilità S.r.l. Test item description ................ : Outdoor entrance panel Trademark .................................. : IpDoor Manufacturer ............................... : Infiniteplay S.r.l. Model / Type reference ............... : IP220D.10 FCC ID ........................................ : 2AX2X-IPDDP Rating(s) ..................................... : 24 Vdc 48 Vdc from PoE Report Tested by (name + signature) ..... : C. Panozzo .............................................................. Approved by (name + signature) .................................... : R. Beghetto .............................................................. CMC Centro Misure Compatibilità S.r.l. Via della Fisica, 20 36016 Thiene (VI) TRF No. 15_225CMC Page 2 of 47 Test Report No. R20003601 rev.1.0 LAB N° 0168 L 1 Summary 1 Summary ........................................................................................................................................... 2 2 Reference standard .......................................................................................................................... 3 3 List of attachments ............................................................................................................................ 3 4 Deviation(s) from test specification ................................................................................................... 3 5 Testing location ................................................................................................................................. 3 6 General description of test item(s) .................................................................................................... 5 6.1 Photos of the test item ................................................................................................................. 6 7 Verdict summary section .................................................................................................................. 8 8 Test conditions ................................................................................................................................10 8.1 General ......................................................................................................................................10 9 Test results .....................................................................................................................................11 9.1 Antenna requirements ...............................................................................................................11 9.2 Conducted emission ..................................................................................................................12 9.3 Radiated emissions ...................................................................................................................22 9.4 Field strength with the assigned band .......................................................................................35 9.5 Frequency tolerance ..................................................................................................................39 9.6 20 dB bandwidth ........................................................................................................................41 CMC Centro Misure Compatibilità S.r.l. Via della Fisica, 20 36016 Thiene (VI) TRF No. 15_225CMC Page 3 of 47 Test Report No. R20003601 rev.1.0 LAB N° 0168 L 2 Reference standard FCC Rules and Regulation Title 47 part 15:2019 -- 3 List of attachments Attachment 1: Instruments list, measurement uncertainty, judgement of compliance and quality manual references 4 Deviation(s) from test specification None 5 Testing location CMC Centro Misure Compatibilità S.r.l. Via della Fisica, 20 – 36016 Thiene (VI) – Italy Test site facility’s FCC registration number: 182474 Revision index Date Change history 1.0 16.10.2020 -- CMC Centro Misure Compatibilità S.r.l. Via della Fisica, 20 36016 Thiene (VI) TRF No. 15_225CMC Page 4 of 47 Test Report No. R20003601 rev.1.0 LAB N° 0168 L Testing and sampling: Date of receipt of test item ....................................................... : 07.01.2020 Testing start date ..................................................................... : 09.10.2020 Testing end date ...................................................................... : 15.10.2020 Sampling procedure ................................................................. : Equipment used for testing was picked up by the manufacturer, at the end of the production process with random criterion. The results relate to the sample as it has been received. Internal identification ...................................…

Text truncated - open the document above for the full version.

CMC Centro Misure Compatibilità S.r.l. Via della Fisica, 20 36016 Thiene (VI) – ITALY Tel./Fax +39 0445 367702 www.cmclab.it - [email protected] Independent Testing Laboratory TRF No. 15-247_HoppingCMC Page 1 of 17 Test Report No. R20258101 rev.1.0 TEST REPORT Nr. R20258101 Federal Communication Commission (FCC) Report Reference No. ............... : R20258101 Date of issue: .............................. : 23.12.2020 Total number pages: ................... : 17 Applicant ́s name ...................... : Infiniteplay S.r.l. Address ....................................... : Giacinto Andrea Longhin, 131 – 35129 Padova (PD) – Italy Test specification: Standards ................................... : KDB 447498 D01 General RF Exposure Guidance v06 Non-standard test method .......... : N/A Test Report Form No. ............... : 15-247_HoppingCMC Test Report Form(s) Originator .. : CMC Centro Misure Compatibilità S.r.l. Master TRF ................................. : 2020-01 General disclaimer: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of CMC Centro Misure Compatibilità S.r.l. Test item description ................ : Outdoor entrance panel Trademark .................................. : IpDoor Manufacturer ............................... : Infiniteplay S.r.l. Model / Type reference ............... : IP220D.10 FCC ID ........................................ : 2AX2X-IPDDP Rating(s) ..................................... : 24 Vdc 48 Vdc from PoE Report Tested by (name + signature) ..... : C. Panozzo .............................................................. Approved by (name + signature) .................................... : R. Beghetto .............................................................. CMC Centro Misure Compatibilità S.r.l. Via della Fisica, 20 36016 Thiene (VI) TRF No. 15-247_HoppingCMC Page 2 of 17 Test Report No. R20258101 rev.1.0 1 Summary 1 Summary ........................................................................................................................................... 2 2 Reference standard .......................................................................................................................... 3 3 List of attachments ............................................................................................................................ 3 4 Deviation(s) from test specification ................................................................................................... 3 5 Testing location ................................................................................................................................. 3 6 General description of test item(s) .................................................................................................... 5 6.1 Photos of the test item ................................................................................................................. 6 7 Verdict summary section .................................................................................................................. 8 8 Test conditions ................................................................................................................................10 8.1 General ......................................................................................................................................10 9 Test results .....................................................................................................................................11 9.1 RF Exposure Analysis ...............................................................................................................11 CMC Centro Misure Compatibilità S.r.l. Via della Fisica, 20 36016 Thiene (VI) TRF No. 15-247_HoppingCMC Page 3 of 17 Test Report No. R20258101 rev.1.0 2 Reference standard KDB 447498 D01 General RF Exposure Guidance v06 RF exposure procedures and equipment authorization policies for mobile and portable devices 3 List of attachments Attachment 1: Instruments list, measurement uncertainty, judgement of compliance and quality manual references 4 Deviation(s) from test specification None 5 Testing location CMC Centro Misure Compatibilità S.r.l. Via della Fisica, 20 – 36016 Thiene (VI) – Italy Test site facility’s FCC registration number: 182474 Revision index Date Change history 1.0 23.12.2020 -- CMC Centro Misure Compatibilità S.r.l. Via della Fisica, 20 36016 Thiene (VI) TRF No. 15-247_HoppingCMC Page 4 of 17 Test Report No. R20258101 rev.1.0 Testing and sampling: Date of receipt of test item ....................................................... : 07.01.2020 Testing start date ..................................................................... : 23.12.2020 Testing end date ...................................................................... : 23.12.2020 Sampling procedure ................................................................. : Equipment used for testing was picked up by the manufacturer, at the end of the production process with random criterion. The results relate to the sample as it has been received. Internal identification ................................................................ : Adhesive label with the product number P200013 General remarks: This report shall not be reproduced, except in full, without the written approval of CMC. The test results presented in this report relate only to the object tested. “(see appended table)": refers to a table appended to the report. Throughout this report a comma is used as the decimal separator. Possible test case verdicts: Test case does not apply to the test object: N/A (Not Applicable) Test object does meet the requirement: P (Pass) Test object does not meet the requirement: F (Fail) Test object does not performed: N/E (Not Executed) Definition of symbols used in this test report: ☒ Indicates that the listed condition, standard or equipment i…

Text truncated - open the document above for the full version.

CMC Centro Misure Compatibilità S.r.l. Via della Fisica, 20 36016 Thiene (VI) – ITALY Tel./Fax +39 0445 367702 www.cmclab.it - [email protected] Independent Testing Laboratory Page 1 of 2 SETUP PHOTO CMC Centro Misure Compatibilità S.r.l. Via della Fisica, 20 36016 Thiene (VI) – ITALY Tel./Fax +39 0445 367702 www.cmclab.it - [email protected] Independent Testing Laboratory Page 2 of 2